Zum Hauptinhalt springen
CAS 0 Einträge

CAS 106-65-0

CAS 106-65-0 entspricht 0 EU-Anhangseinträgen in den Anhängen II–VI der Verordnung (EG) Nr. 1223/2009.

Einträge zu CAS 106-65-0

0 insgesamt
Für diese CAS-Nummer wurden keine Einträge gefunden.

Chemische Identität und Eigenschaften

Chemische 2D-Struktur aus PubChem für CAS 106-65-0
CAS 106-65-0PubChem CID 7820

Dimethyl Succinate

Dimethyl succinate is a colorless liquid. (USCG, 1999) — CAMEO Chemicals

IUPAC-Name
dimethyl butanedioate
Summenformel
C6H10O4
Molekulargewicht
146.14 g/mol
Exakte Masse
146.05790880 Da
XLogP3
0,4
Topologische polare Oberfläche
52,6 Ų
Wasserstoffbrücken-Donoren
0
Wasserstoffbrücken-Akzeptoren
4
Kovalente Einheiten
1
Definierte Stereozentren
0

Auch bekannt als

DimethylsuccinateButanedioic acid, dimethyl esterSuccinic acid, dimethyl esterMethyl butanedioateFEMA No. 23961,4-dimethyl butanedioateButanedioic acid, 1,4-dimethyl esterNSC-52209
16 weitere gemeldete Namen
914I2127JRRefChem:134276203-419-9Methyl succinateSuccinic acid dimethyl esterDBE-4 dibasic esterSuccinic acid-dimethyl esterDBE-4Dimethyl ester of succinic acidCH3OC(O)CH2CH2C(O)OCH3Dimethyl 2,3-butanedioatedimethyl butane-1,4-dioateCAS-106-65-0CCRIS 4803HSDB 5370EINECS 203-419-9
Kennungen in externen Datenbanken

Belege aus weiteren wissenschaftlichen Datenbanken

EMBL-EBI ChEBI
Exakter KennungstrefferCHEBI:165393

Dimethyl succinate

Rezeptur
C6H10O4
Durchschnittsmasse
146.142 g/mol
Monoisotopische Masse
146.05791 Da
Formale Ladung
0
  • fatty acid methyl ester — is a (CHEBI:4986)
  • fatty acid methyl ester — is a (CHEBI:4986)
Weitere kuratierte Namen
dimethyl butanedioate
Querverweise aus dieser Quelle

Zugeordnet durch: Exact CAS cross-reference in the ChEBI compound record. Abgerufen: 2026-08-31. Quelleneintrag öffnen

NIH PubChem PUG-View
Exakter Kennungstreffer7820

Attributed physical-property, hazard, environmental and use annotations.

  • First Aid: EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.; SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.; INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) shou Quelle: CAMEO Chemicals
  • Note: This chemical does not meet GHS hazard criteria for 61.8% (730 of 1181) of all reports. Quelle: European Chemicals Agency (ECHA)
  • Signal: Warning Quelle: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H319 (36.4%): Causes serious eye irritation [Warning Serious eye damage/eye irritation] Quelle: European Chemicals Agency (ECHA)
  • Precautionary Statement Codes: P264+P265, P280, P305+P351+P338, and P337+P317 (click each P-code to see the statement) Quelle: European Chemicals Agency (ECHA)
  • ECHA C&L Notifications Summary: Aggregated GHS information provided per 1181 reports by companies from 9 notifications to the ECHA C&L Inventory.; Reported as not meeting GHS hazard criteria per 730 of 1181 reports by companies.; There are 7 notifications provided by 451 of 1181 reports by companies with hazard statement code(s).; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Quelle: European Chemicals Agency (ECHA)
  • Signal: Warning Quelle: NITE-CMC
  • GHS Hazard Statements: H227: Combustible liquid [Warning Flammable liquids]; H320: Causes eye irritation [Warning Serious eye damage/eye irritation]; H373: May causes damage to organs through prolonged or repeated exposure [Warning Specific target organ toxicity, repeated exposure]; H402: Harmful to aquatic life [Hazardous to the aquatic environment, acute hazard] Quelle: NITE-CMC
  • Precautionary Statement Codes: P210, P260, P264+P265, P273, P280, P305+P351+P338, P319, P337+P317, P370+P378, P403, and P501 (click each P-code to see the statement) Quelle: NITE-CMC
  • Cosmetic Ingredient Review Finding(s): Safe in the present practices of use and concentration. Ingredient, concentration, and use information are available in documents discoverable at https://cir-reports.cir-safety.org Quelle: Cosmetic Ingredient Review (CIR)
  • Environmental Bioconcentration: An estimated BCF value of 1.1 was calculated for dimethyl succinate(SRC), using a measured log Kow of 0.35(1) and a recommended regression-derived equation(2). According to a classification scheme(3), this BCF value suggests that bioconcentration in aquatic organisms is low(SRC). Quelle: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: TERRESTRIAL FATE: Based on a recommended classification scheme(1), an estimated Koc value of 37(SRC), determined from a measured log Kow of 0.35(2) and a recommended regression-derived equation(3), indicates that dimethyl succinate is expected to have very high mobility in soil(SRC). Volatilization of dimethyl succinate from moist soil surfaces(SRC) is not expected to be important given an estimated Henry's Law constant of 6.4X10-8 atm-cu m/mole(SRC), using a fragment constant estimation method(4). Based upon a group contribution method for predicting the probability and rate of aerobic biodegradation(5), dimethyl succinate has been estimated to be highly biodegraded with complete biodegradation occurring over a period of weeks(SRC). Quelle: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: AQUATIC FATE: Based on a recommended classification scheme(1), an estimated Koc value of 37(SRC), determined from a measured log Kow of 0.35(2) and a recommended regression-derived equation(3), indicates that dimethyl succinate is not expected to adsorb to suspended solids and sediment in water(SRC). Dimethyl succinate is not expected to volatilize from water surfaces(3,SRC) based on an estimated Henry's Law constant of 6.4X10-8 atm-cu m/mole(SRC), developed using a fragment constant estimation method(4). According to a classification scheme(5), an estimated BCF value of 1.1(3,SRC), from a measured log Kow(2), suggests that bioconcentration in aquatic organisms is low(SRC). Based upon a group contribution method for predicting the probability and rate of aerobic biodegradation(6), dimethyl succinate has been estimated to be highly biodegraded with complete biodegradation occurring over a period of weeks(SRC). Quelle: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), dimethyl succinate, which has an estimated vapor pressure of 0.46 mm Hg at 25 °C(2,SRC), is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase dimethyl succinate is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be about 14 days(3,SRC). Quelle: Hazardous Substances Data Bank (HSDB)
  • Industry Uses: Adsorbent; Pigment; Adhesion/cohesion promoter; Intermediate; Processing aids, specific to petroleum production; Viscosity modifiers; Thickening agent; Not Known or Reasonably Ascertainable; Other; Solvent; Dispersing agent Quelle: EPA Chemical Data Reporting (CDR)

Zugeordnet durch: Existing checksum-valid CAS to unique PubChem CID match. Abgerufen: 2026-08-31. Quelleneintrag öffnen

Wissenschaftliche Klassifizierungen und Gefahrenannotationen liefern Kontext und ersetzen nicht die oben gezeigte marktspezifische regulatorische Entscheidung.

Weitere Quellenabdeckung und Trefferstatus
QuelleErgebnisGeprüft
EMBL-EBI ChEBIExakter Treffer2026-08-31
NIH PubChem PUG-ViewExakter Treffer2026-08-31

Ein erfasster Nicht-Treffer ist ein nützlicher Beleg dafür, dass die Quelle geprüft wurde; er ist keine Behauptung, dass der Stoff anderswo nicht existiert.

Am 2026-08-31 von NIH PubChem durch prüfsummengültigen CAS-Abgleich abgerufen. Chemische Eigenschaften ersetzen nicht die regulatorische Entscheidung auf dieser Seite.

Wie CAS 106-65-0 auf dieser Website verwendet wird

CAS 106-65-0 ist die Kennung des Chemical Abstracts Service, mit der diese Seite einem bestimmten Stoff zugeordnet wird. Im aktuellen Datenbestand haben 0 EU-Anhangseinträge diese Kennung; so können Sie gegenprüfen, ob derselbe Stoff in einem oder in mehreren regulatorischen Zusammenhängen auftaucht.

Nutzen Sie diese Seite, wenn eine Lieferantenspezifikation, ein Sicherheitsdatenblatt oder ein Rohstoffdossier CAS 106-65-0 nennt und Sie alle verknüpften Einträge der Anhänge II–VI an einem Ort sehen möchten. Die Eintragskarten oben sind der schnellste Weg zu Konzentrationsgrenzen, Warnhinweisen, Anhangszuordnung und Produktartbedingungen.