Skip to main content
CAS 1 record

CAS 111-96-6

CAS 111-96-6 matches 1 EU annex record across Annex II–VI of Regulation 1223/2009.

Chemical identity and properties

PubChem 2D chemical structure for CAS 111-96-6
CAS 111-96-6PubChem CID 8150

Diglyme

Diglyme is a polyether that is the dimethyl ether derivative of diethylene glycol. It has a role as a xenobiotic, a solvent and an environmental contaminant. It is functionally related to a diethylene glycol. ChEBI

IUPAC name
1-methoxy-2-(2-methoxyethoxy)ethane
Molecular formula
C6H14O3
Molecular weight
134.17 g/mol
Exact mass
134.094294304 Da
XLogP3
-0.4
Topological polar surface area
27.7 Ų
Hydrogen-bond donors
0
Hydrogen-bond acceptors
3
Covalent units
1
Defined stereocentres
0

Also known as

Bis(2-methoxyethyl) etherDIETHYLENE GLYCOL DIMETHYL ETHER2,5,8-TrioxanonaneDimethyl carbitolDi(2-Methoxyethyl) etherBis(2-methoxyethyl)etherGlyme 2Dimethoxydiglycol
16 more reported names
(2-Methoxyethyl) etherEther, bis(2-methoxyethyl)MethyldiglymeDiglycol methyl etherDiethyl glycol dimethyl etherEthane, 1,1'-oxybis[2-methoxy-2-(2-Methoxyethoxy)-1-methoxyethanediethylene glycol dimethylether1,1'-Oxybis(2-methoxyethane)2,2'-oxybis(1-methoxyethane)Ethanol, 2,2'-oxybis-, dimethyl etherM4BH3X0MVZEthane, 1,1'-oxybis(2-methoxy-HISOLVE MDM2,2'-oxybis[1-(methyloxy)ethane]NSC-59726
External database identifiers

Evidence from additional scientific databases

NIH PubChem PUG-View
Exact identifier match8150

Attributed physical-property, hazard, environmental and use annotations.

  • First Aid: EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.; SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.; INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) shou Source: CAMEO Chemicals
  • Signal: Danger Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • GHS Hazard Statements: H226: Flammable liquid and vapor [Warning Flammable liquids]; H360FD: May damage fertility; May damage the unborn child [Danger Reproductive toxicity] Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Precautionary Statement Codes: P203, P210, P233, P240, P241, P242, P243, P280, P303+P361+P353, P318, P370+P378, P403+P235, P405, and P501 (click each P-code to see the statement) Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Signal: Danger Source: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H226 (93%): Flammable liquid and vapor [Warning Flammable liquids]; H360 (90.8%): May damage fertility or the unborn child [Danger Reproductive toxicity] Source: European Chemicals Agency (ECHA)
  • Precautionary Statement Codes: P203, P210, P233, P240, P241, P242, P243, P280, P303+P361+P353, P318, P370+P378, P403+P235, P405, and P501 (click each P-code to see the statement) Source: European Chemicals Agency (ECHA)
  • ECHA C&L Notifications Summary: Aggregated GHS information provided per 811 reports by companies from 16 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Source: European Chemicals Agency (ECHA)
  • Signal: Danger Source: NITE-CMC
  • GHS Hazard Statements: H360: May damage fertility or the unborn child [Danger Reproductive toxicity] Source: NITE-CMC
  • Precautionary Statement Codes: P203, P280, P318, P405, and P501 (click each P-code to see the statement) Source: NITE-CMC
  • Signal: Warning Source: NITE-CMC
  • GHS Hazard Statements: H226: Flammable liquid and vapor [Warning Flammable liquids]; H320: Causes eye irritation [Warning Serious eye damage/eye irritation]; H361: Suspected of damaging fertility or the unborn child [Warning Reproductive toxicity] Source: NITE-CMC
  • NFPA Health Rating: 1 - Materials that, under emergency conditions, can cause significant irritation. Source: Hazardous Substances Data Bank (HSDB)
  • NFPA Fire Rating: 2 - Materials that must be moderately heated or exposed to relatively high ambient temperatures before ignition can occur. Materials would not under normal conditions form hazardous atmospheres with air, but under high ambient temperatures or under moderate heating could release vapor in sufficient quantities to produce hazardous atmospheres with air. Source: Hazardous Substances Data Bank (HSDB)
  • NFPA Instability Rating: 1 - Materials that in themselves are normally stable but that can become unstable at elevated temperatures and pressures. Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Bioconcentration: An estimated BCF of 3 was calculated in fish for diethylene glycol dimethyl ether(SRC), using a log Kow of -0.36(1) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests the potential for bioconcentration in aquatic organisms is low(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 15(SRC), determined from a log Kow of -0.36(2) and a regression-derived equation(3), indicates that diethylene glycol dimethyl ether is expected to have very high mobility in soil(SRC). Volatilization of diethylene glycol dimethyl ether from moist soil surfaces is not expected to be an important fate process(SRC) given an estimated Henry's Law constant of 5.2X10-7 atm-cu m/mole(SRC), derived from its vapor pressure, 2.96 mm Hg(4), and assigned value for water solubility of 1X10+6 mg/L (miscible)(5). Diethylene glycol dimethyl ether is expected to volatilize from dry soil surfaces(SRC) based upon its vapor pressure(4). Diethylene glycol dimethyl ether was degraded 33% after 25 days and a 7 day lag period using an activated sludge from an industry producing the chemical(6), indicating that biodegradation may be an important environmental fate process in soil(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 15(SRC), determined from a log Kow of -0.36(2) and a regression-derived equation(3), indicates that diethylene glycol dimethyl ether is not expected to adsorb to suspended solids and sediment(SRC). Volatilization from water surfaces is not expected(3) based upon an estimated Henry's Law constant of 5.2X10-7 atm-cu m/mole(SRC), derived from its vapor pressure, 2.96 mm Hg(4), and assigned value for water solubility of 1X10+6 mg/L (miscible)(5). According to a classification scheme(6), an estimated BCF of 3(SRC), from its log Kow(2) and a regression-derived equation(7), suggests the potential for bioconcentration in aquatic organisms is low(SRC). Diethylene glycol dimethyl ether was biodegraded 33% after 25 days and a 7 day lag period using an activated sludge from an industry producing the chemical(8), indicating that biodegradation may be an important environmental fate process in water(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), diethylene glycol dimethyl ether, which has a vapor pressure of 2.96 mm Hg at 25 °C(2), is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase diethylene glycol dimethyl ether is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 22 hours(SRC), calculated from its rate constant of 1.75X10-11 cu cm/molecule-sec at 25 °C(3). Diethylene glycol dimethyl ether does not contain chromophores that absorb at wavelengths >290 nm and therefore is not expected to be susceptible to direct photolysis by sunlight(4). Source: Hazardous Substances Data Bank (HSDB)

Mapped by: Existing checksum-valid CAS to unique PubChem CID match. Retrieved: 2026-08-31. Open source record

Scientific classifications and hazard annotations provide context and do not replace the market-specific regulatory decision shown above.

Additional source coverage and match status
SourceResultChecked
NIH PubChem PUG-ViewExact match2026-08-31

A recorded no-match is useful evidence that the source was checked; it is not a claim that the substance does not exist elsewhere.

Retrieved from NIH PubChem on 2026-09-02 by checksum-valid CAS matching. Chemical properties do not replace the regulatory decision on this page.

Records for CAS 111-96-6

1 total

How CAS 111-96-6 is used on this site

CAS 111-96-6 is the Chemical Abstracts Service identifier used to pin this page to a specific substance. In the current dataset, 1 EU annex record shares this identifier, which helps you cross-check whether the same substance appears under one regulatory context or several.

Use this page when a supplier specification, SDS or raw-material dossier gives you CAS 111-96-6 and you need to see every linked Annex II–VI record in one place. The entry cards above are the quickest route to concentration limits, warnings, annex placement and product-type conditions.

Frequently asked questions

A substance identified by CAS 111-96-6 may appear in multiple EU cosmetic regulation annexes when it is subject to different conditions in different contexts. For example, a substance might be restricted under Annex III with specific conditions, and the same CAS might also appear in Annex IV as an approved colorant under separate entry conditions. Each entry must be reviewed individually.

Cross-reference the CAS number against your raw material specification sheets and CoA documents. When a CAS appears in Annex II, verify absence. When it appears in Annex III, verify that concentration limits and product type conditions are met in your formulation. All annex entries sharing this CAS number are listed above.

A CAS number is assigned by the Chemical Abstracts Service (USA) and is globally recognised. An EC number is a European Commission identifier from inventories such as EINECS, ELINCS or the NLP list. Both identifiers may appear in EU cosmetic annex entries. Some substances have both, some have only one, and some older entries may have neither.

The INCI Checker accepts ingredient names, CAS numbers and EC numbers. Check this CAS number directly, then verify the result against supplier specification sheets and every linked annex condition.

Tools & next steps

Check your formula

Scan a full INCI list, then use CAS 111-96-6 to cross-check any supplier documents behind the matched substances.

INCI Checker

Browse annexes

Browse all EU cosmetic regulation annexes by category.

All annexes

Search by name

Search for INCI names, aliases or related identifiers that sit alongside CAS 111-96-6 in your documentation.

Search