Skip to main content
InventoryRef 3942902/03/2011

CYCLOHEXANOL

Cyclohexanol; Hexalin

CYCLOHEXANOL is listed in the EU CosIng inventory, but no direct annex records are linked on this page yet.

Regulatory evidence by market

No rule for this ingredient has been imported for any of the 13 markets tracked here.

That describes this inventory, not the law. No imported rule is not evidence that an ingredient is permitted: a rule may exist under another name or identifier, or in a dataset not yet imported here.

Chemical identity and properties

PubChem 2D chemical structure for CAS 108-93-0
CAS 108-93-0PubChem CID 7966

Cyclohexanol

Cyclohexanol is an alcohol that consists of cyclohexane bearing a single hydroxy substituent. The parent of the class of cyclohexanols. It has a role as a solvent. It is a member of cyclohexanols and a secondary alcohol. ChEBI

IUPAC name
cyclohexanol
Molecular formula
C6H12O
Molecular weight
100.16 g/mol
Exact mass
100.088815002 Da
XLogP3
1.2
Topological polar surface area
20.2 Ų
Hydrogen-bond donors
1
Hydrogen-bond acceptors
1
Covalent units
1
Defined stereocentres
0

Also known as

Cyclohexyl alcohol1-CyclohexanolHexahydrophenolHydrophenolHydroxycyclohexaneHexalinAdronalHydralin
16 more reported names
NaxolAdronolAnolCicloesanoloCykloheksanolPhenol, hexahydro-Cyclohexan-1-ol8E7S519M3PNSC-403656CHEBI:18099RefChem:5718203-630-6Cicloesanolo [Italian]Cykloheksanol [Polish]NSC 403656Cyclohexanol-d11
External database identifiers

Evidence from additional scientific databases

NIH PubChem PUG-View
Exact identifier match7966

Attributed physical-property, hazard, environmental and use annotations.

  • First Aid: EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.; SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.; INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) shou Source: CAMEO Chemicals
  • First Aid: (General first aid procedures); Eye: Irrigate immediately - If this chemical contacts the eyes, immediately wash (irrigate) the eyes with large amounts of water, occasionally lifting the lower and upper lids. Get medical attention immediately.; Skin: Water wash promptly - If this chemical contacts the skin, promptly wash the contaminated skin with water. If this chemical penetrates the clothing, promptly remove the clothing and wash the skin with water. If irritation persists after washing, get medical attention.; Breathing: Respiratory support; Swallow: Medical attention immediately - If this chemical has been swallowed, get medical attention immediately. Source: The National Institute for Occupational Safety and Health (NIOSH)
  • Signal: Warning Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • GHS Hazard Statements: H302: Harmful if swallowed [Warning Acute toxicity, oral]; H315: Causes skin irritation [Warning Skin corrosion/irritation]; H332: Harmful if inhaled [Warning Acute toxicity, inhalation]; H335: May cause respiratory irritation [Warning Specific target organ toxicity, single exposure; Respiratory tract irritation] Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Precautionary Statement Codes: P261, P264, P270, P271, P280, P301+P317, P302+P352, P304+P340, P317, P319, P321, P330, P332+P317, P362+P364, P403+P233, P405, and P501 (click each P-code to see the statement) Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Note: This chemical does not meet GHS hazard criteria for 0.2% (2 of 1012) of reports. Source: European Chemicals Agency (ECHA)
  • Signal: Warning Source: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H302 (99.8%): Harmful if swallowed [Warning Acute toxicity, oral]; H312 (18.8%): Harmful in contact with skin [Warning Acute toxicity, dermal]; H315 (99.8%): Causes skin irritation [Warning Skin corrosion/irritation]; H319 (25.1%): Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H332 (99.8%): Harmful if inhaled [Warning Acute toxicity, inhalation]; H335 (99.8%): May cause respiratory irritation [Warning Specific target organ toxicity, single exposure; Respiratory tract irritation]; H412 (18.9%): Harmful to aquatic life with long lasting effects [Hazardous to the aquatic environment, long-term hazard] Source: European Chemicals Agency (ECHA)
  • Precautionary Statement Codes: P261, P264, P264+P265, P270, P271, P273, P280, P301+P317, P302+P352, P304+P340, P305+P351+P338, P317, P319, P321, P330, P332+P317, P337+P317, P362+P364, P403+P233, P405, and P501 (click each P-code to see the statement) Source: European Chemicals Agency (ECHA)
  • ECHA C&L Notifications Summary: Aggregated GHS information provided per 1012 reports by companies from 27 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Reported as not meeting GHS hazard criteria per 2 of 1012 reports by companies.; There are 26 notifications provided by 1010 of 1012 reports by companies with hazard statement code(s).; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Source: European Chemicals Agency (ECHA)
  • Signal: Danger Source: NITE-CMC
  • GHS Hazard Statements: H315: Causes skin irritation [Warning Skin corrosion/irritation]; H318: Causes serious eye damage [Danger Serious eye damage/eye irritation]; H335: May cause respiratory irritation [Warning Specific target organ toxicity, single exposure; Respiratory tract irritation]; H336: May cause drowsiness or dizziness [Warning Specific target organ toxicity, single exposure; Narcotic effects]; H361: Suspected of damaging fertility or the unborn child [Warning Reproductive toxicity]; H372: Causes damage to organs through prolonged or repeated exposure [Danger Specific target organ toxicity, repeated exposure]; H373: May causes damage to organs through prolonged or repeated exposure [Warning Specific target organ toxicity, repeated exposure]; H402: Harmful to aquatic life [Hazardous to the aquatic environment, acute hazard]; H412: Harmful to aquatic life with long lasting effects [Hazardous to the aquatic environment, long-term hazard] Source: NITE-CMC
  • Precautionary Statement Codes: P203, P260, P261, P264, P264+P265, P270, P271, P273, P280, P302+P352, P304+P340, P305+P354+P338, P317, P318, P319, P321, P332+P317, P362+P364, P403+P233, P405, and P501 (click each P-code to see the statement) Source: NITE-CMC
  • GHS Hazard Statements: H303: May be harmful if swallowed [Warning Acute toxicity, oral]; H316: Causes mild skin irritation [Warning Skin corrosion/irritation]; H318: Causes serious eye damage [Danger Serious eye damage/eye irritation]; H335: May cause respiratory irritation [Warning Specific target organ toxicity, single exposure; Respiratory tract irritation]; H336: May cause drowsiness or dizziness [Warning Specific target organ toxicity, single exposure; Narcotic effects]; H361: Suspected of damaging fertility or the unborn child [Warning Reproductive toxicity]; H372: Causes damage to organs through prolonged or repeated exposure [Danger Specific target organ toxicity, repeated exposure]; H373: May causes damage to organs through prolonged or repeated exposure [Warning Specific target organ toxicity, repeated exposure] Source: NITE-CMC
  • NFPA Health Rating: 1 - Materials that, under emergency conditions, can cause significant irritation. Source: Hazardous Substances Data Bank (HSDB)
  • NFPA Fire Rating: 2 - Materials that must be moderately heated or exposed to relatively high ambient temperatures before ignition can occur. Materials would not under normal conditions form hazardous atmospheres with air, but under high ambient temperatures or under moderate heating could release vapor in sufficient quantities to produce hazardous atmospheres with air. Source: Hazardous Substances Data Bank (HSDB)
  • NFPA Instability Rating: 0 - Materials that in themselves are normally stable, even under fire conditions. Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Bioconcentration: An estimated BCF of 3.0 was calculated for cyclohexanol(SRC), using a log Kow of 1.23(1) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests the potential for bioconcentration in aquatic organisms is low(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 11(SRC), determined from a log Kow of 1.23(2) and a regression-derived equation(3), indicates that cyclohexanol is expected to have very high mobility in soil(SRC). Volatilization of cyclohexanol from moist soil surfaces is expected to be an important fate process(SRC) given a Henry's Law constant of 4.40X10-6 atm-cu m/mole(4). Cyclohexanol is not expected to volatilize from dry soil surfaces(SRC) based upon a vapor pressure of 0.657 mm Hg at 25 °C(5). In the Japanese MITI test, a 96% of theoretical BOD using activated sludge was reached in 4 weeks(6). Various other aerobic screening studies reported 5-day degradations ranging from 57% to 96% based on theoretical BOD in acclimated sewage inoculums or mixed microbial cultures(7-9). These data suggest that biodegradation is an important environmental fate process in soil(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 11(SRC), determined from a log Kow of 1.23(2) and a regression-derived equation(3), indicates that cyclohexanol is not expected to adsorb to suspended solids and sediment(SRC). Volatilization from water surfaces is expected(4) based upon a Henry's Law constant of 4.40X10-6 atm-cu m/mole(5). Using this Henry's Law constant and an estimation method(4), volatilization half-lives for a model river and model lake are 8.4 days and 64 days, respectively(SRC). According to a classification scheme(6), an estimated BCF of 3.0(SRC), from its log Kow(2) and a regression-derived equation(3), suggests the potential for bioconcentration in aquatic organisms is low(SRC). In the Japanese MITI test, a 96% of theoretical BOD using activated sludge was reached in 4 weeks(7). Various other aerobic screening studies reported 5-day degradations ranging from 57% to 96% based on theoretical BOD in acclimated sewage inoculums or mixed microbial cultures(8-10). These data suggest that biodegradation is an important environmental fate process in water(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), cyclohexanol, which has a vapor pressure of 0.657 mm Hg at 25 °C(2), will exist solely in the vapor phase in the ambient atmosphere. Vapor-phase cyclohexanol is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 22 hrs(SRC), calculated from its rate constant of 1.7X10-11 cu cm/molecule-sec at 25 °C(3). Cyclohexanol does not contain chromophores that absorb at wavelengths >290 nm(4) and therefore is not expected to be susceptible to direct photolysis by sunlight(SRC). Source: Hazardous Substances Data Bank (HSDB)

Mapped by: Existing checksum-valid CAS to unique PubChem CID match. Retrieved: 2026-08-31. Open source record

Scientific classifications and hazard annotations provide context and do not replace the market-specific regulatory decision shown above.

Additional source coverage and match status
SourceResultChecked
NIH PubChem PUG-ViewExact match2026-08-31

A recorded no-match is useful evidence that the source was checked; it is not a claim that the substance does not exist elsewhere.

Retrieved from NIH PubChem on 2026-08-31 by checksum-valid CAS matching. Chemical properties do not replace the regulatory decision on this page.

Inventory details for CYCLOHEXANOL

INCI name

CYCLOHEXANOL

Description

Cyclohexanol; Hexalin

Record provenance

Inventory reference
39429
Imported identity
CYCLOHEXANOL
Source update
02/03/2011
European Commission CosIng source notes

Key data

Restriction
Function
PERFUMING
Used for perfume and aromatic raw materials.

Ingredients with overlapping formulation functions

Additional official and scientific sources

11 external databases to check this identity in

How CYCLOHEXANOL appears in the CosIng inventory

The CosIng inventory lists CYCLOHEXANOL as a cosmetic ingredient and this page links it to 0 annex records. The inventory entry captures names and identifiers, while the annex records show where the substance is prohibited, restricted or positively listed in EU cosmetics law.

CYCLOHEXANOL is also tagged with 1 cosmetic function in the official data. Function labels describe intended use, but they do not replace regulatory review of linked annex records before formulation or labelling work.

Frequently asked questions

CYCLOHEXANOL is listed in the EU CosIng ingredient inventory with no direct annex restriction records linked at this time. Absence of an annex link does not guarantee unrestricted use — always verify against the current official CosIng database before formulating.

According to the EU CosIng inventory, CYCLOHEXANOL carries the following function designation(s):

CAS 108-93-0 may appear across multiple EU annex records. Viewing the CAS lookup page shows all Annex II–VI entries sharing this identifier, which is useful for identifying cross-annex regulatory status of the same chemical substance.

Use the INCI Checker to screen a full ingredient list across selected markets, or compare this substance across all supported market datasets.

Source note for CYCLOHEXANOL

This page reproduces the CosIng inventory entry for CYCLOHEXANOL from public European Commission cosmetic ingredient materials and shows linked identifiers even when no direct annex match is currently attached.

Use this inventory page to research CYCLOHEXANOL and compare linked records, but verify restrictions and legal status against the current official source text and law before making regulatory decisions.

Tools & next steps

Check your formula

Scan a full INCI list to detect CYCLOHEXANOL and any linked EU annex restrictions or allergen flags.

INCI Checker

Search similar ingredients

Find other inventory ingredients and annex entries related to CYCLOHEXANOL, its identifiers or nearby name variants.

Search