Aller au contenu principal
ProhibitedBinding ruleASEANOriginal is EnglishImport de la source officielle contrôlé

Styrene

ASEAN Annex II lists this record among substances prohibited in cosmetic products. Member-state transition rules and deviations still require local verification.

Décision réglementaire et conditions complètes

Statut
Prohibited
Rôle juridique
Binding rule
Résumé réglementaire
ASEAN Annex II lists this record among substances prohibited in cosmetic products. Member-state transition rules and deviations still require local verification.
Conditions et restrictions
A prohibition entry may contain no separate condition text because the regulatory outcome is the prohibition itself. Ouvrez la source citée et appliquez les exigences applicables à l’ensemble du marché ci-dessous.

Identité de la substance

Nom dans la source officielle
Styrene
CAS
100-42-5
EC
202-851-5
Correspondance d’identité
cas_number
Ingrédient associé
STYRENE

Données d’identité CosIng associées

Noms et alias

STYRENE

Description CosIng : Ethenyl-benzene; Vinylbenzene; Phenylethylene; Styrol; Styrolene; Cinnamene

Note de restriction de l’inventaire de l’UE : II/1575

Fonction cosmétique enregistrée : SOLVENT

Pages de fonctions :SOLVENT

Voir le profil complet de l’ingrédient

Aperçu multi-marchés pour cette identité

Fiches exactes associées actuellement présentes sur ce site. L’absence d’un marché signifie qu’aucune correspondance exacte n’a été importée, et non une autorisation d’utiliser la substance.

6 jeux de données de marchés
Structure chimique 2D PubChem pour le CAS 100-42-5
CAS 100-42-5PubChem CID 7501

Chimie vérifiée pour le CAS 100-42-5

Styrene

Styrene is a vinylarene that is benzene carrying a vinyl group. It has been isolated from the benzoin resin produced by Styrax species. It has a role as a mutagen, a mouse metabolite and a plant metabolite. It is a volatile organic compound, a member of styrenes and a vinylarene. — ChEBI

Nom IUPAC
styrene
Formule moléculaire
C8H8
Masse moléculaire
104.15 g/mol
Masse exacte
104.062600255 Da
Masse monoisotopique
104.062600255 Da
XLogP3
2,9
Surface polaire topologique
0,0 Ų
Complexité moléculaire
68,0
Charge formelle
0
Donneurs de liaisons hydrogène
0
Accepteurs de liaisons hydrogène
0
Liaisons rotatives
1
Atomes lourds
8
Unités covalentes
1

Noms et synonymes signalés à PubChem

EthenylbenzenePhenylethyleneVinylbenzeneStyrolCinnameneStyrene monomerBenzene, ethenyl-Phenylethene
16 autres noms signalés
StyrolenePhenethyleneVinylbenzolStyroleVinyl benzeneStyropol SOCinnamolStyrenBenzene, vinyl-CinnamenolEthylene, phenyl-VinylbenzenStiroloStyreenVinyl-benzeneNCI-C02200
Identifiants de bases de données externes
Statistiques de structure avancées
Stéréocentres atomiques définis
0
Stéréocentres atomiques non définis
0
Stéréocentres de liaison définis
0
Stéréocentres de liaison non définis
0
Caractéristiques pharmacophoriques 3D
2
Cycles 3D
1
Groupes hydrophobes 3D
1
Caractéristiques d’accepteur 3D
0
Caractéristiques de donneur 3D
0
Centres anioniques 3D
0
Centres cationiques 3D
0
Conformères 3D
1
Rotors 3D effectifs
1,0
Identifiants de structure lisibles par machine
SMILES
C=CC1=CC=CC=C1
InChI
InChI=1S/C8H8/c1-2-8-6-4-3-5-7-8/h2-7H,1H2
InChIKey
PPBRXRYQALVLMV-UHFFFAOYSA-N

Preuves issues de bases de données scientifiques complémentaires

EMBL-EBI ChEBI
Correspondance exacte d’identifiantCHEBI:27452

styrene

A vinylarene that is benzene carrying a vinyl group. It has been isolated from the benzoin resin produced by Styrax species.

Formule
C8H8
Masse moyenne
104.152 g/mol
Masse monoisotopique
104.06260 Da
Charge formelle
0
  • styrenes — is a (CHEBI:26799)
  • vinylarene — is a (CHEBI:51324)
  • volatile organic compound — is a (CHEBI:134179)
  • mutagen — has role (CHEBI:25435)
  • plant metabolite — has role (CHEBI:76924)
  • mouse metabolite — has role (CHEBI:75771)
  • mutagen — has role (CHEBI:25435)
  • plant metabolite — has role (CHEBI:76924)
  • mouse metabolite — has role (CHEBI:75771)
  • styrenes — is a (CHEBI:26799)
  • vinylarene — is a (CHEBI:51324)
  • volatile organic compound — is a (CHEBI:134179)
Noms supplémentaires validés
styreneethenylbenzenephenylethenePhenylethyleneStyrenStyreneStyrolvinylbenzene
Références croisées de cette source
  • CAS: 100-42-5 — NIST Chemistry WebBook
  • CAS: 100-42-5 — KEGG COMPOUND
  • CAS: 100-42-5 — ChemIDplus
  • REGISTRY_NUMBER: 1071236 — Reaxys
  • REGISTRY_NUMBER: 2991 — Gmelin
  • MANUAL_X_REF: c0115 — UM-BBD
  • MANUAL_X_REF: C07083 — KEGG COMPOUND
  • MANUAL_X_REF: C07083 — KEGG COMPOUND
  • MANUAL_X_REF: CPD-1092 — MetaCyc
  • MANUAL_X_REF: HMDB0034240 — HMDB
  • MANUAL_X_REF: Styrene — Wikipedia

Mis en correspondance par: Exact CAS cross-reference in the ChEBI compound record. Source mise à jour le: 2021-03-05. Récupéré le: 2026-08-31. Ouvrir la fiche source

NIH PubChem PUG-View
Correspondance exacte d’identifiant7501

Attributed physical-property, hazard, environmental and use annotations.

  • First Aid: EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.; SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. IMMEDIATELY call a hospital or poison control center even if no symptoms (such as redness or irritation) develop. IMMEDIATELY transport the victim to a hospital for treatment after washing the affected areas.; INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. IMMEDIATELY call a physician and be prepared to transport the victim to a hospital even if no symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop. Provide proper respiratory protection to rescuers entering an unknow Source: CAMEO Chemicals
  • ERG2024, Guide 128P (Styrene monomer, stabilized): General First Aid:; · Call 911 or emergency medical service.; · Ensure that medical personnel are aware of the material(s) involved, take precautions to protect themselves and avoid contamination.; · Move victim to fresh air if it can be done safely.; · Administer oxygen if breathing is difficult.; · If victim is not breathing:; -- DO NOT perform mouth-to-mouth resuscitation; the victim may have ingested or inhaled the substance.; -- If equipped and pulse detected, wash face and mouth, then give artificial respiration using a proper respiratory medical device (bag-valve mask, pocket mask equipped with a one-way valve or other device).; -- If no pulse detected or no respiratory medical device available, provide continuous compressions. Conduct a pulse check every two minutes or monitor for any signs of spontaneous respirations.; · Remove and isolate contaminated clothing and shoes.; · For minor skin contact, avoid spreading material on unaffected skin.; · In case of contact with substance, remove immediately by flushing skin or eyes with running water for at least 20 minutes.; · For severe burns, immediate medical attention is required.; · Effects of exposure (inhalation, ingestion, Source: Emergency Response Guidebook (ERG)
  • First Aid: (General first aid procedures); Eye: Irrigate immediately - If this chemical contacts the eyes, immediately wash (irrigate) the eyes with large amounts of water, occasionally lifting the lower and upper lids. Get medical attention immediately.; Skin: Water flush - If this chemical contacts the skin, flush the contaminated skin with water. Where there is evidence of skin irritation, get medical attention.; Breathing: Respiratory support; Swallow: Medical attention immediately - If this chemical has been swallowed, get medical attention immediately. Source: The National Institute for Occupational Safety and Health (NIOSH)
  • Signal: Danger Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • GHS Hazard Statements: H226: Flammable liquid and vapor [Warning Flammable liquids]; H315: Causes skin irritation [Warning Skin corrosion/irritation]; H319: Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H332: Harmful if inhaled [Warning Acute toxicity, inhalation]; H361d: Suspected of damaging the unborn child [Warning Reproductive toxicity]; H372: Causes damage to organs through prolonged or repeated exposure [Danger Specific target organ toxicity, repeated exposure] Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Precautionary Statement Codes: P203, P210, P233, P240, P241, P242, P243, P260, P261, P264, P264+P265, P270, P271, P280, P302+P352, P303+P361+P353, P304+P340, P305+P351+P338, P317, P318, P319, P321, P332+P317, P337+P317, P362+P364, P370+P378, P403+P235, P405, and P501 (click each P-code to see the statement) Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Note: This chemical does not meet GHS hazard criteria for < 0.1% (3 of 6114) of reports. Source: European Chemicals Agency (ECHA)
  • Signal: Danger Source: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H226 (> 99.9%): Flammable liquid and vapor [Warning Flammable liquids]; H304 (50.6%): May be fatal if swallowed and enters airways [Danger Aspiration hazard]; H315 (> 99.9%): Causes skin irritation [Warning Skin corrosion/irritation]; H319 (99.9%): Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H332 (98%): Harmful if inhaled [Warning Acute toxicity, inhalation]; H335 (52%): May cause respiratory irritation [Warning Specific target organ toxicity, single exposure; Respiratory tract irritation]; H361 (35.1%): Suspected of damaging fertility or the unborn child [Warning Reproductive toxicity]; H372 (73.8%): Causes damage to organs through prolonged or repeated exposure [Danger Specific target organ toxicity, repeated exposure]; H412 (49%): Harmful to aquatic life with long lasting effects [Hazardous to the aquatic environment, long-term hazard] Source: European Chemicals Agency (ECHA)
  • Precautionary Statement Codes: P203, P210, P233, P240, P241, P242, P243, P260, P261, P264, P264+P265, P270, P271, P273, P280, P301+P316, P302+P352, P303+P361+P353, P304+P340, P305+P351+P338, P317, P318, P319, P321, P331, P332+P317, P337+P317, P362+P364, P370+P378, P403+P233, P403+P235, P405, and P501 (click each P-code to see the statement) Source: European Chemicals Agency (ECHA)
  • ECHA C&L Notifications Summary: Aggregated GHS information provided per 6114 reports by companies from 92 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Reported as not meeting GHS hazard criteria per 3 of 6114 reports by companies.; There are 91 notifications provided by 6111 of 6114 reports by companies with hazard statement code(s).; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Source: European Chemicals Agency (ECHA)
  • Signal: Warning Source: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H226 (100%): Flammable liquid and vapor [Warning Flammable liquids]; H315 (100%): Causes skin irritation [Warning Skin corrosion/irritation]; H319 (100%): Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H332 (100%): Harmful if inhaled [Warning Acute toxicity, inhalation] Source: European Chemicals Agency (ECHA)
  • Precautionary Statement Codes: P210, P233, P240, P241, P242, P243, P261, P264, P264+P265, P271, P280, P302+P352, P303+P361+P353, P304+P340, P305+P351+P338, P317, P321, P332+P317, P337+P317, P362+P364, P370+P378, P403+P235, and P501 (click each P-code to see the statement) Source: European Chemicals Agency (ECHA)
  • ECHA C&L Notifications Summary: Aggregated GHS information provided per 39 reports by companies from 2 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Source: European Chemicals Agency (ECHA)
  • Health Effects: Styrene causes nervous system depression and may be carcinogenic. Animals studies have also shown that hearing loss and liver damage may occur. (L1831, L1832) Source: Toxin and Toxin Target Database (T3DB)
  • NFPA Health Rating: 2 - Materials that, under emergency conditions, can cause temporary incapacitation or residual injury. Source: Hazardous Substances Data Bank (HSDB)
  • NFPA Fire Rating: 3 - Liquids and solids that can be ignited under almost all ambient temperature conditions. Materials produce hazardous atmospheres with air under almost all ambient temperatures or, though unaffected by ambient temperatures, are readily ignited under almost all conditions. Source: Hazardous Substances Data Bank (HSDB)
  • NFPA Instability Rating: 2 - Materials that readily undergo violent chemical changes at elevated temperatures and pressures. Source: Hazardous Substances Data Bank (HSDB)
  • NFPA Specific Notice: W - No water: Materials that react violently or explosively with water. Source: Hazardous Substances Data Bank (HSDB)
  • Toxicity Summary: IDENTIFICATION AND USE: Styrene is a colorless to yellowish, oily liquid. It is used in the manufacture of plastics, synthetic rubber, and resins, and as an insulator. It is also used as a flavoring agent for ice cream and candy. HUMAN STUDIES: Humans acutely exposed to styrene by inhalation to 800 ppm (3.4 mg/L) for 3 hr experience immediate eye and throat irritation, increased nasal mucous secretion, metallic taste, drowsiness, and vertigo. After test termination, slight muscular weakness, accompanied by inertia and depression were noted. Long-term contact with styrene results in blistering of the skin and development of dermatitis, which is thought to result from defatting of the skin. Effects on the liver (e.g., increased serum bile acid and enhanced activity of plasma enzymes) and reproductive system (e.g., decreased frequency of births and increased frequency of spontaneous abortions in female workers) have been reported. Epidemiologic studies found styrene workers had increased mortality or incidences of lymphohematopoietic cancers (leukaemia or lymphoma or all), with suggestive evidence for pancreatic and esophageal tumors. No adequate human studies are available for styren Source: Hazardous Substances Data Bank (HSDB)
  • Toxicity Summary: Styrene 7,8-oxide, a metabolite of styrene, can form DNA adducts by binding to deoxyguanosine. It is also mutagenic and causes increased frequency of sister chromatid exchange, chromosomal aberrations, micronucleated cells, and DNA strand breaks. (L1831) Source: Toxin and Toxin Target Database (T3DB)
  • Environmental Bioconcentration: BCF ranges of 15-140 and 12-113 were measured in fish for styrene using carp (Cyprinus carpio) which were exposed over an 8-week period to 0.3 and 0.03 mg/L, respectively(1). A BCF of 13.5 was measured in goldfish for styrene(2). According to a classification scheme(3), these measured BCF values suggest the potential for bioconcentration in aquatic organisms is low to high(SRC). Calculated biomagnification factors (BMF) for styrene in water respiring organisms (zooplankton, forage and predatory fish) and air breathing organisms (reptile, amphibian, sea bird, marine mammal, terrestrial herbivore and carnivore, human) were all less than 1(4). [ Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: TERRESTRIAL FATE: Based on a classification scheme(1), an experimental Koc value of 912(2), indicates that styrene is expected to have low mobility in soil(SRC). Volatilization of styrene from moist soil surfaces may be an important fate process(SRC) given a Henry's Law constant of 2.75X10-3 atm-cu m/mole(3). Styrene is expected to volatilize from dry soil surfaces(SRC) based upon a vapor pressure of 6.4 mm Hg at 25 °C(4). In an experimental study using loamy soil, 26% of applied styrene (2 mg/kg) volatilized after 31 days(5); volatilization of styrene from soil surfaces is expected to be slower than in water(6). A 100% of theoretical BOD after 2 weeks using activated sludge in the Japanese MITI test(7) suggests that biodegradation is an important environmental fate process in soil(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: AQUATIC FATE: Based on a classification scheme(1), an experimental Koc value of 912(2), indicates that styrene is expected to adsorb to suspended solids and sediment(SRC). Volatilization from water surfaces is expected(3) based upon a Henry's Law constant of 2.75X10-3 atm-cu m/mole(4). Using this Henry's Law constant and an estimation method(3), volatilization half-lives for a model river and model lake are 3 hours and 4 days, respectively(SRC). According to a classification scheme(5), measured BCF ranges from 12-140 in carp(6), suggests the potential for bioconcentration in aquatic organisms is high to low(SRC). A 100% of theoretical BOD after 2 weeks using activated sludge in the Japanese MITI test(7) suggests that biodegradation is an important environmental fate process in water(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), styrene, which has a vapor pressure of 6.4 mm Hg at 25 °C(2), is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase styrene is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 6.6 hours(SRC), calculated from its rate constant of 5.8X10-11 cu cm/molecule-sec at 25 °C(3). Vapor-phase styrene is also degraded in the atmosphere by reaction with ozone and nitrate radicals; the half-lives for these reactions in air are 24 and 3.7 hours, respectively(4). Styrene does not strongly absorb light at wavelengths above 270 nm(5) and, therefore, is not expected to be susceptible to direct photolysis by sunlight since sunlight consists of wavelengths above 290 nm(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Consumer Uses: Antioxidant; Fuel agents; Monomers; Binder; Solvent; Adhesion/cohesion promoter; Intermediate; Filler; Not Known or Reasonably Ascertainable; Viscosity modifiers Source: EPA Chemical Data Reporting (CDR)
  • Industry Uses: Plasticizer; Filler; Not Known or Reasonably Ascertainable; Intermediate; Etching agent; Solvent; Other; Monomers; Antioxidant; Fuel agents Source: EPA Chemical Data Reporting (CDR)
  • Uses: Styrene is used predominately in the production of polystyrene plastics and resins. Styrene is also used as an intermediate in the synthesis of materials used for ion exchange resins and to produce copolymers. Source: EPA Hazardous Air Pollutants
  • Sources/Uses: Styrene is used extensively in the manufacture of plastics, rubber, and resins. About 90,000 workers, including those who make boats, tubs and showers, are potentially exposed to styrene. [http://www.osha-slc.gov/SLTC/styrene/] Used to make polystyrene for packaging, insulation for buildings and refrigeration equipment, and disposable cups and containers; Also used in styrene-butadiene rubber, other polymers, and resins to make boats, shower stalls, tires, automotive parts, etc.; [ACGIH] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Industrial Processes with risk of exposure: Plastic Composites Manufacturing [Category: Industry]; Burning Synthetic Polymers [Category: Burn] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Activities with risk of exposure: Sculpturing plastics [Category: Hobbies]; Smoking cigarettes [Category: Food & Drugs] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Uses: Manufacture of plastics; synthetic rubber; resins; insulator. Source: Hazardous Substances Data Bank (HSDB)
  • Uses: Polystyrene; SBR /styrene-butadiene-rubber/, ABS /acrylonitrile-butadiene-styrene/ and SAN /styrene-acrylonitrile/ resins; protective coatings (styrene-butadiene latex; alkyds); styrenated polyesters; rubber-modified polystyrene; copolymer resins; intermediate. Source: Hazardous Substances Data Bank (HSDB)
  • Uses: Reported uses (ppm):; Table: Reported uses (ppm): (Flavor and Extract Manufacturers' Association) [Table#625] Source: Hazardous Substances Data Bank (HSDB)
  • Uses: The major uses for styrene are in plastics, latex paints and coatings, synthetic rubbers, polyesters and styrene-alkyd coatings. The broad spectrum of uses of these products includes construction, packaging, automotive and household goods. Packaging is the single largest application for styrenecontaining resins, particularly foams, used as fillers and cushioning. Construction applications include pipes, fittings, tanks, lighting fixtures and corrosion-resistant products. Household goods include synthetic marble, flooring, disposable tableware and moulded furnishings. Transport applications range from tyres to reinforced plastics and automobile body putty. Source: Hazardous Substances Data Bank (HSDB)
  • Uses: For more Uses (Complete) data for Styrene (6 total), please visit the HSDB record page. Source: Hazardous Substances Data Bank (HSDB)
  • Uses: Styrene is used to make plastics and rubber. It is a precursor to polystyrene and may be found in insulation, fiberglass, plastic pipes, automobile parts, shoes, drinking cups and other food containers, and carpet backing. Low levels of styrene also occur naturally in a variety of foods such as fruits, vegetables, nuts, beverages, and meats. Small amounts of styrene can be transferred to food from styrene-based packaging material. (L1831) Source: Toxin and Toxin Target Database (T3DB)

Mis en correspondance par: Existing checksum-valid CAS to unique PubChem CID match. Récupéré le: 2026-08-31. Ouvrir la fiche source

Les classifications scientifiques et les annotations de danger apportent du contexte et ne remplacent pas la décision réglementaire propre au marché indiquée ci-dessus.

Couverture des sources complémentaires et état des correspondances
SourceRésultatVérifié
EMBL-EBI ChEBICorrespondance exacte2026-08-31
NIH PubChem PUG-ViewCorrespondance exacte2026-08-31

Une absence de correspondance enregistrée est une preuve utile que la source a été vérifiée ; ce n’est pas l’affirmation que la substance n’existe pas ailleurs.

Récupéré depuis NIH PubChem le 2026-08-31 par correspondance CAS à somme de contrôle valide. Les propriétés chimiques ne remplacent pas la décision réglementaire de cette page.

Source officielle et provenance

Source enregistrée
ASEAN Cosmetic Directive annexes
Référence de la source
ASEAN Annex II, reference 1575
Identifiant de la fiche source
II-1575
Version de la source
2026-1
Langue de la source
English
État de la traduction
Original is English
Source mise à jour le
2026-06-22
Instantané vérifié le
2026-08-30 04:44 UTC
Méthode de validation
pdfplumber ruled-table extraction with per-annex reviewed counts
SHA-256
ffad59f6c01a92c82042c54203ee14969425c2a82bd04c2f4012ff82513e69f1

Notes du jeu de données enregistré

Couverture du jeu de données
Banned, restricted and positive-list substances under the harmonised ASEAN framework
Note sur l’autorité
Regional directive; member-state transitions and deviations still require local verification

Place de cette fiche dans le jeu de données du marché

2224
fiches ASEAN actuelles
1728
fiches marquées Prohibited
2224
fiches de cette version de la source
1930
fiches du marché avec identité CAS

Répartition des statuts

Un texte de conditions est présent pour 462 des 2224 fiches actuelles. Un champ de conditions vide est interprété selon le type de fiche ci-dessus ; il n’est jamais converti en une affirmation d’utilisation sans restriction.

ASEAN contexte du marché

Complete regional annex dataset

Version de la couverture : ASEAN Cosmetic Directive annexes 2026-1, 22 June 2026

Annexes II, III, IV, VI and VII covering prohibited, restricted and positive-list substances.

Liste de contrôle de vérification

  1. Search all ACD annexes by name and identifiers.
  2. Apply product type, maximum level and warning conditions.
  3. Confirm the target member state's adoption and transition date.
  4. Complete the local notification and responsible-company requirements.

Sources officielles du marché

Procédure de vérification et exhaustivité de la fiche

Avant d’utiliser ce résultat dans une décision de conformité

  1. Confirmez que « Styrene » et chaque identifiant CAS/CE correspondent à la matière de votre spécification fournisseur.
  2. Search all ACD annexes by name and identifiers.
  3. Apply product type, maximum level and warning conditions.
  4. Confirm the target member state's adoption and transition date.
  5. Complete the local notification and responsible-company requirements.
  6. Consignez la version de la source et revérifiez auprès de l’autorité de réglementation avant la fabrication, la notification ou la mise sur le marché.

Champs disponibles dans cette fiche

  • Nom officiel de la substanceDisponible
  • CASDisponible
  • ECDisponible
  • Texte de condition distinctAbsent de la ligne source
  • Date d’effetNon fourni
  • Empreinte de l’instantané et méthodeDisponible

Questions auxquelles cette page répond

This official record identifies the substance as prohibited for cosmetic use in the stated market scope. Do not rely on a formulation containing this identity until the cited source, effective date and exact substance match have been verified.

A prohibition entry may contain no separate condition text because the regulatory outcome is the prohibition itself. Regional annex coverage does not replace member-state implementation dates, notifications or national deviations.

La fiche cite ASEAN Annex II, reference 1575, version de la source 2026-1. Ouvrir la source officielle.

Non. Le CAS aide à déterminer l’identité, mais les juridictions peuvent classer différemment une même substance et appliquer des champs d’application, limites, avertissements et dates de transition différents.

Citation stable

Styrene. ASEAN Annex II, reference 1575. ASEAN. Source version 2026-1. CosIng Checker regulatory record: https://cosingchecker.com/fr/regulations/asean/records/3711/

Citez l’autorité de réglementation comme autorité juridique. Cette page est un index structuré de preuves et une aide à la vérification, et non un substitut au texte officiel ni à une évaluation juridique professionnelle.

Interprétation et limites pour ASEAN

This official record identifies the substance as prohibited for cosmetic use in the stated market scope.

Do not rely on a formulation containing this identity until the cited source, effective date and exact substance match have been verified.

Comment interpréter le rôle juridique

The cited row forms part of a binding rule or legally incorporated list for this market.

Preuves sur cette page

  • Résultat enregistré : Prohibited
  • Rôle juridique : Binding rule
  • Version de la source : 2026-1

Ce que cela ne prouve pas

Regional annex coverage does not replace member-state implementation dates, notifications or national deviations.

Recherche complémentaire sur la substance auprès de sources faisant autorité

Aucune de ces sources ne prévaut sur la décision de marché ci-dessus.

Cosmetic Ingredient Review safety assessments

Expert Panel conclusions, assessed ingredient groups, use conditions, dates and report documents

Independent expert review considered by FDA; not a government approval or binding market rule

Rechercher cette identité à la source

FDA Global Substance Registration System

UNII identifiers, preferred names, substance types, codes and public substance relationships

Identity registry only; UNII availability does not imply FDA review or approval

Rechercher cette identité à la source

ILO/WHO International Chemical Safety Cards

Hazards, symptoms, first aid, storage, incompatibilities and physical properties for covered chemicals

International occupational chemical-safety reference; not cosmetic-use approval

Rechercher cette identité à la source

Japan NITE-CHRIP

Chemical identity, Japanese and foreign legal lists, GHS hazards and exposure-related information

Chemical-management evidence; cosmetic status remains governed by the applicable MHLW standard and market rules

Rechercher cette identité à la source

NIOSH Pocket Guide to Chemical Hazards

REL, PEL, IDLH, properties, exposure routes, symptoms, target organs, first aid and measurement methods for covered workplace chemicals

US occupational-health guidance and limits; not a cosmetic ingredient decision

Rechercher cette identité à la source

OECD eChemPortal

Gateway to authority-owned physical-property, fate, ecotoxicity, toxicity, exposure and GHS records

Discovery gateway; each linked authority remains responsible for its data

Rechercher cette identité à la source

US EPA CompTox CTX APIs

Clé d’API requise pour l’import

DTXSID identity, experimental and predicted properties, toxicity, bioactivity, exposure and environmental data

Scientific and computational evidence; predictions must remain labelled and do not determine cosmetic legality

Rechercher cette identité à la source