Aller au contenu principal
IngrédientMise à jour CosIng 2 Mar 2011

DIMETHYLBUTYL ACETATE

1,3-Dimethylbutyl acetate

DIMETHYLBUTYL ACETATE figure dans l’inventaire CosIng de l’UE, mais aucune fiche d’annexe directe n’est encore associée sur cette page.

En un coup d’œil

Fonction
Perfuming
CAS
108-84-9
EC
203-621-7
Annexes de l’UE
Non répertoriéAucune fiche d’annexe de l’UE n’est associée. Ce n’est pas une autorisation.

Preuves réglementaires par marché

Aucune règle pour cet ingrédient n’a été importée pour aucun des 13 marchés suivis ici.

Cela décrit cet inventaire, et non le droit. L’absence de règle importée n’est pas la preuve qu’un ingrédient est autorisé : une règle peut exister sous un autre nom ou identifiant, ou dans un jeu de données pas encore importé ici.

Détails d’inventaire pour DIMETHYLBUTYL ACETATE

Nom INCI

DIMETHYLBUTYL ACETATE

Description

1,3-Dimethylbutyl acetate

Provenance de la fiche

Référence d’inventaire
39600
Identité importée
DIMETHYLBUTYL ACETATE
Mise à jour de la source
02/03/2011
Notes de source CosIng de la Commission européenne

Données clés

Restriction
—
Fonction
  • PERFUMING

    Used for perfume and aromatic raw materials.

Identité et propriétés chimiques

Structure chimique 2D PubChem pour le CAS 108-84-9
CAS 108-84-9PubChem CID 7959

4-Methyl-2-pentyl acetate

Methylamyl acetate appears as a clear colorless liquid. Flash point 95 °F. Less dense than water and insoluble in water. Vapors heavier than air. — CAMEO Chemicals

Nom IUPAC
4-methylpentan-2-yl acetate
Formule moléculaire
C8H16O2
Masse moléculaire
144.21 g/mol
Masse exacte
144.115029749 Da
XLogP3
2,2
Surface polaire topologique
26,3 Ų
Donneurs de liaisons hydrogène
0
Accepteurs de liaisons hydrogène
2
Unités covalentes
1
Stéréocentres définis
0

Également connu sous le nom de

1,3-Dimethylbutyl acetateMethylamyl acetateMethylisoamyl acetate4-Methyl-2-amyl acetatesec-Hexyl acetate1,3-Dimethylbutyl ethanoateMethyl amyl acetateMethylisobutylcarbinol acetate
16 autres noms signalés
Methylisobutylcarbinyl acetate2-Pentanol, 4-methyl-, acetate4-Methyl-2-pentanol, acetateNSC 5674-Methyl-2-pentanol acetateAcetic acid, 1,3-dimethylbutyl esterHSDB 1155IP9ZB28RWN2-Pentanol, 4-methyl-, 2-acetateEINECS 203-621-7Acetic Acid 1,3-Dimethylbutyl EsterUN12331,3-Dimethylbutylester kyseliny octoveBRN 1749848sek.Isohexylester kyseliny octove [Czech]sek.Isohexylester kyseliny octove
Identifiants de bases de données externes

Preuves issues de bases de données scientifiques complémentaires

NIH PubChem PUG-View
Correspondance exacte d’identifiant7959

Attributed physical-property, hazard, environmental and use annotations.

  • First Aid: Excerpt from NIOSH Pocket Guide for sec-Hexyl acetate:; Eye: IRRIGATE IMMEDIATELY - If this chemical contacts the eyes, immediately wash (irrigate) the eyes with large amounts of water, occasionally lifting the lower and upper lids. Get medical attention immediately.; Skin: WATER FLUSH PROMPTLY - If this chemical contacts the skin, flush the contaminated skin with water promptly. If this chemical penetrates the clothing, immediately remove the clothing and flush the skin with water promptly. If irritation persists after washing, get medical attention.; Breathing: RESPIRATORY SUPPORT - If a person breathes large amounts of this chemical, move the exposed person to fresh air at once. If breathing has stopped, perform artificial respiration. Keep the affected person warm and at rest. Get medical attention as soon as possible.; Swallow: MEDICAL ATTENTION IMMEDIATELY - If this chemical has been swallowed, get medical attention immediately. (NIOSH, 2024) Source: CAMEO Chemicals
  • ERG2024, Guide 130 (Methylamyl acetate): General First Aid:; · Call 911 or emergency medical service.; · Ensure that medical personnel are aware of the material(s) involved, take precautions to protect themselves and avoid contamination.; · Move victim to fresh air if it can be done safely.; · Administer oxygen if breathing is difficult.; · If victim is not breathing:; -- DO NOT perform mouth-to-mouth resuscitation; the victim may have ingested or inhaled the substance.; -- If equipped and pulse detected, wash face and mouth, then give artificial respiration using a proper respiratory medical device (bag-valve mask, pocket mask equipped with a one-way valve or other device).; -- If no pulse detected or no respiratory medical device available, provide continuous compressions. Conduct a pulse check every two minutes or monitor for any signs of spontaneous respirations.; · Remove and isolate contaminated clothing and shoes.; · For minor skin contact, avoid spreading material on unaffected skin.; · In case of contact with substance, remove immediately by flushing skin or eyes with running water for at least 20 minutes.; · For severe burns, immediate medical attention is required.; · Effects of exposure (inhalation, ingestion, Source: Emergency Response Guidebook (ERG)
  • First Aid: (General first aid procedures); Eye: Irrigate immediately - If this chemical contacts the eyes, immediately wash (irrigate) the eyes with large amounts of water, occasionally lifting the lower and upper lids. Get medical attention immediately.; Skin: Water flush promptly - If this chemical contacts the skin, flush the contaminated skin with water promptly. If this chemical penetrates the clothing, immediately remove the clothing and flush the skin with water promptly. If irritation persists after washing, get medical attention.; Breathing: Respiratory support; Swallow: Medical attention immediately - If this chemical has been swallowed, get medical attention immediately. Source: The National Institute for Occupational Safety and Health (NIOSH)
  • Signal: Warning Source: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H226 (100%): Flammable liquid and vapor [Warning Flammable liquids]; H315 (30.5%): Causes skin irritation [Warning Skin corrosion/irritation]; H319 (30.5%): Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H335 (29.7%): May cause respiratory irritation [Warning Specific target organ toxicity, single exposure; Respiratory tract irritation] Source: European Chemicals Agency (ECHA)
  • Precautionary Statement Codes: P210, P233, P240, P241, P242, P243, P261, P264, P264+P265, P271, P280, P302+P352, P303+P361+P353, P304+P340, P305+P351+P338, P319, P321, P332+P317, P337+P317, P362+P364, P370+P378, P403+P233, P403+P235, P405, and P501 (click each P-code to see the statement) Source: European Chemicals Agency (ECHA)
  • ECHA C&L Notifications Summary: Aggregated GHS information provided per 128 reports by companies from 3 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Source: European Chemicals Agency (ECHA)
  • Signal: Warning Source: NITE-CMC
  • GHS Hazard Statements: H226: Flammable liquid and vapor [Warning Flammable liquids]; H315: Causes skin irritation [Warning Skin corrosion/irritation]; H319: Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H335: May cause respiratory irritation [Warning Specific target organ toxicity, single exposure; Respiratory tract irritation]; H336: May cause drowsiness or dizziness [Warning Specific target organ toxicity, single exposure; Narcotic effects] Source: NITE-CMC
  • Precautionary Statement Codes: P210, P233, P240, P241, P242, P243, P261, P264, P264+P265, P271, P280, P302+P352, P303+P361+P353, P304+P340, P305+P351+P338, P319, P321, P332+P317, P337+P317, P362+P364, P370+P378, P403+P233, P403+P235, P405, and P501 (click each P-code to see the statement) Source: NITE-CMC
  • GHS Hazard Statements: H226: Flammable liquid and vapor [Warning Flammable liquids]; H315: Causes skin irritation [Warning Skin corrosion/irritation]; H320: Causes eye irritation [Warning Serious eye damage/eye irritation]; H335: May cause respiratory irritation [Warning Specific target organ toxicity, single exposure; Respiratory tract irritation]; H336: May cause drowsiness or dizziness [Warning Specific target organ toxicity, single exposure; Narcotic effects] Source: NITE-CMC
  • NFPA Health Rating: 0 - Materials that, under emergency conditions, would offer no hazard beyond that of ordinary combustible materials. Source: Hazardous Substances Data Bank (HSDB)
  • NFPA Fire Rating: 2 - Materials that must be moderately heated or exposed to relatively high ambient temperatures before ignition can occur. Materials would not under normal conditions form hazardous atmospheres with air, but under high ambient temperatures or under moderate heating could release vapor in sufficient quantities to produce hazardous atmospheres with air. Source: Hazardous Substances Data Bank (HSDB)
  • NFPA Instability Rating: 0 - Materials that in themselves are normally stable, even under fire conditions. Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Bioconcentration: An estimated BCF of 66 was calculated for 4-methyl-2-pentyl acetate(SRC), using an estimated log Kow of 2.7(1,SRC) and a recommended regression-derived equation(2). According to a classification scheme(3), this BCF suggests that bioconcentration in aquatic organisms is moderate, not high(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: TERRESTRIAL FATE: Based on a recommended classification scheme(1), an estimated Koc value of 700(SRC), determined from an estimated log Kow of 2.7(2,SRC) and a recommended regression-derived equation(3), indicates that 4-methyl-2-pentyl acetate is expected to have low mobility in soil(SRC). Volatilization of 4-methyl-2-pentyl acetate from moist soil surfaces is expected to be important(SRC) given an estimated Henry's Law constant of 5.8X10-4 atm-cu m/mole at 20 °C(SRC) from its experimental values for vapor pressure, 4.0 mm Hg(4), and water solubility, 1.3X10+3 mg/l(4). The potential for volatilization of 4-methyl-2-pentyl acetate from dry soil surfaces may exist(SRC) based upon its measured vapor pressure(4). Volatilization is expected to be attenuated by adsorption(SRC). Biodegradation of 4-methyl-2-pentyl acetate in soil may be important(SRC), based upon its biodegradation in aerobic screening tests(5). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: AQUATIC FATE: Based on a recommended classification scheme(1), an estimated Koc value of 700(SRC), determined from an estimated log Kow of 2.7(2,SRC) and a recommended regression-derived equation(3), indicates that 4-methyl-2-pentyl acetate is expected to adsorb to suspended solids and sediment in water(SRC). 4-Methyl-2-pentyl acetate is expected to volatilize from water surfaces(3,SRC) based on an estimated Henry's Law constant of 5.8X10-4 atm-cu m/mole at 20 °C(SRC) from its experimental values for vapor pressure, 4.0 mm Hg(4), and water solubility, 1.3X10+3 mg/l(4). Estimated volatilization half-lives for a model river and model lake are 5.3 hours and 5.3 days, respectively(3,SRC). Adsorption is expected to attenuate volatilization(SRC). According to a classification scheme(5), an estimated BCF of 66(3,SRC), from an estimated log Kow(2,SRC), suggests that bioconcentration in aquatic organisms is moderate, not high(SRC). 4-Methyl-2-pentyl acetate is expected to biodegrade in aquatic systems(SRC). In aerobic screening tests using an unacclimated sewage seed, 4-methyl-2-pentyl acetate reached 20, 87, 62 and 69% of its theoretical BOD in freshwater and 11, 22, 52, and 67% of its the Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), 4-methyl-2-pentyl acetate, which has a measured vapor pressure of 4 mm Hg at 20 °C(2), is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase 4-methyl-2-pentyl acetate is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be about 2.0 days(3,SRC). Source: Hazardous Substances Data Bank (HSDB)

Mis en correspondance par: Existing checksum-valid CAS to unique PubChem CID match. Récupéré le: 2026-08-31. Ouvrir la fiche source

Les classifications scientifiques et les annotations de danger apportent du contexte et ne remplacent pas la décision réglementaire propre au marché indiquée ci-dessus.

Couverture des sources complémentaires et état des correspondances
SourceRésultatVérifié
NIH PubChem PUG-ViewCorrespondance exacte2026-08-31

Une absence de correspondance enregistrée est une preuve utile que la source a été vérifiée ; ce n’est pas l’affirmation que la substance n’existe pas ailleurs.

Récupéré depuis NIH PubChem le 2026-08-31 par correspondance CAS à somme de contrôle valide. Les propriétés chimiques ne remplacent pas la décision réglementaire de cette page.

Ingrédients ayant des fonctions de formulation communes

Sources officielles et scientifiques complémentaires

11 bases de données externes pour vérifier cette identité

Comment DIMETHYLBUTYL ACETATE apparaît dans l’inventaire CosIng

L’inventaire CosIng répertorie DIMETHYLBUTYL ACETATE comme ingrédient cosmétique et cette page l’associe à 0 fiche d’annexe. L’entrée d’inventaire reprend les noms et identifiants, tandis que la fiche d’annexe indique où la substance est interdite, soumise à restrictions ou inscrite sur une liste positive dans le droit de l’UE sur les cosmétiques.

DIMETHYLBUTYL ACETATE est aussi associé à 1 fonction cosmétique dans les données officielles. Les désignations de fonction décrivent l’usage prévu, mais ne remplacent pas l’examen réglementaire des fiches d’annexe associées avant un travail de formulation ou d’étiquetage.

Questions fréquentes

DIMETHYLBUTYL ACETATE figure dans l’inventaire des ingrédients CosIng de l’UE, sans fiche de restriction d’annexe directement associée pour le moment. L’absence de lien avec une annexe ne garantit pas une utilisation sans restriction ; vérifiez toujours auprès de la base de données officielle CosIng actuelle avant de formuler.

Selon l’inventaire CosIng de l’UE, DIMETHYLBUTYL ACETATE porte la ou les désignations de fonction suivantes :

Le CAS 108-84-9 peut apparaître dans plusieurs fiches d’annexe de l’UE. La page de recherche par CAS présente toutes les entrées des annexes II à VI partageant cet identifiant, ce qui est utile pour déterminer le statut réglementaire transversal aux annexes d’une même substance chimique.

Utilisez le vérificateur INCI pour analyser une liste d’ingrédients complète sur des marchés sélectionnés, ou comparez cette substance sur tous les jeux de données de marchés pris en charge.

Note de source pour DIMETHYLBUTYL ACETATE

Cette page reproduit l’entrée d’inventaire CosIng de DIMETHYLBUTYL ACETATE issue de documents publics de la Commission européenne sur les ingrédients cosmétiques et affiche les identifiants associés, même si aucune correspondance directe avec une annexe n’est actuellement rattachée.

Utilisez cette page d’inventaire pour étudier DIMETHYLBUTYL ACETATE et comparer les fiches associées, mais vérifiez les restrictions et le statut juridique auprès du texte officiel en vigueur et de la législation avant toute décision réglementaire.

Outils et étapes suivantes

Vérifiez votre formule

Analysez une liste INCI complète pour détecter DIMETHYLBUTYL ACETATE et les éventuelles restrictions d’annexes de l’UE ou signalements d’allergènes associés.

Vérificateur INCI

Rechercher des ingrédients similaires

Trouvez d’autres ingrédients de l’inventaire et entrées d’annexe liés à DIMETHYLBUTYL ACETATE, à ses identifiants ou à des variantes de nom proches.

Rechercher