Amyl cinnamal
2-Benzylideneheptanal
Amyl cinnamal figure à l’annexe III et ne peut être utilisé que dans les conditions indiquées dans cette fiche.
Cette substance figure sur la liste de l’UE des allergènes de parfum qui doivent être nommés individuellement dans la liste des ingrédients, et non couverts par le mot « parfum », dès qu’ils dépassent 0,001 % dans un produit sans rinçage ou 0,01 % dans un produit rincé.
La déclaration est une obligation d’étiquetage au titre de l’article 19, et non une restriction d’usage. Voir la fiche de l’allergène
Détails de la fiche
Autres restrictions
The presence of the substance must be indicated in the list of ingredients referred to in Article 19(1)g when its concentration exceeds:
- 0.001% in leave-on products
- 0.01% in rinse-off products
Nom du glossaire INCI
Amyl cinnamal
Nom chimique
2-Benzylideneheptanal
Informations réglementaires
Avis du SCCS
- Opinion concerning Essential Oils
- Opinion concerning Fragrance Allergy in Consumers - A Review of the Problem - Analysis of the need for appropriate Consumer Information and Identification of Consumer Allergens
- Opinion concerning the Interim Position on Fragrance Allergy
- Memorandum on the SCCNFP Opinion concerning Fragrance Allergy
Ingrédients identifiés
Allergène de parfum de l’UE
Cette substance est liée à une référence d’allergène de parfum de l’UE. Consultez l’entrée actuelle de l’annexe III pour le seuil de déclaration et les éventuelles conditions supplémentaires.
Données clés
Identité et propriétés chimiques

Amylcinnamaldehyde
Pentyl cinnamaldehyde is a member of cinnamaldehydes. — ChEBI
- Nom IUPAC
- 2-benzylideneheptanal
- Formule moléculaire
- C14H18O
- Masse moléculaire
- 202.29 g/mol
- Masse exacte
- 202.135765193 Da
- XLogP3
- 4,2
- Surface polaire topologique
- 17,1 Ų
- Donneurs de liaisons hydrogène
- 0
- Accepteurs de liaisons hydrogène
- 1
- Unités covalentes
- 1
- Stéréocentres définis
- 0
Également connu sous le nom de
11 autres noms signalés
Identifiants de bases de données externes
- ChEBI:CHEBI:196097
- ChEMBL:CHEMBL3183519
- EPA DTXSID:DTXSID8029157
- PubMed:26795242
- PubMed:20074740
- PubMed:18991702
- PubMed:17577350
- PubMed:15025500
- PubMed:11380544
- PubMed:11312644
Preuves issues de bases de données scientifiques complémentaires
NIH PubChem PUG-View
Attributed physical-property, hazard, environmental and use annotations.
- Boiling Point: 284 °C Source: Hazardous Substances Data Bank (HSDB)
- Boiling Point: 284-287 °C Source: Joint FAO/WHO Expert Committee on Food Additives (JECFA)
- Color/Form: Clear, yellow, oily liquid Source: Hazardous Substances Data Bank (HSDB)
- Density: 0.9711 g/cu cm at 20 °C Source: Hazardous Substances Data Bank (HSDB)
- Density: 0.962-0.969 Source: Joint FAO/WHO Expert Committee on Food Additives (JECFA)
- LogP: log Kow = 4.70 Source: Hazardous Substances Data Bank (HSDB)
- Odor: Jasmine-like odor Source: Hazardous Substances Data Bank (HSDB)
- Physical Description: CBI; Liquid Source: EPA Chemical Data Reporting (CDR)
- Physical Description: Pale yellowish liquid, strong floral odour suggestive of jasmine Source: Joint FAO/WHO Expert Committee on Food Additives (JECFA)
- Refractive Index: Index of Refraction: 1.5381 at 20 °C Source: Hazardous Substances Data Bank (HSDB)
- Refractive Index: 1.554-1.562 Source: Joint FAO/WHO Expert Committee on Food Additives (JECFA)
- Solubility: Soluble in acetone, carbon tetrachloride Source: Hazardous Substances Data Bank (HSDB)
- Solubility: Soluble in 6 volumes of 80% alcohol Source: Hazardous Substances Data Bank (HSDB)
- Solubility: Insoluble in water Source: Hazardous Substances Data Bank (HSDB)
- Solubility: insoluble in water Source: Joint FAO/WHO Expert Committee on Food Additives (JECFA)
- Solubility: miscible (in ethanol) Source: Joint FAO/WHO Expert Committee on Food Additives (JECFA)
- Carcinogen Classification: No indication of carcinogenicity to humans (not listed by IARC). Source: Toxin and Toxin Target Database (T3DB)
- Note: This chemical does not meet GHS hazard criteria for < 0.1% (1 of 2175) of reports. Source: European Chemicals Agency (ECHA)
- Signal: Warning Source: European Chemicals Agency (ECHA)
- GHS Hazard Statements: H317 (94.2%): May cause an allergic skin reaction [Warning Sensitization, Skin]; H411 (98.2%): Toxic to aquatic life with long lasting effects [Hazardous to the aquatic environment, long-term hazard] Source: European Chemicals Agency (ECHA)
- Precautionary Statement Codes: P261, P272, P273, P280, P302+P352, P321, P333+P317, P362+P364, P391, and P501 (click each P-code to see the statement) Source: European Chemicals Agency (ECHA)
- ECHA C&L Notifications Summary: Aggregated GHS information provided per 2175 reports by companies from 20 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Reported as not meeting GHS hazard criteria per 1 of 2175 reports by companies.; There are 19 notifications provided by 2174 of 2175 reports by companies with hazard statement code(s).; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Source: European Chemicals Agency (ECHA)
- Signal: Warning Source: NITE-CMC
- GHS Hazard Statements: H315: Causes skin irritation [Warning Skin corrosion/irritation]; H317: May cause an allergic skin reaction [Warning Sensitization, Skin]; H400: Very toxic to aquatic life [Warning Hazardous to the aquatic environment, acute hazard]; H410: Very toxic to aquatic life with long lasting effects [Warning Hazardous to the aquatic environment, long-term hazard] Source: NITE-CMC
- Precautionary Statement Codes: P261, P264, P272, P273, P280, P302+P352, P321, P332+P317, P333+P317, P362+P364, P391, and P501 (click each P-code to see the statement) Source: NITE-CMC
- Signal: Warning Source: Hazardous Chemical Information System (HCIS), Safe Work Australia
- GHS Hazard Statements: H315: Causes skin irritation [Warning Skin corrosion/irritation]; H317: May cause an allergic skin reaction [Warning Sensitization, Skin] Source: Hazardous Chemical Information System (HCIS), Safe Work Australia
- Precautionary Statement Codes: P261, P264, P272, P280, P302+P352, P321, P332+P317, P333+P317, P362+P364, and P501 (click each P-code to see the statement) Source: Hazardous Chemical Information System (HCIS), Safe Work Australia
- Environmental Bioconcentration: An estimated BCF of 586 was calculated in fish for alpha-amyl cinnamaldehyde(SRC), using a log Kow of 4.70(1) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests the potential for bioconcentration in aquatic organisms is high(SRC), provided the compound is not metabolized by the organism(SRC). Source: Hazardous Substances Data Bank (HSDB)
- Environmental Fate: TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 680(SRC), determined from a structure estimation method(2), indicates that alpha-amyl cinnamaldehyde is expected to have low mobility in soil(SRC). Volatilization of alpha-amyl cinnamaldehyde from moist soil surfaces is expected to be an important fate process(SRC) given an estimated Henry's Law constant of 7.8X10-6 atm-cu m/mole(SRC), using a fragment constant estimation method(1). alpha-Amyl cinnamaldehyde is not expected to volatilize from dry soil surfaces based upon an estimated vapor pressure of 0.00431 mm Hg(SRC), determined from a fragment constant method(1); however, alpha-amyl cinnamaldehyde does volatilize in its consumer use as a perfume in soaps and detergents(3). Biodegradation is expected to be an important fate process in soil based on results of various various screening test(SRC). alpha-Amyl cinnamaldehyde, present at 100 mg/L, reached 51% of its theoretical BOD in 4 weeks using an activated sludge inoculum at 30 mg/L in the Japanese MITI test(4). Using OECD Method 301B (CO2 evolution), alpha-amyl cinnamaldehyde had a 65% degradation in 28 days indicating it was readily biodegradable( Source: Hazardous Substances Data Bank (HSDB)
- Environmental Fate: AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 680(SRC), determined from a structure estimation method(2), indicates that alpha-amyl cinnamaldehyde is expected to adsorb to suspended solids and sediment(SRC). Volatilization from water surfaces is expected(3) based upon an estimated Henry's Law constant of 7.8X10-6 atm-cu m/mole(SRC), developed using a fragment constant estimation method(2). Using this Henry's Law constant and an estimation method(3), volatilization half-lives for a model river and model lake are 6.8 and 54 days, respectively(SRC). According to a classification scheme(4), an estimated BCF of 586(SRC), from a log Kow of 4.70(5), suggests the potential for bioconcentration in aquatic organisms is high(SRC). alpha-Amyl cinnamaldehyde is stable to hydrolysis in water(5); the aldehyde group has a potential to oxidize to carboxylic acid in water(5). Biodegradation is expected to be an important fate process in water based on results of various various screening test(SRC). alpha-Amyl cinnamaldehyde, present at 100 mg/L, reached 51% of its theoretical BOD in 4 weeks using an activated sludge inoculum at 30 mg/L in the Japanese MITI test(6). Usi Source: Hazardous Substances Data Bank (HSDB)
- Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), alpha-amyl cinnamaldehyde, which has an estimated vapor pressure of 0.00431 mm Hg at 25 °C(SRC), determined from a fragment constant method(2), is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase alpha-amyl cinnamaldehyde is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 7.2 hours(SRC), calculated from its rate constant of 5.4X10-11 cu cm/molecule-sec at 25 °C(SRC) that was derived using a structure estimation method(2). Vapor-phase alpha-amyl cinnamaldehyde is also degraded in the atmosphere by reaction with ozone(SRC); the half-life for this reaction in air is estimated to be 12.6 hours(SRC), calculated from its rate constant of 2.2X10-17 cu cm/molecule-sec at 25 °C(SRC) that was derived using a structure estimation method(2). Source: Hazardous Substances Data Bank (HSDB)
- Consumer Uses: Not Known or Reasonably Ascertainable; Fragrance Source: EPA Chemical Data Reporting (CDR)
- Industry Uses: Photosensitive agent; Fragrance; Flavoring and nutrient Source: EPA Chemical Data Reporting (CDR)
- Uses: Perfumery, flavoring Source: Hazardous Substances Data Bank (HSDB)
- Uses: Used extensively as a perfume for soap products Source: Hazardous Substances Data Bank (HSDB)
- Uses: Reported uses (ppm):; Table: Reported uses (ppm): (Flavor and Extract Manufacturers' Association, 1994) [Table#7942] Source: Hazardous Substances Data Bank (HSDB)
Mis en correspondance par: Existing checksum-valid CAS to unique PubChem CID match. Récupéré le: 2026-08-31. Ouvrir la fiche source
Les classifications scientifiques et les annotations de danger apportent du contexte et ne remplacent pas la décision réglementaire propre au marché indiquée ci-dessus.
Couverture des sources complémentaires et état des correspondances
| Source | Résultat | Vérifié |
|---|---|---|
| NIH PubChem PUG-View | Correspondance exacte | 2026-08-31 |
Une absence de correspondance enregistrée est une preuve utile que la source a été vérifiée ; ce n’est pas l’affirmation que la substance n’existe pas ailleurs.
Récupéré depuis NIH PubChem le 2026-08-31 par correspondance CAS à somme de contrôle valide. Les propriétés chimiques ne remplacent pas la décision réglementaire de cette page.
Liens d’inventaire pour Amyl cinnamal
Fiches associées pour Amyl cinnamal
Les correspondances directes sont limitées pour cette fiche ; des entrées voisines de l’annexe III sont donc également affichées.
BENZALKONIUM CHLORIDE / BENZALKONIUM BROMIDE / BENZALKONIUM SACCHARINATE
Citral; Geranial; Neral
ISOEUGENOL
Ce que signifie l’annexe III pour Amyl cinnamal
Amyl cinnamal est une substance soumise à restrictions en vertu de l’annexe III du règlement (CE) n° 1223/2009 relatif aux produits cosmétiques. Son utilisation dans les cosmétiques n’est autorisée que dans les conditions précises énoncées dans l’entrée ci-dessus, y compris les limites de concentration, les restrictions de type de produit et les mentions d’avertissement requises.
Lorsque cette substance entre dans une formulation, toutes les conditions — concentration maximale, champ d’application du produit et mentions d’avertissement — doivent être respectées simultanément. Le respect d’une condition ne dispense pas des autres.
Cette fiche est liée à 1 ingrédient de l’inventaire CosIng pour le recoupement des noms et des identifiants. La page fait également apparaître 12 fiches d’annexe associées présentant des identifiants, une logique d’annexe ou des schémas de dénomination qui se recoupent.
Liste de contrôle de conformité
- Consignez les conditions d’emploi dans le dossier d’information produit (DIP).
- Cette substance est un allergène de parfum réglementé. Déclarez-le sur l’étiquette par son nom INCI au-delà de 0,001 % dans les produits sans rinçage ou de 0,01 % dans les produits rincés.
Questions fréquentes
Note de source pour la fiche Amyl cinnamal de l’annexe III
Cette page résume une fiche de l’annexe III pour Amyl cinnamal à partir de documents publics de la Commission européenne sur les cosmétiques et ajoute les correspondances d’inventaire ou d’identifiants associées lorsqu’elles sont disponibles.
Utilisez cette page de fiche pour examiner les conditions de l’annexe III pour Amyl cinnamal, mais confirmez toute décision réglementaire finale auprès du libellé officiel en vigueur de l’annexe et des fichiers sources.
Outils et étapes suivantes
Vérifiez votre formule
Collez une liste INCI complète pour détecter Amyl cinnamal et d’autres fiches d’annexe de l’UE signalées en une seule passe.
Vérificateur INCIComparer des entrées
Comparez Amyl cinnamal côte à côte avec une autre fiche d’annexe pour examiner les différences de restrictions, de concentrations et d’annexe.
ComparerParcourir l’annexe
Consultez toutes les fiches de l’annexe III et comparez les conditions réglementaires entre les substances de cette annexe.
Ouvrir l’annexe III