Zum Hauptinhalt springen
Anhang III Eintrag 27 Geändert 14 Mai 2013

Sodium monofluorophosphate

Sodium monofluorophosphate ist in Anhang III aufgeführt und darf nur unter den in diesem Eintrag genannten Bedingungen verwendet werden. Höchstkonzentration in diesem Eintrag: 0.15% calculated as F. When mixed with other fluorine compounds permitted under this Annex, total F concentration must not exceed 0.15%.

Beschränkter Stoff— Anhang III, EU-Verordnung (EG) Nr. 1223/2009
Höchstkonz.: 0.15%
Eintrag: 27

Eintragsdetails

Höchstkonzentration

0.15% calculated as F. When mixed with other fluorine compounds permitted under this Annex, total F concentration must not exceed 0.15%

Produktart

Warnhinweise

Contains sodium monofluorophosphate
For any toothpaste with compounds containing fluorine in a concentration of 0.1 to 0.15% calculated as F unless it is already labelled as contra-indicated for children (e.g. "for adult use only") the following labelling is obligatory:
"Children of 6 years and younger: use a pea-sized amount for supervised brushing to minimise swallowing. In case of intake of fluoride from other sources consult a dentist or doctor."

Chemische Bezeichnung

Sodium monofluorophosphate

Chemische / IUPAC-Bezeichnung

Disodium fluorophosphate

Regulatorische Informationen

Kerndaten

CAS
10163-15-2 -- 7631-97-2
EC
233-433-0 -- 231-552-2
Anhang
Eintragsnummer
27

Chemische Identität und Eigenschaften

Chemische 2D-Struktur aus PubChem für CAS 10163-15-2
CAS 10163-15-2CAS 7631-97-2PubChem CID 24266

Sodium Monofluorophosphate

Sodium fluorophosphate, commonly abbreviated MFP, is an inorganic compound with the chemical formula Na2PO3F. Typical for a salt, MFP is odourless, colourless, and water-soluble. This salt is an ingredient in toothpastes. It has a role as an antibacterial agent. It is an inorganic phosphate and an inorganic sodium salt. — ChEBI

IUPAC-Name
disodium;fluoro-dioxido-oxo-lambda5-phosphane
Summenformel
FNa2O3P
Molekulargewicht
143.950 g/mol
Exakte Masse
143.93644758 Da
Topologische polare Oberfläche
63,2 Ų
Wasserstoffbrücken-Donoren
0
Wasserstoffbrücken-Akzeptoren
4
Kovalente Einheiten
3
Definierte Stereozentren
0

Auch bekannt als

Phosphorofluoridic acid, disodium saltExtra-Strength AimC810JCZ56QNSC-248bridentsmilecareRegularRembrandt
16 weitere gemeldete Namen
SaliveaBarbieOrazenPriyalSparkleFreshMyntSmilepurple toothSmartMouthAGToothpasteCloveden ToothDeCureFinefra SilverGlancure ToothHello WhiteningKroger CompanyNatures Promise
Kennungen in externen Datenbanken

Belege aus weiteren wissenschaftlichen Datenbanken

EMBL-EBI ChEBI
Exakter KennungstrefferCHEBI:86431

sodium fluorophosphate

Sodium fluorophosphate, commonly abbreviated MFP, is an inorganic compound with the chemical formula Na2PO3F. Typical for a salt, MFP is odourless, colourless, and water-soluble. This salt is an ingredient in toothpastes.

Rezeptur
FO3P.2Na
Durchschnittsmasse
143.949 g/mol
Monoisotopische Masse
143.93645 Da
Formale Ladung
0
  • inorganic sodium salt — is a (CHEBI:38702)
  • inorganic phosphate — is a (CHEBI:24838)
  • antibacterial agent — has role (CHEBI:33282)
  • antibacterial agent — has role (CHEBI:33282)
  • inorganic sodium salt — is a (CHEBI:38702)
  • inorganic phosphate — is a (CHEBI:24838)
Weitere kuratierte Namen
disodium phosphorofluoridatedisodium fluorophosphatedisodium monofluorophosphateNSC-248Phosphorofluoridic acid, disodium saltSodium fluorophosphatesodium monofluorophosphateSodium phosphorofluoridate
Querverweise aus dieser Quelle

Zugeordnet durch: Exact CAS cross-reference in the ChEBI compound record. Quelle aktualisiert: 2015-07-24. Abgerufen: 2026-08-31. Quelleneintrag öffnen

NIH PubChem PUG-View
Exakter Kennungstreffer24266

Attributed physical-property, hazard, environmental and use annotations.

  • Note: This chemical does not meet GHS hazard criteria for 1.4% (1 of 72) of reports. Quelle: European Chemicals Agency (ECHA)
  • Signal: Warning Quelle: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H302 (91.7%): Harmful if swallowed [Warning Acute toxicity, oral]; H315 (11.1%): Causes skin irritation [Warning Skin corrosion/irritation] Quelle: European Chemicals Agency (ECHA)
  • Precautionary Statement Codes: P264, P270, P280, P301+P317, P302+P352, P321, P330, P332+P317, P362+P364, and P501 (click each P-code to see the statement) Quelle: European Chemicals Agency (ECHA)
  • ECHA C&L Notifications Summary: Aggregated GHS information provided per 72 reports by companies from 5 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Reported as not meeting GHS hazard criteria per 1 of 72 reports by companies.; There are 4 notifications provided by 71 of 72 reports by companies with hazard statement code(s).; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Quelle: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H302 (100%): Harmful if swallowed [Warning Acute toxicity, oral]; H312 (100%): Harmful in contact with skin [Warning Acute toxicity, dermal]; H315 (100%): Causes skin irritation [Warning Skin corrosion/irritation]; H319 (100%): Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H332 (100%): Harmful if inhaled [Warning Acute toxicity, inhalation]; H335 (100%): May cause respiratory irritation [Warning Specific target organ toxicity, single exposure; Respiratory tract irritation] Quelle: European Chemicals Agency (ECHA)
  • Precautionary Statement Codes: P261, P264, P264+P265, P270, P271, P280, P301+P317, P302+P352, P304+P340, P305+P351+P338, P317, P319, P321, P330, P332+P317, P337+P317, P362+P364, P403+P233, P405, and P501 (click each P-code to see the statement) Quelle: European Chemicals Agency (ECHA)
  • ECHA C&L Notifications Summary: Aggregated GHS information provided per 8 reports by companies from 2 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Quelle: European Chemicals Agency (ECHA)

Zugeordnet durch: Existing checksum-valid CAS to unique PubChem CID match. Abgerufen: 2026-08-31. Quelleneintrag öffnen

Wissenschaftliche Klassifizierungen und Gefahrenannotationen liefern Kontext und ersetzen nicht die oben gezeigte marktspezifische regulatorische Entscheidung.

Weitere Quellenabdeckung und Trefferstatus
QuelleErgebnisGeprüft
EMBL-EBI ChEBIExakter Treffer2026-08-31
NIH PubChem PUG-ViewExakter Treffer2026-08-31

Ein erfasster Nicht-Treffer ist ein nützlicher Beleg dafür, dass die Quelle geprüft wurde; er ist keine Behauptung, dass der Stoff anderswo nicht existiert.

Am 2026-09-02 von NIH PubChem durch prüfsummengültigen CAS-Abgleich abgerufen. Chemische Eigenschaften ersetzen nicht die regulatorische Entscheidung auf dieser Seite.

Verzeichnisverknüpfungen für Sodium monofluorophosphate

Was Anhang III für Sodium monofluorophosphate bedeutet

Sodium monofluorophosphate ist ein beschränkter Stoff nach Anhang III der EU-Kosmetikverordnung (EG) Nr. 1223/2009. Seine Verwendung in kosmetischen Mitteln ist nur unter den im obigen Eintrag genannten besonderen Bedingungen zulässig, einschließlich geltender Konzentrationsgrenzen, Beschränkungen der Produktart und erforderlicher Warnhinweise.

Wird dieser Stoff in einer Rezeptur verwendet, müssen alle Bedingungen – Höchstkonzentration, Produktbereich und Warnhinweise – gleichzeitig erfüllt sein. Die Einhaltung einer Bedingung hebt die anderen nicht auf.

Dieser Eintrag ist zum Abgleich von Namen und Kennungen mit 1 Inhaltsstoff des CosIng-Verzeichnisses verknüpft. Die Seite zeigt außerdem 12 verwandte Anhangseinträge mit überschneidenden Kennungen, Anhangslogik oder Namensmustern.

Compliance-Checkliste

  • Stellen Sie sicher, dass die Konzentration in der Rezeptur nicht überschreitet: 0.15% calculated as F. When mixed with other fluorine compounds permitted under this Annex, total F concentration must not exceed 0.15%
  • Prüfen Sie die Vereinbarkeit mit der Produktart: Oral products
  • Geben Sie den erforderlichen Warnhinweis auf dem Produktetikett an.
  • Dokumentieren Sie die Verwendungsbedingungen in der Produktinformationsdatei (PIF).

Häufig gestellte Fragen

Sodium monofluorophosphate ist in Anhang III der Verordnung (EG) Nr. 1223/2009 als beschränkter Stoff aufgeführt. Er darf nur unter den im Eintrag festgelegten Bedingungen verwendet werden, einschließlich einer etwaigen Höchstkonzentration, Beschränkung der Produktart und der oben genannten erforderlichen Warnhinweise.

CAS 10163-15-2 -- 7631-97-2 ist die eindeutige numerische Kennung, die der Chemical Abstracts Service Sodium monofluorophosphate zugewiesen hat. In der Compliance-Arbeit für kosmetische Mittel dient die CAS-Nummer dazu, den Stoff über regulatorische Datenbanken, Rohstoffspezifikationen und Sicherheitsbewertungsberichte hinweg abzugleichen. Mehrere EU-Anhangseinträge können dieselbe CAS-Nummer haben, wenn derselbe Stoff unter unterschiedlichen Bedingungen oder in verschiedenen Anhängen erscheint.

Die Höchstkonzentration von 0.15% calculated as F. When mixed with other fluorine compounds permitted under this Annex, total F concentration must not exceed 0.15% gilt für die Konzentration des Stoffs im gebrauchsfertigen kosmetischen Mittel. Wird der Stoff als Bestandteil einer Mischung geliefert, muss die Berechnung den Beitrag aller Quellen in der Rezeptur berücksichtigen. Die Gesamtkonzentration darf den angegebenen Grenzwert nicht überschreiten.

Fügen Sie Ihre vollständige Inhaltsstoffliste (INCI) in den INCI-Checker auf dieser Website ein und gleichen Sie sie mit allen Einträgen der Anhänge II–VI ab. Das Werkzeug hebt alle Inhaltsstoffe hervor, die mit beschränkten, verbotenen oder als Allergen markierten Einträgen übereinstimmen. Das ist nützlich für die schnelle Compliance-Prüfung von Rezepturen fertiger Produkte oder von Rohstoffdeklarationen.

Quellenhinweis zu Anhang III, Eintrag Sodium monofluorophosphate

Diese Seite fasst einen Eintrag aus Anhang III für Sodium monofluorophosphate aus öffentlichen Materialien der Europäischen Kommission zu kosmetischen Mitteln zusammen und ergänzt, soweit verfügbar, verknüpfte Treffer aus dem Verzeichnis oder bei Kennungen.

Nutzen Sie diese Eintragsseite, um die Bedingungen aus Anhang III für Sodium monofluorophosphate zu prüfen; bestätigen Sie jede endgültige regulatorische Entscheidung jedoch anhand des aktuellen amtlichen Anhangswortlauts und der Quelldateien.

Werkzeuge und nächste Schritte

Rezeptur prüfen

Fügen Sie eine vollständige INCI-Liste ein, um Sodium monofluorophosphate und andere markierte EU-Anhangseinträge in einem Durchgang zu finden.

INCI-Checker

Einträge vergleichen

Sodium monofluorophosphate nebeneinander mit einem anderen Anhangseintrag vergleichen, um Unterschiede bei Beschränkungen, Konzentrationen und Anhangszuordnung zu prüfen.

Vergleichen

Den Anhang durchsuchen

Alle Einträge in Anhang III ansehen und die regulatorischen Bedingungen der Stoffe in diesem Anhang vergleichen.

Anhang III öffnen