Zum Hauptinhalt springen
InhaltsstoffCosIng-Aktualisierung 2 Mär 2011

ANISOLE

Methoxybenzene; Phenol Methyl Ether

ANISOLE ist im EU-CosIng-Verzeichnis aufgeführt, aber auf dieser Seite sind noch keine direkten Anhangseinträge verknüpft.

Auf einen Blick

Funktion
Perfuming
CAS
100-66-3
EC
202-876-1
EU-Anhänge
Nicht aufgeführtEs ist kein EU-Anhangseintrag verknüpft. Das ist keine Zulassung.

Regulatorische Belege nach Markt

Für keinen der hier erfassten 13 Märkte wurde eine Vorschrift zu diesem Inhaltsstoff importiert.

Das beschreibt dieses Verzeichnis, nicht das Recht. Eine fehlende importierte Vorschrift ist kein Beleg dafür, dass ein Inhaltsstoff zulässig ist: Eine Vorschrift kann unter einem anderen Namen oder einer anderen Kennung oder in einem hier noch nicht importierten Datensatz existieren.

Verzeichnisangaben zu ANISOLE

INCI-Name

ANISOLE

Beschreibung

Methoxybenzene; Phenol Methyl Ether

Herkunft des Eintrags

Verzeichnisverweis
39069
Importierte Identität
ANISOLE
Quellenaktualisierung
02/03/2011
Quellenhinweise zu CosIng der Europäischen Kommission

Kerndaten

Beschränkung
—
Funktion
  • PERFUMING

    Used for perfume and aromatic raw materials.

Chemische Identität und Eigenschaften

Chemische 2D-Struktur aus PubChem für CAS 100-66-3
CAS 100-66-3PubChem CID 7519

Anisole

Anisole appears as a clear straw-colored liquid with an aromatic odor. Insoluble in water and the same density as water. Vapors heavier than air. Moderately toxic by ingestion. A skin irritant. Used to make perfumes, flavorings and as a solvent. — CAMEO Chemicals

IUPAC-Name
anisole
Summenformel
C7H8O
Molekulargewicht
108.14 g/mol
Exakte Masse
108.057514874 Da
XLogP3
2,1
Topologische polare Oberfläche
9,2 Ų
Wasserstoffbrücken-Donoren
0
Wasserstoffbrücken-Akzeptoren
1
Kovalente Einheiten
1
Definierte Stereozentren
0

Auch bekannt als

MethoxybenzeneMethyl phenyl etherBenzene, methoxy-PhenoxymethaneAnisolPhenyl methyl etherAnizolPhenol methyl ether
16 weitere gemeldete Namen
Ether, methyl phenylBenzene, methoxyFEMA No. 2097B3W693GAZHNSC-7920CHEBI:16579RefChem:5555202-876-14-methoxybenzeneHSDB 44Methoxy-Benzenemethylphenyl etherNSC 7920Ether, methyl phenyl-FEMA Number 2097EINECS 202-876-1
Kennungen in externen Datenbanken

Belege aus weiteren wissenschaftlichen Datenbanken

EMBL-EBI ChEBI
Exakter KennungstrefferCHEBI:16579

anisole

A monomethoxybenzene that is benzene substituted by a methoxy group.

Rezeptur
C7H8O
Durchschnittsmasse
108.140 g/mol
Monoisotopische Masse
108.05751 Da
Formale Ladung
0
  • monomethoxybenzene — is a (CHEBI:25235)
  • plant metabolite — has role (CHEBI:76924)
  • plant metabolite — has role (CHEBI:76924)
  • monomethoxybenzene — is a (CHEBI:25235)
Weitere kuratierte Namen
anisoleAnisolAnisoleMethoxybenzeneMethyl phenyl etherPhenol methyl ether
Querverweise aus dieser Quelle
  • CAS: 100-66-3 — KEGG COMPOUND
  • CAS: 100-66-3 — NIST Chemistry WebBook
  • CAS: 100-66-3 — ChemIDplus
  • REGISTRY_NUMBER: 2964 — Gmelin
  • REGISTRY_NUMBER: 506892 — Reaxys
  • MANUAL_X_REF: Anisole — Wikipedia
  • MANUAL_X_REF: C01403 — KEGG COMPOUND
  • MANUAL_X_REF: CPD-395 — MetaCyc
  • MANUAL_X_REF: HMDB0033895 — HMDB

Zugeordnet durch: Exact CAS cross-reference in the ChEBI compound record. Quelle aktualisiert: 2015-10-23. Abgerufen: 2026-08-31. Quelleneintrag öffnen

NIH PubChem PUG-View
Exakter Kennungstreffer7519

Attributed physical-property, hazard, environmental and use annotations.

  • First Aid: Excerpt from ERG Guide 128 [Flammable Liquids (Water-Immiscible)]:; Refer to the "General First Aid" section. Specific First Aid: Wash skin with soap and water. In case of burns, immediately cool affected skin for as long as possible with cold water. Do not remove clothing if adhering to skin. (ERG, 2024) Quelle: CAMEO Chemicals
  • ERG2024, Guide 128 (Anisole): General First Aid:; · Call 911 or emergency medical service.; · Ensure that medical personnel are aware of the material(s) involved, take precautions to protect themselves and avoid contamination.; · Move victim to fresh air if it can be done safely.; · Administer oxygen if breathing is difficult.; · If victim is not breathing:; -- DO NOT perform mouth-to-mouth resuscitation; the victim may have ingested or inhaled the substance.; -- If equipped and pulse detected, wash face and mouth, then give artificial respiration using a proper respiratory medical device (bag-valve mask, pocket mask equipped with a one-way valve or other device).; -- If no pulse detected or no respiratory medical device available, provide continuous compressions. Conduct a pulse check every two minutes or monitor for any signs of spontaneous respirations.; · Remove and isolate contaminated clothing and shoes.; · For minor skin contact, avoid spreading material on unaffected skin.; · In case of contact with substance, remove immediately by flushing skin or eyes with running water for at least 20 minutes.; · For severe burns, immediate medical attention is required.; · Effects of exposure (inhalation, ingestion, Quelle: Emergency Response Guidebook (ERG)
  • Note: This chemical does not meet GHS hazard criteria for < 0.1% (1 of 2013) of reports. Quelle: European Chemicals Agency (ECHA)
  • Signal: Warning Quelle: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H226 (> 99.9%): Flammable liquid and vapor [Warning Flammable liquids]; H315 (76.5%): Causes skin irritation [Warning Skin corrosion/irritation]; H319 (78.1%): Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H336 (13.1%): May cause drowsiness or dizziness [Warning Specific target organ toxicity, single exposure; Narcotic effects] Quelle: European Chemicals Agency (ECHA)
  • Precautionary Statement Codes: P210, P233, P240, P241, P242, P243, P261, P264, P264+P265, P271, P280, P302+P352, P303+P361+P353, P304+P340, P305+P351+P338, P319, P321, P332+P317, P337+P317, P362+P364, P370+P378, P403+P233, P403+P235, P405, and P501 (click each P-code to see the statement) Quelle: European Chemicals Agency (ECHA)
  • ECHA C&L Notifications Summary: Aggregated GHS information provided per 2013 reports by companies from 29 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Reported as not meeting GHS hazard criteria per 1 of 2013 reports by companies.; There are 28 notifications provided by 2012 of 2013 reports by companies with hazard statement code(s).; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Quelle: European Chemicals Agency (ECHA)
  • Signal: Warning Quelle: NITE-CMC
  • GHS Hazard Statements: H226: Flammable liquid and vapor [Warning Flammable liquids] Quelle: NITE-CMC
  • Precautionary Statement Codes: P210, P233, P240, P241, P242, P243, P280, P303+P361+P353, P370+P378, P403+P235, and P501 (click each P-code to see the statement) Quelle: NITE-CMC
  • NFPA Health Rating: 1 - Materials that, under emergency conditions, can cause significant irritation. Quelle: Hazardous Substances Data Bank (HSDB)
  • NFPA Fire Rating: 2 - Materials that must be moderately heated or exposed to relatively high ambient temperatures before ignition can occur. Materials would not under normal conditions form hazardous atmospheres with air, but under high ambient temperatures or under moderate heating could release vapor in sufficient quantities to produce hazardous atmospheres with air. Quelle: Hazardous Substances Data Bank (HSDB)
  • NFPA Instability Rating: 0 - Materials that in themselves are normally stable, even under fire conditions. Quelle: Hazardous Substances Data Bank (HSDB)
  • Environmental Bioconcentration: Using its log Kow, 2.11(2), one estimates a BCF of 24 for anisole using a recommended regression equation(3). The bioconcentration of anisole in aquatic organisms was determined in a model aquatic ecosystem maintained at 26.7 °C with 12 hr of simulated daylight exposure(1). After 24 hr exposure, the ecological magnification for anisole was (organism, bioaccumulation factor): fish, 22; mosquito larva, 27; algae, 563; daphnia, 771; snails, 899(1). There were signs of considerable metabolism in all species. O-dealkylate occurred in fish and snail, hydroxylation to o- and p-methoxyphenols occurred in all species except daphnia, and conjugation occurred in alga and snails(1). According to a recommended classification scheme(4), this BCF value and its metabolism in aquatic organisms would indicate that anisole has a low potential for bioconcentration in fish and aquatic organisms(SRC). Quelle: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: TERRESTRIAL FATE: Based on a recommended classification scheme(2), the experimentally-determined Koc value for anisole of 35(1) suggests that it will be highly mobile in soil and may leach(SRC). Its estimated Henry's Law constant(3), 4.35X10-3 atm-cu m/mole(SRC), vapor pressure, 3.4 mm Hg at 25 °C(5), and low adsorptivity to soil indicate that volatilization may be an important fate process from both moist and dry soil surfaces(4,SRC). Anisole has been demonstrated to be readily biodegradable in screening tests(6-8) and therefore may readily biodegrade in soil(SRC). Quelle: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: AQUATIC FATE: Anisole should volatilize from water based on its estimated Henry's Law constant of 4.4X10-3 atm-cu m/mole(SRC), derived from a fragment constant estimation method(3). Estimated half-lives for a model river and model lake are 3.2 hr and 4.2 days, respectively(4,SRC). Anisole has been demonstrated to be readily biodegradable in screening tests(5,6) and therefore may biodegrade in natural water(SRC). When anisole was added to a model aquatic ecosystem with fish, mosquito larva, alga, daphnia, and snails and incubated for 24 hr, the concentration of anisole was considerably reduced (by approximately 93%) and degradation products were found in the water(1). A Russian study reported that anisole was stable in water for 4 days(2). The details of the study were not available. According to a recommended classification scheme(8), experimental bioaccumulation factors obtained from a model aquatic ecosystem along with evidence of metabolism in aquatic organisms(1) suggests that bioaccumulation of anisole should not be a concern(SRC). Quelle: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: ATMOSPHERIC FATE: According to a theory of gas/particle partitioning of semivolatile organic compounds in the atmosphere(2), anisole, which has a vapor pressure of 3.5 mm Hg at 25 °C(3) will exist in the ambient atmosphere as a vapor(SRC). Vapor-phase anisole is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 22 hr(1,SRC). Anisole's water solubility in water is 1520 mg/L(4), and therefore it may be washed out of the atmosphere by rain(SRC). Quelle: Hazardous Substances Data Bank (HSDB)

Zugeordnet durch: Existing checksum-valid CAS to unique PubChem CID match. Abgerufen: 2026-08-31. Quelleneintrag öffnen

Wissenschaftliche Klassifizierungen und Gefahrenannotationen liefern Kontext und ersetzen nicht die oben gezeigte marktspezifische regulatorische Entscheidung.

Weitere Quellenabdeckung und Trefferstatus
QuelleErgebnisGeprüft
EMBL-EBI ChEBIExakter Treffer2026-08-31
NIH PubChem PUG-ViewExakter Treffer2026-08-31

Ein erfasster Nicht-Treffer ist ein nützlicher Beleg dafür, dass die Quelle geprüft wurde; er ist keine Behauptung, dass der Stoff anderswo nicht existiert.

Am 2026-08-31 von NIH PubChem durch prüfsummengültigen CAS-Abgleich abgerufen. Chemische Eigenschaften ersetzen nicht die regulatorische Entscheidung auf dieser Seite.

Inhaltsstoffe mit sich überschneidenden Rezepturfunktionen

Weitere amtliche und wissenschaftliche Quellen

11 externe Datenbanken zur Prüfung dieser Identität

Wie ANISOLE im CosIng-Verzeichnis erscheint

Das CosIng-Verzeichnis führt ANISOLE als kosmetischen Inhaltsstoff, und diese Seite verknüpft ihn mit 0 Anhangseinträgen. Der Verzeichniseintrag erfasst Namen und Kennungen, während die Anhangseinträge zeigen, wo der Stoff im EU-Kosmetikrecht verboten, beschränkt oder positiv gelistet ist.

ANISOLE ist in den amtlichen Daten außerdem mit 1 kosmetischen Funktion gekennzeichnet. Funktionsbezeichnungen beschreiben die beabsichtigte Verwendung, ersetzen aber nicht die regulatorische Prüfung verknüpfter Anhangseinträge vor der Rezeptierung oder Kennzeichnung.

Häufig gestellte Fragen

ANISOLE ist im EU-CosIng-Inhaltsstoffverzeichnis aufgeführt; derzeit sind keine direkten Einträge zu Anhangsbeschränkungen verknüpft. Das Fehlen einer Anhangsverknüpfung garantiert keine unbeschränkte Verwendung – prüfen Sie vor der Rezeptierung stets die aktuelle amtliche CosIng-Datenbank.

Nach dem EU-CosIng-Verzeichnis trägt ANISOLE die folgende(n) Funktionsbezeichnung(en):

CAS 100-66-3 kann in mehreren EU-Anhangseinträgen vorkommen. Die CAS-Suchseite zeigt alle Einträge der Anhänge II–VI mit dieser Kennung; das ist nützlich, um den anhangsübergreifenden regulatorischen Status desselben chemischen Stoffs zu erkennen.

Nutzen Sie den INCI-Checker, um eine vollständige Inhaltsstoffliste über ausgewählte Märkte hinweg zu prüfen, oder vergleichen Sie diesen Stoff über alle unterstützten Marktdatensätze.

Quellenhinweis zu ANISOLE

Diese Seite gibt den CosIng-Verzeichniseintrag für ANISOLE aus öffentlichen Materialien der Europäischen Kommission zu kosmetischen Inhaltsstoffen wieder und zeigt verknüpfte Kennungen auch dann, wenn derzeit kein direkter Anhangstreffer zugeordnet ist.

Nutzen Sie diese Verzeichnisseite, um ANISOLE zu recherchieren und verknüpfte Einträge zu vergleichen; verifizieren Sie Beschränkungen und Rechtsstatus jedoch anhand des aktuellen amtlichen Quellentextes und Rechts, bevor Sie regulatorische Entscheidungen treffen.

Werkzeuge und nächste Schritte

Rezeptur prüfen

Eine vollständige INCI-Liste prüfen, um ANISOLE und etwaige verknüpfte EU-Anhangsbeschränkungen oder Allergenmarkierungen zu erkennen.

INCI-Checker

Ähnliche Inhaltsstoffe suchen

Weitere Inhaltsstoffe aus dem Verzeichnis und Anhangseinträge finden, die mit ANISOLE, seinen Kennungen oder nahen Namensvarianten zusammenhängen.

Suche