InventoryRef 7943230/01/2014
POTASSIUM ALUM
Aluminum potassium bis(sulfate)
POTASSIUM ALUM is listed in the EU CosIng inventory, but no direct annex records are linked on this page yet.
Regulatory evidence by market
No rule for this ingredient has been imported for any of the 13 markets tracked here.
That describes this inventory, not the law. No imported rule is not evidence that an ingredient is permitted: a rule may exist under another name or identifier, or in a dataset not yet imported here.
Chemical identity and properties
CAS 10043-67-1PubChem CID 24856
Potassium Alum
Potassium aluminium sulfate is a metal sulfate composed of potassium, aluminium and sulfate ions in the ration 1:1:2. It has a role as a mordant, an astringent and a flame retardant. It is a potassium salt, an aluminium salt and a metal sulfate. It contains an aluminium(3+). — ChEBI
- IUPAC name
- aluminum;potassium;disulfate
- Molecular formula
- AlKO8S2
- Molecular weight
- 258.21 g/mol
- Exact mass
- 257.8487042 Da
- Topological polar surface area
- 177.0 Ų
- Hydrogen-bond donors
- 0
- Hydrogen-bond acceptors
- 8
- Covalent units
- 4
- Defined stereocentres
- 0
Also known as
Aluminum potassium sulfatePotash alumPotassium aluminum sulfatePotassium Aluminium SulfateAlaunAlum potassiumAluminum potassium alumAluminum potassium disulfate
16 more reported names
Exsiccated alumPotassium aluminum alumAlum, potassium anhydrousTai-Ace K 20Tai-Ace K 150Dialuminum dipotassium sulfateAluminum potassium sulfate, anhydrousPotassium alum anhydrousAlum, N.F.Aluminum potassium sulfate, alumAluminum potassium sulfate anhydrouspotassium aluminum disulfatePotassium aluminum sulfate (1:1:2)09OXB01F3OAluminum potassium sulfate (AlK(SO4)2)Aluminum potassium sulfate (KAl(SO4)2)
External database identifiers
- ChEBI:CHEBI:86463
- EPA DTXSID:DTXSID9039234
- PubMed:4194940
- PubMed:740662
- PubMed:712205
Evidence from additional scientific databases
EMBL-EBI ChEBI
Exact identifier matchCHEBI:86463
potassium aluminium sulfate
A metal sulfate composed of potassium, aluminium and sulfate ions in the ration 1:1:2.
- Formula
- Al.K.2O4S
- Average mass
- 258.206 g/mol
- Monoisotopic mass
- 257.84870 Da
- Formal charge
- 0
- potassium salt — is a (CHEBI:26218)
- aluminium salt — is a (CHEBI:35510)
- metal sulfate — is a (CHEBI:51336)
- flame retardant — has role (CHEBI:79314)
- mordant — has role (CHEBI:74152)
- astringent — has role (CHEBI:74783)
- aluminium(3+) — has part (CHEBI:49470)
- flame retardant — has role (CHEBI:79314)
- mordant — has role (CHEBI:74152)
- astringent — has role (CHEBI:74783)
- potassium salt — is a (CHEBI:26218)
- aluminium salt — is a (CHEBI:35510)
- metal sulfate — is a (CHEBI:51336)
Additional curated names
aluminium potassium sulfate (1/1/2)AlK(SO4)2Aluminium potassium bis(sulphate)Aluminum potassium alumAluminum potassium disulfateAluminum potassium sulfateBurnt potassium alumPotash alumPotassium alumPotassium aluminum alumpotassium aluminum disulfate
Cross-references from this source
- CAS: 10043-67-1 — ChemIDplus
- REGISTRY_NUMBER: 11323401 — Reaxys
- REGISTRY_NUMBER: 27446053 — Reaxys
- MANUAL_X_REF: Potassium_alum — Wikipedia
Mapped by: Exact CAS cross-reference in the ChEBI compound record. Source updated: 2015-07-14. Retrieved: 2026-08-31. Open source record
NIH PubChem PUG-View
Exact identifier match24856
Attributed physical-property, hazard, environmental and use annotations.
- Boiling Point: 200 °C Source: DrugBank
- Color/Form: WHITE POWDER Source: Hazardous Substances Data Bank (HSDB)
- Density: 1.725 Source: Hazardous Substances Data Bank (HSDB)
- Density: ODORLESS; SWEETISH, ASTRINGENT TASTE; DENSITY 1.725; MP 92.5 °C. /POTASSIUM ALUM DODECAHYDRATE/ Source: Hazardous Substances Data Bank (HSDB)
- Melting Point: 92.5 °C Source: DrugBank
- Physical Description: Dry Powder; Large Crystals; Dry Powder Source: EPA Chemical Data Reporting (CDR)
- Physical Description: Large, transparent crystals or white crystalline powder Source: EU Food Improvement Agents
- Physical Description: White hygroscopic solid; [Merck Index] Colorless odorless crystals; Partially soluble in water; [MSDSonline] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Refractive Index: INDEX OF REFRACTION: 1.454, 1.4564; HEXAGONAL: 1.456, 1.429 /POTASSIUM ALUM DODECAHYDRATE/ Source: Hazardous Substances Data Bank (HSDB)
- Solubility: 1 g/ 7.5 ml at 25ºC Source: DrugBank
- Solubility: Freely soluble in water, insoluble in ethanol Source: EU Food Improvement Agents
- Solubility: BECOMES ANHYD @ ABOUT 200 °C; @ HIGHER TEMP LOSES SULFUR TRIOXIDE & BECOMES BASIC & INCOMPLETELY SOL IN WATER. /POTASSIUM ALUM DODECAHYDRATE/ Source: Hazardous Substances Data Bank (HSDB)
- Solubility: 1 G DISSOLVES IN ABOUT 20 ML COLD WATER, ABOUT 1 ML BOILING WATER, INCOMPLETELY; PRACTICALLY INSOL IN ALC. Source: Hazardous Substances Data Bank (HSDB)
- pH: Between 3,0 and 4,0 (10 % solution) Source: EU Food Improvement Agents
- Carcinogen Classification: Not listed by IARC. IARC classified aluminum production as carcinogenic to humans (Group 1), but did not implicate aluminum itself as a human carcinogen. (L135) A link between use of aluminum-containing antiperspirants and increased risk of breast cancer has been proposed (A235), but studies have not been able to establish a clear link (A15468). Source: Toxin and Toxin Target Database (T3DB)
- Exposure Routes: Oral (L739) ; inhalation (L739) Source: Toxin and Toxin Target Database (T3DB)
- Note: This chemical does not meet GHS hazard criteria for 97.8% (135 of 138) of all reports. Source: European Chemicals Agency (ECHA)
- GHS Hazard Statements: Not Classified; Reported as not meeting GHS hazard criteria by 135 of 138 companies (only 2.2% companies provided GHS information). For more detailed information, please visit ECHA C&L website. Source: European Chemicals Agency (ECHA)
- ECHA C&L Notifications Summary: Aggregated GHS information provided per 138 reports by companies from 3 notifications to the ECHA C&L Inventory.; Reported as not meeting GHS hazard criteria per 135 of 138 reports by companies.; There is 1 notification provided by 3 of 138 reports by companies with hazard statement code(s).; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Source: European Chemicals Agency (ECHA)
- Health Effects: Aluminum targets the nervous system and causes decreased nervous system performance and is associated with altered function of the blood-brain barrier. The accumulation of aluminum in the body may cause bone or brain diseases. High levels of aluminum have been linked to Alzheimer's disease. A small percentage of people are allergic to aluminium and experience contact dermatitis, digestive disorders, vomiting or other symptoms upon contact or ingestion of products containing aluminium. (L739, L740) Source: Toxin and Toxin Target Database (T3DB)
- Toxicity Summary: The main target organs of aluminum are the central nervous system and bone. Aluminum binds with dietary phosphorus and impairs gastrointestinal absorption of phosphorus. The decreased phosphate body burden results in osteomalacia (softening of the bones due to defective bone mineralization) and rickets. Aluminum's neurotoxicity is believed to involve several mechanisms. Changes in cytoskeletal protein functions as a results of altered phosphorylation, proteolysis, transport, and synthesis are believed to be one cause. Aluminum may induce neurobehavioral effects by affecting permeability of the blood-brain barrier, cholinergic activity, signal transduction pathways, lipid peroxidation, and impair neuronal glutamate nitric oxide-cyclic GMP pathway, as well as interfere with metabolism of essential trace elements because of similar coordination chemistries and consequent competitive interactions. It has been suggested that aluminum's interaction with estrogen receptors increases the expression of estrogen-related genes and thereby contributes to the progression of breast cancer (A235), but studies have not been able to establish a clear link between aluminum and increased risk of brea Source: Toxin and Toxin Target Database (T3DB)
- Environmental Fate: AQUATIC FATE: The adsorption of aluminum by fine particulates was studied in Whitray Beck, a hill stream in England. ... Uptake of aluminum by the particles increased with total aluminum, with pH, and with particle concentration, although the fraction of aluminum bound at a given pH and particle concentration decreased with total aluminum ... . /Aluminum/ Source: Hazardous Substances Data Bank (HSDB)
- Environmental Fate: TERRESTRIAL FATE: Air dried, <2 mm fractions of 3 soil samples from The Netherlands and 1 from New Hampshire, were taken from the surface and subsurface horizons of two podzols (Haplorthods) and of a recent driftsand (Udipsamment). Duplicate samples of each emulsion soil horizon were leached ... with aqueous hydrogen chloride (pH 3.0). ... Charge balances of the leachates indicate that dissolved aluminum is present mainly as aquo-aluminum (+3). Only in leachates of podzol Bhs horizons is a significant fraction (20-30%) of dissolved aluminum organically complexed. Dissolved aluminum concn are significantly correlated with the organic (tetrasodium pyrophosphate extractable) aluminum content of the soil sample. Mobility of aluminum in the Hubbard Brook soils is significantly lower than in the Dutch soils, because of higher soil-solution pH values. /Aluminum cmpd/ Source: Hazardous Substances Data Bank (HSDB)
- Environmental Fate: TERRESTRIAL FATE: Albic and spodic soil horizons were sampled from old growth eastern white pine/mixed northern hardwoods. Adirondacks, and an ochric soil horizon was sampled from the Appalachian plateau of NY State. 21 Three horizon forest floor and 21 forest floor/mineral soil (field moist equivalent of 12.0 oven dry albic, spodic, or ochric mineral soil) columns were leached in triplicate with either 10 uM nitric acid (pH 5), 5 uM sulfuric acid (pH 5), 100 uM nitric acid (pH 4), 50 uM sulfuric acid (pH 4), 1000 uM nitric acid (pH 3), 500 uM sulfuric acid (pH 3), or distilled, deionized water (pH 5.7) control treatment). Nitric acid leached more aluminum than did sulfuric acid from forest floor/spodic soil columns. Increasing the nitric acid concn from pH 3-5 increased total aluminum concn in leachates from 0.70 to 0.85 mM, while increasing sulfuric acid had no effect. Addition of pH 3 sulfuric acid to forest floor/spodic columns raised leachate pH relative to pH 3 nitric acid and controls, and resulted in the lowest aluminum concn of all treatments in the first 3 of 4 sequential leachings. /Aluminum/ Source: Hazardous Substances Data Bank (HSDB)
- Environmental Fate: Albic and spodic soil horizons were sampled from old growth eastern white pine/mixed northern hardwoods sites in the Adirondacks, and an ochric soil horizon was sampled from the Appalachian Plateau of NY State. 9 Three horizon forest floor, 9 mineral soil (field moist equivalent of 12.0 oven dry albic, spodic, or ochric mineral soil) and 9 forest floor/mineral soil columns were leached with 60 ml of (a) 10 mM ammonium nitrate (control), (b) 1.0 mM nitric acid in 10 mM ammonium nitrate (pH 3), and (c) 1.0 mM ammonium nitrate (pH 3) at the rate of 10 ml/hr. The above procedure was repeated on each mineral soil without a forest floor, except leaching soln were 0.5 mM calcium nitrate or calcium sulfate, each in 10 mM ammonium nitrate. Adding 2 and 0.5 cmol sub c (H+)/kg to forest floor and minera soils, respectively, simulated snowmelt additions. Total aluminum concn in leachates from forest floor/albic or forest floor/ochric columns were greater than the sum of concn in leachates from the forest floor and mineral horizon when leached separately. This positive synergistic behavior of the forest floor-mineral horizon sequences was also observed in the forest floor-spodic horizon sequenc Source: Hazardous Substances Data Bank (HSDB)
- Consumer Uses: Crystal growth modifiers (nucleating agents) Source: EPA Chemical Data Reporting (CDR)
- Industry Uses: Other; Soil amendments (fertilizers) Source: EPA Chemical Data Reporting (CDR)
- Sources/Uses: Used in dyeing and printing fabrics; manufacturing dyes, lakes, paper, vegetable glue, marble cement, porcelain cement, explosives, aluminum salts, artificial stones, and statuary; tanning; waterproofing; hardening gelatin; purifying water; clarifying sugar; hardening plaster casts; and electrolytic copper plating; Also used as a catalyst in synthesis of ammonia, a mordant in staining (with carmine, eosine, and hematoxylin), a clarifier (as alumina cream), a hardening agent in microscopy, an additive (matches, paints, baking powder, and foods), a water correcting agent used in brewing industry, an astringent, a veterinary antiseptic and antimycotic, and in taxidermy; [HSDB] Used as a coagulating agent for latex and as a styptic pencil; [CHEMINFO] Potassium aluminum sulfate (alum) is used as a hardener in photographic processing; Also used as a mordant in textile dyeing (textile arts); [www.ci.tucson.az.us/arthazards/medium.html] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Industrial Processes with risk of exposure: Electroplating [Category: Plate]; Pulp and Paper Processing [Category: Industry]; Using Disinfectants or Biocides [Category: Clean]; Sewer and Wastewater Treatment [Category: Industry]; Leather Tanning and Processing [Category: Industry]; Photographic Processing [Category: Other]; Textiles (Printing, Dyeing, or Finishing) [Category: Industry] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Activities with risk of exposure: Textile arts [Category: Hobbies]; Preparing and mounting animal skins (taxidermy) [Category: Hobbies] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Uses: IN DYEING, PRINTING FABRICS; MFR DYES, LAKES, PAPER, VEGETABLE GLUE Source: Hazardous Substances Data Bank (HSDB)
- Uses: MFR OF MARBLE CEMENT, PORCELAIN CEMENT, EXPLOSIVES, IN TANNING, HARDENING GELATIN, BAKING POWDERS Source: Hazardous Substances Data Bank (HSDB)
- Uses: IN PURIFYING WATER, CLARIFYING SUGAR, HARDENING PLASTER CASTS; ELECTROLYTIC COPPERPLATING. Source: Hazardous Substances Data Bank (HSDB)
- Uses: AS CATALYST IN SYNTHESIS OF AMMONIA; AS MORDANT IN STAINING WITH CARMINE, EOSINE HEMATOXYLIN. Source: Hazardous Substances Data Bank (HSDB)
- Uses: For more Uses (Complete) data for ALUM, POTASSIUM (11 total), please visit the HSDB record page. Source: Hazardous Substances Data Bank (HSDB)
- Uses: Potassium alum or potash alum is an astringent/styptic and antiseptic and is commonly used in water purification, leather tanning, fireproof textiles, and baking powder. It also has cosmetic uses as a deodorant and as an aftershave treatment. (L776) Source: Toxin and Toxin Target Database (T3DB)
Mapped by: Existing checksum-valid CAS to unique PubChem CID match. Retrieved: 2026-08-31. Open source record
Scientific classifications and hazard annotations provide context and do not replace the market-specific regulatory decision shown above.
Additional source coverage and match status
| Source | Result | Checked |
|---|---|---|
| EMBL-EBI ChEBI | Exact match | 2026-08-31 |
| NIH PubChem PUG-View | Exact match | 2026-08-31 |
A recorded no-match is useful evidence that the source was checked; it is not a claim that the substance does not exist elsewhere.
Retrieved from NIH PubChem on 2026-08-31 by checksum-valid CAS matching. Chemical properties do not replace the regulatory decision on this page.
CAS 7784-24-9PubChem CID 62667
Aluminum potassium sulfate dodecahydrate
Potassium aluminium sulfate dodecahydrate is a hydrate resulting from the the formal combination of anhydrous potassium aluminium sulfate with 12 mol eq. of water. It has a role as a mordant, an astringent and a flame retardant. It is a potassium salt, a hydrate, an aluminium salt and a metal sulfate. It contains an aluminium(3+) and a potassium aluminium sulfate. — ChEBI
- IUPAC name
- aluminum;potassium;disulfate;dodecahydrate
- Molecular formula
- AlH24KO20S2
- Molecular weight
- 474.4 g/mol
- Exact mass
- 473.9754804 Da
- Topological polar surface area
- 189.0 Ų
- Hydrogen-bond donors
- 12
- Hydrogen-bond acceptors
- 20
- Covalent units
- 16
- Defined stereocentres
- 0
Also known as
ALUMINUM POTASSIUM SULFATE DODECAHYDRATE [MI]RefChem:556689616-521-7Aluminium potassium sulfate dodecahydratePotassium alum dodecahydratePotash alum dodecahydrateAluminum potassium disulfate dodecahydrateAlum, potassium, dodecahydrate
16 more reported names
Potassium aluminum sulfate dodecahydrateAlum, potassium [USP]Potassium aluminum disulfate dodecahydrateUNII-1L24V9R23SALUMINUM POTASSIUM SULFATE, DODECAHYDRATESulfuric acid, aluminum potassium salt (2:1:1), dodecahydrateAluminum potassium sulfate (AlK(SO4)2), dodecahydratePotassium aluminum sulfate dodecahydrate (KAl(SO4)2.12H2O)potassium aluminium sulfate dodecahydrateAlum, potassium (USP)BAIFANALUM,POTASSIUMALUMEN [CHP]ALUM [WHO-DD]AlH24KO20S2POTASSIUM ALUM [II]
External database identifiers
- ChEBI:CHEBI:86465
- EPA DTXSID:DTXSID401018678
Retrieved from NIH PubChem on 2026-08-31 by checksum-valid CAS matching. Chemical properties do not replace the regulatory decision on this page.
Inventory details for POTASSIUM ALUM
INCI name
POTASSIUM ALUM
Description
Aluminum potassium bis(sulfate)
Record provenance
- Inventory reference
- 79432
- Imported identity
- POTASSIUM ALUM
- Source update
- 30/01/2014
Annex records for POTASSIUM ALUM
Key data
CAS
10043-67-1 / 7784-24-9
EC
233-141-3 / -
Restriction
—
Function
- ASTRINGENT
- Contracting and/or tightening the skin.
Official EU ingredient-name evidence
The ingredient name exactly matches the official 2025 EU glossary of common ingredient names.
Related inventory evidence
Ingredients with overlapping formulation functions
Additional official and scientific sources
11 external databases to check this identity in
Each link searches that source for this identity. What each source is, and its legal weight
ECHA CHEM / Information on chemicalsPubChem PUG RESTEU Safety Gate cosmetic product alertsECHA CHEMUS EPA CompToxCosmetic Ingredient Review safety assessmentsFDA Global Substance Registration SystemILO/WHO International Chemical Safety CardsJapan NITE-CHRIPNIOSH Pocket Guide to Chemical HazardsOECD eChemPortal
How POTASSIUM ALUM appears in the CosIng inventory
The CosIng inventory lists POTASSIUM ALUM as a cosmetic ingredient and this page links it to 0 annex records. The inventory entry captures names and identifiers, while the annex records show where the substance is prohibited, restricted or positively listed in EU cosmetics law.
POTASSIUM ALUM is also tagged with 1 cosmetic function in the official data. Function labels describe intended use, but they do not replace regulatory review of linked annex records before formulation or labelling work.
Frequently asked questions
POTASSIUM ALUM is listed in the EU CosIng ingredient inventory with no direct annex restriction records linked at this time. Absence of an annex link does not guarantee unrestricted use — always verify against the current official CosIng database before formulating.
According to the EU CosIng inventory, POTASSIUM ALUM carries the following function designation(s):
CAS 10043-67-1 / 7784-24-9 may appear across multiple EU annex records. Viewing the CAS lookup page shows all Annex II–VI entries sharing this identifier, which is useful for identifying cross-annex regulatory status of the same chemical substance.
Use the INCI Checker to screen a full ingredient list across selected markets, or compare this substance across all supported market datasets.
Source note for POTASSIUM ALUM
This page reproduces the CosIng inventory entry for POTASSIUM ALUM from public European Commission cosmetic ingredient materials and shows linked identifiers even when no direct annex match is currently attached.
Use this inventory page to research POTASSIUM ALUM and compare linked records, but verify restrictions and legal status against the current official source text and law before making regulatory decisions.
Tools & next steps
Check your formula
Scan a full INCI list to detect POTASSIUM ALUM and any linked EU annex restrictions or allergen flags.
INCI CheckerSearch similar ingredients
Find other inventory ingredients and annex entries related to POTASSIUM ALUM, its identifiers or nearby name variants.
Search