ETHYL TOSYLAMIDE
N-Ethyltoluene-2-sulphonamide
ETHYL TOSYLAMIDE is listed in the EU CosIng inventory, but no direct annex records are linked on this page yet.
Regulatory evidence by market
No rule for this ingredient has been imported for any of the 13 markets tracked here.
That describes this inventory, not the law. No imported rule is not evidence that an ingredient is permitted: a rule may exist under another name or identifier, or in a dataset not yet imported here.
Chemical identity and properties
N-Ethyl-o-toluenesulfonamide
Toluene ethylsulfonamide is a viscous slightly yellow liquid. (NTP, 1992) — CAMEO Chemicals
- IUPAC name
- N-ethyl-2-methylbenzenesulfonamide
- Molecular formula
- C9H13NO2S
- Molecular weight
- 199.27 g/mol
- Exact mass
- 199.06669983 Da
- XLogP3
- 1.6
- Topological polar surface area
- 54.6 Ų
- Hydrogen-bond donors
- 1
- Hydrogen-bond acceptors
- 3
- Covalent units
- 1
- Defined stereocentres
- 0
Also known as
16 more reported names
External database identifiers
- EPA DTXSID:DTXSID5052416
Evidence from additional scientific databases
NIH PubChem PUG-View
Attributed physical-property, hazard, environmental and use annotations.
- Density: 1.203 at 63.9 °F (NTP, 1992) - Denser than water; will sink Source: CAMEO Chemicals
- Flash Point: greater than 200 °F (NTP, 1992) Source: CAMEO Chemicals
- Physical Description: Toluene ethylsulfonamide is a viscous slightly yellow liquid. (NTP, 1992) Source: CAMEO Chemicals
- Physical Description: CBI; Liquid Source: EPA Chemical Data Reporting (CDR)
- Solubility: less than 0.1 mg/mL at 64 °F (NTP, 1992) Source: CAMEO Chemicals
- Vapor Pressure: 4.15 mmHg at 77 °F (NTP, 1992) Source: CAMEO Chemicals
- First Aid: EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.; SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.; INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) shou Source: CAMEO Chemicals
- Note: This chemical does not meet GHS hazard criteria for 47.4% (55 of 116) of reports. Source: European Chemicals Agency (ECHA)
- Signal: Warning Source: European Chemicals Agency (ECHA)
- GHS Hazard Statements: H336 (15.5%): May cause drowsiness or dizziness [Warning Specific target organ toxicity, single exposure; Narcotic effects]; H412 (36.2%): Harmful to aquatic life with long lasting effects [Hazardous to the aquatic environment, long-term hazard] Source: European Chemicals Agency (ECHA)
- Precautionary Statement Codes: P261, P271, P273, P304+P340, P319, P403+P233, P405, and P501 (click each P-code to see the statement) Source: European Chemicals Agency (ECHA)
- ECHA C&L Notifications Summary: Aggregated GHS information provided per 116 reports by companies from 4 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Reported as not meeting GHS hazard criteria per 55 of 116 reports by companies.; There are 3 notifications provided by 61 of 116 reports by companies with hazard statement code(s).; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Source: European Chemicals Agency (ECHA)
- Note: This chemical does not meet GHS hazard criteria for 57.1% (32 of 56) of all reports. Source: European Chemicals Agency (ECHA)
- Signal: Danger Source: European Chemicals Agency (ECHA)
- GHS Hazard Statements: H311 (32.1%): Toxic in contact with skin [Danger Acute toxicity, dermal] Source: European Chemicals Agency (ECHA)
- Precautionary Statement Codes: P262, P264, P270, P280, P302+P352, P316, P321, P361+P364, P405, and P501 (click each P-code to see the statement) Source: European Chemicals Agency (ECHA)
- ECHA C&L Notifications Summary: Aggregated GHS information provided per 56 reports by companies from 5 notifications to the ECHA C&L Inventory.; Reported as not meeting GHS hazard criteria per 32 of 56 reports by companies.; There are 4 notifications provided by 24 of 56 reports by companies with hazard statement code(s).; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Source: European Chemicals Agency (ECHA)
- Consumer Uses: Plasticizer; Pigment Source: EPA Chemical Data Reporting (CDR)
- Industry Uses: Pigment; Plasticizer Source: EPA Chemical Data Reporting (CDR)
- Sources/Uses: Used as a plasticizer for polyamides, cellulose acetate, and gasoline-resistant coatings; [HSDB] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Uses: PLASTICIZER FOR POLYAMIDES (AS MIXT WITH P-ISOMER) Source: Hazardous Substances Data Bank (HSDB)
- Uses: PLASTICIZER FOR CELLULOSE ACETATE (AS MIXT WITH P-ISOMER) Source: Hazardous Substances Data Bank (HSDB)
- Uses: PLASTICIZER FOR GASOLINE-RESISTANT COATINGS (AS MIXT) Source: Hazardous Substances Data Bank (HSDB)
Mapped by: Existing checksum-valid CAS to unique PubChem CID match. Retrieved: 2026-08-31. Open source record
Scientific classifications and hazard annotations provide context and do not replace the market-specific regulatory decision shown above.
Additional source coverage and match status
| Source | Result | Checked |
|---|---|---|
| NIH PubChem PUG-View | Exact match | 2026-08-31 |
A recorded no-match is useful evidence that the source was checked; it is not a claim that the substance does not exist elsewhere.
Retrieved from NIH PubChem on 2026-08-31 by checksum-valid CAS matching. Chemical properties do not replace the regulatory decision on this page.
N-Ethyl-p-toluenesulfonamide
Platelets (from dilute alcohol or ligroin) or off-white solid. (NTP, 1992) — CAMEO Chemicals
- IUPAC name
- N-ethyl-4-methylbenzenesulfonamide
- Molecular formula
- C9H13NO2S
- Molecular weight
- 199.27 g/mol
- Exact mass
- 199.06669983 Da
- XLogP3
- 1.6
- Topological polar surface area
- 54.6 Ų
- Hydrogen-bond donors
- 1
- Hydrogen-bond acceptors
- 3
- Covalent units
- 1
- Defined stereocentres
- 0
Also known as
16 more reported names
External database identifiers
- ChEMBL:CHEMBL1492809
- EPA DTXSID:DTXSID5025310
- PubMed:21401327
- PubMed:16227185
Retrieved from NIH PubChem on 2026-08-31 by checksum-valid CAS matching. Chemical properties do not replace the regulatory decision on this page.
Inventory details for ETHYL TOSYLAMIDE
INCI name
ETHYL TOSYLAMIDE
Description
N-Ethyltoluene-2-sulphonamide
Record provenance
- Inventory reference
- 33851
- Imported identity
- ETHYL TOSYLAMIDE
- Source update
- 30/06/2017
Annex records for ETHYL TOSYLAMIDE
Key data
- FILM FORMING
- Producing (upon application) a continuous film on the skin, hair or nails.
- PLASTICISER
- Softening and making supple synthetic polymers that otherwise could not be easily deformed, spread or worked out.
Official EU ingredient-name evidence
The ingredient name exactly matches the official 2025 EU glossary of common ingredient names.
Related inventory evidence
Ingredients with overlapping formulation functions
Additional official and scientific sources
11 external databases to check this identity in
Each link searches that source for this identity. What each source is, and its legal weight
How ETHYL TOSYLAMIDE appears in the CosIng inventory
The CosIng inventory lists ETHYL TOSYLAMIDE as a cosmetic ingredient and this page links it to 0 annex records. The inventory entry captures names and identifiers, while the annex records show where the substance is prohibited, restricted or positively listed in EU cosmetics law.
ETHYL TOSYLAMIDE is also tagged with 2 cosmetic functions in the official data. Function labels describe intended use, but they do not replace regulatory review of linked annex records before formulation or labelling work.
Frequently asked questions
Source note for ETHYL TOSYLAMIDE
This page reproduces the CosIng inventory entry for ETHYL TOSYLAMIDE from public European Commission cosmetic ingredient materials and shows linked identifiers even when no direct annex match is currently attached.
Use this inventory page to research ETHYL TOSYLAMIDE and compare linked records, but verify restrictions and legal status against the current official source text and law before making regulatory decisions.
Tools & next steps
Check your formula
Scan a full INCI list to detect ETHYL TOSYLAMIDE and any linked EU annex restrictions or allergen flags.
INCI CheckerSearch similar ingredients
Find other inventory ingredients and annex entries related to ETHYL TOSYLAMIDE, its identifiers or nearby name variants.
Search