Aller au contenu principal
Annexe III Entrée 272 Modifiée 27 Jul 2020

P-AMINOPHENOL

4-Aminophenol

P-AMINOPHENOL figure à l’annexe III et ne peut être utilisé que dans les conditions indiquées dans cette fiche.

Substance soumise à restrictions— Annexe III, Règlement (CE) n° 1223/2009
Entrée: 272

Détails de la fiche

Autres restrictions

(a) (b) After mixing under oxidative condit­ions the maximum concentration ap­plied to hair or eyelashes must not exceed 0,9 %
(b) Professional use

Avertissements

(a) To be printed on the la­bel: The mixing ratio. “Hair colourants can cause severe allergic reac­tions. Read and follow instruc­tions.This product is not intended for use on persons under the age of 16. Temporary ‘black henna’ tattoos may increase your risk of allergy. Do not colour your hair if: — you have a rash on your face or sensitive, irri­tated and damaged scalp, — you have ever experi­enced any reaction after colouring your hair, — you have experienced a reaction to a tempor­ary ‘black henna’ tattoo in the past.” (b) As from 3 March 2018, to be printed on the la­bel: The mixing ratio. “This product can cause severe allergic reactions. Read and follow instruc­tions. This product is not in­tended for use on persons under the age of 16. Tem­porary ‘black henna’ tattoos may increase the risk of al­lergy.
Eyelashes shall not be co­loured if the consumer: — has a rash on the face or sensitive, irritated and damaged scalp, — has experienced any re­action after colouring hair or eyelashes, — has experienced a reac­tion to a temporary ‘black henna’ tattoo in the past. For professional use only. Rinse eyes immediately if product comes into contact with them”

Nom du glossaire INCI

P-AMINOPHENOL

Nom chimique

4-Aminophenol

Nom chimique / IUPAC

4-Aminophenol

Informations réglementaires

Règlement

(EU) 2017/237

Voir toutes les entrées fixées par cet acte

Ingrédients identifiés

Données clés

Annexe
Numéro d’entrée
272

Identité et propriétés chimiques

Structure chimique 2D PubChem pour le CAS 123-30-8
CAS 123-30-8PubChem CID 403

4-Aminophenol

4-aminophenol is an amino phenol (one of the three possible isomers) which has the single amino substituent located para to the phenolic -OH group. It has a role as a metabolite and an allergen. — ChEBI

Nom IUPAC
4-aminophenol
Formule moléculaire
C6H7NO
Masse moléculaire
109.13 g/mol
Masse exacte
109.052763847 Da
XLogP3
0,0
Surface polaire topologique
46,3 Ų
Donneurs de liaisons hydrogène
2
Accepteurs de liaisons hydrogène
2
Unités covalentes
1
Stéréocentres définis
0

Également connu sous le nom de

p-aminophenol4-hydroxyanilinep-hydroxyanilinePhenol, 4-amino-ParanolCertinalActivolCitol
16 autres noms signalés
AzolRodinalUrsol P Base4-aminobenzenolFouramine PBenzofur Pp-HydroxyphenylaminePelagol P BaseUrsol PFourrine P BaseTertral P BaseUNALPelagol Grey P BaseDurafur Brown RBFurro P BaseNako Brown R
Identifiants de bases de données externes

Preuves issues de bases de données scientifiques complémentaires

NIH PubChem PUG-View
Correspondance exacte d’identifiant403

Attributed physical-property, hazard, environmental and use annotations.

  • Density: 4-Aminophenol crystals exist in two forms. The alpha form (from alcohol, water, or ethyl acetate) is the more stable and has an orthorhombic pyramidal structure, density 1.290 g/cu cm /alpha-4-Aminophenol/ Source: Hazardous Substances Data Bank (HSDB)
  • First Aid: EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.; SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.; INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) shou Source: CAMEO Chemicals
  • Signal: Warning Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • GHS Hazard Statements: H302: Harmful if swallowed [Warning Acute toxicity, oral]; H332: Harmful if inhaled [Warning Acute toxicity, inhalation]; H341: Suspected of causing genetic defects [Warning Germ cell mutagenicity]; H400: Very toxic to aquatic life [Warning Hazardous to the aquatic environment, acute hazard]; H410: Very toxic to aquatic life with long lasting effects [Warning Hazardous to the aquatic environment, long-term hazard] Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Precautionary Statement Codes: P203, P261, P264, P270, P271, P273, P280, P301+P317, P304+P340, P317, P318, P330, P391, P405, and P501 (click each P-code to see the statement) Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Signal: Warning Source: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H302+H332 (29.1%): Harmful if swallowed or if inhaled [Warning Acute toxicity, oral; acute toxicity, inhalation]; H302 (100%): Harmful if swallowed [Warning Acute toxicity, oral]; H317 (34.3%): May cause an allergic skin reaction [Warning Sensitization, Skin]; H332 (99.5%): Harmful if inhaled [Warning Acute toxicity, inhalation]; H341 (100%): Suspected of causing genetic defects [Warning Germ cell mutagenicity]; H373 (34.3%): May causes damage to organs through prolonged or repeated exposure [Warning Specific target organ toxicity, repeated exposure]; H400 (98.6%): Very toxic to aquatic life [Warning Hazardous to the aquatic environment, acute hazard]; H410 (100%): Very toxic to aquatic life with long lasting effects [Warning Hazardous to the aquatic environment, long-term hazard] Source: European Chemicals Agency (ECHA)
  • Precautionary Statement Codes: P203, P260, P261, P264, P270, P271, P272, P273, P280, P301+P317, P302+P352, P304+P340, P317, P318, P319, P321, P330, P333+P317, P362+P364, P391, P405, and P501 (click each P-code to see the statement) Source: European Chemicals Agency (ECHA)
  • ECHA C&L Notifications Summary: Aggregated GHS information provided per 364 reports by companies from 21 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Source: European Chemicals Agency (ECHA)
  • Signal: Danger Source: NITE-CMC
  • GHS Hazard Statements: H302: Harmful if swallowed [Warning Acute toxicity, oral]; H317: May cause an allergic skin reaction [Warning Sensitization, Skin]; H320: Causes eye irritation [Warning Serious eye damage/eye irritation]; H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled [Danger Sensitization, respiratory]; H341: Suspected of causing genetic defects [Warning Germ cell mutagenicity]; H361: Suspected of damaging fertility or the unborn child [Warning Reproductive toxicity]; H373: May causes damage to organs through prolonged or repeated exposure [Warning Specific target organ toxicity, repeated exposure]; H400: Very toxic to aquatic life [Warning Hazardous to the aquatic environment, acute hazard]; H410: Very toxic to aquatic life with long lasting effects [Warning Hazardous to the aquatic environment, long-term hazard] Source: NITE-CMC
  • Precautionary Statement Codes: P203, P233, P260, P261, P264, P264+P265, P270, P271, P272, P273, P280, P284, P301+P317, P302+P352, P304+P340, P305+P351+P338, P318, P319, P321, P330, P333+P317, P337+P317, P342+P316, P362+P364, P391, P403, P405, and P501 (click each P-code to see the statement) Source: NITE-CMC
  • Signal: Warning Source: NITE-CMC
  • GHS Hazard Statements: H302: Harmful if swallowed [Warning Acute toxicity, oral]; H317: May cause an allergic skin reaction [Warning Sensitization, Skin]; H332: Harmful if inhaled [Warning Acute toxicity, inhalation]; H341: Suspected of causing genetic defects [Warning Germ cell mutagenicity]; H361: Suspected of damaging fertility or the unborn child [Warning Reproductive toxicity]; H373: May causes damage to organs through prolonged or repeated exposure [Warning Specific target organ toxicity, repeated exposure]; H400: Very toxic to aquatic life [Warning Hazardous to the aquatic environment, acute hazard]; H410: Very toxic to aquatic life with long lasting effects [Warning Hazardous to the aquatic environment, long-term hazard] Source: NITE-CMC
  • Health Effects: 4-Aminophenol may act as a skin sensitizer and cause contact dermatitis. In addition, inhalation of large amounts can cause methemoglobinemia and bronchial asthma. (T21) Source: Toxin and Toxin Target Database (T3DB)
  • Cosmetic Ingredient Review Finding(s): Safe in the present practices of use and concentration. Ingredient, concentration, and use information are available in documents discoverable at https://cir-reports.cir-safety.org Source: Cosmetic Ingredient Review (CIR)
  • Toxicity Summary: 4-Aminobiphenyl requires metabolic activation in order to exert its toxicity. This is catalyzed by N-hydroxylation via cytochrome P450 1A2, then followed by O-sulfation and O-acetylation by sulfotransferase 1A1 and arylamine N-acetyltransferase 2. The metabolites of 4-aminobiphenyl then form adducts with DNA, inducing mutations. 4-Aminobiphenyl and its metabolites may also cross the placenta and have fetal effects. (1, 2, 3, 4). It is also though that the mode of action involves metabolic activation by N-hydroxylation, followed by N-esterification leading to the formation of a reactive electrophile, which binds covalently to DNA, principally to deoxyguanosine, leading to an increased rate of DNA mutations and ultimately to the development of cancer. In humans and dogs, the urinary bladder urothelium is the target organ, whereas in mice it is the bladder and liver; in other species, other tissues can be involved. Differences in organ specificity are thought to be due to differences in metabolic activation versus inactivation (A15085). Source: Toxin and Toxin Target Database (T3DB)
  • Environmental Bioconcentration: BCFs of 10-39 and 15-46 in carp (Cyprinus carpio) were reported for a 8 week study using 1.5 and 0.15 mg/L 4-aminophenol, respectively(1). According to a classification scheme(2), these BCFs suggest the potential for bioconcentration in aquatic organisms is low to moderate(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 90(SRC), determined from a structure estimation method(2), indicates that 4-aminophenol is expected to have high mobility in soil(SRC). However, anilines are expected to bind strongly to humus or organic matter in soils due to the high reactivity of the aromatic amino group(3,4), suggesting that mobility may be much lower in some soils(SRC). Measured pKa values are 5.48(5) and 10.46(6), for the amine and hydroxy functional groups, respectively(7). 4-Aminophenol is amphoteric and behaves either as a weak acid or weak base; the basic character usually predominates(8). Volatilization of 4-aminophenol from moist soil surfaces is not expected to be an important fate process(SRC) given an estimated Henry's Law constant of 3.6X10-10 atm-cu m/mole(SRC), based upon its vapor pressure, 4X10-5 mm Hg(9), and water solubility, 16,000 mg/L(10). 4-Aminophenol is not expected to volatilize from dry soil surfaces(SRC) based upon its vapor pressure(9). A 6% of theoretical BOD using activated sludge in the Japanese MITI test(11) suggests that biodegradation may not be important environmental fate process in soil(SRC). Ho Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 90(SRC), determined from a structure estimation method(2), indicates that 4-aminophenol is expected to adsorb to suspended solids and sediment(SRC). Volatilization from water surfaces is not expected(3) based upon an estimated Henry's Law constant of 3.6X10-10 atm-cu m/mole(SRC), derived from its vapor pressure, 4X10-5 mm Hg(4), and water solubility, 16,000 mg/L(5). According to a classification scheme(6), BCFs of 10-39 and 15-46 in carp (Cyprinus carpio)(7) suggest bioconcentration in aquatic organisms is low to moderate(SRC). 4-Aminophenol is not expected to undergo hydrolysis in the environment due to the lack of functional groups that hydrolyze under environmental conditions(3). 4-Aminophenol, under aerobic conditions, seems to biodegrade as shown by studies where 85 and 100% of 10 mg/L 4-aminophenol was degraded in river and seawater, respectively, however at 50 mg/L no biodegradation was observed(8). Under denitrifying and methanogenic conditions in sediment, 4-aminophenol was mineralized following a long lag phase at a rate of 15.7 and 20 umol/L/day, respectively(9). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), 4-aminophenol, which has a vapor pressure of 4X10-5 mm Hg at 25 °C(2), will exist in both the vapor and particulate phases in the ambient atmosphere. Vapor-phase 4-aminophenol is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 5 hours(SRC), calculated from its rate constant of 7.4X10-11 cu cm/molecule-sec at 25 °C(SRC) that was derived using a structure estimation method(3). Particulate-phase 4-aminophenol may be removed from the air by wet or dry deposition(SRC). 4-Aminophenol absorbs light at wavelengths of 294 nm(4) and, therefore, may be susceptible to direct photolysis by sunlight(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Cosmetic Ingredient Review Link: CIR ingredient: p-Aminophenol Source: Cosmetic Ingredient Review (CIR)
  • Sources/Uses: Used as a dye for textiles, hair, furs, and feathers; also used as a photographic developer and chemical intermediate for pharmaceuticals and dyes; [HSDB] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Industrial Processes with risk of exposure: Photographic Processing [Category: Other]; Fur Dressing and Dyeing [Category: Industry]; Textiles (Printing, Dyeing, or Finishing) [Category: Industry]; Dressing Hair [Category: Other] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Uses: Dyeing textiles, hair, furs, feathers; photographic developer; pharmaceuticals; antioxidants, oil additives Source: Hazardous Substances Data Bank (HSDB)
  • Uses: Intermediate in the manufacture of sulfur and azo dyes Source: Hazardous Substances Data Bank (HSDB)
  • Uses: CHEM INT FOR THE ANALGESIC, PHENACETIN, AND FOR OTHER ANALGESICS & ANTIPYRETICS; CHEM INT FOR THE DYES, DISPERSE YELLOW 1, ACID YELLOW 40, AND ACID YELLOW 76 Source: Hazardous Substances Data Bank (HSDB)
  • Uses: 4-Aminophenol is a strong reducing agent ... it also acts as a corrosion inhibitor in paints and as an anticorrosion-lubricating agent in 2-cycle engine fuels. 4-Aminophenol is also used as a wood stain, imparting a roselike color to timber Source: Hazardous Substances Data Bank (HSDB)
  • Uses: Used as a chemical intermediate for the synthesis of Acid Yellow 40; Acid Yellow 76; N-benzyl-p-aminophenol hydrochloride; N-butyryl-p-aminophenol; N-(4-hydroxyphenyl)glycine; N-lauroyl-p-aminophenol; N-methyl-p-aminophenol; paracetamol; N-pelagonoyl-p-aminophenol; N-stearoyl-p-aminophenol; Sulphur Black 11; Sulphur Green 1; Sulphur Green 9; Sulphur Green 11; Sulphur Red 10; triglycidyl-p-aminophenol Source: Hazardous Substances Data Bank (HSDB)
  • Uses: 4-Aminophenol is commonly used as a developer in black and white film, marketed under the name Rodinal. Aminophenols are also intermediates in the synthesis of dyes and can thus be found in numerous cosmetics products, particularly hair dyes. (L1882, L1883) Source: Toxin and Toxin Target Database (T3DB)

Mis en correspondance par: Existing checksum-valid CAS to unique PubChem CID match. Récupéré le: 2026-08-31. Ouvrir la fiche source

Les classifications scientifiques et les annotations de danger apportent du contexte et ne remplacent pas la décision réglementaire propre au marché indiquée ci-dessus.

Couverture des sources complémentaires et état des correspondances
SourceRésultatVérifié
NIH PubChem PUG-ViewCorrespondance exacte2026-08-31

Une absence de correspondance enregistrée est une preuve utile que la source a été vérifiée ; ce n’est pas l’affirmation que la substance n’existe pas ailleurs.

Récupéré depuis NIH PubChem le 2026-08-31 par correspondance CAS à somme de contrôle valide. Les propriétés chimiques ne remplacent pas la décision réglementaire de cette page.

Liens d’inventaire pour P-AMINOPHENOL

Inventaire Restriction reference
Réf. 35831

P-AMINOPHENOL

CAS: 123-30-8
EC: 204-616-2
Annexe III 16
Type de produit commun

1-NAPHTHOL

CAS: 90-15-3
EC: 201-969-4
Annexe III 16
Type de produit commun

1-Naphthol

CAS: 90-15-3
EC: 201-969-4
Annexe III 22
Type de produit commun

RESORCINOL

CAS: 108-46-3
EC: 203-585-2

Ce que signifie l’annexe III pour P-AMINOPHENOL

P-AMINOPHENOL est une substance soumise à restrictions en vertu de l’annexe III du règlement (CE) n° 1223/2009 relatif aux produits cosmétiques. Son utilisation dans les cosmétiques n’est autorisée que dans les conditions précises énoncées dans l’entrée ci-dessus, y compris les limites de concentration, les restrictions de type de produit et les mentions d’avertissement requises.

Lorsque cette substance entre dans une formulation, toutes les conditions — concentration maximale, champ d’application du produit et mentions d’avertissement — doivent être respectées simultanément. Le respect d’une condition ne dispense pas des autres.

Cette fiche est liée à 1 ingrédient de l’inventaire CosIng pour le recoupement des noms et des identifiants. La page fait également apparaître 12 fiches d’annexe associées présentant des identifiants, une logique d’annexe ou des schémas de dénomination qui se recoupent.

Liste de contrôle de conformité

  • Confirmez la compatibilité avec le type de produit : (a) Hair dye sub­stance in oxidat­ive hair dye products (b) Products in­tended for col­ouring eyelashes
  • Faites figurer la mention d’avertissement requise sur l’étiquette du produit.
  • Consignez les conditions d’emploi dans le dossier d’information produit (DIP).

Questions fréquentes

P-AMINOPHENOL figure à l’annexe III du règlement (CE) n° 1223/2009 comme substance soumise à restrictions. Il ne peut être utilisé que dans les conditions précisées dans l’entrée, y compris toute concentration maximale, limitation de type de produit et mention d’avertissement requise indiquées ci-dessus.

Le CAS 123-30-8 est l’identifiant numérique unique attribué à P-AMINOPHENOL par le Chemical Abstracts Service. Dans les travaux de conformité cosmétique, le numéro CAS sert à recouper la substance entre les bases de données réglementaires, les spécifications de matières premières et les rapports d’évaluation de la sécurité. Plusieurs entrées d’annexe de l’UE peuvent partager le même numéro CAS si la même substance apparaît dans des conditions différentes ou dans des annexes différentes.

Utilisez l’outil Vérificateur INCI de ce site pour coller votre liste complète d’ingrédients (INCI) et l’analyser par rapport à toutes les entrées des annexes II à VI. L’outil met en évidence les ingrédients correspondant à des fiches soumises à restrictions, interdites ou signalées comme allergènes. C’est utile pour un contrôle rapide de conformité des formules de produits finis ou des déclarations de matières premières.

Note de source pour la fiche P-AMINOPHENOL de l’annexe III

Cette page résume une fiche de l’annexe III pour P-AMINOPHENOL à partir de documents publics de la Commission européenne sur les cosmétiques et ajoute les correspondances d’inventaire ou d’identifiants associées lorsqu’elles sont disponibles.

Utilisez cette page de fiche pour examiner les conditions de l’annexe III pour P-AMINOPHENOL, mais confirmez toute décision réglementaire finale auprès du libellé officiel en vigueur de l’annexe et des fichiers sources.

Outils et étapes suivantes

Vérifiez votre formule

Collez une liste INCI complète pour détecter P-AMINOPHENOL et d’autres fiches d’annexe de l’UE signalées en une seule passe.

Vérificateur INCI

Comparer des entrées

Comparez P-AMINOPHENOL côte à côte avec une autre fiche d’annexe pour examiner les différences de restrictions, de concentrations et d’annexe.

Comparer

Parcourir l’annexe

Consultez toutes les fiches de l’annexe III et comparez les conditions réglementaires entre les substances de cette annexe.

Ouvrir l’annexe III