Aller au contenu principal
CAS 0 fiche

CAS 106-65-0

Le CAS 106-65-0 correspond à 0 fiche d’annexe de l’UE dans les annexes II à VI du règlement (CE) n° 1223/2009.

Fiches pour le CAS 106-65-0

0 au total
Aucune fiche trouvée pour ce numéro CAS.

Identité et propriétés chimiques

Structure chimique 2D PubChem pour le CAS 106-65-0
CAS 106-65-0PubChem CID 7820

Dimethyl Succinate

Dimethyl succinate is a colorless liquid. (USCG, 1999) — CAMEO Chemicals

Nom IUPAC
dimethyl butanedioate
Formule moléculaire
C6H10O4
Masse moléculaire
146.14 g/mol
Masse exacte
146.05790880 Da
XLogP3
0,4
Surface polaire topologique
52,6 Ų
Donneurs de liaisons hydrogène
0
Accepteurs de liaisons hydrogène
4
Unités covalentes
1
Stéréocentres définis
0

Également connu sous le nom de

DimethylsuccinateButanedioic acid, dimethyl esterSuccinic acid, dimethyl esterMethyl butanedioateFEMA No. 23961,4-dimethyl butanedioateButanedioic acid, 1,4-dimethyl esterNSC-52209
16 autres noms signalés
914I2127JRRefChem:134276203-419-9Methyl succinateSuccinic acid dimethyl esterDBE-4 dibasic esterSuccinic acid-dimethyl esterDBE-4Dimethyl ester of succinic acidCH3OC(O)CH2CH2C(O)OCH3Dimethyl 2,3-butanedioatedimethyl butane-1,4-dioateCAS-106-65-0CCRIS 4803HSDB 5370EINECS 203-419-9
Identifiants de bases de données externes

Preuves issues de bases de données scientifiques complémentaires

EMBL-EBI ChEBI
Correspondance exacte d’identifiantCHEBI:165393

Dimethyl succinate

Formule
C6H10O4
Masse moyenne
146.142 g/mol
Masse monoisotopique
146.05791 Da
Charge formelle
0
  • fatty acid methyl ester — is a (CHEBI:4986)
  • fatty acid methyl ester — is a (CHEBI:4986)
Noms supplémentaires validés
dimethyl butanedioate
Références croisées de cette source

Mis en correspondance par: Exact CAS cross-reference in the ChEBI compound record. Récupéré le: 2026-08-31. Ouvrir la fiche source

NIH PubChem PUG-View
Correspondance exacte d’identifiant7820

Attributed physical-property, hazard, environmental and use annotations.

  • First Aid: EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.; SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.; INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) shou Source: CAMEO Chemicals
  • Note: This chemical does not meet GHS hazard criteria for 61.8% (730 of 1181) of all reports. Source: European Chemicals Agency (ECHA)
  • Signal: Warning Source: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H319 (36.4%): Causes serious eye irritation [Warning Serious eye damage/eye irritation] Source: European Chemicals Agency (ECHA)
  • Precautionary Statement Codes: P264+P265, P280, P305+P351+P338, and P337+P317 (click each P-code to see the statement) Source: European Chemicals Agency (ECHA)
  • ECHA C&L Notifications Summary: Aggregated GHS information provided per 1181 reports by companies from 9 notifications to the ECHA C&L Inventory.; Reported as not meeting GHS hazard criteria per 730 of 1181 reports by companies.; There are 7 notifications provided by 451 of 1181 reports by companies with hazard statement code(s).; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Source: European Chemicals Agency (ECHA)
  • Signal: Warning Source: NITE-CMC
  • GHS Hazard Statements: H227: Combustible liquid [Warning Flammable liquids]; H320: Causes eye irritation [Warning Serious eye damage/eye irritation]; H373: May causes damage to organs through prolonged or repeated exposure [Warning Specific target organ toxicity, repeated exposure]; H402: Harmful to aquatic life [Hazardous to the aquatic environment, acute hazard] Source: NITE-CMC
  • Precautionary Statement Codes: P210, P260, P264+P265, P273, P280, P305+P351+P338, P319, P337+P317, P370+P378, P403, and P501 (click each P-code to see the statement) Source: NITE-CMC
  • Cosmetic Ingredient Review Finding(s): Safe in the present practices of use and concentration. Ingredient, concentration, and use information are available in documents discoverable at https://cir-reports.cir-safety.org Source: Cosmetic Ingredient Review (CIR)
  • Environmental Bioconcentration: An estimated BCF value of 1.1 was calculated for dimethyl succinate(SRC), using a measured log Kow of 0.35(1) and a recommended regression-derived equation(2). According to a classification scheme(3), this BCF value suggests that bioconcentration in aquatic organisms is low(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: TERRESTRIAL FATE: Based on a recommended classification scheme(1), an estimated Koc value of 37(SRC), determined from a measured log Kow of 0.35(2) and a recommended regression-derived equation(3), indicates that dimethyl succinate is expected to have very high mobility in soil(SRC). Volatilization of dimethyl succinate from moist soil surfaces(SRC) is not expected to be important given an estimated Henry's Law constant of 6.4X10-8 atm-cu m/mole(SRC), using a fragment constant estimation method(4). Based upon a group contribution method for predicting the probability and rate of aerobic biodegradation(5), dimethyl succinate has been estimated to be highly biodegraded with complete biodegradation occurring over a period of weeks(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: AQUATIC FATE: Based on a recommended classification scheme(1), an estimated Koc value of 37(SRC), determined from a measured log Kow of 0.35(2) and a recommended regression-derived equation(3), indicates that dimethyl succinate is not expected to adsorb to suspended solids and sediment in water(SRC). Dimethyl succinate is not expected to volatilize from water surfaces(3,SRC) based on an estimated Henry's Law constant of 6.4X10-8 atm-cu m/mole(SRC), developed using a fragment constant estimation method(4). According to a classification scheme(5), an estimated BCF value of 1.1(3,SRC), from a measured log Kow(2), suggests that bioconcentration in aquatic organisms is low(SRC). Based upon a group contribution method for predicting the probability and rate of aerobic biodegradation(6), dimethyl succinate has been estimated to be highly biodegraded with complete biodegradation occurring over a period of weeks(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), dimethyl succinate, which has an estimated vapor pressure of 0.46 mm Hg at 25 °C(2,SRC), is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase dimethyl succinate is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be about 14 days(3,SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Industry Uses: Adsorbent; Pigment; Adhesion/cohesion promoter; Intermediate; Processing aids, specific to petroleum production; Viscosity modifiers; Thickening agent; Not Known or Reasonably Ascertainable; Other; Solvent; Dispersing agent Source: EPA Chemical Data Reporting (CDR)

Mis en correspondance par: Existing checksum-valid CAS to unique PubChem CID match. Récupéré le: 2026-08-31. Ouvrir la fiche source

Les classifications scientifiques et les annotations de danger apportent du contexte et ne remplacent pas la décision réglementaire propre au marché indiquée ci-dessus.

Couverture des sources complémentaires et état des correspondances
SourceRésultatVérifié
EMBL-EBI ChEBICorrespondance exacte2026-08-31
NIH PubChem PUG-ViewCorrespondance exacte2026-08-31

Une absence de correspondance enregistrée est une preuve utile que la source a été vérifiée ; ce n’est pas l’affirmation que la substance n’existe pas ailleurs.

Récupéré depuis NIH PubChem le 2026-08-31 par correspondance CAS à somme de contrôle valide. Les propriétés chimiques ne remplacent pas la décision réglementaire de cette page.

Comment le CAS 106-65-0 est utilisé sur ce site

Le CAS 106-65-0 est l’identifiant du Chemical Abstracts Service utilisé pour rattacher cette page à une substance précise. Dans le jeu de données actuel, 0 fiche d’annexe de l’UE partage cet identifiant, ce qui vous aide à vérifier si la même substance apparaît dans un seul contexte réglementaire ou dans plusieurs.

Utilisez cette page lorsqu’une spécification fournisseur, une FDS ou un dossier de matière première vous donne le CAS 106-65-0 et que vous devez voir au même endroit toutes les fiches liées des annexes II à VI. Les cartes d’entrées ci-dessus sont le moyen le plus rapide d’accéder aux limites de concentration, aux avertissements, à l’annexe concernée et aux conditions par type de produit.