Aller au contenu principal
CAS 1 fiche

CAS 126-73-8

Le CAS 126-73-8 correspond à 1 fiche d’annexe de l’UE dans les annexes II à VI du règlement (CE) n° 1223/2009.

Fiches pour le CAS 126-73-8

1 au total

Identité et propriétés chimiques

Structure chimique 2D PubChem pour le CAS 126-73-8
CAS 126-73-8PubChem CID 31357

Tributyl Phosphate

Tributyl phosphate is a trialkyl phosphate that is the tributyl ester of phosphoric acid. — ChEBI

Nom IUPAC
tributyl phosphate
Formule moléculaire
C12H27O4P
Masse moléculaire
266.31 g/mol
Masse exacte
266.16469634 Da
XLogP3
2,9
Surface polaire topologique
44,8 Ų
Donneurs de liaisons hydrogène
0
Accepteurs de liaisons hydrogène
4
Unités covalentes
1
Stéréocentres définis
0

Également connu sous le nom de

Tri-n-butyl phosphateTributylphosphatePhosphoric acid tributyl esterTributylphosphatCelluphos 4tbpaDisflamoll TBTributilfosfato
16 autres noms signalés
TributylfosfaatTributoxyphosphine oxidePhosphoric acid, tributyl esterTributyle (phosphate de)Butyl phosphate, tri-TributylfosfatTri-N-butylphosphateButyl phosphate, ((BuO)3PO)MCS 249595UAS8YAF5Tributyl ester of phosphoric acidNSC-8484CHEBI:35019NSC8484tri-(n-butyl)-phosphateRefChem:190910
Identifiants de bases de données externes

Preuves issues de bases de données scientifiques complémentaires

NIH PubChem PUG-View
Correspondance exacte d’identifiant31357

Attributed physical-property, hazard, environmental and use annotations.

  • First Aid: EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.; SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. IMMEDIATELY call a hospital or poison control center even if no symptoms (such as redness or irritation) develop. IMMEDIATELY transport the victim to a hospital for treatment after washing the affected areas.; INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. IMMEDIATELY call a physician and be prepared to transport the victim to a hospital even if no symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop. Provide proper respiratory protection to rescuers entering an unknow Source: CAMEO Chemicals
  • First Aid: (General first aid procedures); Eye: Irrigate immediately - If this chemical contacts the eyes, immediately wash (irrigate) the eyes with large amounts of water, occasionally lifting the lower and upper lids. Get medical attention immediately.; Skin: Soap wash promptly - If this chemical contacts the skin, promptly wash the contaminated skin with soap and water. If this chemical penetrates the clothing, promptly remove the clothing and wash the skin with soap and water. Get medical attention promptly.; Breathing: Respiratory support; Swallow: Medical attention immediately - If this chemical has been swallowed, get medical attention immediately. Source: The National Institute for Occupational Safety and Health (NIOSH)
  • Signal: Warning Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • GHS Hazard Statements: H302: Harmful if swallowed [Warning Acute toxicity, oral]; H315: Causes skin irritation [Warning Skin corrosion/irritation]; H351: Suspected of causing cancer [Warning Carcinogenicity] Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Precautionary Statement Codes: P203, P264, P270, P280, P301+P317, P302+P352, P318, P321, P330, P332+P317, P362+P364, P405, and P501 (click each P-code to see the statement) Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Signal: Warning Source: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H302 (100%): Harmful if swallowed [Warning Acute toxicity, oral]; H315 (100%): Causes skin irritation [Warning Skin corrosion/irritation]; H351 (> 99.9%): Suspected of causing cancer [Warning Carcinogenicity]; H412 (19.6%): Harmful to aquatic life with long lasting effects [Hazardous to the aquatic environment, long-term hazard] Source: European Chemicals Agency (ECHA)
  • Precautionary Statement Codes: P203, P264, P270, P273, P280, P301+P317, P302+P352, P318, P321, P330, P332+P317, P362+P364, P405, and P501 (click each P-code to see the statement) Source: European Chemicals Agency (ECHA)
  • ECHA C&L Notifications Summary: Aggregated GHS information provided per 1091 reports by companies from 13 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Source: European Chemicals Agency (ECHA)
  • Signal: Danger Source: NITE-CMC
  • GHS Hazard Statements: H302: Harmful if swallowed [Warning Acute toxicity, oral]; H315: Causes skin irritation [Warning Skin corrosion/irritation]; H318: Causes serious eye damage [Danger Serious eye damage/eye irritation]; H332: Harmful if inhaled [Warning Acute toxicity, inhalation]; H351: Suspected of causing cancer [Warning Carcinogenicity]; H371: May cause damage to organs [Warning Specific target organ toxicity, single exposure]; H373: May causes damage to organs through prolonged or repeated exposure [Warning Specific target organ toxicity, repeated exposure]; H401: Toxic to aquatic life [Hazardous to the aquatic environment, acute hazard]; H411: Toxic to aquatic life with long lasting effects [Hazardous to the aquatic environment, long-term hazard] Source: NITE-CMC
  • Precautionary Statement Codes: P203, P260, P261, P264, P264+P265, P270, P271, P273, P280, P301+P317, P302+P352, P304+P340, P305+P354+P338, P308+P316, P317, P318, P319, P321, P330, P332+P317, P362+P364, P391, P405, and P501 (click each P-code to see the statement) Source: NITE-CMC
  • GHS Hazard Statements: H401: Toxic to aquatic life [Hazardous to the aquatic environment, acute hazard]; H411: Toxic to aquatic life with long lasting effects [Hazardous to the aquatic environment, long-term hazard] Source: NITE-CMC
  • Precautionary Statement Codes: P273, P391, and P501 (click each P-code to see the statement) Source: NITE-CMC
  • NFPA Health Rating: 3 - Materials that, under emergency conditions, can cause serious or permanent injury. Source: Hazardous Substances Data Bank (HSDB)
  • NFPA Fire Rating: 1 - Materials that must be preheated before ignition can occur. Materials require considerable preheating, under all ambient temperature conditions, before ignition and combustion can occur. Source: Hazardous Substances Data Bank (HSDB)
  • NFPA Instability Rating: 0 - Materials that in themselves are normally stable, even under fire conditions. Source: Hazardous Substances Data Bank (HSDB)
  • Toxicity Summary: IDENTIFICATION AND USE: Tributyl phosphate is a colorless to pale-yellow odorless liquid. It is used as a plasticizer for cellulose esters, lacquers, plastics, and vinyl resins. Used in fire-resistant aircraft hydraulic fluids. Other uses include heat-exchange medium, solvent extraction of metal ions from solution of reactor products, solvent for nitrocellulose, cellulose acetate, pigment grinding assistant, antifoaming agent, dielectric. HUMAN EXPOSURE AND TOXICITY: Breathing vapors of tributyl phosphate causes irritation of mucous membranes and if inhalation is prolonged there can be general poisoning with paralysis. In contact with skin tributyl phosphate can cause irritation. Tributyl phosphate may cause irritation of the eyes, nose, and throat. It may also cause nausea and headache. In a series of 42 patients with furniture related dermatitis, a positive patch test reaction was seen in 1 patient. In vitro it acts as androgen receptor, and glucocorticoid receptor antagonist. ANIMAL STUDIES: Tributyl phosphate was not acutely toxic by dermal exposure in the rabbit and in the guinea pig. Application to either intact or abraded skin of rabbits and guinea pigs produced irritation w Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Bioconcentration: BCFs of 7.1-20 and 5.5-10 were reported in carp (Cyprinus carpio) which were exposed to tributyl phosphate at 6 and 60 ppb, respectively, over a 6-week period(1). The BCF of tributyl phosphate (exposure concentration of 3-4 ug/L) in killifish (Oryzias latipes) was found to be 30-35 and in goldfish (Carassius auratus) was found to be 6-11(2). According to a classification scheme(3), these BCFs suggest bioconcentration in aquatic organisms is low to moderate(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 2400(SRC), determined from a structure estimation method(2), indicates that tributyl phosphate is expected to have slight mobility in soil(SRC). Volatilization of tributyl phosphate from moist soil surfaces is expected to be an important fate process(SRC) given an estimated Henry's Law constant of 1.4X10-6 atm-cu m/mole(SRC), based upon its vapor pressure, 1.13X10-3 mm Hg(3), and water solubility, 280 mg/L(4). However, adsorption to soil is expected to attenuate volatilization(SRC). Tributyl phosphate is not expected to volatilize from dry soil surfaces(SRC) based upon its vapor pressure(3). Biodegradation of 56-96% in activated sludge inoculum(4) and a 3% of theoretical BOD using activated sludge in the Japanese MITI test(5) suggest that biodegradation may be an important environmental fate process in soil(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 2400(SRC), determined from a structure estimation method(2), indicates that tributyl phosphate is expected to adsorb to suspended solids and sediment(SRC). Volatilization from water surfaces is expected(3) based upon an estimated Henry's Law constant of 1.4X10-6 atm-cu m/mole(SRC), derived from its vapor pressure, 1.13X10-3 mm Hg(4), and water solubility, 280 mg/L(5). Using this Henry's Law constant and an estimation method(3), volatilization half-lives for a model river and model lake are 40 and 300 days, respectively(SRC). Tributyl phosphate is not expected to undergo hydrolysis in the environment(SRC) due to estimated hydrolysis half-lives of 9.9 to 11.5 years at pH 9 to 5(2). According to a classification scheme(6), BCFs of 5.5-20 in carp(7), 30-35 in killifish and 6-11 in goldfish(8), suggest bioconcentration in aquatic organisms is low to moderate(SRC). Aqueous biodegradation test results for tributyl phosphate varied from negligible biodegradation(9-11) to 30-100% biodegradation(5,11). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), tributyl phosphate, which has a vapor pressure of 1.13X10-3 mm Hg at 25 °C(2), is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase tributyl phosphate is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 4.4 hours(SRC), calculated from its rate constant of 7.9X10-11 cu cm/molecule-sec at 25 °C(SRC) that was derived using a structure estimation method(3). Tributyl phosphate does not contain chromophores that absorb at wavelengths >290 nm(4) and, therefore, is not expected to be susceptible to direct photolysis by sunlight(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Industry Uses: Lubricating agent; Hydraulic fluids; Plasticizer; Flame retardant; Not Known or Reasonably Ascertainable; Defoamer Source: EPA Chemical Data Reporting (CDR)
  • Sources/Uses: Mainly used as a flame retardant in aircraft hydraulic fluid, which can contain 25 to 75% TBP; Also used as a solvent (rare earth extraction and nuclear fuel cycle), plasticizer, carrier for fluorescent dyes, and antifoam agent (cement casings for oil wells); [ACGIH] Used as an antifoaming agent (concrete, textile, and paper industries); [HSDB] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Industrial Processes with risk of exposure: Petroleum Production and Refining [Category: Industry]; Pulp and Paper Processing [Category: Industry]; Textiles (Fiber & Fabric Manufacturing) [Category: Industry]; Metal Extraction and Refining [Category: Industry] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Uses: Plasticizer for cellulose esters, lacquers, plastics, and vinyl resins. Source: Hazardous Substances Data Bank (HSDB)
  • Uses: ... Used in fire-resistant aircraft hydraulic fluids. Source: Hazardous Substances Data Bank (HSDB)
  • Uses: Heat-exchange medium, solvent extraction of metal ions from solution of reactor products, solvent for nitrocellulose, cellulose acetate, plasticizer, pigment grinding assistant, antifoam agent, dielectric. Source: Hazardous Substances Data Bank (HSDB)
  • Uses: Extraction chromatography, in which the organic extractant is adsorbed on the surfaces of a fine, porous powder placed in a column, offers another excellent method for separating the actinide elements from each other. Useful cation extracting agents include ... n-tributyl phosphate. Source: Hazardous Substances Data Bank (HSDB)
  • Uses: For more Uses (Complete) data for TRIBUTYL PHOSPHATE (10 total), please visit the HSDB record page. Source: Hazardous Substances Data Bank (HSDB)

Mis en correspondance par: Existing checksum-valid CAS to unique PubChem CID match. Récupéré le: 2026-08-31. Ouvrir la fiche source

Les classifications scientifiques et les annotations de danger apportent du contexte et ne remplacent pas la décision réglementaire propre au marché indiquée ci-dessus.

Couverture des sources complémentaires et état des correspondances
SourceRésultatVérifié
NIH PubChem PUG-ViewCorrespondance exacte2026-08-31

Une absence de correspondance enregistrée est une preuve utile que la source a été vérifiée ; ce n’est pas l’affirmation que la substance n’existe pas ailleurs.

Récupéré depuis NIH PubChem le 2026-09-02 par correspondance CAS à somme de contrôle valide. Les propriétés chimiques ne remplacent pas la décision réglementaire de cette page.

Comment le CAS 126-73-8 est utilisé sur ce site

Le CAS 126-73-8 est l’identifiant du Chemical Abstracts Service utilisé pour rattacher cette page à une substance précise. Dans le jeu de données actuel, 1 fiche d’annexe de l’UE partage cet identifiant, ce qui vous aide à vérifier si la même substance apparaît dans un seul contexte réglementaire ou dans plusieurs.

Utilisez cette page lorsqu’une spécification fournisseur, une FDS ou un dossier de matière première vous donne le CAS 126-73-8 et que vous devez voir au même endroit toutes les fiches liées des annexes II à VI. Les cartes d’entrées ci-dessus sont le moyen le plus rapide d’accéder aux limites de concentration, aux avertissements, à l’annexe concernée et aux conditions par type de produit.

Questions fréquentes

Une substance identifiée par le CAS 126-73-8 peut figurer dans plusieurs annexes du règlement de l’UE sur les cosmétiques lorsqu’elle est soumise à des conditions différentes selon les contextes. Par exemple, une substance peut être soumise à restrictions à l’annexe III avec des conditions précises, et le même CAS peut aussi figurer à l’annexe IV comme colorant autorisé, dans une entrée distincte avec ses propres conditions. Chaque entrée doit être examinée individuellement.

Recoupez le numéro CAS avec les fiches de spécification de vos matières premières et vos certificats d’analyse. Lorsqu’un CAS figure à l’annexe II, vérifiez son absence. Lorsqu’il figure à l’annexe III, vérifiez que les limites de concentration et les conditions de type de produit sont respectées dans votre formulation. Toutes les entrées d’annexe partageant ce numéro CAS sont énumérées ci-dessus.

Un numéro CAS est attribué par le Chemical Abstracts Service (États-Unis) et reconnu dans le monde entier. Un numéro CE est un identifiant de la Commission européenne issu d’inventaires tels que l’EINECS, l’ELINCS ou la liste NLP. Les deux identifiants peuvent figurer dans les entrées des annexes cosmétiques de l’UE. Certaines substances ont les deux, d’autres un seul, et certaines entrées plus anciennes peuvent n’en avoir aucun.

Le vérificateur INCI accepte les noms d’ingrédients, les numéros CAS et les numéros CE. Vérifiez directement ce numéro CAS, puis contrôlez le résultat auprès des fiches de spécification des fournisseurs et de toutes les conditions d’annexe associées.

Outils et étapes suivantes

Vérifiez votre formule

Analysez une liste INCI complète, puis utilisez le CAS 126-73-8 pour recouper les documents fournisseurs relatifs aux substances identifiées.

Vérificateur INCI

Parcourir les annexes

Parcourez toutes les annexes du règlement de l’UE sur les cosmétiques par catégorie.

Toutes les annexes

Rechercher par nom

Recherchez les noms INCI, alias ou identifiants associés qui figurent à côté du CAS 126-73-8 dans votre documentation.

Rechercher