Amyl cinnamal
2-Benzylideneheptanal
Amyl cinnamal ist in Anhang III aufgeführt und darf nur unter den in diesem Eintrag genannten Bedingungen verwendet werden.
Dieser Stoff steht auf der EU-Liste der Duftstoffallergene, die in der Inhaltsstoffliste einzeln genannt werden müssen und nicht durch das Wort „parfum“ abgedeckt sind, sobald sie in einem Produkt, das auf der Haut verbleibt, 0,001% oder in einem abzuspülenden Produkt 0,01% überschreiten.
Die Kennzeichnung ist eine Pflicht nach Artikel 19 und keine Verwendungsbeschränkung. Den Allergeneintrag ansehen
Eintragsdetails
Sonstige Beschränkungen
The presence of the substance must be indicated in the list of ingredients referred to in Article 19(1)g when its concentration exceeds:
- 0.001% in leave-on products
- 0.01% in rinse-off products
INCI-Glossarname
Amyl cinnamal
Chemische Bezeichnung
2-Benzylideneheptanal
Regulatorische Informationen
SCCS-Gutachten
- Opinion concerning Essential Oils
- Opinion concerning Fragrance Allergy in Consumers - A Review of the Problem - Analysis of the need for appropriate Consumer Information and Identification of Consumer Allergens
- Opinion concerning the Interim Position on Fragrance Allergy
- Memorandum on the SCCNFP Opinion concerning Fragrance Allergy
Identifizierte Inhaltsstoffe
EU-Duftstoffallergen
Dieser Stoff ist mit einer EU-Referenz zu Duftstoffallergenen verknüpft. Prüfen Sie den aktuellen Eintrag in Anhang III auf den Kennzeichnungsschwellenwert und etwaige zusätzliche Bedingungen.
Kerndaten
Chemische Identität und Eigenschaften

Amylcinnamaldehyde
Pentyl cinnamaldehyde is a member of cinnamaldehydes. — ChEBI
- IUPAC-Name
- 2-benzylideneheptanal
- Summenformel
- C14H18O
- Molekulargewicht
- 202.29 g/mol
- Exakte Masse
- 202.135765193 Da
- XLogP3
- 4,2
- Topologische polare Oberfläche
- 17,1 Ų
- Wasserstoffbrücken-Donoren
- 0
- Wasserstoffbrücken-Akzeptoren
- 1
- Kovalente Einheiten
- 1
- Definierte Stereozentren
- 0
Auch bekannt als
11 weitere gemeldete Namen
Kennungen in externen Datenbanken
- ChEBI:CHEBI:196097
- ChEMBL:CHEMBL3183519
- EPA DTXSID:DTXSID8029157
- PubMed:26795242
- PubMed:20074740
- PubMed:18991702
- PubMed:17577350
- PubMed:15025500
- PubMed:11380544
- PubMed:11312644
Belege aus weiteren wissenschaftlichen Datenbanken
NIH PubChem PUG-View
Attributed physical-property, hazard, environmental and use annotations.
- Boiling Point: 284 °C Quelle: Hazardous Substances Data Bank (HSDB)
- Boiling Point: 284-287 °C Quelle: Joint FAO/WHO Expert Committee on Food Additives (JECFA)
- Color/Form: Clear, yellow, oily liquid Quelle: Hazardous Substances Data Bank (HSDB)
- Density: 0.9711 g/cu cm at 20 °C Quelle: Hazardous Substances Data Bank (HSDB)
- Density: 0.962-0.969 Quelle: Joint FAO/WHO Expert Committee on Food Additives (JECFA)
- LogP: log Kow = 4.70 Quelle: Hazardous Substances Data Bank (HSDB)
- Odor: Jasmine-like odor Quelle: Hazardous Substances Data Bank (HSDB)
- Physical Description: CBI; Liquid Quelle: EPA Chemical Data Reporting (CDR)
- Physical Description: Pale yellowish liquid, strong floral odour suggestive of jasmine Quelle: Joint FAO/WHO Expert Committee on Food Additives (JECFA)
- Refractive Index: Index of Refraction: 1.5381 at 20 °C Quelle: Hazardous Substances Data Bank (HSDB)
- Refractive Index: 1.554-1.562 Quelle: Joint FAO/WHO Expert Committee on Food Additives (JECFA)
- Solubility: Soluble in acetone, carbon tetrachloride Quelle: Hazardous Substances Data Bank (HSDB)
- Solubility: Soluble in 6 volumes of 80% alcohol Quelle: Hazardous Substances Data Bank (HSDB)
- Solubility: Insoluble in water Quelle: Hazardous Substances Data Bank (HSDB)
- Solubility: insoluble in water Quelle: Joint FAO/WHO Expert Committee on Food Additives (JECFA)
- Solubility: miscible (in ethanol) Quelle: Joint FAO/WHO Expert Committee on Food Additives (JECFA)
- Carcinogen Classification: No indication of carcinogenicity to humans (not listed by IARC). Quelle: Toxin and Toxin Target Database (T3DB)
- Note: This chemical does not meet GHS hazard criteria for < 0.1% (1 of 2175) of reports. Quelle: European Chemicals Agency (ECHA)
- Signal: Warning Quelle: European Chemicals Agency (ECHA)
- GHS Hazard Statements: H317 (94.2%): May cause an allergic skin reaction [Warning Sensitization, Skin]; H411 (98.2%): Toxic to aquatic life with long lasting effects [Hazardous to the aquatic environment, long-term hazard] Quelle: European Chemicals Agency (ECHA)
- Precautionary Statement Codes: P261, P272, P273, P280, P302+P352, P321, P333+P317, P362+P364, P391, and P501 (click each P-code to see the statement) Quelle: European Chemicals Agency (ECHA)
- ECHA C&L Notifications Summary: Aggregated GHS information provided per 2175 reports by companies from 20 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Reported as not meeting GHS hazard criteria per 1 of 2175 reports by companies.; There are 19 notifications provided by 2174 of 2175 reports by companies with hazard statement code(s).; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Quelle: European Chemicals Agency (ECHA)
- Signal: Warning Quelle: NITE-CMC
- GHS Hazard Statements: H315: Causes skin irritation [Warning Skin corrosion/irritation]; H317: May cause an allergic skin reaction [Warning Sensitization, Skin]; H400: Very toxic to aquatic life [Warning Hazardous to the aquatic environment, acute hazard]; H410: Very toxic to aquatic life with long lasting effects [Warning Hazardous to the aquatic environment, long-term hazard] Quelle: NITE-CMC
- Precautionary Statement Codes: P261, P264, P272, P273, P280, P302+P352, P321, P332+P317, P333+P317, P362+P364, P391, and P501 (click each P-code to see the statement) Quelle: NITE-CMC
- Signal: Warning Quelle: Hazardous Chemical Information System (HCIS), Safe Work Australia
- GHS Hazard Statements: H315: Causes skin irritation [Warning Skin corrosion/irritation]; H317: May cause an allergic skin reaction [Warning Sensitization, Skin] Quelle: Hazardous Chemical Information System (HCIS), Safe Work Australia
- Precautionary Statement Codes: P261, P264, P272, P280, P302+P352, P321, P332+P317, P333+P317, P362+P364, and P501 (click each P-code to see the statement) Quelle: Hazardous Chemical Information System (HCIS), Safe Work Australia
- Environmental Bioconcentration: An estimated BCF of 586 was calculated in fish for alpha-amyl cinnamaldehyde(SRC), using a log Kow of 4.70(1) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests the potential for bioconcentration in aquatic organisms is high(SRC), provided the compound is not metabolized by the organism(SRC). Quelle: Hazardous Substances Data Bank (HSDB)
- Environmental Fate: TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 680(SRC), determined from a structure estimation method(2), indicates that alpha-amyl cinnamaldehyde is expected to have low mobility in soil(SRC). Volatilization of alpha-amyl cinnamaldehyde from moist soil surfaces is expected to be an important fate process(SRC) given an estimated Henry's Law constant of 7.8X10-6 atm-cu m/mole(SRC), using a fragment constant estimation method(1). alpha-Amyl cinnamaldehyde is not expected to volatilize from dry soil surfaces based upon an estimated vapor pressure of 0.00431 mm Hg(SRC), determined from a fragment constant method(1); however, alpha-amyl cinnamaldehyde does volatilize in its consumer use as a perfume in soaps and detergents(3). Biodegradation is expected to be an important fate process in soil based on results of various various screening test(SRC). alpha-Amyl cinnamaldehyde, present at 100 mg/L, reached 51% of its theoretical BOD in 4 weeks using an activated sludge inoculum at 30 mg/L in the Japanese MITI test(4). Using OECD Method 301B (CO2 evolution), alpha-amyl cinnamaldehyde had a 65% degradation in 28 days indicating it was readily biodegradable( Quelle: Hazardous Substances Data Bank (HSDB)
- Environmental Fate: AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 680(SRC), determined from a structure estimation method(2), indicates that alpha-amyl cinnamaldehyde is expected to adsorb to suspended solids and sediment(SRC). Volatilization from water surfaces is expected(3) based upon an estimated Henry's Law constant of 7.8X10-6 atm-cu m/mole(SRC), developed using a fragment constant estimation method(2). Using this Henry's Law constant and an estimation method(3), volatilization half-lives for a model river and model lake are 6.8 and 54 days, respectively(SRC). According to a classification scheme(4), an estimated BCF of 586(SRC), from a log Kow of 4.70(5), suggests the potential for bioconcentration in aquatic organisms is high(SRC). alpha-Amyl cinnamaldehyde is stable to hydrolysis in water(5); the aldehyde group has a potential to oxidize to carboxylic acid in water(5). Biodegradation is expected to be an important fate process in water based on results of various various screening test(SRC). alpha-Amyl cinnamaldehyde, present at 100 mg/L, reached 51% of its theoretical BOD in 4 weeks using an activated sludge inoculum at 30 mg/L in the Japanese MITI test(6). Usi Quelle: Hazardous Substances Data Bank (HSDB)
- Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), alpha-amyl cinnamaldehyde, which has an estimated vapor pressure of 0.00431 mm Hg at 25 °C(SRC), determined from a fragment constant method(2), is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase alpha-amyl cinnamaldehyde is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 7.2 hours(SRC), calculated from its rate constant of 5.4X10-11 cu cm/molecule-sec at 25 °C(SRC) that was derived using a structure estimation method(2). Vapor-phase alpha-amyl cinnamaldehyde is also degraded in the atmosphere by reaction with ozone(SRC); the half-life for this reaction in air is estimated to be 12.6 hours(SRC), calculated from its rate constant of 2.2X10-17 cu cm/molecule-sec at 25 °C(SRC) that was derived using a structure estimation method(2). Quelle: Hazardous Substances Data Bank (HSDB)
- Consumer Uses: Not Known or Reasonably Ascertainable; Fragrance Quelle: EPA Chemical Data Reporting (CDR)
- Industry Uses: Photosensitive agent; Fragrance; Flavoring and nutrient Quelle: EPA Chemical Data Reporting (CDR)
- Uses: Perfumery, flavoring Quelle: Hazardous Substances Data Bank (HSDB)
- Uses: Used extensively as a perfume for soap products Quelle: Hazardous Substances Data Bank (HSDB)
- Uses: Reported uses (ppm):; Table: Reported uses (ppm): (Flavor and Extract Manufacturers' Association, 1994) [Table#7942] Quelle: Hazardous Substances Data Bank (HSDB)
Zugeordnet durch: Existing checksum-valid CAS to unique PubChem CID match. Abgerufen: 2026-08-31. Quelleneintrag öffnen
Wissenschaftliche Klassifizierungen und Gefahrenannotationen liefern Kontext und ersetzen nicht die oben gezeigte marktspezifische regulatorische Entscheidung.
Weitere Quellenabdeckung und Trefferstatus
| Quelle | Ergebnis | Geprüft |
|---|---|---|
| NIH PubChem PUG-View | Exakter Treffer | 2026-08-31 |
Ein erfasster Nicht-Treffer ist ein nützlicher Beleg dafür, dass die Quelle geprüft wurde; er ist keine Behauptung, dass der Stoff anderswo nicht existiert.
Am 2026-08-31 von NIH PubChem durch prüfsummengültigen CAS-Abgleich abgerufen. Chemische Eigenschaften ersetzen nicht die regulatorische Entscheidung auf dieser Seite.
Verzeichnisverknüpfungen für Amyl cinnamal
Verwandte Einträge zu Amyl cinnamal
Für diesen Eintrag gibt es nur wenige direkte Treffer; daher werden auch nahe liegende Einträge aus Anhang III angezeigt.
BENZALKONIUM CHLORIDE / BENZALKONIUM BROMIDE / BENZALKONIUM SACCHARINATE
Citral; Geranial; Neral
Strontium peroxide
STRONTIUM HYDROXIDE
Trialkylamines, trialkanolamines and their salts
ISOEUGENOL
Monoalkylamines, monoalkanolamines and their salts
Amylcinnamyl alcohol
Was Anhang III für Amyl cinnamal bedeutet
Amyl cinnamal ist ein beschränkter Stoff nach Anhang III der EU-Kosmetikverordnung (EG) Nr. 1223/2009. Seine Verwendung in kosmetischen Mitteln ist nur unter den im obigen Eintrag genannten besonderen Bedingungen zulässig, einschließlich geltender Konzentrationsgrenzen, Beschränkungen der Produktart und erforderlicher Warnhinweise.
Wird dieser Stoff in einer Rezeptur verwendet, müssen alle Bedingungen – Höchstkonzentration, Produktbereich und Warnhinweise – gleichzeitig erfüllt sein. Die Einhaltung einer Bedingung hebt die anderen nicht auf.
Dieser Eintrag ist zum Abgleich von Namen und Kennungen mit 1 Inhaltsstoff des CosIng-Verzeichnisses verknüpft. Die Seite zeigt außerdem 12 verwandte Anhangseinträge mit überschneidenden Kennungen, Anhangslogik oder Namensmustern.
Compliance-Checkliste
- Dokumentieren Sie die Verwendungsbedingungen in der Produktinformationsdatei (PIF).
- Dieser Stoff ist ein regulierter Duftstoffallergen. Geben Sie ihn mit seinem INCI-Namen auf dem Etikett an, wenn er in Produkten, die auf der Haut verbleiben, in mehr als 0,001% oder in abzuspülenden Produkten in mehr als 0,01% enthalten ist.
Häufig gestellte Fragen
Quellenhinweis zu Anhang III, Eintrag Amyl cinnamal
Diese Seite fasst einen Eintrag aus Anhang III für Amyl cinnamal aus öffentlichen Materialien der Europäischen Kommission zu kosmetischen Mitteln zusammen und ergänzt, soweit verfügbar, verknüpfte Treffer aus dem Verzeichnis oder bei Kennungen.
Nutzen Sie diese Eintragsseite, um die Bedingungen aus Anhang III für Amyl cinnamal zu prüfen; bestätigen Sie jede endgültige regulatorische Entscheidung jedoch anhand des aktuellen amtlichen Anhangswortlauts und der Quelldateien.
Werkzeuge und nächste Schritte
Rezeptur prüfen
Fügen Sie eine vollständige INCI-Liste ein, um Amyl cinnamal und andere markierte EU-Anhangseinträge in einem Durchgang zu finden.
INCI-CheckerEinträge vergleichen
Amyl cinnamal nebeneinander mit einem anderen Anhangseintrag vergleichen, um Unterschiede bei Beschränkungen, Konzentrationen und Anhangszuordnung zu prüfen.
VergleichenDen Anhang durchsuchen
Alle Einträge in Anhang III ansehen und die regulatorischen Bedingungen der Stoffe in diesem Anhang vergleichen.
Anhang III öffnen