4-Vinylcyclohexene
4-Vinylcyclohexene is listed in Annex II as a prohibited substance for cosmetic products placed on the EU market.
Chemical identity and properties

Vinylcyclohexene
Vinylcyclohexene is a colorless liquid. Floats on water. (USCG, 1999) — CAMEO Chemicals
- IUPAC name
- 1-ethenylcyclohexene
- Molecular formula
- C8H12
- Molecular weight
- 108.18 g/mol
- Exact mass
- 108.093900383 Da
- XLogP3
- 2.8
- Topological polar surface area
- 0.0 Ų
- Hydrogen-bond donors
- 0
- Hydrogen-bond acceptors
- 0
- Covalent units
- 1
- Defined stereocentres
- 0
Also known as
11 more reported names
External database identifiers
Evidence from additional scientific databases
EMBL-EBI ChEBI
4-Vinylcyclohexene
- Formula
- C8H12
- Average mass
- 108.184 g/mol
- Monoisotopic mass
- 108.09390 Da
- Formal charge
- 0
- cyclic olefin — is a (CHEBI:33642)
- plastic odor agent — has role (CHEBI:747343)
- plastic odor agent — has role (CHEBI:747343)
- cyclic olefin — is a (CHEBI:33642)
Additional curated names
Cross-references from this source
- CAS: 100-40-3 — KEGG COMPOUND
- MANUAL_X_REF: C19310 — KEGG COMPOUND
Mapped by: Exact CAS cross-reference in the ChEBI compound record. Source updated: 2018-09-04. Retrieved: 2026-08-31. Open source record
NIH PubChem PUG-View
Attributed physical-property, hazard, environmental and use annotations.
- Autoignition Temperature: 517 °F (USCG, 1999) Source: CAMEO Chemicals
- Boiling Point: 259 to 261 °F at 760 mmHg (NTP, 1992) Source: CAMEO Chemicals
- Boiling Point: 145 °C @ 760 MM HG Source: Hazardous Substances Data Bank (HSDB)
- Boiling Point: 259-261 °F Source: Occupational Safety and Health Administration (OSHA)
- Density: 0.8303 at 68 °F (USCG, 1999) - Less dense than water; will float Source: CAMEO Chemicals
- Density: 0.8623 @ 15 °C/4 °C Source: Hazardous Substances Data Bank (HSDB)
- Density: 0.83 Source: Occupational Safety and Health Administration (OSHA)
- Flash Point: 60 °F (NTP, 1992) Source: CAMEO Chemicals
- Flash Point: 60 °F Source: Occupational Safety and Health Administration (OSHA)
- Melting Point: -150 °F (NTP, 1992) Source: CAMEO Chemicals
- Melting Point: -150 °F Source: Occupational Safety and Health Administration (OSHA)
- Physical Description: Vinylcyclohexene is a colorless liquid. Floats on water. (USCG, 1999) Source: CAMEO Chemicals
- Physical Description: Liquid Source: EPA Chemical Data Reporting (CDR)
- Physical Description: Colorless to slightly yellow liquid with a sweet aromatic odor at 0.5 ppm; [AIHA] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Physical Description: Colorless liquid. Source: Occupational Safety and Health Administration (OSHA)
- Refractive Index: MAXIMUM ABSORPTION (ALCOHOL): 230 NM (LOG E= 4.32); INDEX OF REFRACTION 1.4915 @ 20 °C/D Source: Hazardous Substances Data Bank (HSDB)
- Solubility: 1 to 10 mg/mL at 67.1 °F (NTP, 1992) Source: CAMEO Chemicals
- Solubility: INSOL IN WATER; SOL IN ETHER & BENZENE; VERY SOLUBLE IN METHYL ALCOHOL Source: Hazardous Substances Data Bank (HSDB)
- Vapor Pressure: 15 mmHg at 77 °F ; 25.8 mmHg at 100 °F (NTP, 1992) Source: CAMEO Chemicals
- Vapor Pressure: 15.7 [mmHg] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Vapor Pressure: 15 mmHg at 77 °F Source: Occupational Safety and Health Administration (OSHA)
- First Aid: EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.; SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. IMMEDIATELY call a hospital or poison control center even if no symptoms (such as redness or irritation) develop. IMMEDIATELY transport the victim to a hospital for treatment after washing the affected areas.; INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. IMMEDIATELY call a physician and be prepared to transport the victim to a hospital even if no symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop. Provide proper respiratory protection to rescuers entering an unknow Source: CAMEO Chemicals
- Consumer Uses: Intermediate; Adhesion/cohesion promoter; Fuel agents; Solvent Source: EPA Chemical Data Reporting (CDR)
- Industry Uses: Adhesion/cohesion promoter; Intermediate; Fuel; Fuel agents Source: EPA Chemical Data Reporting (CDR)
- Sources/Uses: Used as an intermediate; [HSDB] In the past, highest concentrations were found in personal air samples of polymer production workers (styrene/butadiene and vinylnorborene production) at about 5 ppm and in Russian rubber workers at a mean of 270 to 540 ppm. [ACGIH] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Sources/Uses: Used as a research chemical; No known commercial production for sale in the US; [HSDB] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Uses: RESEARCH CHEMICAL; CHEM INT (POSSIBLE USE) Source: Hazardous Substances Data Bank (HSDB)
Mapped by: Existing checksum-valid CAS to unique PubChem CID match. Retrieved: 2026-08-31. Open source record
Scientific classifications and hazard annotations provide context and do not replace the market-specific regulatory decision shown above.
Additional source coverage and match status
| Source | Result | Checked |
|---|---|---|
| EMBL-EBI ChEBI | Exact match | 2026-08-31 |
| NIH PubChem PUG-View | Exact match | 2026-08-31 |
A recorded no-match is useful evidence that the source was checked; it is not a claim that the substance does not exist elsewhere.
Retrieved from NIH PubChem on 2026-09-02 by checksum-valid CAS matching. Chemical properties do not replace the regulatory decision on this page.
Record details
Chemical name
4-Vinylcyclohexene
Chemical / IUPAC name
4-Vinylcyclohexene
Regulatory information
CMR
| Category | Carcinogenic | Mutagenic | Reprotoxic |
|---|---|---|---|
| Cat. 2 | ✓ | — | — |
Key data
Related records for 4-Vinylcyclohexene
Direct matches are limited for this record, so nearby entries from Annex II are shown as well.
Tralkoxydim (ISO); 2-(N-ethoxypropanimidoyl)-3-hydroxy-5-mesitylcyclohex-2-en-1-one
2-Ethylhexyl 10-ethyl-4,4-dimethyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate
Cycloxydim (ISO); 2-(N-ethoxybutanimidoyl)-3-hydroxy-5-(tetrahydro-2H-thiopyran-3-yl)cyclohex-2-en-…
Aclonifen (ISO); 2-chloro-6-nitro-3-phenoxyaniline
Fluazinam (ISO); 3-chloro-N-[3-chloro-2,6-dinitro-4-(trifluoromethyl)phenyl]-5-(trifluoromethyl)pyr…
Penconazole (ISO); 1-[2-(2,4-dichlorophenyl)pentyl]-1H-1,2,4-triazole
Fenoxycarb (ISO); ethyl [2-(4-phenoxyphenoxy)ethyl]carbamate
Proquinazid (ISO); 6-iodo-2-propoxy-3-propylquinazolin-4(3H)-one
What Annex II means for 4-Vinylcyclohexene
4-Vinylcyclohexene is listed as a prohibited substance under Annex II of EU Cosmetics Regulation 1223/2009 and must not be intentionally added. Article 17 separately addresses unintended small quantities that are technically unavoidable under good manufacturing practice and compatible with the Article 3 safety requirement.
Formulators must screen their ingredients and raw materials to ensure none contain this substance. Suppliers should provide documentation confirming absence when requested.
The page also surfaces 12 related annex records with overlapping identifiers, annex logic or naming patterns.
Compliance checklist
- Verify this substance is absent from all raw materials and finished formulations.
- Request absence confirmation or CoA from raw material suppliers.
- Document the screening result in the Product Information File (PIF).
- This substance has CMR classification. Review the CMR table above and verify current Annex II/III status before use.
Frequently asked questions
Source note for Annex II record 4-Vinylcyclohexene
This page summarizes one Annex II record for 4-Vinylcyclohexene from public European Commission cosmetic materials and adds linked inventory or identifier matches when available.
Use this record page to review Annex II conditions for 4-Vinylcyclohexene, but confirm any final regulatory decision against the current official annex wording and source files.
Tools & next steps
Check your formula
Paste a full INCI list to detect 4-Vinylcyclohexene and other flagged EU annex records in one pass.
INCI CheckerCompare entries
Compare 4-Vinylcyclohexene side by side with another annex record to review differences in restrictions, concentrations and annex placement.
CompareBrowse the annex
See all records in Annex II and compare regulatory conditions across substances in this annex.
Open Annex II