跳至主要内容
成分CosIng 更新 2 三月 2011

ANISOLE

Methoxybenzene; Phenol Methyl Ether

ANISOLE 列于欧盟 CosIng 清单,但本页尚未关联任何直接的附件记录。

一览

功能
Perfuming
CAS
100-66-3
EC
202-876-1
欧盟附件
未列入未关联欧盟附件记录。这不是批准。

按市场划分的监管证据

此处跟踪的 13 个市场均未导入该成分的规则。

这描述的是本清单,而非法律。没有已导入的规则并不能证明某成分获准使用:规则可能以其他名称或标识符存在,或存在于尚未在此导入的数据集中。

ANISOLE 的清单详情

INCI 名称

ANISOLE

说明

Methoxybenzene; Phenol Methyl Ether

记录出处

清单参考
39069
已导入的身份
ANISOLE
来源更新
02/03/2011
欧盟委员会 CosIng 来源备注

关键数据

限制
—
功能
  • PERFUMING

    Used for perfume and aromatic raw materials.

化学身份与性质

CAS 100-66-3 的 PubChem 二维化学结构
CAS 100-66-3PubChem CID 7519

Anisole

Anisole appears as a clear straw-colored liquid with an aromatic odor. Insoluble in water and the same density as water. Vapors heavier than air. Moderately toxic by ingestion. A skin irritant. Used to make perfumes, flavorings and as a solvent. — CAMEO Chemicals

IUPAC 名称
anisole
分子式
C7H8O
分子量
108.14 g/mol
精确质量
108.057514874 Da
XLogP3
2.1
拓扑极性表面积
9.2 Ų
氢键供体
0
氢键受体
1
共价单元
1
已定义的立体中心
0

又称

MethoxybenzeneMethyl phenyl etherBenzene, methoxy-PhenoxymethaneAnisolPhenyl methyl etherAnizolPhenol methyl ether
另有 16 个已报告名称
Ether, methyl phenylBenzene, methoxyFEMA No. 2097B3W693GAZHNSC-7920CHEBI:16579RefChem:5555202-876-14-methoxybenzeneHSDB 44Methoxy-Benzenemethylphenyl etherNSC 7920Ether, methyl phenyl-FEMA Number 2097EINECS 202-876-1
外部数据库标识符

来自其他科学数据库的证据

EMBL-EBI ChEBI
标识符精确匹配CHEBI:16579

anisole

A monomethoxybenzene that is benzene substituted by a methoxy group.

配方
C7H8O
平均质量
108.140 g/mol
单同位素质量
108.05751 Da
形式电荷
0
  • monomethoxybenzene — is a (CHEBI:25235)
  • plant metabolite — has role (CHEBI:76924)
  • plant metabolite — has role (CHEBI:76924)
  • monomethoxybenzene — is a (CHEBI:25235)
其他整理的名称
anisoleAnisolAnisoleMethoxybenzeneMethyl phenyl etherPhenol methyl ether
来自此来源的交叉引用
  • CAS: 100-66-3 — KEGG COMPOUND
  • CAS: 100-66-3 — NIST Chemistry WebBook
  • CAS: 100-66-3 — ChemIDplus
  • REGISTRY_NUMBER: 2964 — Gmelin
  • REGISTRY_NUMBER: 506892 — Reaxys
  • MANUAL_X_REF: Anisole — Wikipedia
  • MANUAL_X_REF: C01403 — KEGG COMPOUND
  • MANUAL_X_REF: CPD-395 — MetaCyc
  • MANUAL_X_REF: HMDB0033895 — HMDB

映射方: Exact CAS cross-reference in the ChEBI compound record. 来源更新: 2015-10-23. 检索时间: 2026-08-31. 打开来源记录

NIH PubChem PUG-View
标识符精确匹配7519

Attributed physical-property, hazard, environmental and use annotations.

  • First Aid: Excerpt from ERG Guide 128 [Flammable Liquids (Water-Immiscible)]:; Refer to the "General First Aid" section. Specific First Aid: Wash skin with soap and water. In case of burns, immediately cool affected skin for as long as possible with cold water. Do not remove clothing if adhering to skin. (ERG, 2024) 来源: CAMEO Chemicals
  • ERG2024, Guide 128 (Anisole): General First Aid:; · Call 911 or emergency medical service.; · Ensure that medical personnel are aware of the material(s) involved, take precautions to protect themselves and avoid contamination.; · Move victim to fresh air if it can be done safely.; · Administer oxygen if breathing is difficult.; · If victim is not breathing:; -- DO NOT perform mouth-to-mouth resuscitation; the victim may have ingested or inhaled the substance.; -- If equipped and pulse detected, wash face and mouth, then give artificial respiration using a proper respiratory medical device (bag-valve mask, pocket mask equipped with a one-way valve or other device).; -- If no pulse detected or no respiratory medical device available, provide continuous compressions. Conduct a pulse check every two minutes or monitor for any signs of spontaneous respirations.; · Remove and isolate contaminated clothing and shoes.; · For minor skin contact, avoid spreading material on unaffected skin.; · In case of contact with substance, remove immediately by flushing skin or eyes with running water for at least 20 minutes.; · For severe burns, immediate medical attention is required.; · Effects of exposure (inhalation, ingestion, 来源: Emergency Response Guidebook (ERG)
  • Note: This chemical does not meet GHS hazard criteria for < 0.1% (1 of 2013) of reports. 来源: European Chemicals Agency (ECHA)
  • Signal: Warning 来源: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H226 (> 99.9%): Flammable liquid and vapor [Warning Flammable liquids]; H315 (76.5%): Causes skin irritation [Warning Skin corrosion/irritation]; H319 (78.1%): Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H336 (13.1%): May cause drowsiness or dizziness [Warning Specific target organ toxicity, single exposure; Narcotic effects] 来源: European Chemicals Agency (ECHA)
  • Precautionary Statement Codes: P210, P233, P240, P241, P242, P243, P261, P264, P264+P265, P271, P280, P302+P352, P303+P361+P353, P304+P340, P305+P351+P338, P319, P321, P332+P317, P337+P317, P362+P364, P370+P378, P403+P233, P403+P235, P405, and P501 (click each P-code to see the statement) 来源: European Chemicals Agency (ECHA)
  • ECHA C&L Notifications Summary: Aggregated GHS information provided per 2013 reports by companies from 29 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Reported as not meeting GHS hazard criteria per 1 of 2013 reports by companies.; There are 28 notifications provided by 2012 of 2013 reports by companies with hazard statement code(s).; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. 来源: European Chemicals Agency (ECHA)
  • Signal: Warning 来源: NITE-CMC
  • GHS Hazard Statements: H226: Flammable liquid and vapor [Warning Flammable liquids] 来源: NITE-CMC
  • Precautionary Statement Codes: P210, P233, P240, P241, P242, P243, P280, P303+P361+P353, P370+P378, P403+P235, and P501 (click each P-code to see the statement) 来源: NITE-CMC
  • NFPA Health Rating: 1 - Materials that, under emergency conditions, can cause significant irritation. 来源: Hazardous Substances Data Bank (HSDB)
  • NFPA Fire Rating: 2 - Materials that must be moderately heated or exposed to relatively high ambient temperatures before ignition can occur. Materials would not under normal conditions form hazardous atmospheres with air, but under high ambient temperatures or under moderate heating could release vapor in sufficient quantities to produce hazardous atmospheres with air. 来源: Hazardous Substances Data Bank (HSDB)
  • NFPA Instability Rating: 0 - Materials that in themselves are normally stable, even under fire conditions. 来源: Hazardous Substances Data Bank (HSDB)
  • Environmental Bioconcentration: Using its log Kow, 2.11(2), one estimates a BCF of 24 for anisole using a recommended regression equation(3). The bioconcentration of anisole in aquatic organisms was determined in a model aquatic ecosystem maintained at 26.7 °C with 12 hr of simulated daylight exposure(1). After 24 hr exposure, the ecological magnification for anisole was (organism, bioaccumulation factor): fish, 22; mosquito larva, 27; algae, 563; daphnia, 771; snails, 899(1). There were signs of considerable metabolism in all species. O-dealkylate occurred in fish and snail, hydroxylation to o- and p-methoxyphenols occurred in all species except daphnia, and conjugation occurred in alga and snails(1). According to a recommended classification scheme(4), this BCF value and its metabolism in aquatic organisms would indicate that anisole has a low potential for bioconcentration in fish and aquatic organisms(SRC). 来源: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: TERRESTRIAL FATE: Based on a recommended classification scheme(2), the experimentally-determined Koc value for anisole of 35(1) suggests that it will be highly mobile in soil and may leach(SRC). Its estimated Henry's Law constant(3), 4.35X10-3 atm-cu m/mole(SRC), vapor pressure, 3.4 mm Hg at 25 °C(5), and low adsorptivity to soil indicate that volatilization may be an important fate process from both moist and dry soil surfaces(4,SRC). Anisole has been demonstrated to be readily biodegradable in screening tests(6-8) and therefore may readily biodegrade in soil(SRC). 来源: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: AQUATIC FATE: Anisole should volatilize from water based on its estimated Henry's Law constant of 4.4X10-3 atm-cu m/mole(SRC), derived from a fragment constant estimation method(3). Estimated half-lives for a model river and model lake are 3.2 hr and 4.2 days, respectively(4,SRC). Anisole has been demonstrated to be readily biodegradable in screening tests(5,6) and therefore may biodegrade in natural water(SRC). When anisole was added to a model aquatic ecosystem with fish, mosquito larva, alga, daphnia, and snails and incubated for 24 hr, the concentration of anisole was considerably reduced (by approximately 93%) and degradation products were found in the water(1). A Russian study reported that anisole was stable in water for 4 days(2). The details of the study were not available. According to a recommended classification scheme(8), experimental bioaccumulation factors obtained from a model aquatic ecosystem along with evidence of metabolism in aquatic organisms(1) suggests that bioaccumulation of anisole should not be a concern(SRC). 来源: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: ATMOSPHERIC FATE: According to a theory of gas/particle partitioning of semivolatile organic compounds in the atmosphere(2), anisole, which has a vapor pressure of 3.5 mm Hg at 25 °C(3) will exist in the ambient atmosphere as a vapor(SRC). Vapor-phase anisole is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 22 hr(1,SRC). Anisole's water solubility in water is 1520 mg/L(4), and therefore it may be washed out of the atmosphere by rain(SRC). 来源: Hazardous Substances Data Bank (HSDB)

映射方: Existing checksum-valid CAS to unique PubChem CID match. 检索时间: 2026-08-31. 打开来源记录

科学分类和危害注释仅提供背景信息,不能取代上方所示针对具体市场的监管决定。

其他来源的覆盖范围和匹配状态
来源结果已检查
EMBL-EBI ChEBI精确匹配2026-08-31
NIH PubChem PUG-View精确匹配2026-08-31

已记录的无匹配结果是该来源已被检查的有效证据;这并不表示该物质在别处不存在。

于 2026-08-31 通过校验和有效的 CAS 匹配从美国国立卫生研究院 (NIH) PubChem 检索。化学性质不能取代本页的监管决定。

配方功能重叠的成分

其他官方和科学来源

11 个可用于核查此身份的外部数据库

ANISOLE 在 CosIng 清单中的呈现方式

CosIng 清单将 ANISOLE 列为化妆品成分,本页将其关联到 0 条附件记录。清单条目记录名称和标识符,而附件记录显示该物质在欧盟化妆品法规中被禁用、限用或列入准用清单的情况。

在官方数据中,ANISOLE 还被标记了 1 项化妆品功能。功能标识描述预期用途,但不能取代在配方或标签工作之前对关联附件记录的监管审查。

常见问题

ANISOLE 列于欧盟 CosIng 成分清单,目前没有关联直接的附件限制记录。没有附件链接并不保证可无限制使用——配方前请务必对照现行官方 CosIng 数据库核实。

根据欧盟 CosIng 清单,ANISOLE 带有以下功能标识:

CAS 100-66-3 可能出现在多条欧盟附件记录中。查看 CAS 查询页面可显示共用该标识符的所有附件 II–VI 条目,有助于识别同一化学物质在不同附件中的监管状态。

使用 INCI 检查器在选定市场中筛查完整成分表,或在所有受支持的市场数据集中对比该物质。

ANISOLE 的来源说明

本页转载欧盟委员会公开化妆品成分资料中 ANISOLE 的 CosIng 清单条目,即使目前没有附加直接的附件匹配,也会显示关联的标识符。

请使用本清单页面研究 ANISOLE 并对比关联记录,但在作出监管决定之前,请对照现行官方来源文本和法律核实限制和法律地位。

工具与后续步骤

检查您的配方

扫描完整的 INCI 成分表,检出 ANISOLE 及任何关联的欧盟附件限制或致敏原标记。

INCI 检查器

搜索相似成分

查找与 ANISOLE、其标识符或相近名称变体相关的其他清单成分和附件条目。

搜索