Aller au contenu principal
Annexe II Entrée 1575 CMRModifiée 30 Jul 2020

Styrene

Styrene figure à l’annexe II en tant que substance interdite dans les produits cosmétiques mis sur le marché de l’UE.

Substance interdite— Annexe II, Règlement (CE) n° 1223/2009
Entrée: 1575
CMR

Détails de la fiche

Nom chimique

Styrene

Nom chimique / IUPAC

Styrene

Informations réglementaires

Règlement

(EU) 2019/831

Voir toutes les entrées fixées par cet acte

Ingrédients identifiés

CMR

CatégorieCarcinogenicMutagenicReprotoxic
Cat. 2——✓

Données clés

Annexe
Numéro d’entrée
1575

Identité et propriétés chimiques

Structure chimique 2D PubChem pour le CAS 100-42-5
CAS 100-42-5PubChem CID 7501

Styrene

Styrene is a vinylarene that is benzene carrying a vinyl group. It has been isolated from the benzoin resin produced by Styrax species. It has a role as a mutagen, a mouse metabolite and a plant metabolite. It is a volatile organic compound, a member of styrenes and a vinylarene. — ChEBI

Nom IUPAC
styrene
Formule moléculaire
C8H8
Masse moléculaire
104.15 g/mol
Masse exacte
104.062600255 Da
XLogP3
2,9
Surface polaire topologique
0,0 Ų
Donneurs de liaisons hydrogène
0
Accepteurs de liaisons hydrogène
0
Unités covalentes
1
Stéréocentres définis
0

Également connu sous le nom de

EthenylbenzenePhenylethyleneVinylbenzeneStyrolCinnameneStyrene monomerBenzene, ethenyl-Phenylethene
16 autres noms signalés
StyrolenePhenethyleneVinylbenzolStyroleVinyl benzeneStyropol SOCinnamolStyrenBenzene, vinyl-CinnamenolEthylene, phenyl-VinylbenzenStiroloStyreenVinyl-benzeneNCI-C02200
Identifiants de bases de données externes

Preuves issues de bases de données scientifiques complémentaires

EMBL-EBI ChEBI
Correspondance exacte d’identifiantCHEBI:27452

styrene

A vinylarene that is benzene carrying a vinyl group. It has been isolated from the benzoin resin produced by Styrax species.

Formule
C8H8
Masse moyenne
104.152 g/mol
Masse monoisotopique
104.06260 Da
Charge formelle
0
  • styrenes — is a (CHEBI:26799)
  • vinylarene — is a (CHEBI:51324)
  • volatile organic compound — is a (CHEBI:134179)
  • mutagen — has role (CHEBI:25435)
  • plant metabolite — has role (CHEBI:76924)
  • mouse metabolite — has role (CHEBI:75771)
  • mutagen — has role (CHEBI:25435)
  • plant metabolite — has role (CHEBI:76924)
  • mouse metabolite — has role (CHEBI:75771)
  • styrenes — is a (CHEBI:26799)
  • vinylarene — is a (CHEBI:51324)
  • volatile organic compound — is a (CHEBI:134179)
Noms supplémentaires validés
styreneethenylbenzenephenylethenePhenylethyleneStyrenStyreneStyrolvinylbenzene
Références croisées de cette source
  • CAS: 100-42-5 — NIST Chemistry WebBook
  • CAS: 100-42-5 — KEGG COMPOUND
  • CAS: 100-42-5 — ChemIDplus
  • REGISTRY_NUMBER: 1071236 — Reaxys
  • REGISTRY_NUMBER: 2991 — Gmelin
  • MANUAL_X_REF: c0115 — UM-BBD
  • MANUAL_X_REF: C07083 — KEGG COMPOUND
  • MANUAL_X_REF: C07083 — KEGG COMPOUND
  • MANUAL_X_REF: CPD-1092 — MetaCyc
  • MANUAL_X_REF: HMDB0034240 — HMDB
  • MANUAL_X_REF: Styrene — Wikipedia

Mis en correspondance par: Exact CAS cross-reference in the ChEBI compound record. Source mise à jour le: 2021-03-05. Récupéré le: 2026-08-31. Ouvrir la fiche source

NIH PubChem PUG-View
Correspondance exacte d’identifiant7501

Attributed physical-property, hazard, environmental and use annotations.

  • First Aid: EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.; SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. IMMEDIATELY call a hospital or poison control center even if no symptoms (such as redness or irritation) develop. IMMEDIATELY transport the victim to a hospital for treatment after washing the affected areas.; INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. IMMEDIATELY call a physician and be prepared to transport the victim to a hospital even if no symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop. Provide proper respiratory protection to rescuers entering an unknow Source: CAMEO Chemicals
  • ERG2024, Guide 128P (Styrene monomer, stabilized): General First Aid:; · Call 911 or emergency medical service.; · Ensure that medical personnel are aware of the material(s) involved, take precautions to protect themselves and avoid contamination.; · Move victim to fresh air if it can be done safely.; · Administer oxygen if breathing is difficult.; · If victim is not breathing:; -- DO NOT perform mouth-to-mouth resuscitation; the victim may have ingested or inhaled the substance.; -- If equipped and pulse detected, wash face and mouth, then give artificial respiration using a proper respiratory medical device (bag-valve mask, pocket mask equipped with a one-way valve or other device).; -- If no pulse detected or no respiratory medical device available, provide continuous compressions. Conduct a pulse check every two minutes or monitor for any signs of spontaneous respirations.; · Remove and isolate contaminated clothing and shoes.; · For minor skin contact, avoid spreading material on unaffected skin.; · In case of contact with substance, remove immediately by flushing skin or eyes with running water for at least 20 minutes.; · For severe burns, immediate medical attention is required.; · Effects of exposure (inhalation, ingestion, Source: Emergency Response Guidebook (ERG)
  • First Aid: (General first aid procedures); Eye: Irrigate immediately - If this chemical contacts the eyes, immediately wash (irrigate) the eyes with large amounts of water, occasionally lifting the lower and upper lids. Get medical attention immediately.; Skin: Water flush - If this chemical contacts the skin, flush the contaminated skin with water. Where there is evidence of skin irritation, get medical attention.; Breathing: Respiratory support; Swallow: Medical attention immediately - If this chemical has been swallowed, get medical attention immediately. Source: The National Institute for Occupational Safety and Health (NIOSH)
  • Signal: Danger Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • GHS Hazard Statements: H226: Flammable liquid and vapor [Warning Flammable liquids]; H315: Causes skin irritation [Warning Skin corrosion/irritation]; H319: Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H332: Harmful if inhaled [Warning Acute toxicity, inhalation]; H361d: Suspected of damaging the unborn child [Warning Reproductive toxicity]; H372: Causes damage to organs through prolonged or repeated exposure [Danger Specific target organ toxicity, repeated exposure] Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Precautionary Statement Codes: P203, P210, P233, P240, P241, P242, P243, P260, P261, P264, P264+P265, P270, P271, P280, P302+P352, P303+P361+P353, P304+P340, P305+P351+P338, P317, P318, P319, P321, P332+P317, P337+P317, P362+P364, P370+P378, P403+P235, P405, and P501 (click each P-code to see the statement) Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Note: This chemical does not meet GHS hazard criteria for < 0.1% (3 of 6114) of reports. Source: European Chemicals Agency (ECHA)
  • Signal: Danger Source: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H226 (> 99.9%): Flammable liquid and vapor [Warning Flammable liquids]; H304 (50.6%): May be fatal if swallowed and enters airways [Danger Aspiration hazard]; H315 (> 99.9%): Causes skin irritation [Warning Skin corrosion/irritation]; H319 (99.9%): Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H332 (98%): Harmful if inhaled [Warning Acute toxicity, inhalation]; H335 (52%): May cause respiratory irritation [Warning Specific target organ toxicity, single exposure; Respiratory tract irritation]; H361 (35.1%): Suspected of damaging fertility or the unborn child [Warning Reproductive toxicity]; H372 (73.8%): Causes damage to organs through prolonged or repeated exposure [Danger Specific target organ toxicity, repeated exposure]; H412 (49%): Harmful to aquatic life with long lasting effects [Hazardous to the aquatic environment, long-term hazard] Source: European Chemicals Agency (ECHA)
  • Precautionary Statement Codes: P203, P210, P233, P240, P241, P242, P243, P260, P261, P264, P264+P265, P270, P271, P273, P280, P301+P316, P302+P352, P303+P361+P353, P304+P340, P305+P351+P338, P317, P318, P319, P321, P331, P332+P317, P337+P317, P362+P364, P370+P378, P403+P233, P403+P235, P405, and P501 (click each P-code to see the statement) Source: European Chemicals Agency (ECHA)
  • ECHA C&L Notifications Summary: Aggregated GHS information provided per 6114 reports by companies from 92 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Reported as not meeting GHS hazard criteria per 3 of 6114 reports by companies.; There are 91 notifications provided by 6111 of 6114 reports by companies with hazard statement code(s).; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Source: European Chemicals Agency (ECHA)
  • Signal: Warning Source: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H226 (100%): Flammable liquid and vapor [Warning Flammable liquids]; H315 (100%): Causes skin irritation [Warning Skin corrosion/irritation]; H319 (100%): Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H332 (100%): Harmful if inhaled [Warning Acute toxicity, inhalation] Source: European Chemicals Agency (ECHA)
  • Precautionary Statement Codes: P210, P233, P240, P241, P242, P243, P261, P264, P264+P265, P271, P280, P302+P352, P303+P361+P353, P304+P340, P305+P351+P338, P317, P321, P332+P317, P337+P317, P362+P364, P370+P378, P403+P235, and P501 (click each P-code to see the statement) Source: European Chemicals Agency (ECHA)
  • ECHA C&L Notifications Summary: Aggregated GHS information provided per 39 reports by companies from 2 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Source: European Chemicals Agency (ECHA)
  • Health Effects: Styrene causes nervous system depression and may be carcinogenic. Animals studies have also shown that hearing loss and liver damage may occur. (L1831, L1832) Source: Toxin and Toxin Target Database (T3DB)
  • NFPA Health Rating: 2 - Materials that, under emergency conditions, can cause temporary incapacitation or residual injury. Source: Hazardous Substances Data Bank (HSDB)
  • NFPA Fire Rating: 3 - Liquids and solids that can be ignited under almost all ambient temperature conditions. Materials produce hazardous atmospheres with air under almost all ambient temperatures or, though unaffected by ambient temperatures, are readily ignited under almost all conditions. Source: Hazardous Substances Data Bank (HSDB)
  • NFPA Instability Rating: 2 - Materials that readily undergo violent chemical changes at elevated temperatures and pressures. Source: Hazardous Substances Data Bank (HSDB)
  • NFPA Specific Notice: W - No water: Materials that react violently or explosively with water. Source: Hazardous Substances Data Bank (HSDB)
  • Toxicity Summary: IDENTIFICATION AND USE: Styrene is a colorless to yellowish, oily liquid. It is used in the manufacture of plastics, synthetic rubber, and resins, and as an insulator. It is also used as a flavoring agent for ice cream and candy. HUMAN STUDIES: Humans acutely exposed to styrene by inhalation to 800 ppm (3.4 mg/L) for 3 hr experience immediate eye and throat irritation, increased nasal mucous secretion, metallic taste, drowsiness, and vertigo. After test termination, slight muscular weakness, accompanied by inertia and depression were noted. Long-term contact with styrene results in blistering of the skin and development of dermatitis, which is thought to result from defatting of the skin. Effects on the liver (e.g., increased serum bile acid and enhanced activity of plasma enzymes) and reproductive system (e.g., decreased frequency of births and increased frequency of spontaneous abortions in female workers) have been reported. Epidemiologic studies found styrene workers had increased mortality or incidences of lymphohematopoietic cancers (leukaemia or lymphoma or all), with suggestive evidence for pancreatic and esophageal tumors. No adequate human studies are available for styren Source: Hazardous Substances Data Bank (HSDB)
  • Toxicity Summary: Styrene 7,8-oxide, a metabolite of styrene, can form DNA adducts by binding to deoxyguanosine. It is also mutagenic and causes increased frequency of sister chromatid exchange, chromosomal aberrations, micronucleated cells, and DNA strand breaks. (L1831) Source: Toxin and Toxin Target Database (T3DB)
  • Environmental Bioconcentration: BCF ranges of 15-140 and 12-113 were measured in fish for styrene using carp (Cyprinus carpio) which were exposed over an 8-week period to 0.3 and 0.03 mg/L, respectively(1). A BCF of 13.5 was measured in goldfish for styrene(2). According to a classification scheme(3), these measured BCF values suggest the potential for bioconcentration in aquatic organisms is low to high(SRC). Calculated biomagnification factors (BMF) for styrene in water respiring organisms (zooplankton, forage and predatory fish) and air breathing organisms (reptile, amphibian, sea bird, marine mammal, terrestrial herbivore and carnivore, human) were all less than 1(4). [ Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: TERRESTRIAL FATE: Based on a classification scheme(1), an experimental Koc value of 912(2), indicates that styrene is expected to have low mobility in soil(SRC). Volatilization of styrene from moist soil surfaces may be an important fate process(SRC) given a Henry's Law constant of 2.75X10-3 atm-cu m/mole(3). Styrene is expected to volatilize from dry soil surfaces(SRC) based upon a vapor pressure of 6.4 mm Hg at 25 °C(4). In an experimental study using loamy soil, 26% of applied styrene (2 mg/kg) volatilized after 31 days(5); volatilization of styrene from soil surfaces is expected to be slower than in water(6). A 100% of theoretical BOD after 2 weeks using activated sludge in the Japanese MITI test(7) suggests that biodegradation is an important environmental fate process in soil(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: AQUATIC FATE: Based on a classification scheme(1), an experimental Koc value of 912(2), indicates that styrene is expected to adsorb to suspended solids and sediment(SRC). Volatilization from water surfaces is expected(3) based upon a Henry's Law constant of 2.75X10-3 atm-cu m/mole(4). Using this Henry's Law constant and an estimation method(3), volatilization half-lives for a model river and model lake are 3 hours and 4 days, respectively(SRC). According to a classification scheme(5), measured BCF ranges from 12-140 in carp(6), suggests the potential for bioconcentration in aquatic organisms is high to low(SRC). A 100% of theoretical BOD after 2 weeks using activated sludge in the Japanese MITI test(7) suggests that biodegradation is an important environmental fate process in water(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), styrene, which has a vapor pressure of 6.4 mm Hg at 25 °C(2), is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase styrene is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 6.6 hours(SRC), calculated from its rate constant of 5.8X10-11 cu cm/molecule-sec at 25 °C(3). Vapor-phase styrene is also degraded in the atmosphere by reaction with ozone and nitrate radicals; the half-lives for these reactions in air are 24 and 3.7 hours, respectively(4). Styrene does not strongly absorb light at wavelengths above 270 nm(5) and, therefore, is not expected to be susceptible to direct photolysis by sunlight since sunlight consists of wavelengths above 290 nm(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Consumer Uses: Antioxidant; Fuel agents; Monomers; Binder; Solvent; Adhesion/cohesion promoter; Intermediate; Filler; Not Known or Reasonably Ascertainable; Viscosity modifiers Source: EPA Chemical Data Reporting (CDR)
  • Industry Uses: Plasticizer; Filler; Not Known or Reasonably Ascertainable; Intermediate; Etching agent; Solvent; Other; Monomers; Antioxidant; Fuel agents Source: EPA Chemical Data Reporting (CDR)
  • Uses: Styrene is used predominately in the production of polystyrene plastics and resins. Styrene is also used as an intermediate in the synthesis of materials used for ion exchange resins and to produce copolymers. Source: EPA Hazardous Air Pollutants
  • Sources/Uses: Styrene is used extensively in the manufacture of plastics, rubber, and resins. About 90,000 workers, including those who make boats, tubs and showers, are potentially exposed to styrene. [http://www.osha-slc.gov/SLTC/styrene/] Used to make polystyrene for packaging, insulation for buildings and refrigeration equipment, and disposable cups and containers; Also used in styrene-butadiene rubber, other polymers, and resins to make boats, shower stalls, tires, automotive parts, etc.; [ACGIH] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Industrial Processes with risk of exposure: Plastic Composites Manufacturing [Category: Industry]; Burning Synthetic Polymers [Category: Burn] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Activities with risk of exposure: Sculpturing plastics [Category: Hobbies]; Smoking cigarettes [Category: Food & Drugs] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Uses: Manufacture of plastics; synthetic rubber; resins; insulator. Source: Hazardous Substances Data Bank (HSDB)
  • Uses: Polystyrene; SBR /styrene-butadiene-rubber/, ABS /acrylonitrile-butadiene-styrene/ and SAN /styrene-acrylonitrile/ resins; protective coatings (styrene-butadiene latex; alkyds); styrenated polyesters; rubber-modified polystyrene; copolymer resins; intermediate. Source: Hazardous Substances Data Bank (HSDB)
  • Uses: Reported uses (ppm):; Table: Reported uses (ppm): (Flavor and Extract Manufacturers' Association) [Table#625] Source: Hazardous Substances Data Bank (HSDB)
  • Uses: The major uses for styrene are in plastics, latex paints and coatings, synthetic rubbers, polyesters and styrene-alkyd coatings. The broad spectrum of uses of these products includes construction, packaging, automotive and household goods. Packaging is the single largest application for styrenecontaining resins, particularly foams, used as fillers and cushioning. Construction applications include pipes, fittings, tanks, lighting fixtures and corrosion-resistant products. Household goods include synthetic marble, flooring, disposable tableware and moulded furnishings. Transport applications range from tyres to reinforced plastics and automobile body putty. Source: Hazardous Substances Data Bank (HSDB)
  • Uses: For more Uses (Complete) data for Styrene (6 total), please visit the HSDB record page. Source: Hazardous Substances Data Bank (HSDB)
  • Uses: Styrene is used to make plastics and rubber. It is a precursor to polystyrene and may be found in insulation, fiberglass, plastic pipes, automobile parts, shoes, drinking cups and other food containers, and carpet backing. Low levels of styrene also occur naturally in a variety of foods such as fruits, vegetables, nuts, beverages, and meats. Small amounts of styrene can be transferred to food from styrene-based packaging material. (L1831) Source: Toxin and Toxin Target Database (T3DB)

Mis en correspondance par: Existing checksum-valid CAS to unique PubChem CID match. Récupéré le: 2026-08-31. Ouvrir la fiche source

Les classifications scientifiques et les annotations de danger apportent du contexte et ne remplacent pas la décision réglementaire propre au marché indiquée ci-dessus.

Couverture des sources complémentaires et état des correspondances
SourceRésultatVérifié
EMBL-EBI ChEBICorrespondance exacte2026-08-31
NIH PubChem PUG-ViewCorrespondance exacte2026-08-31

Une absence de correspondance enregistrée est une preuve utile que la source a été vérifiée ; ce n’est pas l’affirmation que la substance n’existe pas ailleurs.

Récupéré depuis NIH PubChem le 2026-08-31 par correspondance CAS à somme de contrôle valide. Les propriétés chimiques ne remplacent pas la décision réglementaire de cette page.

Liens d’inventaire pour Styrene

Inventaire Restriction reference
Réf. 41112

STYRENE

CAS: 100-42-5
EC: 202-851-5

Les correspondances directes sont limitées pour cette fiche ; des entrées voisines de l’annexe II sont donc également affichées.

Annexe II 1577
Fiche voisine dans la même annexe

Formaldehyde

CAS: 50-00-0
EC: 200-001-8
Annexe II 1578
Fiche voisine dans la même annexe

Paraformaldehyde

CAS: 30525-89-4
EC: 608-494-5

Ce que signifie l’annexe II pour Styrene

Styrene figure comme substance interdite à l’annexe II du règlement (CE) n° 1223/2009 relatif aux produits cosmétiques et ne doit pas être ajouté intentionnellement. L’article 17 traite séparément des traces involontaires, techniquement inévitables dans le respect des bonnes pratiques de fabrication et compatibles avec l’exigence de sécurité de l’article 3.

Les formulateurs doivent contrôler leurs ingrédients et matières premières afin de s’assurer qu’aucun ne contient cette substance. Les fournisseurs doivent fournir, sur demande, une documentation confirmant son absence.

Cette fiche est liée à 1 ingrédient de l’inventaire CosIng pour le recoupement des noms et des identifiants. La page fait également apparaître 12 fiches d’annexe associées présentant des identifiants, une logique d’annexe ou des schémas de dénomination qui se recoupent.

Liste de contrôle de conformité

  • Vérifiez que cette substance est absente de toutes les matières premières et formulations finies.
  • Demandez aux fournisseurs de matières premières une attestation d’absence ou un certificat d’analyse.
  • Consignez le résultat du contrôle dans le dossier d’information produit (DIP).
  • Cette substance a une classification CMR. Examinez le tableau CMR ci-dessus et vérifiez le statut actuel dans les annexes II/III avant toute utilisation.

Questions fréquentes

Oui. Styrene figure à l’annexe II du règlement (CE) n° 1223/2009 relatif aux produits cosmétiques et est interdit en tant qu’ingrédient cosmétique ajouté intentionnellement. L’article 17 prévoit une exception étroite pour les petites quantités involontaires techniquement inévitables dans le respect des bonnes pratiques de fabrication, à condition que le produit reste sûr au sens de l’article 3.

Le CAS 100-42-5 est l’identifiant numérique unique attribué à Styrene par le Chemical Abstracts Service. Dans les travaux de conformité cosmétique, le numéro CAS sert à recouper la substance entre les bases de données réglementaires, les spécifications de matières premières et les rapports d’évaluation de la sécurité. Plusieurs entrées d’annexe de l’UE peuvent partager le même numéro CAS si la même substance apparaît dans des conditions différentes ou dans des annexes différentes.

Styrene a une classification CMR (cancérogène, mutagène ou toxique pour la reproduction) en vertu du règlement CLP de l’UE. Selon l’article 15 du règlement (CE) n° 1223/2009 relatif aux produits cosmétiques, les substances CMR des catégories 1A ou 1B sont interdites dans les cosmétiques, sauf autorisation expresse. Les substances CMR de catégorie 2 ne peuvent être utilisées que si le SCCS les a jugées sûres. Vérifiez toujours le statut actuel dans les annexes et les éventuelles dérogations applicables avant toute utilisation.

Utilisez l’outil Vérificateur INCI de ce site pour coller votre liste complète d’ingrédients (INCI) et l’analyser par rapport à toutes les entrées des annexes II à VI. L’outil met en évidence les ingrédients correspondant à des fiches soumises à restrictions, interdites ou signalées comme allergènes. C’est utile pour un contrôle rapide de conformité des formules de produits finis ou des déclarations de matières premières.

Note de source pour la fiche Styrene de l’annexe II

Cette page résume une fiche de l’annexe II pour Styrene à partir de documents publics de la Commission européenne sur les cosmétiques et ajoute les correspondances d’inventaire ou d’identifiants associées lorsqu’elles sont disponibles.

Utilisez cette page de fiche pour examiner les conditions de l’annexe II pour Styrene, mais confirmez toute décision réglementaire finale auprès du libellé officiel en vigueur de l’annexe et des fichiers sources.

Outils et étapes suivantes

Vérifiez votre formule

Collez une liste INCI complète pour détecter Styrene et d’autres fiches d’annexe de l’UE signalées en une seule passe.

Vérificateur INCI

Comparer des entrées

Comparez Styrene côte à côte avec une autre fiche d’annexe pour examiner les différences de restrictions, de concentrations et d’annexe.

Comparer

Parcourir l’annexe

Consultez toutes les fiches de l’annexe II et comparez les conditions réglementaires entre les substances de cette annexe.

Ouvrir l’annexe II