CAS 100-40-3
CAS 100-40-3 matches 1 EU annex record across Annex II–VI of Regulation 1223/2009.
Records for CAS 100-40-3
1 totalChemical identity and properties

Vinylcyclohexene
Vinylcyclohexene is a colorless liquid. Floats on water. (USCG, 1999) — CAMEO Chemicals
- IUPAC name
- 1-ethenylcyclohexene
- Molecular formula
- C8H12
- Molecular weight
- 108.18 g/mol
- Exact mass
- 108.093900383 Da
- XLogP3
- 2.8
- Topological polar surface area
- 0.0 Ų
- Hydrogen-bond donors
- 0
- Hydrogen-bond acceptors
- 0
- Covalent units
- 1
- Defined stereocentres
- 0
Also known as
11 more reported names
External database identifiers
Evidence from additional scientific databases
EMBL-EBI ChEBI
4-Vinylcyclohexene
- Formula
- C8H12
- Average mass
- 108.184 g/mol
- Monoisotopic mass
- 108.09390 Da
- Formal charge
- 0
- cyclic olefin — is a (CHEBI:33642)
- plastic odor agent — has role (CHEBI:747343)
- plastic odor agent — has role (CHEBI:747343)
- cyclic olefin — is a (CHEBI:33642)
Additional curated names
Cross-references from this source
- CAS: 100-40-3 — KEGG COMPOUND
- MANUAL_X_REF: C19310 — KEGG COMPOUND
Mapped by: Exact CAS cross-reference in the ChEBI compound record. Source updated: 2018-09-04. Retrieved: 2026-08-31. Open source record
NIH PubChem PUG-View
Attributed physical-property, hazard, environmental and use annotations.
- Autoignition Temperature: 517 °F (USCG, 1999) Source: CAMEO Chemicals
- Boiling Point: 259 to 261 °F at 760 mmHg (NTP, 1992) Source: CAMEO Chemicals
- Boiling Point: 145 °C @ 760 MM HG Source: Hazardous Substances Data Bank (HSDB)
- Boiling Point: 259-261 °F Source: Occupational Safety and Health Administration (OSHA)
- Density: 0.8303 at 68 °F (USCG, 1999) - Less dense than water; will float Source: CAMEO Chemicals
- Density: 0.8623 @ 15 °C/4 °C Source: Hazardous Substances Data Bank (HSDB)
- Density: 0.83 Source: Occupational Safety and Health Administration (OSHA)
- Flash Point: 60 °F (NTP, 1992) Source: CAMEO Chemicals
- Flash Point: 60 °F Source: Occupational Safety and Health Administration (OSHA)
- Melting Point: -150 °F (NTP, 1992) Source: CAMEO Chemicals
- Melting Point: -150 °F Source: Occupational Safety and Health Administration (OSHA)
- Physical Description: Vinylcyclohexene is a colorless liquid. Floats on water. (USCG, 1999) Source: CAMEO Chemicals
- Physical Description: Liquid Source: EPA Chemical Data Reporting (CDR)
- Physical Description: Colorless to slightly yellow liquid with a sweet aromatic odor at 0.5 ppm; [AIHA] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Physical Description: Colorless liquid. Source: Occupational Safety and Health Administration (OSHA)
- Refractive Index: MAXIMUM ABSORPTION (ALCOHOL): 230 NM (LOG E= 4.32); INDEX OF REFRACTION 1.4915 @ 20 °C/D Source: Hazardous Substances Data Bank (HSDB)
- Solubility: 1 to 10 mg/mL at 67.1 °F (NTP, 1992) Source: CAMEO Chemicals
- Solubility: INSOL IN WATER; SOL IN ETHER & BENZENE; VERY SOLUBLE IN METHYL ALCOHOL Source: Hazardous Substances Data Bank (HSDB)
- Vapor Pressure: 15 mmHg at 77 °F ; 25.8 mmHg at 100 °F (NTP, 1992) Source: CAMEO Chemicals
- Vapor Pressure: 15.7 [mmHg] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Vapor Pressure: 15 mmHg at 77 °F Source: Occupational Safety and Health Administration (OSHA)
- First Aid: EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.; SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. IMMEDIATELY call a hospital or poison control center even if no symptoms (such as redness or irritation) develop. IMMEDIATELY transport the victim to a hospital for treatment after washing the affected areas.; INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. IMMEDIATELY call a physician and be prepared to transport the victim to a hospital even if no symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop. Provide proper respiratory protection to rescuers entering an unknow Source: CAMEO Chemicals
- Consumer Uses: Intermediate; Adhesion/cohesion promoter; Fuel agents; Solvent Source: EPA Chemical Data Reporting (CDR)
- Industry Uses: Adhesion/cohesion promoter; Intermediate; Fuel; Fuel agents Source: EPA Chemical Data Reporting (CDR)
- Sources/Uses: Used as an intermediate; [HSDB] In the past, highest concentrations were found in personal air samples of polymer production workers (styrene/butadiene and vinylnorborene production) at about 5 ppm and in Russian rubber workers at a mean of 270 to 540 ppm. [ACGIH] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Sources/Uses: Used as a research chemical; No known commercial production for sale in the US; [HSDB] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Uses: RESEARCH CHEMICAL; CHEM INT (POSSIBLE USE) Source: Hazardous Substances Data Bank (HSDB)
Mapped by: Existing checksum-valid CAS to unique PubChem CID match. Retrieved: 2026-08-31. Open source record
Scientific classifications and hazard annotations provide context and do not replace the market-specific regulatory decision shown above.
Additional source coverage and match status
| Source | Result | Checked |
|---|---|---|
| EMBL-EBI ChEBI | Exact match | 2026-08-31 |
| NIH PubChem PUG-View | Exact match | 2026-08-31 |
A recorded no-match is useful evidence that the source was checked; it is not a claim that the substance does not exist elsewhere.
Retrieved from NIH PubChem on 2026-09-02 by checksum-valid CAS matching. Chemical properties do not replace the regulatory decision on this page.
How CAS 100-40-3 is used on this site
CAS 100-40-3 is the Chemical Abstracts Service identifier used to pin this page to a specific substance. In the current dataset, 1 EU annex record shares this identifier, which helps you cross-check whether the same substance appears under one regulatory context or several.
Use this page when a supplier specification, SDS or raw-material dossier gives you CAS 100-40-3 and you need to see every linked Annex II–VI record in one place. The entry cards above are the quickest route to concentration limits, warnings, annex placement and product-type conditions.
Frequently asked questions
Tools & next steps
Check your formula
Scan a full INCI list, then use CAS 100-40-3 to cross-check any supplier documents behind the matched substances.
INCI CheckerSearch by name
Search for INCI names, aliases or related identifiers that sit alongside CAS 100-40-3 in your documentation.
Search