Zum Hauptinhalt springen
InhaltsstoffCosIng-Aktualisierung 2 Mär 2011

DIMETHYLBUTYL ACETATE

1,3-Dimethylbutyl acetate

DIMETHYLBUTYL ACETATE ist im EU-CosIng-Verzeichnis aufgeführt, aber auf dieser Seite sind noch keine direkten Anhangseinträge verknüpft.

Auf einen Blick

Funktion
Perfuming
CAS
108-84-9
EC
203-621-7
EU-Anhänge
Nicht aufgeführtEs ist kein EU-Anhangseintrag verknüpft. Das ist keine Zulassung.

Regulatorische Belege nach Markt

Für keinen der hier erfassten 13 Märkte wurde eine Vorschrift zu diesem Inhaltsstoff importiert.

Das beschreibt dieses Verzeichnis, nicht das Recht. Eine fehlende importierte Vorschrift ist kein Beleg dafür, dass ein Inhaltsstoff zulässig ist: Eine Vorschrift kann unter einem anderen Namen oder einer anderen Kennung oder in einem hier noch nicht importierten Datensatz existieren.

Verzeichnisangaben zu DIMETHYLBUTYL ACETATE

INCI-Name

DIMETHYLBUTYL ACETATE

Beschreibung

1,3-Dimethylbutyl acetate

Herkunft des Eintrags

Verzeichnisverweis
39600
Importierte Identität
DIMETHYLBUTYL ACETATE
Quellenaktualisierung
02/03/2011
Quellenhinweise zu CosIng der Europäischen Kommission

Kerndaten

Beschränkung
—
Funktion
  • PERFUMING

    Used for perfume and aromatic raw materials.

Chemische Identität und Eigenschaften

Chemische 2D-Struktur aus PubChem für CAS 108-84-9
CAS 108-84-9PubChem CID 7959

4-Methyl-2-pentyl acetate

Methylamyl acetate appears as a clear colorless liquid. Flash point 95 °F. Less dense than water and insoluble in water. Vapors heavier than air. — CAMEO Chemicals

IUPAC-Name
4-methylpentan-2-yl acetate
Summenformel
C8H16O2
Molekulargewicht
144.21 g/mol
Exakte Masse
144.115029749 Da
XLogP3
2,2
Topologische polare Oberfläche
26,3 Ų
Wasserstoffbrücken-Donoren
0
Wasserstoffbrücken-Akzeptoren
2
Kovalente Einheiten
1
Definierte Stereozentren
0

Auch bekannt als

1,3-Dimethylbutyl acetateMethylamyl acetateMethylisoamyl acetate4-Methyl-2-amyl acetatesec-Hexyl acetate1,3-Dimethylbutyl ethanoateMethyl amyl acetateMethylisobutylcarbinol acetate
16 weitere gemeldete Namen
Methylisobutylcarbinyl acetate2-Pentanol, 4-methyl-, acetate4-Methyl-2-pentanol, acetateNSC 5674-Methyl-2-pentanol acetateAcetic acid, 1,3-dimethylbutyl esterHSDB 1155IP9ZB28RWN2-Pentanol, 4-methyl-, 2-acetateEINECS 203-621-7Acetic Acid 1,3-Dimethylbutyl EsterUN12331,3-Dimethylbutylester kyseliny octoveBRN 1749848sek.Isohexylester kyseliny octove [Czech]sek.Isohexylester kyseliny octove
Kennungen in externen Datenbanken

Belege aus weiteren wissenschaftlichen Datenbanken

NIH PubChem PUG-View
Exakter Kennungstreffer7959

Attributed physical-property, hazard, environmental and use annotations.

  • First Aid: Excerpt from NIOSH Pocket Guide for sec-Hexyl acetate:; Eye: IRRIGATE IMMEDIATELY - If this chemical contacts the eyes, immediately wash (irrigate) the eyes with large amounts of water, occasionally lifting the lower and upper lids. Get medical attention immediately.; Skin: WATER FLUSH PROMPTLY - If this chemical contacts the skin, flush the contaminated skin with water promptly. If this chemical penetrates the clothing, immediately remove the clothing and flush the skin with water promptly. If irritation persists after washing, get medical attention.; Breathing: RESPIRATORY SUPPORT - If a person breathes large amounts of this chemical, move the exposed person to fresh air at once. If breathing has stopped, perform artificial respiration. Keep the affected person warm and at rest. Get medical attention as soon as possible.; Swallow: MEDICAL ATTENTION IMMEDIATELY - If this chemical has been swallowed, get medical attention immediately. (NIOSH, 2024) Quelle: CAMEO Chemicals
  • ERG2024, Guide 130 (Methylamyl acetate): General First Aid:; · Call 911 or emergency medical service.; · Ensure that medical personnel are aware of the material(s) involved, take precautions to protect themselves and avoid contamination.; · Move victim to fresh air if it can be done safely.; · Administer oxygen if breathing is difficult.; · If victim is not breathing:; -- DO NOT perform mouth-to-mouth resuscitation; the victim may have ingested or inhaled the substance.; -- If equipped and pulse detected, wash face and mouth, then give artificial respiration using a proper respiratory medical device (bag-valve mask, pocket mask equipped with a one-way valve or other device).; -- If no pulse detected or no respiratory medical device available, provide continuous compressions. Conduct a pulse check every two minutes or monitor for any signs of spontaneous respirations.; · Remove and isolate contaminated clothing and shoes.; · For minor skin contact, avoid spreading material on unaffected skin.; · In case of contact with substance, remove immediately by flushing skin or eyes with running water for at least 20 minutes.; · For severe burns, immediate medical attention is required.; · Effects of exposure (inhalation, ingestion, Quelle: Emergency Response Guidebook (ERG)
  • First Aid: (General first aid procedures); Eye: Irrigate immediately - If this chemical contacts the eyes, immediately wash (irrigate) the eyes with large amounts of water, occasionally lifting the lower and upper lids. Get medical attention immediately.; Skin: Water flush promptly - If this chemical contacts the skin, flush the contaminated skin with water promptly. If this chemical penetrates the clothing, immediately remove the clothing and flush the skin with water promptly. If irritation persists after washing, get medical attention.; Breathing: Respiratory support; Swallow: Medical attention immediately - If this chemical has been swallowed, get medical attention immediately. Quelle: The National Institute for Occupational Safety and Health (NIOSH)
  • Signal: Warning Quelle: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H226 (100%): Flammable liquid and vapor [Warning Flammable liquids]; H315 (30.5%): Causes skin irritation [Warning Skin corrosion/irritation]; H319 (30.5%): Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H335 (29.7%): May cause respiratory irritation [Warning Specific target organ toxicity, single exposure; Respiratory tract irritation] Quelle: European Chemicals Agency (ECHA)
  • Precautionary Statement Codes: P210, P233, P240, P241, P242, P243, P261, P264, P264+P265, P271, P280, P302+P352, P303+P361+P353, P304+P340, P305+P351+P338, P319, P321, P332+P317, P337+P317, P362+P364, P370+P378, P403+P233, P403+P235, P405, and P501 (click each P-code to see the statement) Quelle: European Chemicals Agency (ECHA)
  • ECHA C&L Notifications Summary: Aggregated GHS information provided per 128 reports by companies from 3 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Quelle: European Chemicals Agency (ECHA)
  • Signal: Warning Quelle: NITE-CMC
  • GHS Hazard Statements: H226: Flammable liquid and vapor [Warning Flammable liquids]; H315: Causes skin irritation [Warning Skin corrosion/irritation]; H319: Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H335: May cause respiratory irritation [Warning Specific target organ toxicity, single exposure; Respiratory tract irritation]; H336: May cause drowsiness or dizziness [Warning Specific target organ toxicity, single exposure; Narcotic effects] Quelle: NITE-CMC
  • Precautionary Statement Codes: P210, P233, P240, P241, P242, P243, P261, P264, P264+P265, P271, P280, P302+P352, P303+P361+P353, P304+P340, P305+P351+P338, P319, P321, P332+P317, P337+P317, P362+P364, P370+P378, P403+P233, P403+P235, P405, and P501 (click each P-code to see the statement) Quelle: NITE-CMC
  • GHS Hazard Statements: H226: Flammable liquid and vapor [Warning Flammable liquids]; H315: Causes skin irritation [Warning Skin corrosion/irritation]; H320: Causes eye irritation [Warning Serious eye damage/eye irritation]; H335: May cause respiratory irritation [Warning Specific target organ toxicity, single exposure; Respiratory tract irritation]; H336: May cause drowsiness or dizziness [Warning Specific target organ toxicity, single exposure; Narcotic effects] Quelle: NITE-CMC
  • NFPA Health Rating: 0 - Materials that, under emergency conditions, would offer no hazard beyond that of ordinary combustible materials. Quelle: Hazardous Substances Data Bank (HSDB)
  • NFPA Fire Rating: 2 - Materials that must be moderately heated or exposed to relatively high ambient temperatures before ignition can occur. Materials would not under normal conditions form hazardous atmospheres with air, but under high ambient temperatures or under moderate heating could release vapor in sufficient quantities to produce hazardous atmospheres with air. Quelle: Hazardous Substances Data Bank (HSDB)
  • NFPA Instability Rating: 0 - Materials that in themselves are normally stable, even under fire conditions. Quelle: Hazardous Substances Data Bank (HSDB)
  • Environmental Bioconcentration: An estimated BCF of 66 was calculated for 4-methyl-2-pentyl acetate(SRC), using an estimated log Kow of 2.7(1,SRC) and a recommended regression-derived equation(2). According to a classification scheme(3), this BCF suggests that bioconcentration in aquatic organisms is moderate, not high(SRC). Quelle: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: TERRESTRIAL FATE: Based on a recommended classification scheme(1), an estimated Koc value of 700(SRC), determined from an estimated log Kow of 2.7(2,SRC) and a recommended regression-derived equation(3), indicates that 4-methyl-2-pentyl acetate is expected to have low mobility in soil(SRC). Volatilization of 4-methyl-2-pentyl acetate from moist soil surfaces is expected to be important(SRC) given an estimated Henry's Law constant of 5.8X10-4 atm-cu m/mole at 20 °C(SRC) from its experimental values for vapor pressure, 4.0 mm Hg(4), and water solubility, 1.3X10+3 mg/l(4). The potential for volatilization of 4-methyl-2-pentyl acetate from dry soil surfaces may exist(SRC) based upon its measured vapor pressure(4). Volatilization is expected to be attenuated by adsorption(SRC). Biodegradation of 4-methyl-2-pentyl acetate in soil may be important(SRC), based upon its biodegradation in aerobic screening tests(5). Quelle: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: AQUATIC FATE: Based on a recommended classification scheme(1), an estimated Koc value of 700(SRC), determined from an estimated log Kow of 2.7(2,SRC) and a recommended regression-derived equation(3), indicates that 4-methyl-2-pentyl acetate is expected to adsorb to suspended solids and sediment in water(SRC). 4-Methyl-2-pentyl acetate is expected to volatilize from water surfaces(3,SRC) based on an estimated Henry's Law constant of 5.8X10-4 atm-cu m/mole at 20 °C(SRC) from its experimental values for vapor pressure, 4.0 mm Hg(4), and water solubility, 1.3X10+3 mg/l(4). Estimated volatilization half-lives for a model river and model lake are 5.3 hours and 5.3 days, respectively(3,SRC). Adsorption is expected to attenuate volatilization(SRC). According to a classification scheme(5), an estimated BCF of 66(3,SRC), from an estimated log Kow(2,SRC), suggests that bioconcentration in aquatic organisms is moderate, not high(SRC). 4-Methyl-2-pentyl acetate is expected to biodegrade in aquatic systems(SRC). In aerobic screening tests using an unacclimated sewage seed, 4-methyl-2-pentyl acetate reached 20, 87, 62 and 69% of its theoretical BOD in freshwater and 11, 22, 52, and 67% of its the Quelle: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), 4-methyl-2-pentyl acetate, which has a measured vapor pressure of 4 mm Hg at 20 °C(2), is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase 4-methyl-2-pentyl acetate is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be about 2.0 days(3,SRC). Quelle: Hazardous Substances Data Bank (HSDB)

Zugeordnet durch: Existing checksum-valid CAS to unique PubChem CID match. Abgerufen: 2026-08-31. Quelleneintrag öffnen

Wissenschaftliche Klassifizierungen und Gefahrenannotationen liefern Kontext und ersetzen nicht die oben gezeigte marktspezifische regulatorische Entscheidung.

Weitere Quellenabdeckung und Trefferstatus
QuelleErgebnisGeprüft
NIH PubChem PUG-ViewExakter Treffer2026-08-31

Ein erfasster Nicht-Treffer ist ein nützlicher Beleg dafür, dass die Quelle geprüft wurde; er ist keine Behauptung, dass der Stoff anderswo nicht existiert.

Am 2026-08-31 von NIH PubChem durch prüfsummengültigen CAS-Abgleich abgerufen. Chemische Eigenschaften ersetzen nicht die regulatorische Entscheidung auf dieser Seite.

Inhaltsstoffe mit sich überschneidenden Rezepturfunktionen

Weitere amtliche und wissenschaftliche Quellen

11 externe Datenbanken zur Prüfung dieser Identität

Wie DIMETHYLBUTYL ACETATE im CosIng-Verzeichnis erscheint

Das CosIng-Verzeichnis führt DIMETHYLBUTYL ACETATE als kosmetischen Inhaltsstoff, und diese Seite verknüpft ihn mit 0 Anhangseinträgen. Der Verzeichniseintrag erfasst Namen und Kennungen, während die Anhangseinträge zeigen, wo der Stoff im EU-Kosmetikrecht verboten, beschränkt oder positiv gelistet ist.

DIMETHYLBUTYL ACETATE ist in den amtlichen Daten außerdem mit 1 kosmetischen Funktion gekennzeichnet. Funktionsbezeichnungen beschreiben die beabsichtigte Verwendung, ersetzen aber nicht die regulatorische Prüfung verknüpfter Anhangseinträge vor der Rezeptierung oder Kennzeichnung.

Häufig gestellte Fragen

DIMETHYLBUTYL ACETATE ist im EU-CosIng-Inhaltsstoffverzeichnis aufgeführt; derzeit sind keine direkten Einträge zu Anhangsbeschränkungen verknüpft. Das Fehlen einer Anhangsverknüpfung garantiert keine unbeschränkte Verwendung – prüfen Sie vor der Rezeptierung stets die aktuelle amtliche CosIng-Datenbank.

Nach dem EU-CosIng-Verzeichnis trägt DIMETHYLBUTYL ACETATE die folgende(n) Funktionsbezeichnung(en):

CAS 108-84-9 kann in mehreren EU-Anhangseinträgen vorkommen. Die CAS-Suchseite zeigt alle Einträge der Anhänge II–VI mit dieser Kennung; das ist nützlich, um den anhangsübergreifenden regulatorischen Status desselben chemischen Stoffs zu erkennen.

Nutzen Sie den INCI-Checker, um eine vollständige Inhaltsstoffliste über ausgewählte Märkte hinweg zu prüfen, oder vergleichen Sie diesen Stoff über alle unterstützten Marktdatensätze.

Quellenhinweis zu DIMETHYLBUTYL ACETATE

Diese Seite gibt den CosIng-Verzeichniseintrag für DIMETHYLBUTYL ACETATE aus öffentlichen Materialien der Europäischen Kommission zu kosmetischen Inhaltsstoffen wieder und zeigt verknüpfte Kennungen auch dann, wenn derzeit kein direkter Anhangstreffer zugeordnet ist.

Nutzen Sie diese Verzeichnisseite, um DIMETHYLBUTYL ACETATE zu recherchieren und verknüpfte Einträge zu vergleichen; verifizieren Sie Beschränkungen und Rechtsstatus jedoch anhand des aktuellen amtlichen Quellentextes und Rechts, bevor Sie regulatorische Entscheidungen treffen.

Werkzeuge und nächste Schritte

Rezeptur prüfen

Eine vollständige INCI-Liste prüfen, um DIMETHYLBUTYL ACETATE und etwaige verknüpfte EU-Anhangsbeschränkungen oder Allergenmarkierungen zu erkennen.

INCI-Checker

Ähnliche Inhaltsstoffe suchen

Weitere Inhaltsstoffe aus dem Verzeichnis und Anhangseinträge finden, die mit DIMETHYLBUTYL ACETATE, seinen Kennungen oder nahen Namensvarianten zusammenhängen.

Suche