Xylidines, their isomers, salts and halogenated and sulphonated derivatives
Xylidines, their isomers, salts and halogenated and sulphonated derivatives ist in Anhang II als verbotener Stoff für kosmetische Mittel aufgeführt, die in der EU in Verkehr gebracht werden.
Eintragsdetails
Chemische Bezeichnung
Xylidines, their isomers, salts and halogenated and sulphonated derivatives
Regulatorische Informationen
Kerndaten
Chemische Identität und Eigenschaften

Xylidine
Xylidines is a pale-yellow to brown liquid with a weak, aromatic, amine-like odor. (NIOSH, 2024) — CAMEO Chemicals
- IUPAC-Name
- 2,3-dimethylaniline;2,4-dimethylaniline;2,5-dimethylaniline;2,6-dimethylaniline;3,4-dimethylaniline;3,5-dimethylaniline
- Summenformel
- C48H66N6
- Molekulargewicht
- 727.1 g/mol
- Exakte Masse
- 726.53489613 Da
- Topologische polare Oberfläche
- 156,0 Ų
- Wasserstoffbrücken-Donoren
- 6
- Wasserstoffbrücken-Akzeptoren
- 6
- Kovalente Einheiten
- 6
- Definierte Stereozentren
- 0
Auch bekannt als
10 weitere gemeldete Namen
Belege aus weiteren wissenschaftlichen Datenbanken
NIH PubChem PUG-View
Attributed physical-property, hazard, environmental and use annotations.
- Autoignition Temperature: 520-590 °C Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
- Boiling Point: 415 to 439 °F at 760 mmHg (NIOSH, 2024) Quelle: CAMEO Chemicals
- Boiling Point: 213-226 °C Quelle: Hazardous Substances Data Bank (HSDB)
- Boiling Point: 216-228 °C Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
- Boiling Point: 415-439 °F Quelle: Occupational Safety and Health Administration (OSHA)
- Boiling Point: 415-439 °F Quelle: The National Institute for Occupational Safety and Health (NIOSH)
- Color/Form: Pale yellow to a brown liquid. Quelle: Hazardous Substances Data Bank (HSDB)
- Color/Form: All /isomers/ except ortho-4-xylidine are liquids above 20 °C. Quelle: Hazardous Substances Data Bank (HSDB)
- Color/Form: Pale-yellow to brown liquid. Quelle: Hazardous Substances Data Bank (HSDB)
- Density: 0.98 (NIOSH, 2024) - Less dense than water; will float Quelle: CAMEO Chemicals
- Density: 0.97-0.99 Quelle: Hazardous Substances Data Bank (HSDB)
- Density: Relative density (water = 1): 0.97-1.07 Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
- Density: 0.98 Quelle: Occupational Safety and Health Administration (OSHA)
- Density: .97-.99 no temp Quelle: PAC Chemical Database, U.S. Department of Energy
- Density: 0.98 Quelle: The National Institute for Occupational Safety and Health (NIOSH)
- Flash Point: 206 °F (2,3-) (NIOSH, 2024) Quelle: CAMEO Chemicals
- Flash Point: 206 °F Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Flash Point: 90-98 °C c.c. Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
- Flash Point: 206 °F (2,3-) Quelle: Occupational Safety and Health Administration (OSHA)
- Flash Point: 206 °F (2,3-) Quelle: The National Institute for Occupational Safety and Health (NIOSH)
- LogP: 1.8-2.2 (estimated) Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
- Melting Point: -33 °F (NIOSH, 2024) Quelle: CAMEO Chemicals
- Melting Point: -36 °C Quelle: Hazardous Substances Data Bank (HSDB)
- Melting Point: -33 °F Quelle: Occupational Safety and Health Administration (OSHA)
- Melting Point: -36 °C Quelle: PAC Chemical Database, U.S. Department of Energy
- Melting Point: -33 °F Quelle: The National Institute for Occupational Safety and Health (NIOSH)
- Odor: Weak aromatic amine odor Quelle: Hazardous Substances Data Bank (HSDB)
- Physical Description: Xylidines is a pale-yellow to brown liquid with a weak, aromatic, amine-like odor. (NIOSH, 2024) Quelle: CAMEO Chemicals
- Physical Description: Pale-yellow to brown liquid with a weak, aromatic, amine-like odor; [NIOSH] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Physical Description: PALE YELLOW-TO-BROWN LIQUID WITH CHARACTERISTIC ODOUR. TURNS BROWN ON EXPOSURE TO AIR. Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
- Physical Description: Pale-yellow to brown liquid with a weak, aromatic, amine-like odor. Quelle: Occupational Safety and Health Administration (OSHA)
- Physical Description: Pale-yellow to brown liquid with a weak, aromatic, amine-like odor. Quelle: The National Institute for Occupational Safety and Health (NIOSH)
- Solubility: Slight (NIOSH, 2024) Quelle: CAMEO Chemicals
- Solubility: Slightly sol in water; sol in alcohol Quelle: Hazardous Substances Data Bank (HSDB)
- Solubility: Sparingly soluble in water, soluble in alcohol. Quelle: Hazardous Substances Data Bank (HSDB)
- Solubility: Soluble in ether. Quelle: Hazardous Substances Data Bank (HSDB)
- Solubility: Solubility in water: poor Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
- Solubility: Slight Quelle: The National Institute for Occupational Safety and Health (NIOSH)
- Vapor Pressure: less than 1 mmHg (NIOSH, 2024) Quelle: CAMEO Chemicals
- Vapor Pressure: 0.13 [mmHg] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Vapor Pressure: Vapor pressure, Pa at 20 °C: Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
- Vapor Pressure: <1 mmHg Quelle: Occupational Safety and Health Administration (OSHA)
- Vapor Pressure: <1 mmHg Quelle: The National Institute for Occupational Safety and Health (NIOSH)
- Exposure Routes: The substance can be absorbed into the body in hazardous amounts by inhalation, through the skin and by ingestion. Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
- Exposure Routes: inhalation, skin absorption, ingestion, skin and/or eye contact Quelle: The National Institute for Occupational Safety and Health (NIOSH)
- First Aid: Excerpt from NIOSH Pocket Guide for Xylidine:; Eye: IRRIGATE IMMEDIATELY - If this chemical contacts the eyes, immediately wash (irrigate) the eyes with large amounts of water, occasionally lifting the lower and upper lids. Get medical attention immediately.; Skin: SOAP WASH IMMEDIATELY - If this chemical contacts the skin, immediately wash the contaminated skin with soap and water. If this chemical penetrates the clothing, immediately remove the clothing, wash the skin with soap and water, and get medical attention promptly.; Breathing: RESPIRATORY SUPPORT - If a person breathes large amounts of this chemical, move the exposed person to fresh air at once. If breathing has stopped, perform artificial respiration. Keep the affected person warm and at rest. Get medical attention as soon as possible.; Swallow: MEDICAL ATTENTION IMMEDIATELY - If this chemical has been swallowed, get medical attention immediately. (NIOSH, 2024) Quelle: CAMEO Chemicals
- ERG2024, Guide 153 (Xylidines, solid; Xylidines, liquid): General First Aid:; · Call 911 or emergency medical service.; · Ensure that medical personnel are aware of the material(s) involved, take precautions to protect themselves and avoid contamination.; · Move victim to fresh air if it can be done safely.; · Administer oxygen if breathing is difficult.; · If victim is not breathing:; -- DO NOT perform mouth-to-mouth resuscitation; the victim may have ingested or inhaled the substance.; -- If equipped and pulse detected, wash face and mouth, then give artificial respiration using a proper respiratory medical device (bag-valve mask, pocket mask equipped with a one-way valve or other device).; -- If no pulse detected or no respiratory medical device available, provide continuous compressions. Conduct a pulse check every two minutes or monitor for any signs of spontaneous respirations.; · Remove and isolate contaminated clothing and shoes.; · For minor skin contact, avoid spreading material on unaffected skin.; · In case of contact with substance, remove immediately by flushing skin or eyes with running water for at least 20 minutes.; · For severe burns, immediate medical attention is required.; · Effects of exposure (inhalation, ingestion, Quelle: Emergency Response Guidebook (ERG)
- First Aid: (General first aid procedures); Eye: Irrigate immediately - If this chemical contacts the eyes, immediately wash (irrigate) the eyes with large amounts of water, occasionally lifting the lower and upper lids. Get medical attention immediately.; Skin: Soap wash immediately - If this chemical contacts the skin, immediately wash the contaminated skin with soap and water. If this chemical penetrates the clothing, immediately remove the clothing, wash the skin with soap and water, and get medical attention promptly.; Breathing: Respiratory support; Swallow: Medical attention immediately - If this chemical has been swallowed, get medical attention immediately. Quelle: The National Institute for Occupational Safety and Health (NIOSH)
- Signal: Danger Quelle: European Chemicals Agency (ECHA)
- GHS Hazard Statements: H301+H311+H331 (21.3%): Toxic if swallowed, in contact with skin or if inhaled [Danger Acute toxicity, oral; acute toxicity, dermal; acute toxicity, inhalation]; H301+H311 (56.8%): Toxic if swallowed or in contact with skin [Danger Acute toxicity, oral; acute toxicity, dermal]; H301 (98.9%): Toxic if swallowed [Danger Acute toxicity, oral]; H311 (98.4%): Toxic in contact with skin [Danger Acute toxicity, dermal]; H315 (56.8%): Causes skin irritation [Warning Skin corrosion/irritation]; H319 (57.4%): Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H330 (57.9%): Fatal if inhaled [Danger Acute toxicity, inhalation]; H331 (41.5%): Toxic if inhaled [Danger Acute toxicity, inhalation]; H351 (57.9%): Suspected of causing cancer [Warning Carcinogenicity]; H373 (99.5%): May causes damage to organs through prolonged or repeated exposure [Warning Specific target organ toxicity, repeated exposure]; H411 (99.5%): Toxic to aquatic life with long lasting effects [Hazardous to the aquatic environment, long-term hazard] Quelle: European Chemicals Agency (ECHA)
- Precautionary Statement Codes: P203, P260, P261, P262, P264, P264+P265, P270, P271, P273, P280, P284, P301+P316, P302+P352, P304+P340, P305+P351+P338, P316, P318, P319, P320, P321, P330, P332+P317, P337+P317, P361+P364, P362+P364, P391, P403+P233, P405, and P501 (click each P-code to see the statement) Quelle: European Chemicals Agency (ECHA)
- ECHA C&L Notifications Summary: Aggregated GHS information provided per 183 reports by companies from 6 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Quelle: European Chemicals Agency (ECHA)
- Signal: Danger Quelle: NITE-CMC
- GHS Hazard Statements: H302: Harmful if swallowed [Warning Acute toxicity, oral]; H312: Harmful in contact with skin [Warning Acute toxicity, dermal]; H319: Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H330: Fatal if inhaled [Danger Acute toxicity, inhalation]; H336: May cause drowsiness or dizziness [Warning Specific target organ toxicity, single exposure; Narcotic effects]; H351: Suspected of causing cancer [Warning Carcinogenicity]; H371: May cause damage to organs [Warning Specific target organ toxicity, single exposure]; H373: May causes damage to organs through prolonged or repeated exposure [Warning Specific target organ toxicity, repeated exposure] Quelle: NITE-CMC
- Precautionary Statement Codes: P203, P260, P261, P264, P264+P265, P270, P271, P280, P284, P301+P317, P302+P352, P304+P340, P305+P351+P338, P308+P316, P316, P317, P318, P319, P320, P321, P330, P337+P317, P362+P364, P403+P233, P405, and P501 (click each P-code to see the statement) Quelle: NITE-CMC
- NFPA Health Rating: 3 - Materials that, under emergency conditions, can cause serious or permanent injury. Quelle: Hazardous Substances Data Bank (HSDB)
- NFPA Fire Rating: 1 - Materials that must be preheated before ignition can occur. Materials require considerable preheating, under all ambient temperature conditions, before ignition and combustion can occur. Quelle: Hazardous Substances Data Bank (HSDB)
- NFPA Instability Rating: 0 - Materials that in themselves are normally stable, even under fire conditions. Quelle: Hazardous Substances Data Bank (HSDB)
- Target Organs: respiratory system, blood, liver, kidneys, cardiovascular system Quelle: The National Institute for Occupational Safety and Health (NIOSH)
- Environmental Bioconcentration: Estimated(using structure estimation method and a recommended regression derived equation)(1,2) and measured BCF values for the six isomers of xylidine(SRC), ranged from <10 to 26. According to a classification scheme(3), these BCF values suggest that bioconcentration in aquatic organisms is low(SRC). Quelle: Hazardous Substances Data Bank (HSDB)
- Environmental Fate: TERRESTRIAL FATE: Based on a recommended classification scheme(1), estimated Koc values ranging from 52 to 240(SRC), determined from a structure estimation method(2), indicate that xylidine is expected to have high to medium mobility in soil(SRC). However, anilines are expected to bind strongly to humus or organic matter in soils due to the high reactivity of the aromatic amino group(3,4), suggesting that mobility may be much lower in some soils(SRC). Volatilization of xylidine may be important from moist soil surfaces(SRC) given an estimated Henry's Law constant of 2.5X10-6 atm-cu m/mole(SRC), using a fragment constant estimation method(5). Xylidine is not expected to volatilize from dry soil surfaces based on measured vapor pressures ranging from 0.028 to 0.15 mm Hg for the six isomers(SRC). Limited data suggest that xylidine may biodegrade in soil under aerobic conditions(SRC). Quelle: Hazardous Substances Data Bank (HSDB)
- Environmental Fate: AQUATIC FATE: Based on a recommended classification scheme(1), estimated Koc values ranging from 52 to 240(SRC) indicate that xylidine is not expected to adsorb to suspended solids and sediment in water(SRC). However, aromatic amine groups are recognized as having a strong affinity for organic carbon, suggesting that this compound may bind strongly to suspended organic material in water(2,3). Xylidine may volatilize from water surfaces(4,SRC) based on an estimated Henry's Law constant of 2.5X10-6 atm-cu m/mole(SRC), developed using a fragment constant estimation method(5). Estimated volatilization half-lives for a model river and model lake are 16 and 120 days, respectively(4,SRC). According to a classification scheme(5), estimated and measured BCF values for the six isomers(6,SRC), suggest that bioconcentration in aquatic organisms is low(SRC). Limited biodegradation data indicate that xylidine may be biodegraded under aerobic conditions in aquatic systems(SRC). Hydrolysis is not expected to occur due to lack of functional groups to hydrolyze(7,SRC). As a class, aromatic amines react relatively rapidly in sunlit natural water via reaction with photochemically produced hydroxyl rad Quelle: Hazardous Substances Data Bank (HSDB)
- Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), xylidine, which has vapor pressures ranging from 0.028 to 0.15 mm Hg at 25 °C for the six isomers(2,SRC), is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase xylidine is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is expected to be about 2.0 hours based on the estimated half-lives for the six isomers(3,SRC). Quelle: Hazardous Substances Data Bank (HSDB)
- Industry Uses: Dye Quelle: EPA Chemical Data Reporting (CDR)
- Sources/Uses: Used to produce dyes, drugs, and organic chemicals; [ACGIH] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Uses: As a gasoline additive Quelle: Hazardous Substances Data Bank (HSDB)
- Uses: Use in manufacture of curing agents, antioxidants, and antiozonants. Quelle: Hazardous Substances Data Bank (HSDB)
- Uses: Use in polymer production Quelle: Hazardous Substances Data Bank (HSDB)
- Uses: In organic synthesis in preparation of wood preservatives, wetting agents for textiles, frothing agents for ore dressing, special lacquers, and metal complexes. Quelle: Hazardous Substances Data Bank (HSDB)
- Uses: For more Uses (Complete) data for XYLIDINE (6 total), please visit the HSDB record page. Quelle: Hazardous Substances Data Bank (HSDB)
Zugeordnet durch: Existing checksum-valid CAS to unique PubChem CID match. Abgerufen: 2026-08-31. Quelleneintrag öffnen
Wissenschaftliche Klassifizierungen und Gefahrenannotationen liefern Kontext und ersetzen nicht die oben gezeigte marktspezifische regulatorische Entscheidung.
Weitere Quellenabdeckung und Trefferstatus
| Quelle | Ergebnis | Geprüft |
|---|---|---|
| NIH PubChem PUG-View | Exakter Treffer | 2026-08-31 |
Ein erfasster Nicht-Treffer ist ein nützlicher Beleg dafür, dass die Quelle geprüft wurde; er ist keine Behauptung, dass der Stoff anderswo nicht existiert.
Am 2026-09-02 von NIH PubChem durch prüfsummengültigen CAS-Abgleich abgerufen. Chemische Eigenschaften ersetzen nicht die regulatorische Entscheidung auf dieser Seite.
Verwandte Einträge zu Xylidines, their isomers, salts and halogenated and sulphonated derivatives
Für diesen Eintrag gibt es nur wenige direkte Treffer; daher werden auch nahe liegende Einträge aus Anhang II angezeigt.
Toluidines, their isomers, salts and halogenated and sulphonated derivatives
Imperatorin (9-(3-methylbut-2-enyloxy)furo[3,2-g]chromen-7-one)
4-Aminosalicylic acid and its salts
Ammi majus L. and its galenical preparations
1,3-Dimethylpentylamine and its salts
2-Amino-1,2-bis(4-methoxyphenyl)ethanol and its salts
Octodrine (INN) and its salts
Tuaminoheptane (INN), its isomers and salts
Distillates (coal tar), pitch, pyrene fraction
Was Anhang II für Xylidines, their isomers, salts and halogenated and sulphonated derivatives bedeutet
Xylidines, their isomers, salts and halogenated and sulphonated derivatives ist in Anhang II der EU-Kosmetikverordnung (EG) Nr. 1223/2009 als verbotener Stoff aufgeführt und darf nicht absichtlich zugesetzt werden. Artikel 17 regelt gesondert unbeabsichtigte geringe Mengen, die bei guter Herstellungspraxis technisch unvermeidbar und mit der Sicherheitsanforderung nach Artikel 3 vereinbar sind.
Rezepturentwickler müssen ihre Inhaltsstoffe und Rohstoffe prüfen, um sicherzustellen, dass keiner davon diesen Stoff enthält. Lieferanten sollten auf Anfrage eine Dokumentation vorlegen, die die Abwesenheit bestätigt.
Die Seite zeigt außerdem 12 verwandte Anhangseinträge mit überschneidenden Kennungen, Anhangslogik oder Namensmustern.
Compliance-Checkliste
- Prüfen Sie, dass dieser Stoff in allen Rohstoffen und fertigen Rezepturen nicht enthalten ist.
- Fordern Sie von Rohstofflieferanten eine Abwesenheitsbestätigung oder ein Analysenzertifikat an.
- Dokumentieren Sie das Prüfergebnis in der Produktinformationsdatei (PIF).
Häufig gestellte Fragen
Quellenhinweis zu Anhang II, Eintrag Xylidines, their isomers, salts and halogenated and sulphonated derivatives
Diese Seite fasst einen Eintrag aus Anhang II für Xylidines, their isomers, salts and halogenated and sulphonated derivatives aus öffentlichen Materialien der Europäischen Kommission zu kosmetischen Mitteln zusammen und ergänzt, soweit verfügbar, verknüpfte Treffer aus dem Verzeichnis oder bei Kennungen.
Nutzen Sie diese Eintragsseite, um die Bedingungen aus Anhang II für Xylidines, their isomers, salts and halogenated and sulphonated derivatives zu prüfen; bestätigen Sie jede endgültige regulatorische Entscheidung jedoch anhand des aktuellen amtlichen Anhangswortlauts und der Quelldateien.
Werkzeuge und nächste Schritte
Rezeptur prüfen
Fügen Sie eine vollständige INCI-Liste ein, um Xylidines, their isomers, salts and halogenated and sulphonated derivatives und andere markierte EU-Anhangseinträge in einem Durchgang zu finden.
INCI-CheckerEinträge vergleichen
Xylidines, their isomers, salts and halogenated and sulphonated derivatives nebeneinander mit einem anderen Anhangseintrag vergleichen, um Unterschiede bei Beschränkungen, Konzentrationen und Anhangszuordnung zu prüfen.
VergleichenDen Anhang durchsuchen
Alle Einträge in Anhang II ansehen und die regulatorischen Bedingungen der Stoffe in diesem Anhang vergleichen.
Anhang II öffnen