Skip to main content
Annex II Entry 1009 CMR15/10/2010

Bis(cyclopentadienyl)-bis(2,6-difluoro-3-(pyrrol-1-yl)-phenyl)titanium

Bis(cyclopentadienyl)-bis(2,6-difluoro-3-(pyrrol-1-yl)-phenyl)titanium is listed in Annex II as a prohibited substance for cosmetic products placed on the EU market.

Prohibited substance— Annex II, EU Regulation 1223/2009
Entry: 1009
CMR

Chemical identity and properties

PubChem 2D chemical structure for CAS 125051-32-3
CAS 125051-32-3PubChem CID 15250611

Titanium, bis(eta5-2,4-cyclopentadien-1-yl)bis(2,6-difluoro-3-(1H-pyrrol-1-yl)phenyl)-

IUPAC name
bis(cyclopenta-1,3-diene);bis(1-(2,4-difluorobenzene-3-id-1-yl)pyrrole);titanium(4+)
Molecular formula
C30H22F4N2Ti
Molecular weight
534.4 g/mol
Exact mass
534.1198520 Da
Topological polar surface area
9.9 Ų
Hydrogen-bond donors
0
Hydrogen-bond acceptors
8
Covalent units
5
Defined stereocentres
0

Also known as

Titanium, bis(.eta.5-2,4-cyclopentadien-1-yl)bis[2,6-difluoro-3-(1H-pyrrol-1-yl)phenyl]-irgacureRefChem:385646Titanium, bis(.eta.5-2,4-cyclopentadien-1-yl)bis2,6-difluoro-3-(1H-pyrrol-1-yl)phenyl-Titanium, bis(eta5-2,4-cyclopentadien-1-yl)bis2,6-difluoro-3-(1H-pyrrol-1-yl)phenyl-603-024-5EC 412-000-1Titanium, bis(eta5-2,4-cyclopentadien-1-yl)bis[2,6-difluoro-3-(1H-pyrrol-1-yl)phenyl]-
1 more reported name
bis(cyclopentadienyl)bis[2,6-difluoro-3-(1-pyrryl)phenyl]titanium

Evidence from additional scientific databases

NIH PubChem PUG-View
Exact identifier match15250611

Attributed physical-property, hazard, environmental and use annotations.

  • Signal: Danger Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • GHS Hazard Statements: H228: Flammable solid [Danger Flammable solids]; H361f ***: Suspected of damaging fertility [Warning Reproductive toxicity]; H373 **: May causes damage to organs through prolonged or repeated exposure [Warning Specific target organ toxicity, repeated exposure]; H411: Toxic to aquatic life with long lasting effects [Hazardous to the aquatic environment, long-term hazard] Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Precautionary Statement Codes: P203, P210, P240, P241, P260, P273, P280, P318, P319, P370+P378, P391, P405, and P501 (click each P-code to see the statement) Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Signal: Danger Source: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H228 (100%): Flammable solid [Danger Flammable solids]; H361 (100%): Suspected of damaging fertility or the unborn child [Warning Reproductive toxicity]; H373 (100%): May causes damage to organs through prolonged or repeated exposure [Warning Specific target organ toxicity, repeated exposure]; H411 (100%): Toxic to aquatic life with long lasting effects [Hazardous to the aquatic environment, long-term hazard] Source: European Chemicals Agency (ECHA)
  • Precautionary Statement Codes: P203, P210, P240, P241, P260, P273, P280, P318, P319, P370+P378, P391, P405, and P501 (click each P-code to see the statement) Source: European Chemicals Agency (ECHA)
  • ECHA C&L Notifications Summary: Aggregated GHS information provided per 125 reports by companies from 6 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Source: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: Not Classified Source: NITE-CMC
  • Signal: Danger Source: Hazardous Chemical Information System (HCIS), Safe Work Australia
  • GHS Hazard Statements: H228: Flammable solid [Danger Flammable solids]; H361f: Suspected of damaging fertility [Warning Reproductive toxicity]; H373: May causes damage to organs through prolonged or repeated exposure [Warning Specific target organ toxicity, repeated exposure]; H411: Toxic to aquatic life with long lasting effects [Hazardous to the aquatic environment, long-term hazard] Source: Hazardous Chemical Information System (HCIS), Safe Work Australia
  • Precautionary Statement Codes: P203, P210, P240, P241, P260, P273, P280, P318, P319, P370+P378, P391, P405, and P501 (click each P-code to see the statement) Source: Hazardous Chemical Information System (HCIS), Safe Work Australia

Mapped by: Existing checksum-valid CAS to unique PubChem CID match. Retrieved: 2026-08-31. Open source record

Scientific classifications and hazard annotations provide context and do not replace the market-specific regulatory decision shown above.

Additional source coverage and match status
SourceResultChecked
NIH PubChem PUG-ViewExact match2026-08-31

A recorded no-match is useful evidence that the source was checked; it is not a claim that the substance does not exist elsewhere.

Retrieved from NIH PubChem on 2026-09-02 by checksum-valid CAS matching. Chemical properties do not replace the regulatory decision on this page.

Record details

Chemical name

Bis(cyclopentadienyl)-bis(2,6-difluoro-3-(pyrrol-1-yl)-phenyl)titanium

Regulatory information

Key data

Annex
Entry number
1009

Direct matches are limited for this record, so nearby entries from Annex II are shown as well.

Annex II 1008
Nearby record in the same annex

Simazine

CAS: 122-34-9
EC: 204-535-2
Annex II 1013
Nearby record in the same annex

Phosphamidon

CAS: 13171-21-6
EC: 236-116-5

What Annex II means for Bis(cyclopentadienyl)-bis(2,6-difluoro-3-(pyrrol-1-yl)-phenyl)titanium

Bis(cyclopentadienyl)-bis(2,6-difluoro-3-(pyrrol-1-yl)-phenyl)titanium is listed as a prohibited substance under Annex II of EU Cosmetics Regulation 1223/2009 and must not be intentionally added. Article 17 separately addresses unintended small quantities that are technically unavoidable under good manufacturing practice and compatible with the Article 3 safety requirement.

Formulators must screen their ingredients and raw materials to ensure none contain this substance. Suppliers should provide documentation confirming absence when requested.

The page also surfaces 12 related annex records with overlapping identifiers, annex logic or naming patterns.

Compliance checklist

  • Verify this substance is absent from all raw materials and finished formulations.
  • Request absence confirmation or CoA from raw material suppliers.
  • Document the screening result in the Product Information File (PIF).
  • This substance has CMR classification. Review the CMR table above and verify current Annex II/III status before use.

Frequently asked questions

Yes. Bis(cyclopentadienyl)-bis(2,6-difluoro-3-(pyrrol-1-yl)-phenyl)titanium is listed in Annex II of EU Cosmetics Regulation 1223/2009 and is prohibited as an intentionally added cosmetic ingredient. Article 17 provides a narrow exception for unintended small quantities that are technically unavoidable under good manufacturing practice, provided the product remains safe under Article 3.

CAS 125051-32-3 is the unique numerical identifier assigned to Bis(cyclopentadienyl)-bis(2,6-difluoro-3-(pyrrol-1-yl)-phenyl)titanium by the Chemical Abstracts Service. In cosmetic compliance work, the CAS number is used to cross-reference the substance across regulatory databases, raw material specifications and safety assessment reports. Multiple EU annex entries may share the same CAS number if the same substance appears under different conditions or in different annexes.

Bis(cyclopentadienyl)-bis(2,6-difluoro-3-(pyrrol-1-yl)-phenyl)titanium has a CMR (carcinogenic, mutagenic or reprotoxic) classification under EU CLP Regulation. Under Article 15 of EU Cosmetics Regulation 1223/2009, CMR substances of category 1A or 1B are prohibited in cosmetics unless specifically permitted. Category 2 CMR substances may be used only if assessed safe by the SCCS. Always verify current annex status and any applicable derogations before use.

Use the INCI Checker tool on this site to paste your full ingredient list (INCI) and scan it against all Annex II–VI entries. The tool highlights any ingredients that match restricted, prohibited or allergen-flagged records. This is useful for rapid compliance screening of finished product formulas or raw material declarations.

Source note for Annex II record Bis(cyclopentadienyl)-bis(2,6-difluoro-3-(pyrrol-1-yl)-phenyl)titanium

This page summarizes one Annex II record for Bis(cyclopentadienyl)-bis(2,6-difluoro-3-(pyrrol-1-yl)-phenyl)titanium from public European Commission cosmetic materials and adds linked inventory or identifier matches when available.

Use this record page to review Annex II conditions for Bis(cyclopentadienyl)-bis(2,6-difluoro-3-(pyrrol-1-yl)-phenyl)titanium, but confirm any final regulatory decision against the current official annex wording and source files.

Tools & next steps

Check your formula

Paste a full INCI list to detect Bis(cyclopentadienyl)-bis(2,6-difluoro-3-(pyrrol-1-yl)-phenyl)titanium and other flagged EU annex records in one pass.

INCI Checker

Compare entries

Compare Bis(cyclopentadienyl)-bis(2,6-difluoro-3-(pyrrol-1-yl)-phenyl)titanium side by side with another annex record to review differences in restrictions, concentrations and annex placement.

Compare

Browse the annex

See all records in Annex II and compare regulatory conditions across substances in this annex.

Open Annex II