Aller au contenu principal
Annexe III Entrée 8b Modifiée 12 Fév 2014

p-Phenylenediamine; p-Phenylenediamine HCl; p-Phenylenediamine Sulphate

p- Phenylene-diamine and its salts

p-Phenylenediamine; p-Phenylenediamine HCl; p-Phenylenediamine Sulphate figure à l’annexe III et ne peut être utilisé que dans les conditions indiquées dans cette fiche.

Substance soumise à restrictions— Annexe III, Règlement (CE) n° 1223/2009
Entrée: 8b

Détails de la fiche

Autres restrictions

After mixing under oxidative conditions the maximum concentration applied to eyelashes must not exceed 2 % calculated as free base.
For professional use only.

Avertissements

To be printed on the label: The mixing ratio. “For professional use only. This product can cause severe allergic reactions. Read and follow instructions. This product is not intended for use on persons under the age of 16. Temporary ‘black henna’ tattoos may increase the risk of allergy. Eyelashes shall not be coloured if the consumer: — has a rash on the face or sensitive, irritated and damaged scalp, — has experienced any reaction after colouring hair or eyelashes, — has experienced a reaction to a temporary ‘black henna’ tattoo in the past. Rinse eyes immediately if product comes into contact with them. Contains phenylenediamines. Wear suitable gloves.” ’

Nom du glossaire INCI

p-Phenylenediamine; p-Phenylenediamine HCl; p-Phenylenediamine Sulphate

Nom chimique

p- Phenylene-diamine and its salts

Nom chimique / IUPAC

p- Phenylene-diamine and its salts

Informations réglementaires

Données clés

CAS
106-50-3 / 624-18-0 / 16245-77-5
EC
203-404-7 / 210-834-9 / 240-357-1
Annexe
Numéro d’entrée
8b

Identité et propriétés chimiques

Structure chimique 2D PubChem pour le CAS 106-50-3
CAS 106-50-3PubChem CID 7814

P-Phenylenediamine

1,4-phenylenediamine is a phenylenediamine in which the amino functions are at positions 1 and 4 of the benzene nucleus. It has a role as a reagent, a dye, an allergen and a hapten. — ChEBI

Nom IUPAC
benzene-1,4-diamine
Formule moléculaire
C6H8N2
Masse moléculaire
108.14 g/mol
Masse exacte
108.068748264 Da
XLogP3
-0,3
Surface polaire topologique
52,0 Ų
Donneurs de liaisons hydrogène
2
Accepteurs de liaisons hydrogène
2
Unités covalentes
1
Stéréocentres définis
0

Également connu sous le nom de

1,4-BENZENEDIAMINE1,4-Diaminobenzene1,4-Phenylenediamine4-Aminoanilinepara-phenylenediaminep-Aminoanilinep-DiaminobenzeneOrsin
16 autres noms signalés
ParaphenylenediamineUrsol D4-Phenylenediaminep-BenzenediamineFouramine DFutramine DBenzofur DDeveloper PFFourrine DFur YellowSantoflex ICSantoflex LCDurafur Black RPelagol DTertral DPelagol DR
Identifiants de bases de données externes

Preuves issues de bases de données scientifiques complémentaires

EMBL-EBI ChEBI
Correspondance exacte d’identifiantCHEBI:51403

1,4-phenylenediamine

A phenylenediamine in which the amino functions are at positions 1 and 4 of the benzene nucleus.

Formule
C6H8N2
Masse moyenne
108.144 g/mol
Masse monoisotopique
108.06875 Da
Charge formelle
0
  • phenylenediamine — is a (CHEBI:51402)
  • dye — has role (CHEBI:37958)
  • reagent — has role (CHEBI:33893)
  • allergen — has role (CHEBI:50904)
  • hapten — has role (CHEBI:59174)
  • dye — has role (CHEBI:37958)
  • reagent — has role (CHEBI:33893)
  • allergen — has role (CHEBI:50904)
  • hapten — has role (CHEBI:59174)
  • phenylenediamine — is a (CHEBI:51402)
Noms supplémentaires validés
benzene-1,4-diamine1,4-Benzenediamine1,4-diaminobenzene4-Aminoaniline4-phenylenediaminepara-phenylenediamineparaphenylene-diamineparaphenylenediaminep-DiaminobenzenePPDpPDAPPDAp-Phenylenediaminep-phenylenediamine base
Références croisées de cette source

Mis en correspondance par: Exact CAS cross-reference in the ChEBI compound record. Source mise à jour le: 2024-03-05. Récupéré le: 2026-08-31. Ouvrir la fiche source

NIH PubChem PUG-View
Correspondance exacte d’identifiant7814

Attributed physical-property, hazard, environmental and use annotations.

  • First Aid: EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.; SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.; INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) shou Source: CAMEO Chemicals
  • First Aid: (General first aid procedures); Eye: Irrigate immediately - If this chemical contacts the eyes, immediately wash (irrigate) the eyes with large amounts of water, occasionally lifting the lower and upper lids. Get medical attention immediately.; Skin: Soap wash promptly - If this chemical contacts the skin, promptly wash the contaminated skin with soap and water. If this chemical penetrates the clothing, promptly remove the clothing and wash the skin with soap and water. Get medical attention promptly.; Breathing: Respiratory support; Swallow: Medical attention immediately - If this chemical has been swallowed, get medical attention immediately. Source: The National Institute for Occupational Safety and Health (NIOSH)
  • Signal: Danger Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • GHS Hazard Statements: H301: Toxic if swallowed [Danger Acute toxicity, oral]; H311: Toxic in contact with skin [Danger Acute toxicity, dermal]; H317: May cause an allergic skin reaction [Warning Sensitization, Skin]; H319: Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H331: Toxic if inhaled [Danger Acute toxicity, inhalation]; H400: Very toxic to aquatic life [Warning Hazardous to the aquatic environment, acute hazard]; H410: Very toxic to aquatic life with long lasting effects [Warning Hazardous to the aquatic environment, long-term hazard] Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Precautionary Statement Codes: P261, P262, P264, P264+P265, P270, P271, P272, P273, P280, P301+P316, P302+P352, P304+P340, P305+P351+P338, P316, P321, P330, P333+P317, P337+P317, P361+P364, P362+P364, P391, P403+P233, P405, and P501 (click each P-code to see the statement) Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Signal: Danger Source: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H301+H311+H331 (43.2%): Toxic if swallowed, in contact with skin or if inhaled [Danger Acute toxicity, oral; acute toxicity, dermal; acute toxicity, inhalation]; H301 (99.7%): Toxic if swallowed [Danger Acute toxicity, oral]; H311 (99.7%): Toxic in contact with skin [Danger Acute toxicity, dermal]; H317 (99.8%): May cause an allergic skin reaction [Warning Sensitization, Skin]; H319 (99.7%): Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H331 (99.7%): Toxic if inhaled [Danger Acute toxicity, inhalation]; H370 (38.9%): Causes damage to organs [Danger Specific target organ toxicity, single exposure]; H400 (98.3%): Very toxic to aquatic life [Warning Hazardous to the aquatic environment, acute hazard]; H410 (99.7%): Very toxic to aquatic life with long lasting effects [Warning Hazardous to the aquatic environment, long-term hazard] Source: European Chemicals Agency (ECHA)
  • Precautionary Statement Codes: P260, P261, P262, P264, P264+P265, P270, P271, P272, P273, P280, P301+P316, P302+P352, P304+P340, P305+P351+P338, P308+P316, P316, P321, P330, P333+P317, P337+P317, P361+P364, P362+P364, P391, P403+P233, P405, and P501 (click each P-code to see the statement) Source: European Chemicals Agency (ECHA)
  • ECHA C&L Notifications Summary: Aggregated GHS information provided per 597 reports by companies from 32 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Source: European Chemicals Agency (ECHA)
  • Signal: Danger Source: NITE-CMC
  • GHS Hazard Statements: H301: Toxic if swallowed [Danger Acute toxicity, oral]; H317: May cause an allergic skin reaction [Warning Sensitization, Skin]; H320: Causes eye irritation [Warning Serious eye damage/eye irritation]; H331: Toxic if inhaled [Danger Acute toxicity, inhalation]; H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled [Danger Sensitization, respiratory]; H370: Causes damage to organs [Danger Specific target organ toxicity, single exposure]; H372: Causes damage to organs through prolonged or repeated exposure [Danger Specific target organ toxicity, repeated exposure]; H400: Very toxic to aquatic life [Warning Hazardous to the aquatic environment, acute hazard]; H410: Very toxic to aquatic life with long lasting effects [Warning Hazardous to the aquatic environment, long-term hazard] Source: NITE-CMC
  • Precautionary Statement Codes: P233, P260, P261, P264, P264+P265, P270, P271, P272, P273, P280, P284, P301+P316, P302+P352, P304+P340, P305+P351+P338, P308+P316, P316, P319, P321, P330, P333+P317, P337+P317, P342+P316, P362+P364, P391, P403, P403+P233, P405, and P501 (click each P-code to see the statement) Source: NITE-CMC
  • GHS Hazard Statements: H301: Toxic if swallowed [Danger Acute toxicity, oral]; H315: Causes skin irritation [Warning Skin corrosion/irritation]; H317: May cause an allergic skin reaction [Warning Sensitization, Skin]; H320: Causes eye irritation [Warning Serious eye damage/eye irritation]; H331: Toxic if inhaled [Danger Acute toxicity, inhalation]; H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled [Danger Sensitization, respiratory]; H370: Causes damage to organs [Danger Specific target organ toxicity, single exposure]; H372: Causes damage to organs through prolonged or repeated exposure [Danger Specific target organ toxicity, repeated exposure]; H373: May causes damage to organs through prolonged or repeated exposure [Warning Specific target organ toxicity, repeated exposure]; H400: Very toxic to aquatic life [Warning Hazardous to the aquatic environment, acute hazard]; H410: Very toxic to aquatic life with long lasting effects [Warning Hazardous to the aquatic environment, long-term hazard] Source: NITE-CMC
  • Precautionary Statement Codes: P233, P260, P261, P264, P264+P265, P270, P271, P272, P273, P280, P284, P301+P316, P302+P352, P304+P340, P305+P351+P338, P308+P316, P316, P319, P321, P330, P332+P317, P333+P317, P337+P317, P342+P316, P362+P364, P391, P403, P403+P233, P405, and P501 (click each P-code to see the statement) Source: NITE-CMC
  • Cosmetic Ingredient Review Finding(s): Safe in the present practices of use and concentration. Ingredient, concentration, and use information are available in documents discoverable at https://cir-reports.cir-safety.org Source: Cosmetic Ingredient Review (CIR)
  • Environmental Bioconcentration: An estimated BCF value of 0.3 was calculated for 1,4-benzenediamine(SRC), using a measured log Kow of -0.3(1,SRC) and a recommended regression-derived equation(2). According to a classification scheme(3), this BCF value suggests that bioconcentration in aquatic organisms is low(SRC). An experimental BCF value of 450 was measured for algae exposed to 1,4-diaminobenzene dihydrochloride for 24 hours(4). An experimental BCF value of 6 was measured for fish (golden ide) exposed to 1,4-diaminobenzene dihydrochloride for 3 days(4). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: TERRESTRIAL FATE: Based on a recommended classification scheme(1), an estimated Koc value of 16(SRC), determined from a measured log Kow of -0.30(2), and a recommended regression-derived equation(3), indicates that 1,4-benzenediamine is expected to have high mobility in soil(SRC); however it may form covalent bonds to humic material which would limit movement through soil(4). Volatilization of 1,4-benzenediamine is not expected from moist soil surfaces(SRC) given an estimated Henry's Law constant of 6.7X10-10 atm-cu m/mole(SRC), using a fragment constant estimation method(5). Volatilization of 1,4-benzenediamine from dry soil surfaces is not expected(SRC) based on an extrapolated vapor pressure of 0.005 mm Hg(SRC) at 25 °C(6). Biodegradation is expected to occur slowly in soils based on standard biodegradability tests conducted with activated sludge(7-11). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: AQUATIC FATE: Based on a recommended classification scheme(1), an estimated Koc value of 16(SRC), determined from a measured log Kow of -0.30(2), and a recommended regression-derived equation(3), indicates that 1,4-benzenediamine is not expected to adsorb to suspended solids and sediment in water(SRC). 1,4-benzenediamine is not expected to volatilize from water surfaces(3,SRC) based on an estimated Henry's Law constant of 6.7X10-10 atm-cu m/mole(SRC), developed using a fragment constant estimation method(4). Degradation of 1,4-benzenediamine by photochemically produced peroxy radicals will be an important environmental fate process in surface waters(5,SRC). The half-life of this reaction is estimated as 1 day for a solution concentration of 1X10-9 M of peroxy radicals and an estimated rate constant of 1X10+4 L/mol-s(5). According to a classification scheme(6), an estimated BCF value of 0.3(3,SRC), from a measured log Kow of -0.3(2,SRC), suggests that bioconcentration in aquatic organisms is low(SRC). Biodegradation in aquatic environments is not expected to be an important environmental fate process(SRC). A 0% theoretical oxygen demand was observed for 1,4-benzenediamine in a Warbu Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), 1,4-benzenediamine, which has an extrapolated vapor pressure of 0.005 mm Hg at 25 °C(2,SRC), is expected to exist primarily as a vapor in the ambient atmosphere. Vapor-phase 1,4-benzenediamine is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be about 2 hours(3,SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Cosmetic Ingredient Review Link: CIR ingredient: p-Phenylenediamine Source: Cosmetic Ingredient Review (CIR)
  • Uses: p-Phenylenediamine is primarily used as a dye intermediate and as a dye (e.g., hair dyes and dyes used for dyeing furs), as well as a photographic developing agent and a chemical intermediate. p-Phenylenediamine is also used as a vulcanization accelerator and as an antioxidant in rubber compounds. Source: EPA Hazardous Air Pollutants
  • Sources/Uses: Used to dye hair and fur; also used to develop photographs and to synthesize other organic compounds; [ACGIH] Occupational asthma reported in fur dyers; [Malo] Allergic contact dermatitis in hairdressers, mechanics, printers, and textile workers; [Marks] Used to dye leather; [PMID 21938525] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Industrial Processes with risk of exposure: Leather Tanning and Processing [Category: Industry]; Photographic Processing [Category: Other]; Fur Dressing and Dyeing [Category: Industry]; Textiles (Printing, Dyeing, or Finishing) [Category: Industry]; Dressing Hair [Category: Other] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Uses: Dyeing furs; also in photochemical measurements, accelerating vulcanization; manuf azo dyes. Source: Hazardous Substances Data Bank (HSDB)
  • Uses: CHEM INT FOR DYES (EG, DIRECT BLACK 19, 78 & 80); OXIDN BASE 10 & DEVELOPER 13 FOR DYES; CHEM INT FOR ARAMID FIBERS (USED IN TIRE CORD); CHEM INT FOR N,N'-DISUBSTITUTED-P-PHENYLENEDIAMINES; COMPONENT OF GASOLINE ANTIOXIDANTS. Source: Hazardous Substances Data Bank (HSDB)
  • Uses: Used as an intermediate for the manufacture of diisocyanates for polyurethane Source: Hazardous Substances Data Bank (HSDB)
  • Uses: Substance listed with specific concentration in tattoo ink and/or permanent make up according to EU Commission Regulation 2020/2081. The concentration limit (by weight) is 0.0005%. Source: NORMAN Suspect List Exchange

Mis en correspondance par: Existing checksum-valid CAS to unique PubChem CID match. Récupéré le: 2026-08-31. Ouvrir la fiche source

Les classifications scientifiques et les annotations de danger apportent du contexte et ne remplacent pas la décision réglementaire propre au marché indiquée ci-dessus.

Couverture des sources complémentaires et état des correspondances
SourceRésultatVérifié
EMBL-EBI ChEBICorrespondance exacte2026-08-31
NIH PubChem PUG-ViewCorrespondance exacte2026-08-31

Une absence de correspondance enregistrée est une preuve utile que la source a été vérifiée ; ce n’est pas l’affirmation que la substance n’existe pas ailleurs.

Récupéré depuis NIH PubChem le 2026-08-31 par correspondance CAS à somme de contrôle valide. Les propriétés chimiques ne remplacent pas la décision réglementaire de cette page.

Structure chimique 2D PubChem pour le CAS 16245-77-5
CAS 16245-77-5PubChem CID 27769

1,4-Benzenediamine sulfate

Nom IUPAC
benzene-1,4-diamine;sulfuric acid
Formule moléculaire
C6H10N2O4S
Masse moléculaire
206.22 g/mol
Masse exacte
206.03612798 Da
Surface polaire topologique
135,0 Ų
Donneurs de liaisons hydrogène
4
Accepteurs de liaisons hydrogène
6
Unités covalentes
2
Stéréocentres définis
0

Également connu sous le nom de

p-Phenylenediamine sulfate1,4-Benzenediamine, sulfate (1:1)1,4-Benzenediamine, sulfateUNII-S7IGM30961HSDB 6256EINECS 240-357-1COVASTYLE PPDSCOLOREX PPDS
16 autres noms signalés
1,4-Benzenediamine sulfate (1:1)1,4-BENZENEDIAMINE SULFATE [HSDB]pPhenylenediamine sulfateRefChem:73044Benzene1,4diammonium sulphateP-PHENYLENEDIAMINE SULFATE [INCI]240-357-11,4-Phenylenediamine Sulfate1,4-Diaminobenzene SulfateBenzene-1,4-diammonium sulphateS7IGM30961UFPKLWVNKAMAPE-UHFFFAOYSA-NBS-42135DB-043524DB-071285P0175
Identifiants de bases de données externes

Récupéré depuis NIH PubChem le 2026-09-02 par correspondance CAS à somme de contrôle valide. Les propriétés chimiques ne remplacent pas la décision réglementaire de cette page.

Structure chimique 2D PubChem pour le CAS 624-18-0
CAS 624-18-0PubChem CID 12205

1,4-Diaminobenzene dihydrochloride

1,4-phenylenediamine dihydrochloride appears as white to slightly reddish crystals or gray powder. (NTP, 1992) — CAMEO Chemicals

Nom IUPAC
benzene-1,4-diamine;dihydrochloride
Formule moléculaire
C6H10Cl2N2
Masse moléculaire
181.06 g/mol
Masse exacte
180.0221037 Da
Surface polaire topologique
52,0 Ų
Donneurs de liaisons hydrogène
4
Accepteurs de liaisons hydrogène
2
Unités covalentes
3
Stéréocentres définis
0

Également connu sous le nom de

p-Phenylenediamine dihydrochloride1,4-Phenylenediamine dihydrochloridebenzene-1,4-diamine dihydrochlorideFourrine DSPelagol Grey CDDurafur Black RCFourrine 641,4-Benzenediamine dihydrochloride
16 autres noms signalés
p-PD HClp-Phenylenediamine HClPelagol CD1,4-Benzenediamine, dihydrochloridep-Pda HClOxidation Base 10AC.I. Oxidation Base 10A4-Aminoaniline dihydrochloridep-Benzenediamine dihydrochloridep-Diaminobenzene dihydrochlorideCI Oxidation Base 10ANCI-C03930p-Phenylenediamine, dihydrochloridep-Aminoaniline dihydrochlorideCCRIS 510Phenylenediamine dihydrochloride
Identifiants de bases de données externes

Récupéré depuis NIH PubChem le 2026-09-02 par correspondance CAS à somme de contrôle valide. Les propriétés chimiques ne remplacent pas la décision réglementaire de cette page.

Liens d’inventaire pour p-Phenylenediamine; p-Phenylenediamine HCl; p-Phenylenediamine Sulphate

Annexe III 22
Type de produit commun

RESORCINOL

CAS: 108-46-3
EC: 203-585-2

Ce que signifie l’annexe III pour p-Phenylenediamine; p-Phenylenediamine HCl; p-Phenylenediamine Sulphate

p-Phenylenediamine; p-Phenylenediamine HCl; p-Phenylenediamine Sulphate est une substance soumise à restrictions en vertu de l’annexe III du règlement (CE) n° 1223/2009 relatif aux produits cosmétiques. Son utilisation dans les cosmétiques n’est autorisée que dans les conditions précises énoncées dans l’entrée ci-dessus, y compris les limites de concentration, les restrictions de type de produit et les mentions d’avertissement requises.

Lorsque cette substance entre dans une formulation, toutes les conditions — concentration maximale, champ d’application du produit et mentions d’avertissement — doivent être respectées simultanément. Le respect d’une condition ne dispense pas des autres.

Cette fiche est liée à 3 ingrédients de l’inventaire CosIng pour le recoupement des noms et des identifiants. La page fait également apparaître 12 fiches d’annexe associées présentant des identifiants, une logique d’annexe ou des schémas de dénomination qui se recoupent.

Liste de contrôle de conformité

  • Confirmez la compatibilité avec le type de produit : Products intended for colouring eyelashes
  • Faites figurer la mention d’avertissement requise sur l’étiquette du produit.
  • Consignez les conditions d’emploi dans le dossier d’information produit (DIP).

Questions fréquentes

p-Phenylenediamine; p-Phenylenediamine HCl; p-Phenylenediamine Sulphate figure à l’annexe III du règlement (CE) n° 1223/2009 comme substance soumise à restrictions. Il ne peut être utilisé que dans les conditions précisées dans l’entrée, y compris toute concentration maximale, limitation de type de produit et mention d’avertissement requise indiquées ci-dessus.

Le CAS 106-50-3 / 624-18-0 / 16245-77-5 est l’identifiant numérique unique attribué à p-Phenylenediamine; p-Phenylenediamine HCl; p-Phenylenediamine Sulphate par le Chemical Abstracts Service. Dans les travaux de conformité cosmétique, le numéro CAS sert à recouper la substance entre les bases de données réglementaires, les spécifications de matières premières et les rapports d’évaluation de la sécurité. Plusieurs entrées d’annexe de l’UE peuvent partager le même numéro CAS si la même substance apparaît dans des conditions différentes ou dans des annexes différentes.

Utilisez l’outil Vérificateur INCI de ce site pour coller votre liste complète d’ingrédients (INCI) et l’analyser par rapport à toutes les entrées des annexes II à VI. L’outil met en évidence les ingrédients correspondant à des fiches soumises à restrictions, interdites ou signalées comme allergènes. C’est utile pour un contrôle rapide de conformité des formules de produits finis ou des déclarations de matières premières.

Note de source pour la fiche p-Phenylenediamine; p-Phenylenediamine HCl; p-Phenylenediamine Sulphate de l’annexe III

Cette page résume une fiche de l’annexe III pour p-Phenylenediamine; p-Phenylenediamine HCl; p-Phenylenediamine Sulphate à partir de documents publics de la Commission européenne sur les cosmétiques et ajoute les correspondances d’inventaire ou d’identifiants associées lorsqu’elles sont disponibles.

Utilisez cette page de fiche pour examiner les conditions de l’annexe III pour p-Phenylenediamine; p-Phenylenediamine HCl; p-Phenylenediamine Sulphate, mais confirmez toute décision réglementaire finale auprès du libellé officiel en vigueur de l’annexe et des fichiers sources.

Outils et étapes suivantes

Vérifiez votre formule

Collez une liste INCI complète pour détecter p-Phenylenediamine; p-Phenylenediamine HCl; p-Phenylenediamine Sulphate et d’autres fiches d’annexe de l’UE signalées en une seule passe.

Vérificateur INCI

Comparer des entrées

Comparez p-Phenylenediamine; p-Phenylenediamine HCl; p-Phenylenediamine Sulphate côte à côte avec une autre fiche d’annexe pour examiner les différences de restrictions, de concentrations et d’annexe.

Comparer

Parcourir l’annexe

Consultez toutes les fiches de l’annexe III et comparez les conditions réglementaires entre les substances de cette annexe.

Ouvrir l’annexe III