AMMONIUM FLUORIDE
Ammonium fluoride
AMMONIUM FLUORIDE 列于附件 III,只能在本记录所示条件下使用。 本记录中的最大浓度:0,15 % calculated as F. When mixed with other fluorine compounds permitted under this Annex, total F concentration must not exceed 0,15 %。
记录详情
最大浓度
0,15 % calculated as F. When mixed with other fluorine compounds permitted under this Annex, total F concentration must not exceed 0,15 %
产品类型
警示语
Contains ammonium fluoride.
For any toothpaste with compounds containing fluorine in a concentration of 0,1 to 0,15 % calculated as F unless it is already labelled as contra-indicated for children (e.g. “for adult use only”) the following labelling is obligatory: “Children of 6 years and younger: use a pea-sized amount for supervised brushing to minimise swallowing. In case of intake of fluoride from other sources consult a dentist or doctor.”
INCI 词汇表名称
AMMONIUM FLUORIDE
化学名称
Ammonium fluoride
监管信息
SCCS 意见
- Opinion concerning the Safety of Fluorine Compounds in Oral Hygiene Products for Children under the Age of 6 years
- Opinion on the Safety of Fluorine Compounds in Oral Hygiene Products for Children under the Age of 6 Years
- Clarification on the Opinions SCCNFP/0653/03 and SCCP/0882/05 on the Safety of Fluorine Compounds in Oral Hygiene Products for Children under the Age of 6 Years
已识别的成分
关键数据
化学身份与性质

Ammonium fluoride
Ammonium fluoride is a fluoride salt having ammonium (NH4+) as the counterion. It is a fluoride salt and an ammonium salt. — ChEBI
- IUPAC 名称
- azanium fluoride
- 分子式
- FH4N
- 分子量
- 37.037 g/mol
- 精确质量
- 37.032777294 Da
- 拓扑极性表面积
- 1.0 Ų
- 氢键供体
- 1
- 氢键受体
- 1
- 共价单元
- 2
- 已定义的立体中心
- 0
又称
另有 16 个已报告名称
外部数据库标识符
- ChEBI:CHEBI:66871
- EPA DTXSID:DTXSID6050463
来自其他科学数据库的证据
NIH PubChem PUG-View
Attributed physical-property, hazard, environmental and use annotations.
- Boiling Point: 212 °F at 760 mmHg (USCG, 1999) 来源: CAMEO Chemicals
- Color/Form: Deliquescent leaflets or needles; hexagonal prisms by sublimation; occurs commercially as a granular powder 来源: Hazardous Substances Data Bank (HSDB)
- Color/Form: White hexagonal crystals 来源: Hazardous Substances Data Bank (HSDB)
- Density: 1.32 at 77 °F (USCG, 1999) - Denser than water; will sink 来源: CAMEO Chemicals
- Density: 1.015 来源: Hazardous Substances Data Bank (HSDB)
- Density: 1.01 g/cm³ 来源: ILO-WHO International Chemical Safety Cards (ICSCs)
- Density: 1.00925 @25 °C 来源: PAC Chemical Database, U.S. Department of Energy
- Melting Point: 238 °C 来源: Hazardous Substances Data Bank (HSDB)
- Melting Point: sublimes 来源: ILO-WHO International Chemical Safety Cards (ICSCs)
- Melting Point: 126 °C 来源: PAC Chemical Database, U.S. Department of Energy
- Odor: Odorless 来源: Hazardous Substances Data Bank (HSDB)
- Physical Description: Ammonium fluoride is a white crystalline solid. It is soluble in water. It is noncombustible. It is corrosive to aluminum. It is used in chemical analysis, in brewing, and as a preservative for wood. 来源: CAMEO Chemicals
- Physical Description: Liquid; Dry Powder; Large Crystals; CBI 来源: EPA Chemical Data Reporting (CDR)
- Physical Description: Colorless or white solid; [ICSC] Deliquescent; [Merck Index] White crystalline solid with an ammonia-like odor; [MSDSonline] 来源: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Physical Description: COLOURLESS CRYSTALS OR WHITE POWDER. 来源: ILO-WHO International Chemical Safety Cards (ICSCs)
- Solubility: 83.5 g/100 g water at 25 °C 来源: Hazardous Substances Data Bank (HSDB)
- Solubility: 100 g/100 mL of water at 0 °C 来源: Hazardous Substances Data Bank (HSDB)
- Solubility: 82.780 lb/100 lb of water at 70 °F 来源: Hazardous Substances Data Bank (HSDB)
- Solubility: 45.3 g/100 g water at 25 °C 来源: Hazardous Substances Data Bank (HSDB)
- Solubility: Slightly soluble in alcohol 来源: Hazardous Substances Data Bank (HSDB)
- Solubility: Solubility in water, g/100ml at 25 °C: 45.3 来源: ILO-WHO International Chemical Safety Cards (ICSCs)
- pH: The aqueous solution is acidic. 来源: Hazardous Substances Data Bank (HSDB)
- Exposure Routes: The substance can be absorbed into the body by inhalation of its aerosol and by ingestion. 来源: ILO-WHO International Chemical Safety Cards (ICSCs)
- First Aid: Begin first aid as quickly as possible.; INHALATION: remove to fresh air.; INGESTION: perform gastric lavage with limewater or 1% calcium chloride solution; support respiration; call a physician.; EYES: flush with water for 15 min.; consult physician.; SKIN: shower immediately with large quantities of water; remove all contaminated clothing in the shower at once; consult physician. (USCG, 1999) 来源: CAMEO Chemicals
- ERG2024, Guide 154 (Ammonium fluoride): General First Aid:; · Call 911 or emergency medical service.; · Ensure that medical personnel are aware of the material(s) involved, take precautions to protect themselves and avoid contamination.; · Move victim to fresh air if it can be done safely.; · Administer oxygen if breathing is difficult.; · If victim is not breathing:; -- DO NOT perform mouth-to-mouth resuscitation; the victim may have ingested or inhaled the substance.; -- If equipped and pulse detected, wash face and mouth, then give artificial respiration using a proper respiratory medical device (bag-valve mask, pocket mask equipped with a one-way valve or other device).; -- If no pulse detected or no respiratory medical device available, provide continuous compressions. Conduct a pulse check every two minutes or monitor for any signs of spontaneous respirations.; · Remove and isolate contaminated clothing and shoes.; · For minor skin contact, avoid spreading material on unaffected skin.; · In case of contact with substance, remove immediately by flushing skin or eyes with running water for at least 20 minutes.; · For severe burns, immediate medical attention is required.; · Effects of exposure (inhalation, ingestion, 来源: Emergency Response Guidebook (ERG)
- Signal: Danger 来源: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
- GHS Hazard Statements: H301: Toxic if swallowed [Danger Acute toxicity, oral]; H311: Toxic in contact with skin [Danger Acute toxicity, dermal]; H331: Toxic if inhaled [Danger Acute toxicity, inhalation] 来源: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
- Precautionary Statement Codes: P261, P262, P264, P270, P271, P280, P301+P316, P302+P352, P304+P340, P316, P321, P330, P361+P364, P403+P233, P405, and P501 (click each P-code to see the statement) 来源: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
- Signal: Danger 来源: European Chemicals Agency (ECHA)
- GHS Hazard Statements: H301 (100%): Toxic if swallowed [Danger Acute toxicity, oral]; H311 (98.7%): Toxic in contact with skin [Danger Acute toxicity, dermal]; H314 (14.7%): Causes severe skin burns and eye damage [Danger Skin corrosion/irritation]; H318 (16.7%): Causes serious eye damage [Danger Serious eye damage/eye irritation]; H331 (99.9%): Toxic if inhaled [Danger Acute toxicity, inhalation] 来源: European Chemicals Agency (ECHA)
- Precautionary Statement Codes: P260, P261, P262, P264, P264+P265, P270, P271, P280, P301+P316, P301+P330+P331, P302+P352, P302+P361+P354, P304+P340, P305+P354+P338, P316, P317, P321, P330, P361+P364, P363, P403+P233, P405, and P501 (click each P-code to see the statement) 来源: European Chemicals Agency (ECHA)
- ECHA C&L Notifications Summary: Aggregated GHS information provided per 3035 reports by companies from 19 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. 来源: European Chemicals Agency (ECHA)
- Signal: Danger 来源: NITE-CMC
- GHS Hazard Statements: H319: Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H372: Causes damage to organs through prolonged or repeated exposure [Danger Specific target organ toxicity, repeated exposure] 来源: NITE-CMC
- Precautionary Statement Codes: P260, P264, P264+P265, P270, P280, P305+P351+P338, P319, P337+P317, and P501 (click each P-code to see the statement) 来源: NITE-CMC
- Signal: Warning 来源: NITE-CMC
- GHS Hazard Statements: H335: May cause respiratory irritation [Warning Specific target organ toxicity, single exposure; Respiratory tract irritation]; H373: May causes damage to organs through prolonged or repeated exposure [Warning Specific target organ toxicity, repeated exposure] 来源: NITE-CMC
- NFPA Health Rating: 3 - Materials that, under emergency conditions, can cause serious or permanent injury. 来源: Hazardous Substances Data Bank (HSDB)
- NFPA Fire Rating: 0 - Materials that will not burn under typical fire conditions, including intrinsically noncombustible materials such as concrete, stone, and sand. 来源: Hazardous Substances Data Bank (HSDB)
- NFPA Instability Rating: 0 - Materials that in themselves are normally stable, even under fire conditions. 来源: Hazardous Substances Data Bank (HSDB)
- Consumer Uses: Plating agent; Etching agent 来源: EPA Chemical Data Reporting (CDR)
- Industry Uses: Semiconductor and photovoltaic agent; Processing aids not otherwise specified; Plating agent; Other; Intermediate; Etching agent; Surface modifier; Cleaning agent 来源: EPA Chemical Data Reporting (CDR)
- Sources/Uses: Used in etching and frosting glass; as antiseptic in brewing beer; for preserving wood; in printing and dyeing textiles; and as mothproofing agent; [HSDB] Used as a wet etchant in semiconductor manufacturing at a standard concentration of 40%; [CSH, p. 46] 来源: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Industrial Processes with risk of exposure: Semiconductor Manufacturing [Category: Industry]; Applying Wood Preservatives [Category: Other]; Using Disinfectants or Biocides [Category: Clean]; Textiles (Printing, Dyeing, or Finishing) [Category: Industry]; Glass Manufacturing [Category: Industry] 来源: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Uses: Etching and frosting glass, as antiseptic in brewing beer; preserving wood; in printing and dyeing textiles; as mothproofing agent 来源: Hazardous Substances Data Bank (HSDB)
- Uses: Fluorides; analytical chemistry 来源: Hazardous Substances Data Bank (HSDB)
- Uses: Ammonium fluoride is available principally as a laboratory reagent. If it is needed in large quantities, one mole of aqueous ammonia can be mixed with one mole of the more readily available ammonium bifluoride. 来源: Hazardous Substances Data Bank (HSDB)
映射方: Existing checksum-valid CAS to unique PubChem CID match. 检索时间: 2026-08-31. 打开来源记录
科学分类和危害注释仅提供背景信息,不能取代上方所示针对具体市场的监管决定。
其他来源的覆盖范围和匹配状态
| 来源 | 结果 | 已检查 |
|---|---|---|
| NIH PubChem PUG-View | 精确匹配 | 2026-08-31 |
已记录的无匹配结果是该来源已被检查的有效证据;这并不表示该物质在别处不存在。
于 2026-09-02 通过校验和有效的 CAS 匹配从美国国立卫生研究院 (NIH) PubChem 检索。化学性质不能取代本页的监管决定。
AMMONIUM FLUORIDE 的清单链接
2-ACRYLAMIDO-2-METHYLPROPANE SULFONIC ACID
AMMONIUM FLUORIDE 的相关记录
附件 III 对 AMMONIUM FLUORIDE 意味着什么
AMMONIUM FLUORIDE 是欧盟化妆品法规 1223/2009 附件 III 中的限用物质。其在化妆品中的使用仅限于上方条目所列的特定条件,包括适用的浓度限值、产品类型限制和必须标示的警示语。
在配方中使用该物质时,必须同时满足所有条件——最大浓度、产品范围和警示标签。满足其中一项条件并不能免除其他条件。
本记录与 3 个 CosIng 清单成分相关联,便于名称和标识符的交叉引用。 本页还显示 12 条相关附件记录,其标识符、附件逻辑或命名模式存在重叠。
合规核查清单
- 确保配方浓度不超过:0,15 % calculated as F. When mixed with other fluorine compounds permitted under this Annex, total F concentration must not exceed 0,15 %
- 确认产品类型相符:Oral products
- 在产品标签上标示所需的警示语。
- 将使用条件记录在产品信息档案 (PIF) 中。