Aller au contenu principal
Annexe II Entrée 1689 CMRModifiée 11 Nov 2022

4-methylpentan-2-one; isobutyl methyl ketone (MIBK)

4-methylpentan-2-one; isobutyl methyl ketone (MIBK) figure à l’annexe II en tant que substance interdite dans les produits cosmétiques mis sur le marché de l’UE.

Substance interdite— Annexe II, Règlement (CE) n° 1223/2009
Entrée: 1689
CMR

Détails de la fiche

Nom chimique

4-methylpentan-2-one; isobutyl methyl ketone (MIBK)

Nom chimique / IUPAC

4-methylpentan-2-one; isobutyl methyl ketone (MIBK)

Informations réglementaires

Règlement

(EU) 2022/1531

Voir toutes les entrées fixées par cet acte

CMR

CatégorieCarcinogenicMutagenicReprotoxic
Cat. 2✓——

Données clés

Annexe
Numéro d’entrée
1689

Identité et propriétés chimiques

Structure chimique 2D PubChem pour le CAS 108-10-1
CAS 108-10-1PubChem CID 7909

Methyl Isobutyl Ketone

Methyl isobutyl ketone is a ketone. — ChEBI

Nom IUPAC
4-methylpentan-2-one
Formule moléculaire
C6H12O
Masse moléculaire
100.16 g/mol
Masse exacte
100.088815002 Da
XLogP3
1,3
Surface polaire topologique
17,1 Ų
Donneurs de liaisons hydrogène
0
Accepteurs de liaisons hydrogène
1
Unités covalentes
1
Stéréocentres définis
0

Également connu sous le nom de

4-Methyl-2-pentanoneIsopropylacetoneIsobutyl methyl ketoneHexoneMIBK2-Pentanone, 4-methyl-2-Methyl-4-pentanoneShell mibk
16 autres noms signalés
4-Methyl-2-oxopentaneMethylisobutylketonIsohexanoneHexonMetilisobutilchetoneMetyloizobutyloketonIsobutyl-methylketon2-Methylpropyl methyl ketoneIsopropyl acetoneMethyl-isobutyl-cetone4-Methyl-2-pentanon4-Metilpentan-2-oneKetone, isobutyl methyl4-Methyl-pentan-2-onFEMA No. 2731Rcra waste number U161
Identifiants de bases de données externes

Preuves issues de bases de données scientifiques complémentaires

NIH PubChem PUG-View
Correspondance exacte d’identifiant7909

Attributed physical-property, hazard, environmental and use annotations.

  • First Aid: EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.; SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.; INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) shou Source: CAMEO Chemicals
  • ERG2024, Guide 127 (Methyl isobutyl ketone): General First Aid:; · Call 911 or emergency medical service.; · Ensure that medical personnel are aware of the material(s) involved, take precautions to protect themselves and avoid contamination.; · Move victim to fresh air if it can be done safely.; · Administer oxygen if breathing is difficult.; · If victim is not breathing:; -- DO NOT perform mouth-to-mouth resuscitation; the victim may have ingested or inhaled the substance.; -- If equipped and pulse detected, wash face and mouth, then give artificial respiration using a proper respiratory medical device (bag-valve mask, pocket mask equipped with a one-way valve or other device).; -- If no pulse detected or no respiratory medical device available, provide continuous compressions. Conduct a pulse check every two minutes or monitor for any signs of spontaneous respirations.; · Remove and isolate contaminated clothing and shoes.; · For minor skin contact, avoid spreading material on unaffected skin.; · In case of contact with substance, remove immediately by flushing skin or eyes with running water for at least 20 minutes.; · For severe burns, immediate medical attention is required.; · Effects of exposure (inhalation, ingestion, Source: Emergency Response Guidebook (ERG)
  • First Aid: (General first aid procedures); Eye: Irrigate immediately - If this chemical contacts the eyes, immediately wash (irrigate) the eyes with large amounts of water, occasionally lifting the lower and upper lids. Get medical attention immediately.; Skin: Water flush promptly - If this chemical contacts the skin, flush the contaminated skin with water promptly. If this chemical penetrates the clothing, immediately remove the clothing and flush the skin with water promptly. If irritation persists after washing, get medical attention.; Breathing: Respiratory support; Swallow: Medical attention immediately - If this chemical has been swallowed, get medical attention immediately. Source: The National Institute for Occupational Safety and Health (NIOSH)
  • Signal: Danger Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • GHS Hazard Statements: H225: Highly Flammable liquid and vapor [Danger Flammable liquids]; H319: Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H332: Harmful if inhaled [Warning Acute toxicity, inhalation]; H336: May cause drowsiness or dizziness [Warning Specific target organ toxicity, single exposure; Narcotic effects]; H351: Suspected of causing cancer [Warning Carcinogenicity] Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Precautionary Statement Codes: P203, P210, P233, P240, P241, P242, P243, P261, P264+P265, P271, P280, P303+P361+P353, P304+P340, P305+P351+P338, P317, P318, P319, P337+P317, P370+P378, P403+P233, P403+P235, P405, and P501 (click each P-code to see the statement) Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Note: This chemical does not meet GHS hazard criteria for < 0.1% (2 of 4455) of reports. Source: European Chemicals Agency (ECHA)
  • Signal: Danger Source: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H225 (> 99.9%): Highly Flammable liquid and vapor [Danger Flammable liquids]; H319 (> 99.9%): Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H332 (97.1%): Harmful if inhaled [Warning Acute toxicity, inhalation]; H335 (93.7%): May cause respiratory irritation [Warning Specific target organ toxicity, single exposure; Respiratory tract irritation]; H336 (11.5%): May cause drowsiness or dizziness [Warning Specific target organ toxicity, single exposure; Narcotic effects]; H351 (11.8%): Suspected of causing cancer [Warning Carcinogenicity] Source: European Chemicals Agency (ECHA)
  • Precautionary Statement Codes: P203, P210, P233, P240, P241, P242, P243, P261, P264+P265, P271, P280, P303+P361+P353, P304+P340, P305+P351+P338, P317, P318, P319, P337+P317, P370+P378, P403+P233, P403+P235, P405, and P501 (click each P-code to see the statement) Source: European Chemicals Agency (ECHA)
  • ECHA C&L Notifications Summary: Aggregated GHS information provided per 4455 reports by companies from 80 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Reported as not meeting GHS hazard criteria per 2 of 4455 reports by companies.; There are 79 notifications provided by 4453 of 4455 reports by companies with hazard statement code(s).; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Source: European Chemicals Agency (ECHA)
  • Signal: Danger Source: NITE-CMC
  • GHS Hazard Statements: H350: May cause cancer [Danger Carcinogenicity] Source: NITE-CMC
  • Precautionary Statement Codes: P203, P280, P318, P405, and P501 (click each P-code to see the statement) Source: NITE-CMC
  • GHS Hazard Statements: H225: Highly Flammable liquid and vapor [Danger Flammable liquids]; H320: Causes eye irritation [Warning Serious eye damage/eye irritation]; H331: Toxic if inhaled [Danger Acute toxicity, inhalation]; H335: May cause respiratory irritation [Warning Specific target organ toxicity, single exposure; Respiratory tract irritation]; H336: May cause drowsiness or dizziness [Warning Specific target organ toxicity, single exposure; Narcotic effects]; H351: Suspected of causing cancer [Warning Carcinogenicity]; H372: Causes damage to organs through prolonged or repeated exposure [Danger Specific target organ toxicity, repeated exposure] Source: NITE-CMC
  • NFPA Health Rating: 1 - Materials that, under emergency conditions, can cause significant irritation. Source: Hazardous Substances Data Bank (HSDB)
  • NFPA Fire Rating: 3 - Liquids and solids that can be ignited under almost all ambient temperature conditions. Materials produce hazardous atmospheres with air under almost all ambient temperatures or, though unaffected by ambient temperatures, are readily ignited under almost all conditions. Source: Hazardous Substances Data Bank (HSDB)
  • NFPA Instability Rating: 0 - Materials that in themselves are normally stable, even under fire conditions. Source: Hazardous Substances Data Bank (HSDB)
  • Cosmetic Ingredient Review Conclusion: Based on the available animal and clinical data in this report, the CIR Expert Panel concludes that MIBK is safe as used in nail polish removers and as an alcohol denaturant in cosmetic products. Source: Cosmetic Ingredient Review (CIR)
  • Cosmetic Ingredient Review Finding(s): Safe for use in cosmetics, with qualifications Source: Cosmetic Ingredient Review (CIR)
  • Toxicity Summary: IDENTIFICATION AND USE: Methyl isobutyl ketone (MIBK) is a colorless liquid. It is used as a solvent for gums, resins, nitrocellulose, paints, varnishes, and lacquers. It is also used as denaturant for rubbing alcohol, in the manufacture of methyl amyl alcohol, and in dry-cleaning preparations. It is also widely used in rubber chemicals for the production of tyres. HUMAN STUDIES: Symptoms and signs of poisoning include: irritation of the eyes, skin, and respiratory tract, as well as CNS depression. Gastrointestinal pain and hepatic toxicity may occur with exposure to high concentrations. In workers exposed to up to 2050 mg MIBK/cu m (500 ppm) for 20-30 min per day and to 328 mg/cu m (80 ppm) for much of the remainder of the working day, over half of the 19 workers complained of weakness, loss of appetite, headache, eye irritation, stomach ache, nausea, vomiting, and sore throat. A few of the workers experienced insomnia, somnolence, heartburn, intestinal pain, and some unsteadiness. Four workers had slightly enlarged livers and six had a nonspecific colitis. Prolonged or repeated skin contact may cause drying and flaking of the skin. Accidental aspiration of liquid MIBK can cause c Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Bioconcentration: An estimated BCF of 3 was calculated in fish for methyl isobutyl ketone(SRC), using a log Kow of 1.31(1) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests the potential for bioconcentration in aquatic organisms is low(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 70(SRC), determined from a log Kow of 1.31(2) and a regression-derived equation(3), indicates that methyl isobutyl ketone is expected to have high mobility in soil(SRC). Volatilization of methyl isobutyl ketone from moist soil surfaces is expected to be an important fate process(SRC) given an estimated Henry's Law constant of 1.4X10-4 atm-cu m/mole(SRC) derived from its vapor pressure, 19.9 mm Hg(4), and water solubility, 19,000 mg/L(5). Methyl isobutyl ketone is expected to volatilize from dry soil surfaces(SRC) based upon its vapor pressure(4). An 84% of theoretical BOD using activated sludge in the Japanese MITI test(6) suggests that biodegradation is an important environmental fate process in soil(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 70(SRC), determined from a log Kow of 1.31(2) and a regression-derived equation(3), indicates that methyl isobutyl ketone is not expected to adsorb to suspended solids and sediment(SRC). Volatilization from water surfaces is expected(3) based upon an estimated Henry's Law constant of 1.4X10-4 atm-cu m/mole(SRC), derived from its vapor pressure, 19.9 mm Hg(4), and water solubility, 19,000 mg/L(5). Using this Henry's Law constant and an estimation method(3), volatilization half-lives for a model river and model lake are 9 hours and 6 days, respectively(SRC). According to a classification scheme(6), an estimated BCF of 3(SRC), from its log Kow(2) and a regression-derived equation(7), suggests the potential for bioconcentration in aquatic organisms is low(SRC). An 84% of theoretical BOD using activated sludge in the Japanese MITI test(8) suggests that biodegradation is an important environmental fate process in water(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), methyl isobutyl ketone, which has a vapor pressure of 19.9 mm Hg at 25 °C(2), is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase methyl isobutyl ketone is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 30(SRC), calculated from its rate constant of 1.3X10-11 cu cm/molecule-sec at 25 °C(3). Methyl isobutyl ketone absorbs UV at wavelengths >290 nm(3) and, therefore, may be susceptible to direct photolysis by sunlight(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Industry Uses: Sealant (barrier); Not Known or Reasonably Ascertainable; Intermediate; Surface modifier; Solvent; Other; Fuel Source: EPA Chemical Data Reporting (CDR)
  • Cosmetic Ingredient Review Link: CIR ingredient: MIBK Source: Cosmetic Ingredient Review (CIR)
  • Uses: Methyl isobutyl ketone is used as a solvent for gums, resins, paints, varnishes, lacquers, and nitrocellulose, as an alcohol denaturant, in the extraction of rare metals, and as a synthetic flavoring adjuvant. Source: EPA Hazardous Air Pollutants
  • Sources/Uses: Used as a solvent in the paint, synthetic resin, adhesive, aircraft, and pharmaceutical manufacturing industries; [ACGIH] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Industrial Processes with risk of exposure: Textiles (Fiber & Fabric Manufacturing) [Category: Industry]; Painting (Solvents) [Category: Paint]; Working with Glues and Adhesives [Category: Other]; Plastic Composites Manufacturing [Category: Industry] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Uses: Solvent for gums, resins, nitrocellulose, paints, varnishes, and lacquers. Denaturant for rubbing alcohol. In manufacture of methyl amyl alcohol. In dry-cleaning preparations. Source: Hazardous Substances Data Bank (HSDB)
  • Uses: ... Extraction processes including extraction of uranium from fission products; organic synthesis ... . Source: Hazardous Substances Data Bank (HSDB)
  • Uses: ... Denaturant and solvent in cosmetic products. Source: Hazardous Substances Data Bank (HSDB)
  • Uses: The major application of 4-methyl-2-pentanone is as a solvent for vinyl, epoxy, and acrylic resins, for natural resins, and for nitrocellulose. A further use is as a solvent for dyes in the printing industry. 4-Methyl-2-pentanone is also a versatile extracting agent, e.g., for the production of antibiotics, or the removal of paraffins from mineral oil for the production of lubricating oils. Source: Hazardous Substances Data Bank (HSDB)
  • Uses: For more Uses (Complete) data for Methyl isobutyl ketone (9 total), please visit the HSDB record page. Source: Hazardous Substances Data Bank (HSDB)

Mis en correspondance par: Existing checksum-valid CAS to unique PubChem CID match. Récupéré le: 2026-08-31. Ouvrir la fiche source

Les classifications scientifiques et les annotations de danger apportent du contexte et ne remplacent pas la décision réglementaire propre au marché indiquée ci-dessus.

Couverture des sources complémentaires et état des correspondances
SourceRésultatVérifié
NIH PubChem PUG-ViewCorrespondance exacte2026-08-31

Une absence de correspondance enregistrée est une preuve utile que la source a été vérifiée ; ce n’est pas l’affirmation que la substance n’existe pas ailleurs.

Récupéré depuis NIH PubChem le 2026-09-02 par correspondance CAS à somme de contrôle valide. Les propriétés chimiques ne remplacent pas la décision réglementaire de cette page.

Liens d’inventaire pour 4-methylpentan-2-one; isobutyl methyl ketone (MIBK)

Inventaire Shared CAS number
Réf. 35359

MIBK

CAS: 108-10-1
EC: 203-550-1

Les correspondances directes sont limitées pour cette fiche ; des entrées voisines de l’annexe II sont donc également affichées.

Annexe II 1686
Fiche voisine dans la même annexe

3-methylpyrazole

CAS: 1453-58-3
EC: 215-925-7
Annexe II 1695
Fiche voisine dans la même annexe

Ammonium bromide

CAS: 12124-97-9
EC: 235-183-8

Ce que signifie l’annexe II pour 4-methylpentan-2-one; isobutyl methyl ketone (MIBK)

4-methylpentan-2-one; isobutyl methyl ketone (MIBK) figure comme substance interdite à l’annexe II du règlement (CE) n° 1223/2009 relatif aux produits cosmétiques et ne doit pas être ajouté intentionnellement. L’article 17 traite séparément des traces involontaires, techniquement inévitables dans le respect des bonnes pratiques de fabrication et compatibles avec l’exigence de sécurité de l’article 3.

Les formulateurs doivent contrôler leurs ingrédients et matières premières afin de s’assurer qu’aucun ne contient cette substance. Les fournisseurs doivent fournir, sur demande, une documentation confirmant son absence.

Cette fiche est liée à 1 ingrédient de l’inventaire CosIng pour le recoupement des noms et des identifiants. La page fait également apparaître 12 fiches d’annexe associées présentant des identifiants, une logique d’annexe ou des schémas de dénomination qui se recoupent.

Liste de contrôle de conformité

  • Vérifiez que cette substance est absente de toutes les matières premières et formulations finies.
  • Demandez aux fournisseurs de matières premières une attestation d’absence ou un certificat d’analyse.
  • Consignez le résultat du contrôle dans le dossier d’information produit (DIP).
  • Cette substance a une classification CMR. Examinez le tableau CMR ci-dessus et vérifiez le statut actuel dans les annexes II/III avant toute utilisation.

Questions fréquentes

Oui. 4-methylpentan-2-one; isobutyl methyl ketone (MIBK) figure à l’annexe II du règlement (CE) n° 1223/2009 relatif aux produits cosmétiques et est interdit en tant qu’ingrédient cosmétique ajouté intentionnellement. L’article 17 prévoit une exception étroite pour les petites quantités involontaires techniquement inévitables dans le respect des bonnes pratiques de fabrication, à condition que le produit reste sûr au sens de l’article 3.

Le CAS 108-10-1 est l’identifiant numérique unique attribué à 4-methylpentan-2-one; isobutyl methyl ketone (MIBK) par le Chemical Abstracts Service. Dans les travaux de conformité cosmétique, le numéro CAS sert à recouper la substance entre les bases de données réglementaires, les spécifications de matières premières et les rapports d’évaluation de la sécurité. Plusieurs entrées d’annexe de l’UE peuvent partager le même numéro CAS si la même substance apparaît dans des conditions différentes ou dans des annexes différentes.

4-methylpentan-2-one; isobutyl methyl ketone (MIBK) a une classification CMR (cancérogène, mutagène ou toxique pour la reproduction) en vertu du règlement CLP de l’UE. Selon l’article 15 du règlement (CE) n° 1223/2009 relatif aux produits cosmétiques, les substances CMR des catégories 1A ou 1B sont interdites dans les cosmétiques, sauf autorisation expresse. Les substances CMR de catégorie 2 ne peuvent être utilisées que si le SCCS les a jugées sûres. Vérifiez toujours le statut actuel dans les annexes et les éventuelles dérogations applicables avant toute utilisation.

Utilisez l’outil Vérificateur INCI de ce site pour coller votre liste complète d’ingrédients (INCI) et l’analyser par rapport à toutes les entrées des annexes II à VI. L’outil met en évidence les ingrédients correspondant à des fiches soumises à restrictions, interdites ou signalées comme allergènes. C’est utile pour un contrôle rapide de conformité des formules de produits finis ou des déclarations de matières premières.

Note de source pour la fiche 4-methylpentan-2-one; isobutyl methyl ketone (MIBK) de l’annexe II

Cette page résume une fiche de l’annexe II pour 4-methylpentan-2-one; isobutyl methyl ketone (MIBK) à partir de documents publics de la Commission européenne sur les cosmétiques et ajoute les correspondances d’inventaire ou d’identifiants associées lorsqu’elles sont disponibles.

Utilisez cette page de fiche pour examiner les conditions de l’annexe II pour 4-methylpentan-2-one; isobutyl methyl ketone (MIBK), mais confirmez toute décision réglementaire finale auprès du libellé officiel en vigueur de l’annexe et des fichiers sources.

Outils et étapes suivantes

Vérifiez votre formule

Collez une liste INCI complète pour détecter 4-methylpentan-2-one; isobutyl methyl ketone (MIBK) et d’autres fiches d’annexe de l’UE signalées en une seule passe.

Vérificateur INCI

Comparer des entrées

Comparez 4-methylpentan-2-one; isobutyl methyl ketone (MIBK) côte à côte avec une autre fiche d’annexe pour examiner les différences de restrictions, de concentrations et d’annexe.

Comparer

Parcourir l’annexe

Consultez toutes les fiches de l’annexe II et comparez les conditions réglementaires entre les substances de cette annexe.

Ouvrir l’annexe II