본문으로 건너뛰기
원료CosIng 업데이트 2 3월 2011

ANISOLE

Methoxybenzene; Phenol Methyl Ether

ANISOLE은(는) EU CosIng 목록에 등재되어 있지만, 이 페이지에는 아직 직접 연결된 부속서 기록이 없습니다.

한눈에 보기

기능
Perfuming
CAS
100-66-3
EC
202-876-1
EU 부속서
등재되지 않음연결된 EU 부속서 기록이 없습니다. 이는 승인이 아닙니다.

시장별 규제 근거

여기에서 추적하는 시장 13곳 중 어느 곳에도 이 원료의 규칙이 가져와지지 않았습니다.

이는 이 목록에 관한 설명이지 법에 관한 설명이 아닙니다. 가져온 규칙이 없다는 것이 원료가 허용된다는 근거는 아닙니다. 규칙은 다른 명칭이나 식별자로, 또는 아직 이곳에 가져오지 않은 데이터세트에 존재할 수 있습니다.

ANISOLE의 목록 세부 정보

INCI 명칭

ANISOLE

설명

Methoxybenzene; Phenol Methyl Ether

기록 출처

목록 참조
39069
가져온 정체
ANISOLE
출처 업데이트
02/03/2011
유럽연합 집행위원회 CosIng 출처 주석

주요 데이터

제한 사항
—
기능
  • PERFUMING

    Used for perfume and aromatic raw materials.

화학적 정체 및 특성

CAS 100-66-3의 PubChem 2D 화학 구조
CAS 100-66-3PubChem CID 7519

Anisole

Anisole appears as a clear straw-colored liquid with an aromatic odor. Insoluble in water and the same density as water. Vapors heavier than air. Moderately toxic by ingestion. A skin irritant. Used to make perfumes, flavorings and as a solvent. — CAMEO Chemicals

IUPAC 명칭
anisole
분자식
C7H8O
분자량
108.14 g/mol
정확한 질량
108.057514874 Da
XLogP3
2.1
위상 극성 표면적
9.2 Ų
수소 결합 공여체
0
수소 결합 수용체
1
공유결합 단위
1
정의된 입체중심
0

다른 이름

MethoxybenzeneMethyl phenyl etherBenzene, methoxy-PhenoxymethaneAnisolPhenyl methyl etherAnizolPhenol methyl ether
보고된 명칭 16개 더 보기
Ether, methyl phenylBenzene, methoxyFEMA No. 2097B3W693GAZHNSC-7920CHEBI:16579RefChem:5555202-876-14-methoxybenzeneHSDB 44Methoxy-Benzenemethylphenyl etherNSC 7920Ether, methyl phenyl-FEMA Number 2097EINECS 202-876-1
외부 데이터베이스 식별자

추가 과학 데이터베이스의 근거

EMBL-EBI ChEBI
식별자 정확히 일치CHEBI:16579

anisole

A monomethoxybenzene that is benzene substituted by a methoxy group.

처방
C7H8O
평균 질량
108.140 g/mol
단일 동위원소 질량
108.05751 Da
형식 전하
0
  • monomethoxybenzene — is a (CHEBI:25235)
  • plant metabolite — has role (CHEBI:76924)
  • plant metabolite — has role (CHEBI:76924)
  • monomethoxybenzene — is a (CHEBI:25235)
추가 선별 명칭
anisoleAnisolAnisoleMethoxybenzeneMethyl phenyl etherPhenol methyl ether
이 출처의 상호 참조
  • CAS: 100-66-3 — KEGG COMPOUND
  • CAS: 100-66-3 — NIST Chemistry WebBook
  • CAS: 100-66-3 — ChemIDplus
  • REGISTRY_NUMBER: 2964 — Gmelin
  • REGISTRY_NUMBER: 506892 — Reaxys
  • MANUAL_X_REF: Anisole — Wikipedia
  • MANUAL_X_REF: C01403 — KEGG COMPOUND
  • MANUAL_X_REF: CPD-395 — MetaCyc
  • MANUAL_X_REF: HMDB0033895 — HMDB

매핑 기준: Exact CAS cross-reference in the ChEBI compound record. 출처 업데이트: 2015-10-23. 가져온 시각: 2026-08-31. 출처 기록 열기

NIH PubChem PUG-View
식별자 정확히 일치7519

Attributed physical-property, hazard, environmental and use annotations.

  • First Aid: Excerpt from ERG Guide 128 [Flammable Liquids (Water-Immiscible)]:; Refer to the "General First Aid" section. Specific First Aid: Wash skin with soap and water. In case of burns, immediately cool affected skin for as long as possible with cold water. Do not remove clothing if adhering to skin. (ERG, 2024) 출처: CAMEO Chemicals
  • ERG2024, Guide 128 (Anisole): General First Aid:; · Call 911 or emergency medical service.; · Ensure that medical personnel are aware of the material(s) involved, take precautions to protect themselves and avoid contamination.; · Move victim to fresh air if it can be done safely.; · Administer oxygen if breathing is difficult.; · If victim is not breathing:; -- DO NOT perform mouth-to-mouth resuscitation; the victim may have ingested or inhaled the substance.; -- If equipped and pulse detected, wash face and mouth, then give artificial respiration using a proper respiratory medical device (bag-valve mask, pocket mask equipped with a one-way valve or other device).; -- If no pulse detected or no respiratory medical device available, provide continuous compressions. Conduct a pulse check every two minutes or monitor for any signs of spontaneous respirations.; · Remove and isolate contaminated clothing and shoes.; · For minor skin contact, avoid spreading material on unaffected skin.; · In case of contact with substance, remove immediately by flushing skin or eyes with running water for at least 20 minutes.; · For severe burns, immediate medical attention is required.; · Effects of exposure (inhalation, ingestion, 출처: Emergency Response Guidebook (ERG)
  • Note: This chemical does not meet GHS hazard criteria for < 0.1% (1 of 2013) of reports. 출처: European Chemicals Agency (ECHA)
  • Signal: Warning 출처: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H226 (> 99.9%): Flammable liquid and vapor [Warning Flammable liquids]; H315 (76.5%): Causes skin irritation [Warning Skin corrosion/irritation]; H319 (78.1%): Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H336 (13.1%): May cause drowsiness or dizziness [Warning Specific target organ toxicity, single exposure; Narcotic effects] 출처: European Chemicals Agency (ECHA)
  • Precautionary Statement Codes: P210, P233, P240, P241, P242, P243, P261, P264, P264+P265, P271, P280, P302+P352, P303+P361+P353, P304+P340, P305+P351+P338, P319, P321, P332+P317, P337+P317, P362+P364, P370+P378, P403+P233, P403+P235, P405, and P501 (click each P-code to see the statement) 출처: European Chemicals Agency (ECHA)
  • ECHA C&L Notifications Summary: Aggregated GHS information provided per 2013 reports by companies from 29 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Reported as not meeting GHS hazard criteria per 1 of 2013 reports by companies.; There are 28 notifications provided by 2012 of 2013 reports by companies with hazard statement code(s).; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. 출처: European Chemicals Agency (ECHA)
  • Signal: Warning 출처: NITE-CMC
  • GHS Hazard Statements: H226: Flammable liquid and vapor [Warning Flammable liquids] 출처: NITE-CMC
  • Precautionary Statement Codes: P210, P233, P240, P241, P242, P243, P280, P303+P361+P353, P370+P378, P403+P235, and P501 (click each P-code to see the statement) 출처: NITE-CMC
  • NFPA Health Rating: 1 - Materials that, under emergency conditions, can cause significant irritation. 출처: Hazardous Substances Data Bank (HSDB)
  • NFPA Fire Rating: 2 - Materials that must be moderately heated or exposed to relatively high ambient temperatures before ignition can occur. Materials would not under normal conditions form hazardous atmospheres with air, but under high ambient temperatures or under moderate heating could release vapor in sufficient quantities to produce hazardous atmospheres with air. 출처: Hazardous Substances Data Bank (HSDB)
  • NFPA Instability Rating: 0 - Materials that in themselves are normally stable, even under fire conditions. 출처: Hazardous Substances Data Bank (HSDB)
  • Environmental Bioconcentration: Using its log Kow, 2.11(2), one estimates a BCF of 24 for anisole using a recommended regression equation(3). The bioconcentration of anisole in aquatic organisms was determined in a model aquatic ecosystem maintained at 26.7 °C with 12 hr of simulated daylight exposure(1). After 24 hr exposure, the ecological magnification for anisole was (organism, bioaccumulation factor): fish, 22; mosquito larva, 27; algae, 563; daphnia, 771; snails, 899(1). There were signs of considerable metabolism in all species. O-dealkylate occurred in fish and snail, hydroxylation to o- and p-methoxyphenols occurred in all species except daphnia, and conjugation occurred in alga and snails(1). According to a recommended classification scheme(4), this BCF value and its metabolism in aquatic organisms would indicate that anisole has a low potential for bioconcentration in fish and aquatic organisms(SRC). 출처: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: TERRESTRIAL FATE: Based on a recommended classification scheme(2), the experimentally-determined Koc value for anisole of 35(1) suggests that it will be highly mobile in soil and may leach(SRC). Its estimated Henry's Law constant(3), 4.35X10-3 atm-cu m/mole(SRC), vapor pressure, 3.4 mm Hg at 25 °C(5), and low adsorptivity to soil indicate that volatilization may be an important fate process from both moist and dry soil surfaces(4,SRC). Anisole has been demonstrated to be readily biodegradable in screening tests(6-8) and therefore may readily biodegrade in soil(SRC). 출처: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: AQUATIC FATE: Anisole should volatilize from water based on its estimated Henry's Law constant of 4.4X10-3 atm-cu m/mole(SRC), derived from a fragment constant estimation method(3). Estimated half-lives for a model river and model lake are 3.2 hr and 4.2 days, respectively(4,SRC). Anisole has been demonstrated to be readily biodegradable in screening tests(5,6) and therefore may biodegrade in natural water(SRC). When anisole was added to a model aquatic ecosystem with fish, mosquito larva, alga, daphnia, and snails and incubated for 24 hr, the concentration of anisole was considerably reduced (by approximately 93%) and degradation products were found in the water(1). A Russian study reported that anisole was stable in water for 4 days(2). The details of the study were not available. According to a recommended classification scheme(8), experimental bioaccumulation factors obtained from a model aquatic ecosystem along with evidence of metabolism in aquatic organisms(1) suggests that bioaccumulation of anisole should not be a concern(SRC). 출처: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: ATMOSPHERIC FATE: According to a theory of gas/particle partitioning of semivolatile organic compounds in the atmosphere(2), anisole, which has a vapor pressure of 3.5 mm Hg at 25 °C(3) will exist in the ambient atmosphere as a vapor(SRC). Vapor-phase anisole is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 22 hr(1,SRC). Anisole's water solubility in water is 1520 mg/L(4), and therefore it may be washed out of the atmosphere by rain(SRC). 출처: Hazardous Substances Data Bank (HSDB)

매핑 기준: Existing checksum-valid CAS to unique PubChem CID match. 가져온 시각: 2026-08-31. 출처 기록 열기

과학적 분류와 유해성 주석은 맥락을 제공할 뿐이며, 위에 표시된 시장별 규제 판단을 대체하지 않습니다.

추가 출처 적용 범위 및 일치 상태
출처결과확인됨
EMBL-EBI ChEBI정확히 일치2026-08-31
NIH PubChem PUG-View정확히 일치2026-08-31

기록된 불일치는 출처를 확인했다는 유용한 근거이며, 해당 물질이 다른 곳에 존재하지 않는다는 주장이 아닙니다.

체크섬이 유효한 CAS 일치를 통해 2026-08-31에 NIH PubChem에서 가져왔습니다. 화학적 특성은 이 페이지의 규제 판단을 대체하지 않습니다.

처방 기능이 겹치는 원료

추가 공식 및 과학 출처

이 정체를 확인할 외부 데이터베이스 11개

CosIng 목록에서 ANISOLE이(가) 나타나는 방식

CosIng 목록은 ANISOLE을(를) 화장품 원료로 나열하며, 이 페이지는 이를 부속서 기록 0건과 연결합니다. 목록 항목은 명칭과 식별자를 담고 있으며, 부속서 기록은 해당 물질이 EU 화장품 법령에서 사용금지, 사용제한 또는 허용 목록(포지티브 리스트)에 있는 위치를 보여 줍니다.

ANISOLE은(는) 공식 데이터에서 화장품 기능 1개로도 태그되어 있습니다. 기능 표시는 의도된 용도를 설명하지만, 처방 또는 표시 작업 전에 연결된 부속서 기록에 대한 규제 검토를 대체하지 않습니다.

자주 묻는 질문

ANISOLE은(는) 현재 직접 연결된 부속서 제한 기록 없이 EU CosIng 원료 목록에 등재되어 있습니다. 부속서 링크가 없다고 해서 제한 없는 사용이 보장되는 것은 아니므로, 처방하기 전에 항상 현행 공식 CosIng 데이터베이스로 확인하세요.

EU CosIng 목록에 따르면 ANISOLE에는 다음 기능이 지정되어 있습니다:

CAS 100-66-3은(는) 여러 EU 부속서 기록에 나타날 수 있습니다. CAS 조회 페이지에서는 이 식별자를 공유하는 모든 부속서 II–VI 항목을 보여 주며, 동일한 화학 물질의 부속서 간 규제 상태를 파악하는 데 유용합니다.

INCI 검사기를 사용하여 선택한 시장 전반에서 전체 원료 목록을 선별하거나, 지원되는 모든 시장 데이터세트에서 이 물질을 비교하세요.

ANISOLE의 출처 주석

이 페이지는 공개된 유럽연합 집행위원회 화장품 원료 자료에서 가져온 ANISOLE의 CosIng 목록 항목을 재현하며, 현재 직접 연결된 부속서 일치 항목이 없는 경우에도 연결된 식별자를 표시합니다.

이 목록 페이지를 이용해 ANISOLE을(를) 조사하고 연결된 기록을 비교하되, 규제 판단을 내리기 전에 제한 사항과 법적 상태를 현행 공식 출처 본문 및 법령으로 확인하세요.

도구 및 다음 단계

처방 확인

전체 INCI 목록을 검사하여 ANISOLE 및 연결된 EU 부속서 제한 사항이나 알레르겐 표시를 찾으세요.

INCI 검사기

유사 원료 검색

ANISOLE, 그 식별자 또는 인접한 명칭 변형과 관련된 다른 목록 원료와 부속서 항목을 찾으세요.

검색