AMMONIUM FLUORIDE
Ammonium fluoride
AMMONIUM FLUORIDE ist in Anhang III aufgeführt und darf nur unter den in diesem Eintrag genannten Bedingungen verwendet werden. Höchstkonzentration in diesem Eintrag: 0,15 % calculated as F. When mixed with other fluorine compounds permitted under this Annex, total F concentration must not exceed 0,15 %.
Eintragsdetails
Höchstkonzentration
0,15 % calculated as F. When mixed with other fluorine compounds permitted under this Annex, total F concentration must not exceed 0,15 %
Produktart
Warnhinweise
Contains ammonium fluoride.
For any toothpaste with compounds containing fluorine in a concentration of 0,1 to 0,15 % calculated as F unless it is already labelled as contra-indicated for children (e.g. “for adult use only”) the following labelling is obligatory: “Children of 6 years and younger: use a pea-sized amount for supervised brushing to minimise swallowing. In case of intake of fluoride from other sources consult a dentist or doctor.”
INCI-Glossarname
AMMONIUM FLUORIDE
Chemische Bezeichnung
Ammonium fluoride
Regulatorische Informationen
SCCS-Gutachten
- Opinion concerning the Safety of Fluorine Compounds in Oral Hygiene Products for Children under the Age of 6 years
- Opinion on the Safety of Fluorine Compounds in Oral Hygiene Products for Children under the Age of 6 Years
- Clarification on the Opinions SCCNFP/0653/03 and SCCP/0882/05 on the Safety of Fluorine Compounds in Oral Hygiene Products for Children under the Age of 6 Years
Identifizierte Inhaltsstoffe
Kerndaten
Chemische Identität und Eigenschaften

Ammonium fluoride
Ammonium fluoride is a fluoride salt having ammonium (NH4+) as the counterion. It is a fluoride salt and an ammonium salt. — ChEBI
- IUPAC-Name
- azanium fluoride
- Summenformel
- FH4N
- Molekulargewicht
- 37.037 g/mol
- Exakte Masse
- 37.032777294 Da
- Topologische polare Oberfläche
- 1,0 Ų
- Wasserstoffbrücken-Donoren
- 1
- Wasserstoffbrücken-Akzeptoren
- 1
- Kovalente Einheiten
- 2
- Definierte Stereozentren
- 0
Auch bekannt als
16 weitere gemeldete Namen
Kennungen in externen Datenbanken
- ChEBI:CHEBI:66871
- EPA DTXSID:DTXSID6050463
Belege aus weiteren wissenschaftlichen Datenbanken
NIH PubChem PUG-View
Attributed physical-property, hazard, environmental and use annotations.
- Boiling Point: 212 °F at 760 mmHg (USCG, 1999) Quelle: CAMEO Chemicals
- Color/Form: Deliquescent leaflets or needles; hexagonal prisms by sublimation; occurs commercially as a granular powder Quelle: Hazardous Substances Data Bank (HSDB)
- Color/Form: White hexagonal crystals Quelle: Hazardous Substances Data Bank (HSDB)
- Density: 1.32 at 77 °F (USCG, 1999) - Denser than water; will sink Quelle: CAMEO Chemicals
- Density: 1.015 Quelle: Hazardous Substances Data Bank (HSDB)
- Density: 1.01 g/cm³ Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
- Density: 1.00925 @25 °C Quelle: PAC Chemical Database, U.S. Department of Energy
- Melting Point: 238 °C Quelle: Hazardous Substances Data Bank (HSDB)
- Melting Point: sublimes Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
- Melting Point: 126 °C Quelle: PAC Chemical Database, U.S. Department of Energy
- Odor: Odorless Quelle: Hazardous Substances Data Bank (HSDB)
- Physical Description: Ammonium fluoride is a white crystalline solid. It is soluble in water. It is noncombustible. It is corrosive to aluminum. It is used in chemical analysis, in brewing, and as a preservative for wood. Quelle: CAMEO Chemicals
- Physical Description: Liquid; Dry Powder; Large Crystals; CBI Quelle: EPA Chemical Data Reporting (CDR)
- Physical Description: Colorless or white solid; [ICSC] Deliquescent; [Merck Index] White crystalline solid with an ammonia-like odor; [MSDSonline] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Physical Description: COLOURLESS CRYSTALS OR WHITE POWDER. Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
- Solubility: 83.5 g/100 g water at 25 °C Quelle: Hazardous Substances Data Bank (HSDB)
- Solubility: 100 g/100 mL of water at 0 °C Quelle: Hazardous Substances Data Bank (HSDB)
- Solubility: 82.780 lb/100 lb of water at 70 °F Quelle: Hazardous Substances Data Bank (HSDB)
- Solubility: 45.3 g/100 g water at 25 °C Quelle: Hazardous Substances Data Bank (HSDB)
- Solubility: Slightly soluble in alcohol Quelle: Hazardous Substances Data Bank (HSDB)
- Solubility: Solubility in water, g/100ml at 25 °C: 45.3 Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
- pH: The aqueous solution is acidic. Quelle: Hazardous Substances Data Bank (HSDB)
- Exposure Routes: The substance can be absorbed into the body by inhalation of its aerosol and by ingestion. Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
- First Aid: Begin first aid as quickly as possible.; INHALATION: remove to fresh air.; INGESTION: perform gastric lavage with limewater or 1% calcium chloride solution; support respiration; call a physician.; EYES: flush with water for 15 min.; consult physician.; SKIN: shower immediately with large quantities of water; remove all contaminated clothing in the shower at once; consult physician. (USCG, 1999) Quelle: CAMEO Chemicals
- ERG2024, Guide 154 (Ammonium fluoride): General First Aid:; · Call 911 or emergency medical service.; · Ensure that medical personnel are aware of the material(s) involved, take precautions to protect themselves and avoid contamination.; · Move victim to fresh air if it can be done safely.; · Administer oxygen if breathing is difficult.; · If victim is not breathing:; -- DO NOT perform mouth-to-mouth resuscitation; the victim may have ingested or inhaled the substance.; -- If equipped and pulse detected, wash face and mouth, then give artificial respiration using a proper respiratory medical device (bag-valve mask, pocket mask equipped with a one-way valve or other device).; -- If no pulse detected or no respiratory medical device available, provide continuous compressions. Conduct a pulse check every two minutes or monitor for any signs of spontaneous respirations.; · Remove and isolate contaminated clothing and shoes.; · For minor skin contact, avoid spreading material on unaffected skin.; · In case of contact with substance, remove immediately by flushing skin or eyes with running water for at least 20 minutes.; · For severe burns, immediate medical attention is required.; · Effects of exposure (inhalation, ingestion, Quelle: Emergency Response Guidebook (ERG)
- Signal: Danger Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
- GHS Hazard Statements: H301: Toxic if swallowed [Danger Acute toxicity, oral]; H311: Toxic in contact with skin [Danger Acute toxicity, dermal]; H331: Toxic if inhaled [Danger Acute toxicity, inhalation] Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
- Precautionary Statement Codes: P261, P262, P264, P270, P271, P280, P301+P316, P302+P352, P304+P340, P316, P321, P330, P361+P364, P403+P233, P405, and P501 (click each P-code to see the statement) Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
- Signal: Danger Quelle: European Chemicals Agency (ECHA)
- GHS Hazard Statements: H301 (100%): Toxic if swallowed [Danger Acute toxicity, oral]; H311 (98.7%): Toxic in contact with skin [Danger Acute toxicity, dermal]; H314 (14.7%): Causes severe skin burns and eye damage [Danger Skin corrosion/irritation]; H318 (16.7%): Causes serious eye damage [Danger Serious eye damage/eye irritation]; H331 (99.9%): Toxic if inhaled [Danger Acute toxicity, inhalation] Quelle: European Chemicals Agency (ECHA)
- Precautionary Statement Codes: P260, P261, P262, P264, P264+P265, P270, P271, P280, P301+P316, P301+P330+P331, P302+P352, P302+P361+P354, P304+P340, P305+P354+P338, P316, P317, P321, P330, P361+P364, P363, P403+P233, P405, and P501 (click each P-code to see the statement) Quelle: European Chemicals Agency (ECHA)
- ECHA C&L Notifications Summary: Aggregated GHS information provided per 3035 reports by companies from 19 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Quelle: European Chemicals Agency (ECHA)
- Signal: Danger Quelle: NITE-CMC
- GHS Hazard Statements: H319: Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H372: Causes damage to organs through prolonged or repeated exposure [Danger Specific target organ toxicity, repeated exposure] Quelle: NITE-CMC
- Precautionary Statement Codes: P260, P264, P264+P265, P270, P280, P305+P351+P338, P319, P337+P317, and P501 (click each P-code to see the statement) Quelle: NITE-CMC
- Signal: Warning Quelle: NITE-CMC
- GHS Hazard Statements: H335: May cause respiratory irritation [Warning Specific target organ toxicity, single exposure; Respiratory tract irritation]; H373: May causes damage to organs through prolonged or repeated exposure [Warning Specific target organ toxicity, repeated exposure] Quelle: NITE-CMC
- NFPA Health Rating: 3 - Materials that, under emergency conditions, can cause serious or permanent injury. Quelle: Hazardous Substances Data Bank (HSDB)
- NFPA Fire Rating: 0 - Materials that will not burn under typical fire conditions, including intrinsically noncombustible materials such as concrete, stone, and sand. Quelle: Hazardous Substances Data Bank (HSDB)
- NFPA Instability Rating: 0 - Materials that in themselves are normally stable, even under fire conditions. Quelle: Hazardous Substances Data Bank (HSDB)
- Consumer Uses: Plating agent; Etching agent Quelle: EPA Chemical Data Reporting (CDR)
- Industry Uses: Semiconductor and photovoltaic agent; Processing aids not otherwise specified; Plating agent; Other; Intermediate; Etching agent; Surface modifier; Cleaning agent Quelle: EPA Chemical Data Reporting (CDR)
- Sources/Uses: Used in etching and frosting glass; as antiseptic in brewing beer; for preserving wood; in printing and dyeing textiles; and as mothproofing agent; [HSDB] Used as a wet etchant in semiconductor manufacturing at a standard concentration of 40%; [CSH, p. 46] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Industrial Processes with risk of exposure: Semiconductor Manufacturing [Category: Industry]; Applying Wood Preservatives [Category: Other]; Using Disinfectants or Biocides [Category: Clean]; Textiles (Printing, Dyeing, or Finishing) [Category: Industry]; Glass Manufacturing [Category: Industry] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Uses: Etching and frosting glass, as antiseptic in brewing beer; preserving wood; in printing and dyeing textiles; as mothproofing agent Quelle: Hazardous Substances Data Bank (HSDB)
- Uses: Fluorides; analytical chemistry Quelle: Hazardous Substances Data Bank (HSDB)
- Uses: Ammonium fluoride is available principally as a laboratory reagent. If it is needed in large quantities, one mole of aqueous ammonia can be mixed with one mole of the more readily available ammonium bifluoride. Quelle: Hazardous Substances Data Bank (HSDB)
Zugeordnet durch: Existing checksum-valid CAS to unique PubChem CID match. Abgerufen: 2026-08-31. Quelleneintrag öffnen
Wissenschaftliche Klassifizierungen und Gefahrenannotationen liefern Kontext und ersetzen nicht die oben gezeigte marktspezifische regulatorische Entscheidung.
Weitere Quellenabdeckung und Trefferstatus
| Quelle | Ergebnis | Geprüft |
|---|---|---|
| NIH PubChem PUG-View | Exakter Treffer | 2026-08-31 |
Ein erfasster Nicht-Treffer ist ein nützlicher Beleg dafür, dass die Quelle geprüft wurde; er ist keine Behauptung, dass der Stoff anderswo nicht existiert.
Am 2026-09-02 von NIH PubChem durch prüfsummengültigen CAS-Abgleich abgerufen. Chemische Eigenschaften ersetzen nicht die regulatorische Entscheidung auf dieser Seite.
Verzeichnisverknüpfungen für AMMONIUM FLUORIDE
2-ACRYLAMIDO-2-METHYLPROPANE SULFONIC ACID
Verwandte Einträge zu AMMONIUM FLUORIDE
AMMONIUM MONOFLUOROPHOSPHATE
Sodium monofluorophosphate
3-(N-Hexadecyl-N-2-hydroxyethylammonio) propylbis (2-hydroxyethyl) ammonium difluoride
N,N',N'-Tris(polyoxyethylene)-N-hexadecylpropylenediamine dihydrofluoride
Was Anhang III für AMMONIUM FLUORIDE bedeutet
AMMONIUM FLUORIDE ist ein beschränkter Stoff nach Anhang III der EU-Kosmetikverordnung (EG) Nr. 1223/2009. Seine Verwendung in kosmetischen Mitteln ist nur unter den im obigen Eintrag genannten besonderen Bedingungen zulässig, einschließlich geltender Konzentrationsgrenzen, Beschränkungen der Produktart und erforderlicher Warnhinweise.
Wird dieser Stoff in einer Rezeptur verwendet, müssen alle Bedingungen – Höchstkonzentration, Produktbereich und Warnhinweise – gleichzeitig erfüllt sein. Die Einhaltung einer Bedingung hebt die anderen nicht auf.
Dieser Eintrag ist zum Abgleich von Namen und Kennungen mit 3 Inhaltsstoffen des CosIng-Verzeichnisses verknüpft. Die Seite zeigt außerdem 12 verwandte Anhangseinträge mit überschneidenden Kennungen, Anhangslogik oder Namensmustern.
Compliance-Checkliste
- Stellen Sie sicher, dass die Konzentration in der Rezeptur nicht überschreitet: 0,15 % calculated as F. When mixed with other fluorine compounds permitted under this Annex, total F concentration must not exceed 0,15 %
- Prüfen Sie die Vereinbarkeit mit der Produktart: Oral products
- Geben Sie den erforderlichen Warnhinweis auf dem Produktetikett an.
- Dokumentieren Sie die Verwendungsbedingungen in der Produktinformationsdatei (PIF).
Häufig gestellte Fragen
Quellenhinweis zu Anhang III, Eintrag AMMONIUM FLUORIDE
Diese Seite fasst einen Eintrag aus Anhang III für AMMONIUM FLUORIDE aus öffentlichen Materialien der Europäischen Kommission zu kosmetischen Mitteln zusammen und ergänzt, soweit verfügbar, verknüpfte Treffer aus dem Verzeichnis oder bei Kennungen.
Nutzen Sie diese Eintragsseite, um die Bedingungen aus Anhang III für AMMONIUM FLUORIDE zu prüfen; bestätigen Sie jede endgültige regulatorische Entscheidung jedoch anhand des aktuellen amtlichen Anhangswortlauts und der Quelldateien.
Werkzeuge und nächste Schritte
Rezeptur prüfen
Fügen Sie eine vollständige INCI-Liste ein, um AMMONIUM FLUORIDE und andere markierte EU-Anhangseinträge in einem Durchgang zu finden.
INCI-CheckerEinträge vergleichen
AMMONIUM FLUORIDE nebeneinander mit einem anderen Anhangseintrag vergleichen, um Unterschiede bei Beschränkungen, Konzentrationen und Anhangszuordnung zu prüfen.
VergleichenDen Anhang durchsuchen
Alle Einträge in Anhang III ansehen und die regulatorischen Bedingungen der Stoffe in diesem Anhang vergleichen.
Anhang III öffnen