Sodium monofluorophosphate
Sodium monofluorophosphate figure à l’annexe III et ne peut être utilisé que dans les conditions indiquées dans cette fiche. Concentration maximale dans cette fiche : 0.15% calculated as F. When mixed with other fluorine compounds permitted under this Annex, total F concentration must not exceed 0.15%.
Détails de la fiche
Concentration maximale
0.15% calculated as F. When mixed with other fluorine compounds permitted under this Annex, total F concentration must not exceed 0.15%
Type de produit
Avertissements
Contains sodium monofluorophosphate
For any toothpaste with compounds containing fluorine in a concentration of 0.1 to 0.15% calculated as F unless it is already labelled as contra-indicated for children (e.g. "for adult use only") the following labelling is obligatory:
"Children of 6 years and younger: use a pea-sized amount for supervised brushing to minimise swallowing. In case of intake of fluoride from other sources consult a dentist or doctor."
Nom chimique
Sodium monofluorophosphate
Nom chimique / IUPAC
Disodium fluorophosphate
Informations réglementaires
Avis du SCCS
- Opinion concerning the Safety of Fluorine Compounds in Oral Hygiene Products for Children under the Age of 6 years
- Opinion on the Safety of Fluorine Compounds in Oral Hygiene Products for Children under the Age of 6 Years
- Clarification on the Opinions SCCNFP/0653/03 and SCCP/0882/05 on the Safety of Fluorine Compounds in Oral Hygiene Products for Children under the Age of 6 Years
Ingrédients identifiés
Données clés
Identité et propriétés chimiques

Sodium Monofluorophosphate
Sodium fluorophosphate, commonly abbreviated MFP, is an inorganic compound with the chemical formula Na2PO3F. Typical for a salt, MFP is odourless, colourless, and water-soluble. This salt is an ingredient in toothpastes. It has a role as an antibacterial agent. It is an inorganic phosphate and an inorganic sodium salt. — ChEBI
- Nom IUPAC
- disodium;fluoro-dioxido-oxo-lambda5-phosphane
- Formule moléculaire
- FNa2O3P
- Masse moléculaire
- 143.950 g/mol
- Masse exacte
- 143.93644758 Da
- Surface polaire topologique
- 63,2 Ų
- Donneurs de liaisons hydrogène
- 0
- Accepteurs de liaisons hydrogène
- 4
- Unités covalentes
- 3
- Stéréocentres définis
- 0
Également connu sous le nom de
16 autres noms signalés
Identifiants de bases de données externes
- ChEBI:CHEBI:86431
- ChEMBL:CHEMBL1908359
- EPA DTXSID:DTXSID70872554
- PubMed:1234
Preuves issues de bases de données scientifiques complémentaires
EMBL-EBI ChEBI
sodium fluorophosphate
Sodium fluorophosphate, commonly abbreviated MFP, is an inorganic compound with the chemical formula Na2PO3F. Typical for a salt, MFP is odourless, colourless, and water-soluble. This salt is an ingredient in toothpastes.
- Formule
- FO3P.2Na
- Masse moyenne
- 143.949 g/mol
- Masse monoisotopique
- 143.93645 Da
- Charge formelle
- 0
- inorganic sodium salt — is a (CHEBI:38702)
- inorganic phosphate — is a (CHEBI:24838)
- antibacterial agent — has role (CHEBI:33282)
- antibacterial agent — has role (CHEBI:33282)
- inorganic sodium salt — is a (CHEBI:38702)
- inorganic phosphate — is a (CHEBI:24838)
Noms supplémentaires validés
Références croisées de cette source
- CAS: 10163-15-2 — KEGG DRUG
- CAS: 10163-15-2 — ChemIDplus
- REGISTRY_NUMBER: 11335196 — Reaxys
- MANUAL_X_REF: D05864 — KEGG DRUG
- MANUAL_X_REF: Sodium_monofluorophosphate — Wikipedia
Mis en correspondance par: Exact CAS cross-reference in the ChEBI compound record. Source mise à jour le: 2015-07-24. Récupéré le: 2026-08-31. Ouvrir la fiche source
NIH PubChem PUG-View
Attributed physical-property, hazard, environmental and use annotations.
- Physical Description: White powder; [Pfaltz and Bauer MSDS] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Note: This chemical does not meet GHS hazard criteria for 1.4% (1 of 72) of reports. Source: European Chemicals Agency (ECHA)
- Signal: Warning Source: European Chemicals Agency (ECHA)
- GHS Hazard Statements: H302 (91.7%): Harmful if swallowed [Warning Acute toxicity, oral]; H315 (11.1%): Causes skin irritation [Warning Skin corrosion/irritation] Source: European Chemicals Agency (ECHA)
- Precautionary Statement Codes: P264, P270, P280, P301+P317, P302+P352, P321, P330, P332+P317, P362+P364, and P501 (click each P-code to see the statement) Source: European Chemicals Agency (ECHA)
- ECHA C&L Notifications Summary: Aggregated GHS information provided per 72 reports by companies from 5 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Reported as not meeting GHS hazard criteria per 1 of 72 reports by companies.; There are 4 notifications provided by 71 of 72 reports by companies with hazard statement code(s).; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Source: European Chemicals Agency (ECHA)
- GHS Hazard Statements: H302 (100%): Harmful if swallowed [Warning Acute toxicity, oral]; H312 (100%): Harmful in contact with skin [Warning Acute toxicity, dermal]; H315 (100%): Causes skin irritation [Warning Skin corrosion/irritation]; H319 (100%): Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H332 (100%): Harmful if inhaled [Warning Acute toxicity, inhalation]; H335 (100%): May cause respiratory irritation [Warning Specific target organ toxicity, single exposure; Respiratory tract irritation] Source: European Chemicals Agency (ECHA)
- Precautionary Statement Codes: P261, P264, P264+P265, P270, P271, P280, P301+P317, P302+P352, P304+P340, P305+P351+P338, P317, P319, P321, P330, P332+P317, P337+P317, P362+P364, P403+P233, P405, and P501 (click each P-code to see the statement) Source: European Chemicals Agency (ECHA)
- ECHA C&L Notifications Summary: Aggregated GHS information provided per 8 reports by companies from 2 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Source: European Chemicals Agency (ECHA)
Mis en correspondance par: Existing checksum-valid CAS to unique PubChem CID match. Récupéré le: 2026-08-31. Ouvrir la fiche source
Les classifications scientifiques et les annotations de danger apportent du contexte et ne remplacent pas la décision réglementaire propre au marché indiquée ci-dessus.
Couverture des sources complémentaires et état des correspondances
| Source | Résultat | Vérifié |
|---|---|---|
| EMBL-EBI ChEBI | Correspondance exacte | 2026-08-31 |
| NIH PubChem PUG-View | Correspondance exacte | 2026-08-31 |
Une absence de correspondance enregistrée est une preuve utile que la source a été vérifiée ; ce n’est pas l’affirmation que la substance n’existe pas ailleurs.
Récupéré depuis NIH PubChem le 2026-09-02 par correspondance CAS à somme de contrôle valide. Les propriétés chimiques ne remplacent pas la décision réglementaire de cette page.
Liens d’inventaire pour Sodium monofluorophosphate
SODIUM MONOFLUOROPHOSPHATE
Fiches associées pour Sodium monofluorophosphate
AMMONIUM MONOFLUOROPHOSPHATE
3-(N-Hexadecyl-N-2-hydroxyethylammonio) propylbis (2-hydroxyethyl) ammonium difluoride
N,N',N'-Tris(polyoxyethylene)-N-hexadecylpropylenediamine dihydrofluoride
Ce que signifie l’annexe III pour Sodium monofluorophosphate
Sodium monofluorophosphate est une substance soumise à restrictions en vertu de l’annexe III du règlement (CE) n° 1223/2009 relatif aux produits cosmétiques. Son utilisation dans les cosmétiques n’est autorisée que dans les conditions précises énoncées dans l’entrée ci-dessus, y compris les limites de concentration, les restrictions de type de produit et les mentions d’avertissement requises.
Lorsque cette substance entre dans une formulation, toutes les conditions — concentration maximale, champ d’application du produit et mentions d’avertissement — doivent être respectées simultanément. Le respect d’une condition ne dispense pas des autres.
Cette fiche est liée à 1 ingrédient de l’inventaire CosIng pour le recoupement des noms et des identifiants. La page fait également apparaître 12 fiches d’annexe associées présentant des identifiants, une logique d’annexe ou des schémas de dénomination qui se recoupent.
Liste de contrôle de conformité
- Veillez à ce que la concentration de la formulation ne dépasse pas : 0.15% calculated as F. When mixed with other fluorine compounds permitted under this Annex, total F concentration must not exceed 0.15%
- Confirmez la compatibilité avec le type de produit : Oral products
- Faites figurer la mention d’avertissement requise sur l’étiquette du produit.
- Consignez les conditions d’emploi dans le dossier d’information produit (DIP).
Questions fréquentes
Note de source pour la fiche Sodium monofluorophosphate de l’annexe III
Cette page résume une fiche de l’annexe III pour Sodium monofluorophosphate à partir de documents publics de la Commission européenne sur les cosmétiques et ajoute les correspondances d’inventaire ou d’identifiants associées lorsqu’elles sont disponibles.
Utilisez cette page de fiche pour examiner les conditions de l’annexe III pour Sodium monofluorophosphate, mais confirmez toute décision réglementaire finale auprès du libellé officiel en vigueur de l’annexe et des fichiers sources.
Outils et étapes suivantes
Vérifiez votre formule
Collez une liste INCI complète pour détecter Sodium monofluorophosphate et d’autres fiches d’annexe de l’UE signalées en une seule passe.
Vérificateur INCIComparer des entrées
Comparez Sodium monofluorophosphate côte à côte avec une autre fiche d’annexe pour examiner les différences de restrictions, de concentrations et d’annexe.
ComparerParcourir l’annexe
Consultez toutes les fiches de l’annexe III et comparez les conditions réglementaires entre les substances de cette annexe.
Ouvrir l’annexe III