Aller au contenu principal
CAS 1 fiche

CAS 123-30-8

Le CAS 123-30-8 correspond à 1 fiche d’annexe de l’UE dans les annexes II à VI du règlement (CE) n° 1223/2009.

Fiches pour le CAS 123-30-8

1 au total
Annexe
III
Entrée
272

P-AMINOPHENOL

4-Aminophenol

(a) To be printed on the la­bel: The mixing ratio. “Hair colourants can cause severe allergic reac­tions. Read and follow instruc­tions.This product is not intended for use on persons under the age of 16. Temporary ‘bla…

Identité et propriétés chimiques

Structure chimique 2D PubChem pour le CAS 123-30-8
CAS 123-30-8PubChem CID 403

4-Aminophenol

4-aminophenol is an amino phenol (one of the three possible isomers) which has the single amino substituent located para to the phenolic -OH group. It has a role as a metabolite and an allergen. — ChEBI

Nom IUPAC
4-aminophenol
Formule moléculaire
C6H7NO
Masse moléculaire
109.13 g/mol
Masse exacte
109.052763847 Da
XLogP3
0,0
Surface polaire topologique
46,3 Ų
Donneurs de liaisons hydrogène
2
Accepteurs de liaisons hydrogène
2
Unités covalentes
1
Stéréocentres définis
0

Également connu sous le nom de

p-aminophenol4-hydroxyanilinep-hydroxyanilinePhenol, 4-amino-ParanolCertinalActivolCitol
16 autres noms signalés
AzolRodinalUrsol P Base4-aminobenzenolFouramine PBenzofur Pp-HydroxyphenylaminePelagol P BaseUrsol PFourrine P BaseTertral P BaseUNALPelagol Grey P BaseDurafur Brown RBFurro P BaseNako Brown R
Identifiants de bases de données externes

Preuves issues de bases de données scientifiques complémentaires

NIH PubChem PUG-View
Correspondance exacte d’identifiant403

Attributed physical-property, hazard, environmental and use annotations.

  • Density: 4-Aminophenol crystals exist in two forms. The alpha form (from alcohol, water, or ethyl acetate) is the more stable and has an orthorhombic pyramidal structure, density 1.290 g/cu cm /alpha-4-Aminophenol/ Source: Hazardous Substances Data Bank (HSDB)
  • First Aid: EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.; SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.; INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) shou Source: CAMEO Chemicals
  • Signal: Warning Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • GHS Hazard Statements: H302: Harmful if swallowed [Warning Acute toxicity, oral]; H332: Harmful if inhaled [Warning Acute toxicity, inhalation]; H341: Suspected of causing genetic defects [Warning Germ cell mutagenicity]; H400: Very toxic to aquatic life [Warning Hazardous to the aquatic environment, acute hazard]; H410: Very toxic to aquatic life with long lasting effects [Warning Hazardous to the aquatic environment, long-term hazard] Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Precautionary Statement Codes: P203, P261, P264, P270, P271, P273, P280, P301+P317, P304+P340, P317, P318, P330, P391, P405, and P501 (click each P-code to see the statement) Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Signal: Warning Source: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H302+H332 (29.1%): Harmful if swallowed or if inhaled [Warning Acute toxicity, oral; acute toxicity, inhalation]; H302 (100%): Harmful if swallowed [Warning Acute toxicity, oral]; H317 (34.3%): May cause an allergic skin reaction [Warning Sensitization, Skin]; H332 (99.5%): Harmful if inhaled [Warning Acute toxicity, inhalation]; H341 (100%): Suspected of causing genetic defects [Warning Germ cell mutagenicity]; H373 (34.3%): May causes damage to organs through prolonged or repeated exposure [Warning Specific target organ toxicity, repeated exposure]; H400 (98.6%): Very toxic to aquatic life [Warning Hazardous to the aquatic environment, acute hazard]; H410 (100%): Very toxic to aquatic life with long lasting effects [Warning Hazardous to the aquatic environment, long-term hazard] Source: European Chemicals Agency (ECHA)
  • Precautionary Statement Codes: P203, P260, P261, P264, P270, P271, P272, P273, P280, P301+P317, P302+P352, P304+P340, P317, P318, P319, P321, P330, P333+P317, P362+P364, P391, P405, and P501 (click each P-code to see the statement) Source: European Chemicals Agency (ECHA)
  • ECHA C&L Notifications Summary: Aggregated GHS information provided per 364 reports by companies from 21 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Source: European Chemicals Agency (ECHA)
  • Signal: Danger Source: NITE-CMC
  • GHS Hazard Statements: H302: Harmful if swallowed [Warning Acute toxicity, oral]; H317: May cause an allergic skin reaction [Warning Sensitization, Skin]; H320: Causes eye irritation [Warning Serious eye damage/eye irritation]; H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled [Danger Sensitization, respiratory]; H341: Suspected of causing genetic defects [Warning Germ cell mutagenicity]; H361: Suspected of damaging fertility or the unborn child [Warning Reproductive toxicity]; H373: May causes damage to organs through prolonged or repeated exposure [Warning Specific target organ toxicity, repeated exposure]; H400: Very toxic to aquatic life [Warning Hazardous to the aquatic environment, acute hazard]; H410: Very toxic to aquatic life with long lasting effects [Warning Hazardous to the aquatic environment, long-term hazard] Source: NITE-CMC
  • Precautionary Statement Codes: P203, P233, P260, P261, P264, P264+P265, P270, P271, P272, P273, P280, P284, P301+P317, P302+P352, P304+P340, P305+P351+P338, P318, P319, P321, P330, P333+P317, P337+P317, P342+P316, P362+P364, P391, P403, P405, and P501 (click each P-code to see the statement) Source: NITE-CMC
  • Signal: Warning Source: NITE-CMC
  • GHS Hazard Statements: H302: Harmful if swallowed [Warning Acute toxicity, oral]; H317: May cause an allergic skin reaction [Warning Sensitization, Skin]; H332: Harmful if inhaled [Warning Acute toxicity, inhalation]; H341: Suspected of causing genetic defects [Warning Germ cell mutagenicity]; H361: Suspected of damaging fertility or the unborn child [Warning Reproductive toxicity]; H373: May causes damage to organs through prolonged or repeated exposure [Warning Specific target organ toxicity, repeated exposure]; H400: Very toxic to aquatic life [Warning Hazardous to the aquatic environment, acute hazard]; H410: Very toxic to aquatic life with long lasting effects [Warning Hazardous to the aquatic environment, long-term hazard] Source: NITE-CMC
  • Health Effects: 4-Aminophenol may act as a skin sensitizer and cause contact dermatitis. In addition, inhalation of large amounts can cause methemoglobinemia and bronchial asthma. (T21) Source: Toxin and Toxin Target Database (T3DB)
  • Cosmetic Ingredient Review Finding(s): Safe in the present practices of use and concentration. Ingredient, concentration, and use information are available in documents discoverable at https://cir-reports.cir-safety.org Source: Cosmetic Ingredient Review (CIR)
  • Toxicity Summary: 4-Aminobiphenyl requires metabolic activation in order to exert its toxicity. This is catalyzed by N-hydroxylation via cytochrome P450 1A2, then followed by O-sulfation and O-acetylation by sulfotransferase 1A1 and arylamine N-acetyltransferase 2. The metabolites of 4-aminobiphenyl then form adducts with DNA, inducing mutations. 4-Aminobiphenyl and its metabolites may also cross the placenta and have fetal effects. (1, 2, 3, 4). It is also though that the mode of action involves metabolic activation by N-hydroxylation, followed by N-esterification leading to the formation of a reactive electrophile, which binds covalently to DNA, principally to deoxyguanosine, leading to an increased rate of DNA mutations and ultimately to the development of cancer. In humans and dogs, the urinary bladder urothelium is the target organ, whereas in mice it is the bladder and liver; in other species, other tissues can be involved. Differences in organ specificity are thought to be due to differences in metabolic activation versus inactivation (A15085). Source: Toxin and Toxin Target Database (T3DB)
  • Environmental Bioconcentration: BCFs of 10-39 and 15-46 in carp (Cyprinus carpio) were reported for a 8 week study using 1.5 and 0.15 mg/L 4-aminophenol, respectively(1). According to a classification scheme(2), these BCFs suggest the potential for bioconcentration in aquatic organisms is low to moderate(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 90(SRC), determined from a structure estimation method(2), indicates that 4-aminophenol is expected to have high mobility in soil(SRC). However, anilines are expected to bind strongly to humus or organic matter in soils due to the high reactivity of the aromatic amino group(3,4), suggesting that mobility may be much lower in some soils(SRC). Measured pKa values are 5.48(5) and 10.46(6), for the amine and hydroxy functional groups, respectively(7). 4-Aminophenol is amphoteric and behaves either as a weak acid or weak base; the basic character usually predominates(8). Volatilization of 4-aminophenol from moist soil surfaces is not expected to be an important fate process(SRC) given an estimated Henry's Law constant of 3.6X10-10 atm-cu m/mole(SRC), based upon its vapor pressure, 4X10-5 mm Hg(9), and water solubility, 16,000 mg/L(10). 4-Aminophenol is not expected to volatilize from dry soil surfaces(SRC) based upon its vapor pressure(9). A 6% of theoretical BOD using activated sludge in the Japanese MITI test(11) suggests that biodegradation may not be important environmental fate process in soil(SRC). Ho Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 90(SRC), determined from a structure estimation method(2), indicates that 4-aminophenol is expected to adsorb to suspended solids and sediment(SRC). Volatilization from water surfaces is not expected(3) based upon an estimated Henry's Law constant of 3.6X10-10 atm-cu m/mole(SRC), derived from its vapor pressure, 4X10-5 mm Hg(4), and water solubility, 16,000 mg/L(5). According to a classification scheme(6), BCFs of 10-39 and 15-46 in carp (Cyprinus carpio)(7) suggest bioconcentration in aquatic organisms is low to moderate(SRC). 4-Aminophenol is not expected to undergo hydrolysis in the environment due to the lack of functional groups that hydrolyze under environmental conditions(3). 4-Aminophenol, under aerobic conditions, seems to biodegrade as shown by studies where 85 and 100% of 10 mg/L 4-aminophenol was degraded in river and seawater, respectively, however at 50 mg/L no biodegradation was observed(8). Under denitrifying and methanogenic conditions in sediment, 4-aminophenol was mineralized following a long lag phase at a rate of 15.7 and 20 umol/L/day, respectively(9). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), 4-aminophenol, which has a vapor pressure of 4X10-5 mm Hg at 25 °C(2), will exist in both the vapor and particulate phases in the ambient atmosphere. Vapor-phase 4-aminophenol is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 5 hours(SRC), calculated from its rate constant of 7.4X10-11 cu cm/molecule-sec at 25 °C(SRC) that was derived using a structure estimation method(3). Particulate-phase 4-aminophenol may be removed from the air by wet or dry deposition(SRC). 4-Aminophenol absorbs light at wavelengths of 294 nm(4) and, therefore, may be susceptible to direct photolysis by sunlight(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Cosmetic Ingredient Review Link: CIR ingredient: p-Aminophenol Source: Cosmetic Ingredient Review (CIR)
  • Sources/Uses: Used as a dye for textiles, hair, furs, and feathers; also used as a photographic developer and chemical intermediate for pharmaceuticals and dyes; [HSDB] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Industrial Processes with risk of exposure: Photographic Processing [Category: Other]; Fur Dressing and Dyeing [Category: Industry]; Textiles (Printing, Dyeing, or Finishing) [Category: Industry]; Dressing Hair [Category: Other] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Uses: Dyeing textiles, hair, furs, feathers; photographic developer; pharmaceuticals; antioxidants, oil additives Source: Hazardous Substances Data Bank (HSDB)
  • Uses: Intermediate in the manufacture of sulfur and azo dyes Source: Hazardous Substances Data Bank (HSDB)
  • Uses: CHEM INT FOR THE ANALGESIC, PHENACETIN, AND FOR OTHER ANALGESICS & ANTIPYRETICS; CHEM INT FOR THE DYES, DISPERSE YELLOW 1, ACID YELLOW 40, AND ACID YELLOW 76 Source: Hazardous Substances Data Bank (HSDB)
  • Uses: 4-Aminophenol is a strong reducing agent ... it also acts as a corrosion inhibitor in paints and as an anticorrosion-lubricating agent in 2-cycle engine fuels. 4-Aminophenol is also used as a wood stain, imparting a roselike color to timber Source: Hazardous Substances Data Bank (HSDB)
  • Uses: Used as a chemical intermediate for the synthesis of Acid Yellow 40; Acid Yellow 76; N-benzyl-p-aminophenol hydrochloride; N-butyryl-p-aminophenol; N-(4-hydroxyphenyl)glycine; N-lauroyl-p-aminophenol; N-methyl-p-aminophenol; paracetamol; N-pelagonoyl-p-aminophenol; N-stearoyl-p-aminophenol; Sulphur Black 11; Sulphur Green 1; Sulphur Green 9; Sulphur Green 11; Sulphur Red 10; triglycidyl-p-aminophenol Source: Hazardous Substances Data Bank (HSDB)
  • Uses: 4-Aminophenol is commonly used as a developer in black and white film, marketed under the name Rodinal. Aminophenols are also intermediates in the synthesis of dyes and can thus be found in numerous cosmetics products, particularly hair dyes. (L1882, L1883) Source: Toxin and Toxin Target Database (T3DB)

Mis en correspondance par: Existing checksum-valid CAS to unique PubChem CID match. Récupéré le: 2026-08-31. Ouvrir la fiche source

Les classifications scientifiques et les annotations de danger apportent du contexte et ne remplacent pas la décision réglementaire propre au marché indiquée ci-dessus.

Couverture des sources complémentaires et état des correspondances
SourceRésultatVérifié
NIH PubChem PUG-ViewCorrespondance exacte2026-08-31

Une absence de correspondance enregistrée est une preuve utile que la source a été vérifiée ; ce n’est pas l’affirmation que la substance n’existe pas ailleurs.

Récupéré depuis NIH PubChem le 2026-08-31 par correspondance CAS à somme de contrôle valide. Les propriétés chimiques ne remplacent pas la décision réglementaire de cette page.

Comment le CAS 123-30-8 est utilisé sur ce site

Le CAS 123-30-8 est l’identifiant du Chemical Abstracts Service utilisé pour rattacher cette page à une substance précise. Dans le jeu de données actuel, 1 fiche d’annexe de l’UE partage cet identifiant, ce qui vous aide à vérifier si la même substance apparaît dans un seul contexte réglementaire ou dans plusieurs.

Utilisez cette page lorsqu’une spécification fournisseur, une FDS ou un dossier de matière première vous donne le CAS 123-30-8 et que vous devez voir au même endroit toutes les fiches liées des annexes II à VI. Les cartes d’entrées ci-dessus sont le moyen le plus rapide d’accéder aux limites de concentration, aux avertissements, à l’annexe concernée et aux conditions par type de produit.

Questions fréquentes

Une substance identifiée par le CAS 123-30-8 peut figurer dans plusieurs annexes du règlement de l’UE sur les cosmétiques lorsqu’elle est soumise à des conditions différentes selon les contextes. Par exemple, une substance peut être soumise à restrictions à l’annexe III avec des conditions précises, et le même CAS peut aussi figurer à l’annexe IV comme colorant autorisé, dans une entrée distincte avec ses propres conditions. Chaque entrée doit être examinée individuellement.

Recoupez le numéro CAS avec les fiches de spécification de vos matières premières et vos certificats d’analyse. Lorsqu’un CAS figure à l’annexe II, vérifiez son absence. Lorsqu’il figure à l’annexe III, vérifiez que les limites de concentration et les conditions de type de produit sont respectées dans votre formulation. Toutes les entrées d’annexe partageant ce numéro CAS sont énumérées ci-dessus.

Un numéro CAS est attribué par le Chemical Abstracts Service (États-Unis) et reconnu dans le monde entier. Un numéro CE est un identifiant de la Commission européenne issu d’inventaires tels que l’EINECS, l’ELINCS ou la liste NLP. Les deux identifiants peuvent figurer dans les entrées des annexes cosmétiques de l’UE. Certaines substances ont les deux, d’autres un seul, et certaines entrées plus anciennes peuvent n’en avoir aucun.

Le vérificateur INCI accepte les noms d’ingrédients, les numéros CAS et les numéros CE. Vérifiez directement ce numéro CAS, puis contrôlez le résultat auprès des fiches de spécification des fournisseurs et de toutes les conditions d’annexe associées.

Outils et étapes suivantes

Vérifiez votre formule

Analysez une liste INCI complète, puis utilisez le CAS 123-30-8 pour recouper les documents fournisseurs relatifs aux substances identifiées.

Vérificateur INCI

Parcourir les annexes

Parcourez toutes les annexes du règlement de l’UE sur les cosmétiques par catégorie.

Toutes les annexes

Rechercher par nom

Recherchez les noms INCI, alias ou identifiants associés qui figurent à côté du CAS 123-30-8 dans votre documentation.

Rechercher