Benzyl cinnamate
2-Propenoic acid, 3-phenyl-, phenylmethyl ester
Benzyl cinnamate ist in Anhang III aufgeführt und darf nur unter den in diesem Eintrag genannten Bedingungen verwendet werden.
Dieser Stoff steht auf der EU-Liste der Duftstoffallergene, die in der Inhaltsstoffliste einzeln genannt werden müssen und nicht durch das Wort „parfum“ abgedeckt sind, sobald sie in einem Produkt, das auf der Haut verbleibt, 0,001% oder in einem abzuspülenden Produkt 0,01% überschreiten.
Die Kennzeichnung ist eine Pflicht nach Artikel 19 und keine Verwendungsbeschränkung. Den Allergeneintrag ansehen
Eintragsdetails
Sonstige Beschränkungen
The presence of the substance must be indicated in the list of ingredients referred to in Article 19(1)g when its concentration exceeds:
- 0.001% in leave-on products
- 0.01% in rinse-off products
INCI-Glossarname
Benzyl cinnamate
Chemische Bezeichnung
2-Propenoic acid, 3-phenyl-, phenylmethyl ester
Regulatorische Informationen
SCCS-Gutachten
- Opinion concerning Essential Oils
- Opinion concerning Fragrance Allergy in Consumers - A Review of the Problem - Analysis of the need for appropriate Consumer Information and Identification of Consumer Allergens
- Opinion concerning the Interim Position on Fragrance Allergy
- Memorandum on the SCCNFP Opinion concerning Fragrance Allergy
Identifizierte Inhaltsstoffe
EU-Duftstoffallergen
Dieser Stoff ist mit einer EU-Referenz zu Duftstoffallergenen verknüpft. Prüfen Sie den aktuellen Eintrag in Anhang III auf den Kennzeichnungsschwellenwert und etwaige zusätzliche Bedingungen.
Kerndaten
Chemische Identität und Eigenschaften

Benzyl Cinnamate
Benzyl cinnamate is the cinnamate ester derived from cinnamic acid and benzyl alcohol. Occuring in Balsam of Peru and Tolu balsam, in Sumatra and Penang benzoin, and as the main constituent of copaiba balsam, it is used in heavy oriental perfumes, as a fixative and as a flavouring agent. It has a role as a flavouring agent, a fragrance, a fixative, an epitope and an antigen. — ChEBI
- IUPAC-Name
- benzyl (E)-3-phenylprop-2-enoate
- Summenformel
- C16H14O2
- Molekulargewicht
- 238.28 g/mol
- Exakte Masse
- 238.099379685 Da
- XLogP3
- 3,8
- Topologische polare Oberfläche
- 26,3 Ų
- Wasserstoffbrücken-Donoren
- 0
- Wasserstoffbrücken-Akzeptoren
- 2
- Kovalente Einheiten
- 1
- Definierte Stereozentren
- 0
Auch bekannt als
16 weitere gemeldete Namen
Kennungen in externen Datenbanken
- ChEBI:CHEBI:146174
- ChEMBL:CHEMBL361197
- EPA DTXSID:DTXSID00880905
- PubMed:29540657
- PubMed:27965148
- PubMed:27270453
- PubMed:22023385
- PubMed:20491607
- PubMed:15464616
Belege aus weiteren wissenschaftlichen Datenbanken
NIH PubChem PUG-View
Attributed physical-property, hazard, environmental and use annotations.
- Boiling Point: 228-230 °C @ 22 mm Hg Quelle: Hazardous Substances Data Bank (HSDB)
- Boiling Point: 350 °C; 195 °C (5 mm Hg) Quelle: Joint FAO/WHO Expert Committee on Food Additives (JECFA)
- Color/Form: WHITE TO PALE-YELLOW, FUSED, CRYSTALLINE SOLID Quelle: Hazardous Substances Data Bank (HSDB)
- Color/Form: Crystals from 95% ethanol Quelle: Hazardous Substances Data Bank (HSDB)
- Color/Form: White crystals Quelle: Hazardous Substances Data Bank (HSDB)
- Density: 1.109 AT 15 °C Quelle: Hazardous Substances Data Bank (HSDB)
- Density: PRISMS; SADTLER REFERENCE NUMBER: 1520 (IR, PRISM); 430 (UV); 104 (NMR); DENSITY: 1.109 @ 15 °C /TRANS/ Quelle: Hazardous Substances Data Bank (HSDB)
- Flash Point: GREATER THAN 100 °C Quelle: Hazardous Substances Data Bank (HSDB)
- Melting Point: 39 °C Quelle: Hazardous Substances Data Bank (HSDB)
- Melting Point: MELTING POINT: 35-36 °C /TRANS/; 30 °C /CIS/ Quelle: Hazardous Substances Data Bank (HSDB)
- Odor: Sweet odor of balsam Quelle: Hazardous Substances Data Bank (HSDB)
- Physical Description: Solid with a sweet odor of balsam; Practically insoluble in water; mp = 39 deg C; [Merck Index] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Physical Description: White to pale yellow solid Quelle: Joint FAO/WHO Expert Committee on Food Additives (JECFA)
- Solubility: 1:8 IN 90% ALCOHOL Quelle: Hazardous Substances Data Bank (HSDB)
- Solubility: Practically insol in water, propylene glycol and glycerin. Sol in alcohol, ether, oils. Quelle: Hazardous Substances Data Bank (HSDB)
- Solubility: insoluble in water; soluble in oils Quelle: Joint FAO/WHO Expert Committee on Food Additives (JECFA)
- Solubility: very soluble (in ethanol) Quelle: Joint FAO/WHO Expert Committee on Food Additives (JECFA)
- Vapor Pressure: 1 mm Hg @ 173.8 °C Quelle: Hazardous Substances Data Bank (HSDB)
- Carcinogen Classification: No indication of carcinogenicity to humans (not listed by IARC). Quelle: Toxin and Toxin Target Database (T3DB)
- Signal: Warning Quelle: European Chemicals Agency (ECHA)
- GHS Hazard Statements: H317 (99.8%): May cause an allergic skin reaction [Warning Sensitization, Skin]; H411 (99.5%): Toxic to aquatic life with long lasting effects [Hazardous to the aquatic environment, long-term hazard] Quelle: European Chemicals Agency (ECHA)
- Precautionary Statement Codes: P261, P272, P273, P280, P302+P352, P321, P333+P317, P362+P364, P391, and P501 (click each P-code to see the statement) Quelle: European Chemicals Agency (ECHA)
- ECHA C&L Notifications Summary: Aggregated GHS information provided per 1794 reports by companies from 13 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Quelle: European Chemicals Agency (ECHA)
- Environmental Bioconcentration: An estimated BCF of 270 was calculated for benzyl cinnamate(SRC), using an estimated log Kow of 4.1(1) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests the potential for bioconcentration in aquatic organisms is high(SRC). Quelle: Hazardous Substances Data Bank (HSDB)
- Environmental Fate: TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 10,400(SRC), determined from a structure estimation method(2), indicates that benzyl cinnamate is expected to be immobile in soil(SRC). Volatilization of benzyl cinnamate from moist soil surfaces is not expected to be an important fate process(SRC) given an estimated Henry's Law constant of 3.3X10-7 atm-cu m/mole(SRC), using a fragment constant estimation method(3). Benzyl cinnamate is not expected to volatilize from dry soil surfaces(SRC) based upon an estimated vapor pressure of 1X10-5 mm Hg(4). Quelle: Hazardous Substances Data Bank (HSDB)
- Environmental Fate: AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 10,390(SRC), determined from a structure estimation method(2), indicates that benzyl cinnamate is expected to adsorb to suspended solids and sediment(SRC). Volatilization from water surfaces is not expected(3) based upon an estimated Henry's Law constant of 3.3X10-7 atm-cu m/mole(SRC), developed using a fragment constant estimation method(4). A base-catalyzed second-order hydrolysis rate constant of 3.8X10-2 L/mole-sec(SRC) was estimated using a structure estimation method(5); this corresponds to half-lives of 6 years and 211 days at pH values of 7 and 8, respectively(5). According to a classification scheme(6), an estimated BCF of 269(SRC), from an estimated log Kow of 4.06(7) and a regression derived equation(8), suggests the potential for bioconcentration in aquatic organisms is high(SRC). Quelle: Hazardous Substances Data Bank (HSDB)
- Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), benzyl cinnamate, which has an estimated vapor pressure of 1X10-5 mm Hg at 25 °C(2), will exist in both the vapor and particulate phases in the ambient atmosphere. Vapor-phase benzyl cinnamate is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 14 hours for the cis-isomer and 13 hours for the trans-isomer of benzyl cinnamate(SRC), calculated from their rate constants of 28X10-12 and 31X10-12 cu cm/molecule-sec at 25 °C, respectively(SRC), determined using a structure estimation method(3). Particulate-phase benzyl cinnamate may be removed from the air by wet and dry deposition(SRC). Quelle: Hazardous Substances Data Bank (HSDB)
- Sources/Uses: Constituent of storax, Peru, and Tolu balsams; [Merck Index] Used in flavors and perfumes; [HSDB] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Uses: In artificial flavors, in perfumes, mainly as a fixative Quelle: Hazardous Substances Data Bank (HSDB)
- Uses: Fixative in perfumes and as a component of heavy, oriental perfumes. Quelle: Hazardous Substances Data Bank (HSDB)
Zugeordnet durch: Existing checksum-valid CAS to unique PubChem CID match. Abgerufen: 2026-08-31. Quelleneintrag öffnen
Wissenschaftliche Klassifizierungen und Gefahrenannotationen liefern Kontext und ersetzen nicht die oben gezeigte marktspezifische regulatorische Entscheidung.
Weitere Quellenabdeckung und Trefferstatus
| Quelle | Ergebnis | Geprüft |
|---|---|---|
| EMBL-EBI ChEBI | Kein exakter Eintrag | 2026-08-31 |
| NIH PubChem PUG-View | Exakter Treffer | 2026-08-31 |
Ein erfasster Nicht-Treffer ist ein nützlicher Beleg dafür, dass die Quelle geprüft wurde; er ist keine Behauptung, dass der Stoff anderswo nicht existiert.
Am 2026-09-02 von NIH PubChem durch prüfsummengültigen CAS-Abgleich abgerufen. Chemische Eigenschaften ersetzen nicht die regulatorische Entscheidung auf dieser Seite.
Verzeichnisverknüpfungen für Benzyl cinnamate
Verwandte Einträge zu Benzyl cinnamate
Für diesen Eintrag gibt es nur wenige direkte Treffer; daher werden auch nahe liegende Einträge aus Anhang III angezeigt.
Citronellol
Amylcinnamyl alcohol
Limonene
Was Anhang III für Benzyl cinnamate bedeutet
Benzyl cinnamate ist ein beschränkter Stoff nach Anhang III der EU-Kosmetikverordnung (EG) Nr. 1223/2009. Seine Verwendung in kosmetischen Mitteln ist nur unter den im obigen Eintrag genannten besonderen Bedingungen zulässig, einschließlich geltender Konzentrationsgrenzen, Beschränkungen der Produktart und erforderlicher Warnhinweise.
Wird dieser Stoff in einer Rezeptur verwendet, müssen alle Bedingungen – Höchstkonzentration, Produktbereich und Warnhinweise – gleichzeitig erfüllt sein. Die Einhaltung einer Bedingung hebt die anderen nicht auf.
Dieser Eintrag ist zum Abgleich von Namen und Kennungen mit 1 Inhaltsstoff des CosIng-Verzeichnisses verknüpft. Die Seite zeigt außerdem 12 verwandte Anhangseinträge mit überschneidenden Kennungen, Anhangslogik oder Namensmustern.
Compliance-Checkliste
- Dokumentieren Sie die Verwendungsbedingungen in der Produktinformationsdatei (PIF).
- Dieser Stoff ist ein regulierter Duftstoffallergen. Geben Sie ihn mit seinem INCI-Namen auf dem Etikett an, wenn er in Produkten, die auf der Haut verbleiben, in mehr als 0,001% oder in abzuspülenden Produkten in mehr als 0,01% enthalten ist.
Häufig gestellte Fragen
Quellenhinweis zu Anhang III, Eintrag Benzyl cinnamate
Diese Seite fasst einen Eintrag aus Anhang III für Benzyl cinnamate aus öffentlichen Materialien der Europäischen Kommission zu kosmetischen Mitteln zusammen und ergänzt, soweit verfügbar, verknüpfte Treffer aus dem Verzeichnis oder bei Kennungen.
Nutzen Sie diese Eintragsseite, um die Bedingungen aus Anhang III für Benzyl cinnamate zu prüfen; bestätigen Sie jede endgültige regulatorische Entscheidung jedoch anhand des aktuellen amtlichen Anhangswortlauts und der Quelldateien.
Werkzeuge und nächste Schritte
Rezeptur prüfen
Fügen Sie eine vollständige INCI-Liste ein, um Benzyl cinnamate und andere markierte EU-Anhangseinträge in einem Durchgang zu finden.
INCI-CheckerEinträge vergleichen
Benzyl cinnamate nebeneinander mit einem anderen Anhangseintrag vergleichen, um Unterschiede bei Beschränkungen, Konzentrationen und Anhangszuordnung zu prüfen.
VergleichenDen Anhang durchsuchen
Alle Einträge in Anhang III ansehen und die regulatorischen Bedingungen der Stoffe in diesem Anhang vergleichen.
Anhang III öffnen