Substances cosmétiques soumises à restrictions — annexe III
L’annexe III du règlement (CE) n° 1223/2009 relatif aux produits cosmétiques énumère les substances qui ne peuvent être utilisées que dans des conditions précises. Cette page regroupée contient actuellement 373 fiches avec une logique de restriction, des limites de concentration, des avertissements ou des conditions par type de produit à examiner.
Filtrer cette annexe
Fonctionnement de cette annexe
Annex III is the conditional list: 373 substances that may be used, but only within the limit, product type and warning the entry states. The condition attached to a number usually decides more cases than the number.
- 373 restricted substances; 211 carry a maximum concentration and 167 a mandatory warning.
- An entry is a package — concentration, product type and warning travel together and cannot be taken apart.
- Some limits are a pH range or a state after mixing rather than a percentage.
- Where a substance can both preserve and act, this annex covers the active use and Annex V the preservative one.
Reading an Annex III entry as a maximum concentration is the mistake this whole annex invites. The concentration is one term of a condition that also names the product types it applies to, often a pH range or a state after mixing, and usually a warning that has to appear on the label. A formula meeting the number in a product type the entry does not name has not met the entry.
The product-type conditions are lists rather than principles. Salicylic acid sits at 0.5% in body lotion, eye shadow, mascara, eyeliner, lipstick and roll-on deodorant, and at 2.0% in other products; there is no category underneath that list to reason from, and a product either is one of the named things or is not. Kojic acid is permitted in face and hand products, which means a body serum has no entry to use regardless of concentration.
Several entries set limits that are not percentages at all. Thioglycolic acid carries a ready-for-use pH range alongside its concentration. Sodium and potassium hydroxide, used to adjust pH, are limited by the pH reached rather than by how much is added. Hydrogen peroxide is measured as 'present or released', which reaches materials that are not hydrogen peroxide but yield it.
Finally, purpose. A substance that can both preserve a product and act in it appears twice — here for the active use and in Annex V for the preservative one — with different limits. Climbazole is 0.5% as a preservative in rinse-off shampoo and 2.0% as an anti-dandruff active in the same format. Which entry governs is settled by what the product presents itself as doing, so the claim on the pack becomes part of the compliance answer.
Vérifié par rapport à
Fiches de l’annexe III
373 au total| Entrée | Substance | CAS | Concentration max. | Signalements |
|---|---|---|---|---|
| 2a | THIOGLYCOLIC ACIDCAS 68-11-1 | 68-11-1 | Voir les conditions | |
| 2b | Thioglycolic acid esters | — | Voir les conditions | |
| 3 | OXALIC ACIDCAS 144-62-7 | 144-62-7 | 5% | |
| 4 | AMMONIACAS 7664-41-7 / 1336-21-6 | 7664-41-7 / 1336-21-6 | 6% (as NH3) | |
| 5 | Chloramine-TCAS 127-65-1 | 127-65-1 | 0.2% | |
| 6 | POTASSIUM CHLORATE / SODIUM CHLORATECAS 3811-04-9 / 7775-09-9 | 3811-04-9 / 7775-09-9 | (a) 5% (b) 3% | |
| 8 | N-substituted derivatives of p- Phenylenediamine and their saltsN- substituted derivatives of o-Phenylenediamine (1 ), with exception of those derivatives listed elsewhere in this Annex and under reference numbers 1309, 1311, and 1312 in Annex II | — | Voir les conditions | |
| 8a | p-Phenylenediamine and its saltsCAS 106-50-3 / 624-18-0 / 16245-77-5 | 106-50-3 / 624-18-0 / 16245-77-5 | — | |
| 8b | p-Phenylenediaminep-Phenylenediamine HCl; p-Phenylenediamine SulphateCAS 106-50-3 / 624-18-0 / 16245-77-5 | 106-50-3 / 624-18-0 / 16245-77-5 | — | |
| 8c | N,N'-BIS(2-HYDROXYETHYL)-2-NITRO-P-PHENYLENEDIAMINECAS 84041-77-0 | 84041-77-0 | (b) As from 3 September 2017: 1,5 % | |
| 9 | Methylphenylenediamines, their N-substituted derivatives and their salts (1) with the exception of the substance under reference number 9a in this annex and substances under reference numbers 364, 1310 and 1313 in Annex II | — | Voir les conditions | |
| 9 | Methylphenylenediamines, their N- substituted derivatives and their salts (1), with the exception of the substance listed under reference numbers 9 a and 9 b of this Annex and the substances listed under reference numbers 364, 413, 1144, 1310, 1313 and 1507 of Annex II | — | — | |
| 9a | Toluene-2,5-diamine Toluene-2,5-diamine sulphateCAS 95-70-5 / 615-50-9 | 95-70-5 / 615-50-9 | — | |
| 9b | 2,6-DihydroxyethylaminotolueneCAS 149330-25-6 | 149330-25-6 | — | |
| 10 | Diaminophenols (1) | — | 10% (as free base) | |
| 11 | DICHLOROPHENCAS 97-23-4 | 97-23-4 | 0.5% | |
| 12 | HYDROGEN PEROXIDECAS 7722-84-1 | 7722-84-1 | Voir les conditions | |
| 14 | HYDROQUINONECAS 123-31-9 | 123-31-9 | 0.02% (after mixing for use) | CMR |
| 15a | POTASSIUM HYDROXIDE / SODIUM HYDROXIDECAS 1310-58-3 / 1310-73-2 | 1310-58-3 / 1310-73-2 | Voir les conditions | |
| 15b | LITHIUM HYDROXIDECAS 1310-65-2 | 1310-65-2 | (a) 1. 2% (6) 2. 4.5% (6) | |
| 15c | CALCIUM HYDROXIDECAS 1305-62-0 | 1305-62-0 | (a) 7% (as calcium hydroxide) | |
| 16 | 1-NAPHTHOLCAS 90-15-3 | 90-15-3 | — | |
| 16 | 1-NaphtholCAS 90-15-3 | 90-15-3 | — | |
| 17 | SODIUM NITRITECAS 7632-00-0 | 7632-00-0 | 0.2% | |
| 18 | NITROMETHANECAS 75-52-5 | 75-52-5 | 0.3% | |
| 21 | QUININECAS 130-95-0 | 130-95-0 | (a) 0.5% (as quinine base) (b) 0.2% (as quinine base) | |
| 22 | RESORCINOLCAS 108-46-3 | 108-46-3 | (c) 0,5% | |
| 23 | (a) Alkali sulphides (b) Alkaline earth sulphides | — | (a) 2% (as sulphur) (b) 6% (as sulphur) | |
| 24 | ZINC ACETATE / ZINC CHLORIDE / ZINC GLUCONATE / ZINC GLUTAMATE | — | 1% (as zinc) | |
| 25 | ZINC PHENOLSULFONATECAS 127-82-2 | 127-82-2 | 6% (as % of anhydrous substance) | |
| 26 | AMMONIUM MONOFLUOROPHOSPHATECAS 20859-38-5 -- 66115-19-3 | 20859-38-5 -- 66115-19-3 | 0,15 % | |
| 27 | Sodium monofluorophosphateCAS 10163-15-2 -- 7631-97-2 | 10163-15-2 -- 7631-97-2 | 0.15% | |
| 28 | Potassium monofluorophosphateCAS 14104-28-0 | 14104-28-0 | 0.15% | |
| 29 | Calcium monofluorophosphateCAS 7789-74-4 | 7789-74-4 | 0,15 % | |
| 30 | Calcium fluorideCAS 7789-75-5 | 7789-75-5 | 0.15% | |
| 31 | Sodium fluorideCAS 7681-49-4 | 7681-49-4 | 0,15 % | |
| 32 | POTASSIUM FLUORIDECAS 7789-23-3 | 7789-23-3 | 0,15 % | |
| 33 | AMMONIUM FLUORIDECAS 12125-01-8 | 12125-01-8 | 0,15 % | |
| 34 | ALUMINIUM FLUORIDECAS 7784-18-1 | 7784-18-1 | 0,15 % | |
| 35 | Stannous FluorideCAS 7783-47-3 | 7783-47-3 | 0,15 % | |
| 36 | Cetylamine HydrofluorideCAS 3151-59-5 | 3151-59-5 | 0,15 % | |
| 37 | 3-(N-Hexadecyl-N-2-hydroxyethylammonio) propylbis (2-hydroxyethyl) ammonium difluoride | — | 0,15 % | |
| 38 | N,N',N'-Tris(polyoxyethylene)-N-hexadecylpropylenediamine dihydrofluoride | — | 0,15 % | |
| 39 | OCTADECENYLAMMONIUM FLUORIDECAS 36505-83-6 | 36505-83-6 | 0,15 % | |
| 40 | SODIUM FLUOROSILICATECAS 16893-85-9 | 16893-85-9 | 0,15 % | |
| 41 | POTASSIUM FLUOROSILICATECAS 16871-90-2 | 16871-90-2 | 0,15 % | |
| 42 | Ammonium fluorosilicateCAS 16919-19-0 | 16919-19-0 | 0.15% | |
| 43 | MAGNESIUM FLUOROSILICATECAS 16949-65-8 | 16949-65-8 | 0,15 % | |
| 44 | DIMETHYLOL ETHYLENE THIOUREACAS 15534-95-9 | 15534-95-9 | (a) 2% (b) 2% | |
| 45 | BENZYL ALCOHOLCAS 100-51-6 | 100-51-6 | — |
Comment utiliser cette vue regroupée
L’annexe III énumère les substances autorisées uniquement dans des conditions définies. Cette vue regroupée est conçue pour trier rapidement 373 fiches de substances soumises à restrictions avant d’ouvrir l’entrée complète et de vérifier les limites de concentration, le champ d’application et les avertissements.
Ouvrez les fiches individuelles pour examiner l’ensemble des conditions, les limites de concentration, les avertissements d’étiquetage et les catégories de produits applicables.