Skip to main content
CosIng Checker
CosIng Checker
EU cosmetic ingredients, restrictions and safety
Login
Annex II Entry 1204 CMR05/01/2011

m-Phenylenediamine and its salts

m-Phenylenediamine and its salts is listed in Annex II as a prohibited substance for cosmetic products placed on the EU market.

Search similar Back to annex Compare
Prohibited substance— Annex II, EU Regulation 1223/2009
Entry: 1204
CMR

Chemical identity and properties

PubChem 2D chemical structure for CAS 108-45-2
CAS 108-45-2PubChem CID 7935

M-Phenylenediamine

1,3-phenylenediamine is a phenylenediamine taht is benzene substituted at positions 1 and 3 with amino functions. — ChEBI

IUPAC name
benzene-1,3-diamine
Molecular formula
C6H8N2
Molecular weight
108.14 g/mol
Exact mass
108.068748264 Da
XLogP3
-0.3
Topological polar surface area
52.0 Ų
Hydrogen-bond donors
2
Hydrogen-bond acceptors
2
Covalent units
1
Defined stereocentres
0

Also known as

1,3-Phenylenediamine1,3-BENZENEDIAMINE1,3-Diaminobenzene3-Aminoanilinem-Diaminobenzenem-Aminoanilinemeta-PhenylenediamineDeveloper C
16 more reported names
Developer 113-PhenylenediamineMetaphenylenediaminem-BenzenediamineDeveloper HDeveloper MDirect Brown BRDirect Brown GGm-FenylendiaminC.I. Developer 11meta-Aminoanilinemeta-Benzenediaminemeta-DiaminobenzeneCI Developer 11Benzene, 1,3-diamino-APCO 2330
Open full PubChem recordPubChem annotations3D structure image
External database identifiers

Evidence from additional scientific databases

NIH PubChem PUG-View
Exact identifier match7935

Attributed physical-property, hazard, environmental and use annotations.

  • First Aid: EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.; SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.; INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) shou Source: CAMEO Chemicals
  • Signal: Danger Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • GHS Hazard Statements: H301: Toxic if swallowed [Danger Acute toxicity, oral]; H311: Toxic in contact with skin [Danger Acute toxicity, dermal]; H317: May cause an allergic skin reaction [Warning Sensitization, Skin]; H319: Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H331: Toxic if inhaled [Danger Acute toxicity, inhalation]; H341: Suspected of causing genetic defects [Warning Germ cell mutagenicity]; H400: Very toxic to aquatic life [Warning Hazardous to the aquatic environment, acute hazard]; H410: Very toxic to aquatic life with long lasting effects [Warning Hazardous to the aquatic environment, long-term hazard] Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Precautionary Statement Codes: P203, P261, P262, P264, P264+P265, P270, P271, P272, P273, P280, P301+P316, P302+P352, P304+P340, P305+P351+P338, P316, P318, P321, P330, P333+P317, P337+P317, P361+P364, P362+P364, P391, P403+P233, P405, and P501 (click each P-code to see the statement) Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Signal: Danger Source: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H301+H311+H331 (23.9%): Toxic if swallowed, in contact with skin or if inhaled [Danger Acute toxicity, oral; acute toxicity, dermal; acute toxicity, inhalation]; H301 (100%): Toxic if swallowed [Danger Acute toxicity, oral]; H311 (100%): Toxic in contact with skin [Danger Acute toxicity, dermal]; H317 (100%): May cause an allergic skin reaction [Warning Sensitization, Skin]; H319 (100%): Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H331 (100%): Toxic if inhaled [Danger Acute toxicity, inhalation]; H341 (99.7%): Suspected of causing genetic defects [Warning Germ cell mutagenicity]; H400 (96.2%): Very toxic to aquatic life [Warning Hazardous to the aquatic environment, acute hazard]; H410 (100%): Very toxic to aquatic life with long lasting effects [Warning Hazardous to the aquatic environment, long-term hazard] Source: European Chemicals Agency (ECHA)
  • Precautionary Statement Codes: P203, P261, P262, P264, P264+P265, P270, P271, P272, P273, P280, P301+P316, P302+P352, P304+P340, P305+P351+P338, P316, P318, P321, P330, P333+P317, P337+P317, P361+P364, P362+P364, P391, P403+P233, P405, and P501 (click each P-code to see the statement) Source: European Chemicals Agency (ECHA)
  • ECHA C&L Notifications Summary: Aggregated GHS information provided per 343 reports by companies from 16 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Source: European Chemicals Agency (ECHA)
  • Signal: Danger Source: NITE-CMC
  • GHS Hazard Statements: H301: Toxic if swallowed [Danger Acute toxicity, oral]; H312: Harmful in contact with skin [Warning Acute toxicity, dermal]; H317: May cause an allergic skin reaction [Warning Sensitization, Skin]; H320: Causes eye irritation [Warning Serious eye damage/eye irritation]; H370: Causes damage to organs [Danger Specific target organ toxicity, single exposure]; H372: Causes damage to organs through prolonged or repeated exposure [Danger Specific target organ toxicity, repeated exposure]; H373: May causes damage to organs through prolonged or repeated exposure [Warning Specific target organ toxicity, repeated exposure]; H401: Toxic to aquatic life [Hazardous to the aquatic environment, acute hazard]; H410: Very toxic to aquatic life with long lasting effects [Warning Hazardous to the aquatic environment, long-term hazard] Source: NITE-CMC
  • Precautionary Statement Codes: P260, P261, P264, P264+P265, P270, P272, P273, P280, P301+P316, P302+P352, P305+P351+P338, P308+P316, P317, P319, P321, P330, P333+P317, P337+P317, P362+P364, P391, P405, and P501 (click each P-code to see the statement) Source: NITE-CMC
  • GHS Hazard Statements: H301: Toxic if swallowed [Danger Acute toxicity, oral]; H312: Harmful in contact with skin [Warning Acute toxicity, dermal]; H317: May cause an allergic skin reaction [Warning Sensitization, Skin]; H319: Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H341: Suspected of causing genetic defects [Warning Germ cell mutagenicity]; H361: Suspected of damaging fertility or the unborn child [Warning Reproductive toxicity]; H370: Causes damage to organs [Danger Specific target organ toxicity, single exposure]; H372: Causes damage to organs through prolonged or repeated exposure [Danger Specific target organ toxicity, repeated exposure]; H373: May causes damage to organs through prolonged or repeated exposure [Warning Specific target organ toxicity, repeated exposure] Source: NITE-CMC
  • Precautionary Statement Codes: P203, P260, P261, P264, P264+P265, P270, P272, P280, P301+P316, P302+P352, P305+P351+P338, P308+P316, P317, P318, P319, P321, P330, P333+P317, P337+P317, P362+P364, P405, and P501 (click each P-code to see the statement) Source: NITE-CMC
  • Cosmetic Ingredient Review Conclusion: On the basis of the animal and clinical data included in this report, the CIR Expert Panel concludes that m-Phenylenediamine and m-Phenylenediamine Sulfate are safe for use in hair dyes at concentrations of up to 10%. Source: Cosmetic Ingredient Review (CIR)
  • Cosmetic Ingredient Review Finding(s): Safe for use in cosmetics, with qualifications Source: Cosmetic Ingredient Review (CIR)
  • Environmental Bioconcentration: An estimated BCF value of 0.33 was calculated for 1,3-benzenediamine(SRC), using an estimated log Kow of -0.33(1) and a recommended regression-derived equation(2). BCF values of 1.3 to 4.6 and <1.6 to 24 were measured for 1,3-benzenediamine in carp at 2 and 0.2 mg/l, respectively(3). According to a classification scheme(4), these BCF values suggest that bioconcentration in aquatic organisms is low(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: TERRESTRIAL FATE: Based on a recommended classification scheme(1), an estimated Koc value of 16(SRC), determined from a measured log Kow of -0.33(2) and a recommended regression-derived equation(3), indicates that 1,3-benzenediamine is expected to have very high mobility in soil(SRC). However, anilines are expected to bind strongly to humus or organic matter in soils due to the high reactivity of the aromatic amino group(4,5); therefore, mobility may be much lower in some soils(SRC). Volatilization of 1,3-benzenediamine is not expected to be important from moist soil surfaces(SRC) given an estimated Henry's Law constant of 1.3X10-9 atm-cu m/mole(SRC), from its extrapolated vapor pressure, 2.1X10-3 mm Hg(6), and measured water solubility, 2.4X10+5 mg/l(7). 1,3-Benzenediamine is not expected to volatilize from dry soil surfaces based on its extrapolated vapor pressure(6). Limited biodegradation data indicate 1,3-benzenediamine may be resistant to biodegradation in soil; soil microflora did not cleave the benzene ring of 1,3-benzenediamine in 64 days(8). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: AQUATIC FATE: Based on a recommended classification scheme(1), an estimated Koc value of 16(SRC), determined from a measured log Kow of -0.33(2) and a recommended regression-derived equation(3), indicates that 1,3-benzenediamine is not expected to adsorb to suspended solids and sediment in water(SRC). However, aromatic amines are recognized as having a strong affinity to organic carbon, suggesting that this compound may bind strongly to suspended organic material in water(4,5). 1,3-Benzenediamine is not expected to volatilize from water surfaces(3,SRC) based on an estimated Henry's Law constant of 1.3X10-9 atm-cu m/mole(SRC), derived from its extrapolated vapor pressure, 2.1X10-3 mm Hg(6), and measured water solubility, 2.4X10+5 mg/l(7). 1,3-Benzenediamine may exist partially in the ionized form at environmental pH's based on pKa values of 2.65 and 4.88 at 25 °C(8). Volatilization of the ionized form is not expected to be an important fate process(SRC). According to a classification scheme(9), BCF values of 1.3 to 4.6 and <1.6 to 24 measured for 1,3-benzenediamine in carp at 2 and 0.2 mg/l, respectively(10), suggest that bioconcentration in aquatic organisms is low(SRC). 1,3-Benzen Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), 1,3-benzenediamine, which has an extrapolated vapor pressure of 2.1X10-3 mm Hg at 25 °C(2), is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase 1,3-benzenediamine is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be about 1.9 hours(3,SRC). 1,3-Benzenediamine absorbs light in the environmental spectrum(4), which suggests a potential for direct photolysis in the environment(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Industry Uses: Adhesion/cohesion promoter; Intermediate; Surface modifier; Dye; Flame retardant; Not Known or Reasonably Ascertainable; Other Source: EPA Chemical Data Reporting (CDR)
  • Cosmetic Ingredient Review Link: CIR ingredient: m-Phenylenediamine Source: Cosmetic Ingredient Review (CIR)
  • Sources/Uses: Used to make diisocyanates for the production of polyurethane foams and other resins and polymers; Also used as a corrosion inhibitor, curing agent, photographic developer, and intermediate for other chemical products; [CHEMINFO] Used to make dyes, to develop dyes, to dye hair, and to cure epoxy resins; [ACGIH] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Industrial Processes with risk of exposure: Plastic Composites Manufacturing [Category: Industry]; Photographic Processing [Category: Other]; Dressing Hair [Category: Other] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Uses: MFR DYES; RUBBER CURING AGENTS; ION EXCHANGE RESINS, DECOLORIZING RESINS, FORMALDEHYDE CONDENSATES; RESINOUS POLYAMIDES, BLOCK POLYMERS, TEXTILE FIBERS, URETHANES, PETROLEUM ADDITIVES, RUBBER CHEMICALS; IN CORROSION INHIBITORS; IN PHOTOGRAPHY; AS REAGENT FOR GOLD & BROMINE Source: Hazardous Substances Data Bank (HSDB)
  • Uses: Dyestuff manufacture, detection of nitrite, textile developing agent, laboratory reagent, vulcanizing agent. Source: Hazardous Substances Data Bank (HSDB)
  • Uses: IT IS ... EMPLOYED AS CURING AGENT TO HARDEN EPOXY RESINS USED IN CASTING & PLASTIC TOOLING, LAMINATING APPLICATIONS & IN ADHESIVES. IT IS ADDED TO ISOPHTHALOYL CHLORIDE TO PRODUCE POLY-META-PHENYLENE ISOPHTHALAMIDE RESIN, A POLYAMIDE FIBER (NOMEX) USED IN HIGH-TEMP APPLICATIONS, EG PROTECTIVE CLOTHING ... Source: Hazardous Substances Data Bank (HSDB)
  • Uses: ... CAN BE USED FOR PRODN OF OVER 140 DYES, 37 OF WHICH ARE BELIEVED TO HAVE COMMERCIAL ... SIGNIFICANCE. ... THESE DYES ARE USED TO COLOR VARIOUS TEXTILE FIBERS & OTHER MATERIALS, EG, LEATHER, PAPER, POLISHES, SPIRIT INKS ... ALSO USED AS DIRECT DYE DEVELOPER TO OBTAIN BLACK, BLUE & BROWN SHADES ... AND IT IS INCL IN HAIR-DYE FORMULATIONS TO PRODUCE BROWN, GOLDEN-BLOND, BLUE & GRAY SHADES ON THE HAIR. Source: Hazardous Substances Data Bank (HSDB)
  • Uses: For more Uses (Complete) data for 1,3-BENZENEDIAMINE (11 total), please visit the HSDB record page. Source: Hazardous Substances Data Bank (HSDB)

Mapped by: Existing checksum-valid CAS to unique PubChem CID match. Retrieved: 2026-08-31. Open source record

Scientific classifications and hazard annotations provide context and do not replace the market-specific regulatory decision shown above.

Additional source coverage and match status
SourceResultChecked
NIH PubChem PUG-ViewExact match2026-08-31

A recorded no-match is useful evidence that the source was checked; it is not a claim that the substance does not exist elsewhere.

Retrieved from NIH PubChem on 2026-08-31 by checksum-valid CAS matching. Chemical properties do not replace the regulatory decision on this page.

Record details

Chemical name

m-Phenylenediamine and its salts

Regulatory information

Regulation

(EC) 2009/1223

See every entry this act set

Other directives

(EC) 2008/1272

SCCS opinions

Identified ingredients

CMR

CategoryCarcinogenicMutagenicReprotoxic
Cat. 2—✓—

Key data

CAS
108-45-2
EC
203-584-7
Annex
II
Entry number
1204

Inventory links for m-Phenylenediamine and its salts

Direct matches are limited for this record, so nearby entries from Annex II are shown as well.

Annex II 1199
Nearby record in the same annex

Oxadiargyl (ISO)

CAS: 39807-15-3
EC: 254-637-6

What Annex II means for m-Phenylenediamine and its salts

m-Phenylenediamine and its salts is listed as a prohibited substance under Annex II of EU Cosmetics Regulation 1223/2009 and must not be intentionally added. Article 17 separately addresses unintended small quantities that are technically unavoidable under good manufacturing practice and compatible with the Article 3 safety requirement.

Formulators must screen their ingredients and raw materials to ensure none contain this substance. Suppliers should provide documentation confirming absence when requested.

This record is linked to 2 CosIng inventory ingredients for name and identifier cross-reference. The page also surfaces 12 related annex records with overlapping identifiers, annex logic or naming patterns.

Compliance checklist

  • Verify this substance is absent from all raw materials and finished formulations.
  • Request absence confirmation or CoA from raw material suppliers.
  • Document the screening result in the Product Information File (PIF).
  • This substance has CMR classification. Review the CMR table above and verify current Annex II/III status before use.

Frequently asked questions

Yes. m-Phenylenediamine and its salts is listed in Annex II of EU Cosmetics Regulation 1223/2009 and is prohibited as an intentionally added cosmetic ingredient. Article 17 provides a narrow exception for unintended small quantities that are technically unavoidable under good manufacturing practice, provided the product remains safe under Article 3.

CAS 108-45-2 is the unique numerical identifier assigned to m-Phenylenediamine and its salts by the Chemical Abstracts Service. In cosmetic compliance work, the CAS number is used to cross-reference the substance across regulatory databases, raw material specifications and safety assessment reports. Multiple EU annex entries may share the same CAS number if the same substance appears under different conditions or in different annexes.

m-Phenylenediamine and its salts has a CMR (carcinogenic, mutagenic or reprotoxic) classification under EU CLP Regulation. Under Article 15 of EU Cosmetics Regulation 1223/2009, CMR substances of category 1A or 1B are prohibited in cosmetics unless specifically permitted. Category 2 CMR substances may be used only if assessed safe by the SCCS. Always verify current annex status and any applicable derogations before use.

Use the INCI Checker tool on this site to paste your full ingredient list (INCI) and scan it against all Annex II–VI entries. The tool highlights any ingredients that match restricted, prohibited or allergen-flagged records. This is useful for rapid compliance screening of finished product formulas or raw material declarations.
Open INCI Checker

Source note for Annex II record m-Phenylenediamine and its salts

This page summarizes one Annex II record for m-Phenylenediamine and its salts from public European Commission cosmetic materials and adds linked inventory or identifier matches when available.

Use this record page to review Annex II conditions for m-Phenylenediamine and its salts, but confirm any final regulatory decision against the current official annex wording and source files.

View sourcesView updates

Tools & next steps

Check your formula

Paste a full INCI list to detect m-Phenylenediamine and its salts and other flagged EU annex records in one pass.

INCI Checker

Compare entries

Compare m-Phenylenediamine and its salts side by side with another annex record to review differences in restrictions, concentrations and annex placement.

Compare

Browse the annex

See all records in Annex II and compare regulatory conditions across substances in this annex.

Open Annex II