Aller au contenu principal
Annexe II Entrée 33 Modifiée 17 Oct 2010

Xylidines, their isomers, salts and halogenated and sulphonated derivatives

Xylidines, their isomers, salts and halogenated and sulphonated derivatives figure à l’annexe II en tant que substance interdite dans les produits cosmétiques mis sur le marché de l’UE.

Substance interdite— Annexe II, Règlement (CE) n° 1223/2009
Entrée: 33

Détails de la fiche

Nom chimique

Xylidines, their isomers, salts and halogenated and sulphonated derivatives

Informations réglementaires

Règlement

(EC) 2009/1223

Voir toutes les entrées fixées par cet acte

Données clés

Annexe
Numéro d’entrée
33

Identité et propriétés chimiques

Structure chimique 2D PubChem pour le CAS 1300-73-8
CAS 1300-73-8PubChem CID 56846457

Xylidine

Xylidines is a pale-yellow to brown liquid with a weak, aromatic, amine-like odor. (NIOSH, 2024) — CAMEO Chemicals

Nom IUPAC
2,3-dimethylaniline;2,4-dimethylaniline;2,5-dimethylaniline;2,6-dimethylaniline;3,4-dimethylaniline;3,5-dimethylaniline
Formule moléculaire
C48H66N6
Masse moléculaire
727.1 g/mol
Masse exacte
726.53489613 Da
Surface polaire topologique
156,0 Ų
Donneurs de liaisons hydrogène
6
Accepteurs de liaisons hydrogène
6
Unités covalentes
6
Stéréocentres définis
0

Également connu sous le nom de

aminoxyleneXilidineXylidinenXylidinesXylidine isomersAminodimethylbenzeneRefChem:53412UNII-0V872Q19HT
10 autres noms signalés
HSDB 64640V872Q19HTEINECS 215-091-4AI3-24178-X (USDA)Xylidine mixed ortho-meta-para isomersEC 215-091-4DimethylaminobenzeneXylidine (mixture)CDULGHZNHURECF-UHFFFAOYSA-NC48H66N6

Preuves issues de bases de données scientifiques complémentaires

NIH PubChem PUG-View
Correspondance exacte d’identifiant56846457

Attributed physical-property, hazard, environmental and use annotations.

  • First Aid: Excerpt from NIOSH Pocket Guide for Xylidine:; Eye: IRRIGATE IMMEDIATELY - If this chemical contacts the eyes, immediately wash (irrigate) the eyes with large amounts of water, occasionally lifting the lower and upper lids. Get medical attention immediately.; Skin: SOAP WASH IMMEDIATELY - If this chemical contacts the skin, immediately wash the contaminated skin with soap and water. If this chemical penetrates the clothing, immediately remove the clothing, wash the skin with soap and water, and get medical attention promptly.; Breathing: RESPIRATORY SUPPORT - If a person breathes large amounts of this chemical, move the exposed person to fresh air at once. If breathing has stopped, perform artificial respiration. Keep the affected person warm and at rest. Get medical attention as soon as possible.; Swallow: MEDICAL ATTENTION IMMEDIATELY - If this chemical has been swallowed, get medical attention immediately. (NIOSH, 2024) Source: CAMEO Chemicals
  • ERG2024, Guide 153 (Xylidines, solid; Xylidines, liquid): General First Aid:; · Call 911 or emergency medical service.; · Ensure that medical personnel are aware of the material(s) involved, take precautions to protect themselves and avoid contamination.; · Move victim to fresh air if it can be done safely.; · Administer oxygen if breathing is difficult.; · If victim is not breathing:; -- DO NOT perform mouth-to-mouth resuscitation; the victim may have ingested or inhaled the substance.; -- If equipped and pulse detected, wash face and mouth, then give artificial respiration using a proper respiratory medical device (bag-valve mask, pocket mask equipped with a one-way valve or other device).; -- If no pulse detected or no respiratory medical device available, provide continuous compressions. Conduct a pulse check every two minutes or monitor for any signs of spontaneous respirations.; · Remove and isolate contaminated clothing and shoes.; · For minor skin contact, avoid spreading material on unaffected skin.; · In case of contact with substance, remove immediately by flushing skin or eyes with running water for at least 20 minutes.; · For severe burns, immediate medical attention is required.; · Effects of exposure (inhalation, ingestion, Source: Emergency Response Guidebook (ERG)
  • First Aid: (General first aid procedures); Eye: Irrigate immediately - If this chemical contacts the eyes, immediately wash (irrigate) the eyes with large amounts of water, occasionally lifting the lower and upper lids. Get medical attention immediately.; Skin: Soap wash immediately - If this chemical contacts the skin, immediately wash the contaminated skin with soap and water. If this chemical penetrates the clothing, immediately remove the clothing, wash the skin with soap and water, and get medical attention promptly.; Breathing: Respiratory support; Swallow: Medical attention immediately - If this chemical has been swallowed, get medical attention immediately. Source: The National Institute for Occupational Safety and Health (NIOSH)
  • Signal: Danger Source: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H301+H311+H331 (21.3%): Toxic if swallowed, in contact with skin or if inhaled [Danger Acute toxicity, oral; acute toxicity, dermal; acute toxicity, inhalation]; H301+H311 (56.8%): Toxic if swallowed or in contact with skin [Danger Acute toxicity, oral; acute toxicity, dermal]; H301 (98.9%): Toxic if swallowed [Danger Acute toxicity, oral]; H311 (98.4%): Toxic in contact with skin [Danger Acute toxicity, dermal]; H315 (56.8%): Causes skin irritation [Warning Skin corrosion/irritation]; H319 (57.4%): Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H330 (57.9%): Fatal if inhaled [Danger Acute toxicity, inhalation]; H331 (41.5%): Toxic if inhaled [Danger Acute toxicity, inhalation]; H351 (57.9%): Suspected of causing cancer [Warning Carcinogenicity]; H373 (99.5%): May causes damage to organs through prolonged or repeated exposure [Warning Specific target organ toxicity, repeated exposure]; H411 (99.5%): Toxic to aquatic life with long lasting effects [Hazardous to the aquatic environment, long-term hazard] Source: European Chemicals Agency (ECHA)
  • Precautionary Statement Codes: P203, P260, P261, P262, P264, P264+P265, P270, P271, P273, P280, P284, P301+P316, P302+P352, P304+P340, P305+P351+P338, P316, P318, P319, P320, P321, P330, P332+P317, P337+P317, P361+P364, P362+P364, P391, P403+P233, P405, and P501 (click each P-code to see the statement) Source: European Chemicals Agency (ECHA)
  • ECHA C&L Notifications Summary: Aggregated GHS information provided per 183 reports by companies from 6 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Source: European Chemicals Agency (ECHA)
  • Signal: Danger Source: NITE-CMC
  • GHS Hazard Statements: H302: Harmful if swallowed [Warning Acute toxicity, oral]; H312: Harmful in contact with skin [Warning Acute toxicity, dermal]; H319: Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H330: Fatal if inhaled [Danger Acute toxicity, inhalation]; H336: May cause drowsiness or dizziness [Warning Specific target organ toxicity, single exposure; Narcotic effects]; H351: Suspected of causing cancer [Warning Carcinogenicity]; H371: May cause damage to organs [Warning Specific target organ toxicity, single exposure]; H373: May causes damage to organs through prolonged or repeated exposure [Warning Specific target organ toxicity, repeated exposure] Source: NITE-CMC
  • Precautionary Statement Codes: P203, P260, P261, P264, P264+P265, P270, P271, P280, P284, P301+P317, P302+P352, P304+P340, P305+P351+P338, P308+P316, P316, P317, P318, P319, P320, P321, P330, P337+P317, P362+P364, P403+P233, P405, and P501 (click each P-code to see the statement) Source: NITE-CMC
  • NFPA Health Rating: 3 - Materials that, under emergency conditions, can cause serious or permanent injury. Source: Hazardous Substances Data Bank (HSDB)
  • NFPA Fire Rating: 1 - Materials that must be preheated before ignition can occur. Materials require considerable preheating, under all ambient temperature conditions, before ignition and combustion can occur. Source: Hazardous Substances Data Bank (HSDB)
  • NFPA Instability Rating: 0 - Materials that in themselves are normally stable, even under fire conditions. Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Bioconcentration: Estimated(using structure estimation method and a recommended regression derived equation)(1,2) and measured BCF values for the six isomers of xylidine(SRC), ranged from <10 to 26. According to a classification scheme(3), these BCF values suggest that bioconcentration in aquatic organisms is low(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: TERRESTRIAL FATE: Based on a recommended classification scheme(1), estimated Koc values ranging from 52 to 240(SRC), determined from a structure estimation method(2), indicate that xylidine is expected to have high to medium mobility in soil(SRC). However, anilines are expected to bind strongly to humus or organic matter in soils due to the high reactivity of the aromatic amino group(3,4), suggesting that mobility may be much lower in some soils(SRC). Volatilization of xylidine may be important from moist soil surfaces(SRC) given an estimated Henry's Law constant of 2.5X10-6 atm-cu m/mole(SRC), using a fragment constant estimation method(5). Xylidine is not expected to volatilize from dry soil surfaces based on measured vapor pressures ranging from 0.028 to 0.15 mm Hg for the six isomers(SRC). Limited data suggest that xylidine may biodegrade in soil under aerobic conditions(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: AQUATIC FATE: Based on a recommended classification scheme(1), estimated Koc values ranging from 52 to 240(SRC) indicate that xylidine is not expected to adsorb to suspended solids and sediment in water(SRC). However, aromatic amine groups are recognized as having a strong affinity for organic carbon, suggesting that this compound may bind strongly to suspended organic material in water(2,3). Xylidine may volatilize from water surfaces(4,SRC) based on an estimated Henry's Law constant of 2.5X10-6 atm-cu m/mole(SRC), developed using a fragment constant estimation method(5). Estimated volatilization half-lives for a model river and model lake are 16 and 120 days, respectively(4,SRC). According to a classification scheme(5), estimated and measured BCF values for the six isomers(6,SRC), suggest that bioconcentration in aquatic organisms is low(SRC). Limited biodegradation data indicate that xylidine may be biodegraded under aerobic conditions in aquatic systems(SRC). Hydrolysis is not expected to occur due to lack of functional groups to hydrolyze(7,SRC). As a class, aromatic amines react relatively rapidly in sunlit natural water via reaction with photochemically produced hydroxyl rad Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), xylidine, which has vapor pressures ranging from 0.028 to 0.15 mm Hg at 25 °C for the six isomers(2,SRC), is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase xylidine is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is expected to be about 2.0 hours based on the estimated half-lives for the six isomers(3,SRC). Source: Hazardous Substances Data Bank (HSDB)

Mis en correspondance par: Existing checksum-valid CAS to unique PubChem CID match. Récupéré le: 2026-08-31. Ouvrir la fiche source

Les classifications scientifiques et les annotations de danger apportent du contexte et ne remplacent pas la décision réglementaire propre au marché indiquée ci-dessus.

Couverture des sources complémentaires et état des correspondances
SourceRésultatVérifié
NIH PubChem PUG-ViewCorrespondance exacte2026-08-31

Une absence de correspondance enregistrée est une preuve utile que la source a été vérifiée ; ce n’est pas l’affirmation que la substance n’existe pas ailleurs.

Récupéré depuis NIH PubChem le 2026-09-02 par correspondance CAS à somme de contrôle valide. Les propriétés chimiques ne remplacent pas la décision réglementaire de cette page.

Les correspondances directes sont limitées pour cette fiche ; des entrées voisines de l’annexe II sont donc également affichées.

Annexe II 38
Fiche voisine dans la même annexe

Anthracene oil

CAS: 120-12-7
EC: 204-371-1

Ce que signifie l’annexe II pour Xylidines, their isomers, salts and halogenated and sulphonated derivatives

Xylidines, their isomers, salts and halogenated and sulphonated derivatives figure comme substance interdite à l’annexe II du règlement (CE) n° 1223/2009 relatif aux produits cosmétiques et ne doit pas être ajouté intentionnellement. L’article 17 traite séparément des traces involontaires, techniquement inévitables dans le respect des bonnes pratiques de fabrication et compatibles avec l’exigence de sécurité de l’article 3.

Les formulateurs doivent contrôler leurs ingrédients et matières premières afin de s’assurer qu’aucun ne contient cette substance. Les fournisseurs doivent fournir, sur demande, une documentation confirmant son absence.

La page fait également apparaître 12 fiches d’annexe associées présentant des identifiants, une logique d’annexe ou des schémas de dénomination qui se recoupent.

Liste de contrôle de conformité

  • Vérifiez que cette substance est absente de toutes les matières premières et formulations finies.
  • Demandez aux fournisseurs de matières premières une attestation d’absence ou un certificat d’analyse.
  • Consignez le résultat du contrôle dans le dossier d’information produit (DIP).

Questions fréquentes

Oui. Xylidines, their isomers, salts and halogenated and sulphonated derivatives figure à l’annexe II du règlement (CE) n° 1223/2009 relatif aux produits cosmétiques et est interdit en tant qu’ingrédient cosmétique ajouté intentionnellement. L’article 17 prévoit une exception étroite pour les petites quantités involontaires techniquement inévitables dans le respect des bonnes pratiques de fabrication, à condition que le produit reste sûr au sens de l’article 3.

Le CAS 1300-73-8 est l’identifiant numérique unique attribué à Xylidines, their isomers, salts and halogenated and sulphonated derivatives par le Chemical Abstracts Service. Dans les travaux de conformité cosmétique, le numéro CAS sert à recouper la substance entre les bases de données réglementaires, les spécifications de matières premières et les rapports d’évaluation de la sécurité. Plusieurs entrées d’annexe de l’UE peuvent partager le même numéro CAS si la même substance apparaît dans des conditions différentes ou dans des annexes différentes.

Utilisez l’outil Vérificateur INCI de ce site pour coller votre liste complète d’ingrédients (INCI) et l’analyser par rapport à toutes les entrées des annexes II à VI. L’outil met en évidence les ingrédients correspondant à des fiches soumises à restrictions, interdites ou signalées comme allergènes. C’est utile pour un contrôle rapide de conformité des formules de produits finis ou des déclarations de matières premières.

Note de source pour la fiche Xylidines, their isomers, salts and halogenated and sulphonated derivatives de l’annexe II

Cette page résume une fiche de l’annexe II pour Xylidines, their isomers, salts and halogenated and sulphonated derivatives à partir de documents publics de la Commission européenne sur les cosmétiques et ajoute les correspondances d’inventaire ou d’identifiants associées lorsqu’elles sont disponibles.

Utilisez cette page de fiche pour examiner les conditions de l’annexe II pour Xylidines, their isomers, salts and halogenated and sulphonated derivatives, mais confirmez toute décision réglementaire finale auprès du libellé officiel en vigueur de l’annexe et des fichiers sources.

Outils et étapes suivantes

Vérifiez votre formule

Collez une liste INCI complète pour détecter Xylidines, their isomers, salts and halogenated and sulphonated derivatives et d’autres fiches d’annexe de l’UE signalées en une seule passe.

Vérificateur INCI

Comparer des entrées

Comparez Xylidines, their isomers, salts and halogenated and sulphonated derivatives côte à côte avec une autre fiche d’annexe pour examiner les différences de restrictions, de concentrations et d’annexe.

Comparer

Parcourir l’annexe

Consultez toutes les fiches de l’annexe II et comparez les conditions réglementaires entre les substances de cette annexe.

Ouvrir l’annexe II