Benzyl salicylate
Benzyl salicylate figure à l’annexe III et ne peut être utilisé que dans les conditions indiquées dans cette fiche.
Cette substance figure sur la liste de l’UE des allergènes de parfum qui doivent être nommés individuellement dans la liste des ingrédients, et non couverts par le mot « parfum », dès qu’ils dépassent 0,001 % dans un produit sans rinçage ou 0,01 % dans un produit rincé.
La déclaration est une obligation d’étiquetage au titre de l’article 19, et non une restriction d’usage. Voir la fiche de l’allergène
Détails de la fiche
Autres restrictions
The presence of the substance must be indicated in the list of ingredients referred to in Article 19(1)g when its concentration exceeds:
- 0.001% in leave-on products
- 0.01% in rinse-off products
Nom du glossaire INCI
Benzyl salicylate
Nom chimique
Benzyl salicylate
Informations réglementaires
Avis du SCCS
- Opinion concerning Essential Oils
- Opinion concerning Fragrance Allergy in Consumers - A Review of the Problem - Analysis of the need for appropriate Consumer Information and Identification of Consumer Allergens
- Opinion concerning the Interim Position on Fragrance Allergy
- Memorandum on the SCCNFP Opinion concerning Fragrance Allergy
- Opinion on Benzyl Salicylate (CAS No. 118-58-1, EC No. 204-262-9) preliminary version of 6-7 June 2023, final version of 26 October 2023 SCCS/1656/23.
Ingrédients identifiés
Allergène de parfum de l’UE
Cette substance est liée à une référence d’allergène de parfum de l’UE. Consultez l’entrée actuelle de l’annexe III pour le seuil de déclaration et les éventuelles conditions supplémentaires.
Données clés
Identité et propriétés chimiques

Benzyl Salicylate
Benzyl salicylate is a member of phenols and a benzoate ester. It is functionally related to a salicylic acid. — ChEBI
- Nom IUPAC
- benzyl 2-hydroxybenzoate
- Formule moléculaire
- C14H12O3
- Masse moléculaire
- 228.24 g/mol
- Masse exacte
- 228.078644241 Da
- XLogP3
- 3,2
- Surface polaire topologique
- 46,5 Ų
- Donneurs de liaisons hydrogène
- 1
- Accepteurs de liaisons hydrogène
- 3
- Unités covalentes
- 1
- Stéréocentres définis
- 0
Également connu sous le nom de
16 autres noms signalés
Identifiants de bases de données externes
- ChEBI:CHEBI:165211
- ChEMBL:CHEMBL460124
- EPA DTXSID:DTXSID1024598
- PubMed:39159849
- PubMed:27965148
- PubMed:26795242
- PubMed:22458642
- PubMed:22197706
- PubMed:21818364
- PubMed:21429641
- PubMed:21126078
- PubMed:20652544
- PubMed:20495907
- PubMed:20235136
- PubMed:20030880
Preuves issues de bases de données scientifiques complémentaires
NIH PubChem PUG-View
Attributed physical-property, hazard, environmental and use annotations.
- Boiling Point: 406 °F at 26 mmHg (NTP, 1992) Source: CAMEO Chemicals
- Boiling Point: 320 °C Source: Hazardous Substances Data Bank (HSDB)
- Boiling Point: BP: 211 °C at 2.67 kPa Source: Hazardous Substances Data Bank (HSDB)
- Boiling Point: 208.00 °C. @ 26.00 mm Hg Source: Human Metabolome Database (HMDB)
- Boiling Point: 300 °C Source: Joint FAO/WHO Expert Committee on Food Additives (JECFA)
- Color/Form: Thick liquid Source: Hazardous Substances Data Bank (HSDB)
- Color/Form: Colorless liquid Source: Hazardous Substances Data Bank (HSDB)
- Density: 1.175 at 68 °F (NTP, 1992) - Denser than water; will sink Source: CAMEO Chemicals
- Density: 1.175 g/m cu at 20 °C Source: Hazardous Substances Data Bank (HSDB)
- Density: 1.173-1.183 Source: Joint FAO/WHO Expert Committee on Food Additives (JECFA)
- Flash Point: 180 °C (356 °F) - closed cup Source: Hazardous Substances Data Bank (HSDB)
- Flash Point: >212 °F (>100 °C) - closed cup Source: Hazardous Substances Data Bank (HSDB)
- Melting Point: 75 °F (NTP, 1992) Source: CAMEO Chemicals
- Melting Point: 24 °C Source: Hazardous Substances Data Bank (HSDB)
- Melting Point: 23.4 °C Source: Human Metabolome Database (HMDB)
- Odor: Faint sweet odor Source: Hazardous Substances Data Bank (HSDB)
- Physical Description: Benzyl salicylate is a colorless liquid. Melting point near room temperature (18-20 °C). (NTP, 1992) Source: CAMEO Chemicals
- Physical Description: CBI; Other Solid; Liquid Source: EPA Chemical Data Reporting (CDR)
- Physical Description: Solid Source: Human Metabolome Database (HMDB)
- Physical Description: colourless oily liquid or opaque crystalline mass (tendency to supercool) with a faint, sweet, floral odour Source: Joint FAO/WHO Expert Committee on Food Additives (JECFA)
- Refractive Index: Index of Refraction: 1.580-1.581 Source: Hazardous Substances Data Bank (HSDB)
- Refractive Index: 1.573-1.584 Source: Joint FAO/WHO Expert Committee on Food Additives (JECFA)
- Solubility: Slightly soluble (NTP, 1992) Source: CAMEO Chemicals
- Solubility: In water, 8.8 mg/L at 20 °C, pH 6.8-7.1 /OECD Guideline 105 (Water Solubility)/ Source: Hazardous Substances Data Bank (HSDB)
- Solubility: Slightly soluble in water Source: Hazardous Substances Data Bank (HSDB)
- Solubility: Miscible with alcohol or ether Source: Hazardous Substances Data Bank (HSDB)
- Solubility: Soluble in 9 vols of 90% alcohol Source: Hazardous Substances Data Bank (HSDB)
- Solubility: insoluble in water, glycerol; soluble in organic solvents, oils Source: Joint FAO/WHO Expert Committee on Food Additives (JECFA)
- Solubility: miscible above 25� (in ethanol) Source: Joint FAO/WHO Expert Committee on Food Additives (JECFA)
- Vapor Pressure: 7.8X10-5 mm Hg at 25 °C /OECD Guideline 104 (Vapour Pressure Curve)/ Source: Hazardous Substances Data Bank (HSDB)
- First Aid: EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.; SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.; INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) shou Source: CAMEO Chemicals
- Signal: Warning Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
- GHS Hazard Statements: H317: May cause an allergic skin reaction [Warning Sensitization, Skin] Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
- Precautionary Statement Codes: P261, P272, P280, P302+P352, P321, P333+P317, P362+P364, and P501 (click each P-code to see the statement) Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
- Note: This chemical does not meet GHS hazard criteria for 0.4% (9 of 2207) of reports. Source: European Chemicals Agency (ECHA)
- Signal: Warning Source: European Chemicals Agency (ECHA)
- GHS Hazard Statements: H317 (99%): May cause an allergic skin reaction [Warning Sensitization, Skin]; H319 (76.2%): Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H411 (24.1%): Toxic to aquatic life with long lasting effects [Hazardous to the aquatic environment, long-term hazard]; H412 (68.4%): Harmful to aquatic life with long lasting effects [Hazardous to the aquatic environment, long-term hazard] Source: European Chemicals Agency (ECHA)
- Precautionary Statement Codes: P261, P264+P265, P272, P273, P280, P302+P352, P305+P351+P338, P321, P333+P317, P337+P317, P362+P364, P391, and P501 (click each P-code to see the statement) Source: European Chemicals Agency (ECHA)
- ECHA C&L Notifications Summary: Aggregated GHS information provided per 2207 reports by companies from 42 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Reported as not meeting GHS hazard criteria per 9 of 2207 reports by companies.; There are 41 notifications provided by 2198 of 2207 reports by companies with hazard statement code(s).; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Source: European Chemicals Agency (ECHA)
- Signal: Warning Source: NITE-CMC
- GHS Hazard Statements: H317: May cause an allergic skin reaction [Warning Sensitization, Skin]; H320: Causes eye irritation [Warning Serious eye damage/eye irritation]; H361: Suspected of damaging fertility or the unborn child [Warning Reproductive toxicity]; H401: Toxic to aquatic life [Hazardous to the aquatic environment, acute hazard]; H411: Toxic to aquatic life with long lasting effects [Hazardous to the aquatic environment, long-term hazard] Source: NITE-CMC
- Precautionary Statement Codes: P203, P261, P264+P265, P272, P273, P280, P302+P352, P305+P351+P338, P318, P321, P333+P317, P337+P317, P362+P364, P391, P405, and P501 (click each P-code to see the statement) Source: NITE-CMC
- Signal: Warning Source: Hazardous Chemical Information System (HCIS), Safe Work Australia
- NFPA Health Rating: 0 - Materials that, under emergency conditions, would offer no hazard beyond that of ordinary combustible materials. Source: Hazardous Substances Data Bank (HSDB)
- NFPA Fire Rating: 1 - Materials that must be preheated before ignition can occur. Materials require considerable preheating, under all ambient temperature conditions, before ignition and combustion can occur. Source: Hazardous Substances Data Bank (HSDB)
- NFPA Instability Rating: 0 - Materials that in themselves are normally stable, even under fire conditions. Source: Hazardous Substances Data Bank (HSDB)
- Cosmetic Ingredient Review Conclusion: The CIR Expert Panel concluded that Benzyl Salicylate is safe in cosmetics in the present practices of use and concentration described in this safety assessment when formulated to be non-irritating and non-sensitizing, which may be based on a quantitative risk assessment (QRA). Source: Cosmetic Ingredient Review (CIR)
- Cosmetic Ingredient Review Finding(s): Safe for use in cosmetics, with qualifications Source: Cosmetic Ingredient Review (CIR)
- Toxicity Summary: IDENTIFICATION AND USE: Benzyl salicylate is a thick colorless liquid. Benzyl salicylate is widely used in soap and cosmetic industry as fragrance; also effective in absorbing UV light, and can be used in protective sunscreen lotions. Benzyl salicylate is also used in deodorant sprays. HUMAN STUDIES: Benzyl salicylate has a very low potential to induce hypersensitivity or to elicit reactions presumably attributable to pre-existing sensitization. Estrogenic potential of benzyl salicylate was tested using an in vitro human estrogen receptor alpha(hERalpha)-coactivator recruiting assay. Benzyl salicylate showed obvious in vitro hERalpha agonistic activities and exhibited a higher estrogenic activity compared to bisphenol A. Estrogenic activity was also demonstrated in assays using the estrogen-responsive MCF7 human breast cancer cell line. ANIMAL STUDIES: Benzyl salicylate was not irritating in the isolated bovine cornea test. Erythema was observed in the rabbit skin test. Estrogenic potential of benzyl salicylate was tested using an in vivo immature rodent uterotrophic bioassay. The uterine weights were significantly increased in mice treated with 11.1, 33.3, 100 and 300 mg/kg/day be Source: Hazardous Substances Data Bank (HSDB)
- Environmental Bioconcentration: An estimated BCF of 320 was calculated in fish for benzyl salicylate(SRC), using an estimated log Kow of 4.31(1) and a regression-derived equation(1). According to a classification scheme(2), this BCF suggests the potential for bioconcentration in aquatic organisms is high(SRC). Source: Hazardous Substances Data Bank (HSDB)
- Environmental Fate: TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 3300(SRC), determined from a structure estimation method(2), indicates that benzyl salicylate is expected to have slight mobility in soil(SRC). Volatilization of benzyl salicylate from moist soil surfaces may be an important fate process(SRC) given an estimated Henry's Law constant of 2.7X10-6 atm-cu m/mole(SRC) derived from its vapor pressure, 7.8X10-5 mm Hg(3), and water solubility, 8.8 mg/L(3). However, adsorption to soil is expected to attenuate volatilization(SRC). Benzyl salicylate is not expected to volatilize from dry soil surfaces(SRC) based upon its vapor pressure(3). Utilizing the Manometric Respirometry test, 93% of the Theoretical BOD was reached in 4 weeks indicating that biodegradation is an important environmental fate process in soil(3). Source: Hazardous Substances Data Bank (HSDB)
- Environmental Fate: AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 3300(SRC), determined from a structure estimation method(2), indicates that benzyl salicylate is expected to adsorb to suspended solids and sediment(SRC). Volatilization from water surfaces may occur(3) based upon an estimated Henry's Law constant of 2.7X10-6 atm-cu m/mole(SRC) derived from its vapor pressure, 7.8X10-5 mm Hg(3), and water solubility, 8.8 mg/L(3). Using this Henry's Law constant and an estimation method(4), volatilization half-lives for a model river and model lake are 14 and 160 days, respectively(SRC). However, volatilization from water surfaces is expected to be attenuated by adsorption to suspended solids and sediment in the water column. According to a classification scheme(5), an estimated BCF of 320(SRC), from an estimated log Kow of 4.31(2) and a regression-derived equation(2), suggests the potential for bioconcentration in aquatic organisms is high(SRC). Utilizing the Manometric Respirometry test, 93% of the Theoretical BOD was reached in 4 weeks indicating that biodegradation is an important environmental fate process in water(3). Source: Hazardous Substances Data Bank (HSDB)
- Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), benzyl salicylate which has a vapor pressure of 7.8X10-5 mm Hg at 20 °C(2), will exist in both the vapor and particulate phases in the ambient atmosphere. Vapor-phase benzyl salicylate is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 22 hours(SRC), calculated from its rate constant of 1.7X10-11 cu cm/molecule-sec at 25 °C(SRC) that was derived using a structure estimation method(3). Particulate-phase benzyl salicylate may be removed from the air by wet and dry deposition(SRC). Benzyl salicylate contains chromophores that absorb at wavelengths >290 nm(4) and, therefore, may be susceptible to direct photolysis by sunlight(SRC). Source: Hazardous Substances Data Bank (HSDB)
- Consumer Uses: Other; Fragrance Source: EPA Chemical Data Reporting (CDR)
- Industry Uses: Other; Flavoring and nutrient; Fragrance Source: EPA Chemical Data Reporting (CDR)
- Cosmetic Ingredient Review Link: CIR ingredient: Benzyl Salicylate Source: Cosmetic Ingredient Review (CIR)
- Uses: As a fixer in perfumery; in sunscreen preparations. Source: Hazardous Substances Data Bank (HSDB)
- Uses: Perfume fixative, solvent for synthetic musk, sunscreening lotions, soap odorant Source: Hazardous Substances Data Bank (HSDB)
- Uses: Benzyl salicylate is used as a fixative and solvent for nitro musks and as a fragrance for detergents. Source: Hazardous Substances Data Bank (HSDB)
- Uses: Benzyl salicylate is widely used in soap and cosmetic industry as fragrance; also effective in absorbing UV light, and can be used in protective sunscreen lotions. Benzyl salicylate is also used in deodorant sprays. Source: Hazardous Substances Data Bank (HSDB)
- Uses: Reported uses (ppm):; Table: Reported uses (ppm): (Flavor and Extract Manufacturers' Association, 1994) [Table#8429] Source: Hazardous Substances Data Bank (HSDB)
Mis en correspondance par: Existing checksum-valid CAS to unique PubChem CID match. Récupéré le: 2026-08-31. Ouvrir la fiche source
Les classifications scientifiques et les annotations de danger apportent du contexte et ne remplacent pas la décision réglementaire propre au marché indiquée ci-dessus.
Couverture des sources complémentaires et état des correspondances
| Source | Résultat | Vérifié |
|---|---|---|
| NIH PubChem PUG-View | Correspondance exacte | 2026-08-31 |
Une absence de correspondance enregistrée est une preuve utile que la source a été vérifiée ; ce n’est pas l’affirmation que la substance n’existe pas ailleurs.
Récupéré depuis NIH PubChem le 2026-08-31 par correspondance CAS à somme de contrôle valide. Les propriétés chimiques ne remplacent pas la décision réglementaire de cette page.
Liens d’inventaire pour Benzyl salicylate
Fiches associées pour Benzyl salicylate
Les correspondances directes sont limitées pour cette fiche ; des entrées voisines de l’annexe III sont donc également affichées.
ISOEUGENOL
Citral; Geranial; Neral
Ce que signifie l’annexe III pour Benzyl salicylate
Benzyl salicylate est une substance soumise à restrictions en vertu de l’annexe III du règlement (CE) n° 1223/2009 relatif aux produits cosmétiques. Son utilisation dans les cosmétiques n’est autorisée que dans les conditions précises énoncées dans l’entrée ci-dessus, y compris les limites de concentration, les restrictions de type de produit et les mentions d’avertissement requises.
Lorsque cette substance entre dans une formulation, toutes les conditions — concentration maximale, champ d’application du produit et mentions d’avertissement — doivent être respectées simultanément. Le respect d’une condition ne dispense pas des autres.
Cette fiche est liée à 1 ingrédient de l’inventaire CosIng pour le recoupement des noms et des identifiants. La page fait également apparaître 12 fiches d’annexe associées présentant des identifiants, une logique d’annexe ou des schémas de dénomination qui se recoupent.
Liste de contrôle de conformité
- Consignez les conditions d’emploi dans le dossier d’information produit (DIP).
- Cette substance est un allergène de parfum réglementé. Déclarez-le sur l’étiquette par son nom INCI au-delà de 0,001 % dans les produits sans rinçage ou de 0,01 % dans les produits rincés.
Questions fréquentes
Note de source pour la fiche Benzyl salicylate de l’annexe III
Cette page résume une fiche de l’annexe III pour Benzyl salicylate à partir de documents publics de la Commission européenne sur les cosmétiques et ajoute les correspondances d’inventaire ou d’identifiants associées lorsqu’elles sont disponibles.
Utilisez cette page de fiche pour examiner les conditions de l’annexe III pour Benzyl salicylate, mais confirmez toute décision réglementaire finale auprès du libellé officiel en vigueur de l’annexe et des fichiers sources.
Outils et étapes suivantes
Vérifiez votre formule
Collez une liste INCI complète pour détecter Benzyl salicylate et d’autres fiches d’annexe de l’UE signalées en une seule passe.
Vérificateur INCIComparer des entrées
Comparez Benzyl salicylate côte à côte avec une autre fiche d’annexe pour examiner les différences de restrictions, de concentrations et d’annexe.
ComparerParcourir l’annexe
Consultez toutes les fiches de l’annexe III et comparez les conditions réglementaires entre les substances de cette annexe.
Ouvrir l’annexe III