Aller au contenu principal
Annexe II Entrée 652 CMRModifiée 15 Oct 2010

Hexachlorobenzene

Hexachlorobenzene figure à l’annexe II en tant que substance interdite dans les produits cosmétiques mis sur le marché de l’UE.

Substance interdite— Annexe II, Règlement (CE) n° 1223/2009
Entrée: 652
CMR

Détails de la fiche

Nom chimique

Hexachlorobenzene

Informations réglementaires

Données clés

Annexe
Numéro d’entrée
652

Identité et propriétés chimiques

Structure chimique 2D PubChem pour le CAS 118-74-1
CAS 118-74-1PubChem CID 8370

Hexachlorobenzene

Hexachlorobenzene was widely used as a pesticide to protect the seeds of onions and sorghum, wheat, and other grains against fungus until 1965. It was also used to make fireworks, ammunition, and synthetic rubber. Currently, there are no commercial uses of hexachlorobenzene in the United States. Hexachlorobenzene is a white crystalline solid that is not very soluble in water. It does not occur naturally in the environment. It is formed as a by-product while making other chemicals, in the waste streams of chloralkali and wood-preserving plants, and when burning municipal waste. — Agency for Toxic Substances and Disease Registry (ATSDR)

Nom IUPAC
1,2,3,4,5,6-hexachlorobenzene
Formule moléculaire
C6Cl6
Masse moléculaire
284.8 g/mol
Masse exacte
283.810166 Da
XLogP3
5,7
Surface polaire topologique
0,0 Ų
Donneurs de liaisons hydrogène
0
Accepteurs de liaisons hydrogène
0
Unités covalentes
1
Stéréocentres définis
0

Également connu sous le nom de

PerchlorobenzeneAnticarieBunt-cureBunt-no-moreSanocideAmatinPhenyl perchlorylHexachlorbenzol
16 autres noms signalés
Benzene, hexachloro-SnieciotoxNO Bunt liquidEsaclorobenzeneSmut-GoSanocidNO BuntJulin's carbon chlorideCO-OP HexaGranox NMGranoxSaatbeizfungizidNO Bunt 40NO Bunt 80Pentachlorophenyl chlorideVoronit C
Identifiants de bases de données externes

Preuves issues de bases de données scientifiques complémentaires

NIH PubChem PUG-View
Correspondance exacte d’identifiant8370

Attributed physical-property, hazard, environmental and use annotations.

  • First Aid: EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.; SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.; INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. IMMEDIATELY call a physician and be prepared to transport the victim to a hospital even if no symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Ap Source: CAMEO Chemicals
  • ERG2024, Guide 152 (Hexachlorobenzene): General First Aid:; · Call 911 or emergency medical service.; · Ensure that medical personnel are aware of the material(s) involved, take precautions to protect themselves and avoid contamination.; · Move victim to fresh air if it can be done safely.; · Administer oxygen if breathing is difficult.; · If victim is not breathing:; -- DO NOT perform mouth-to-mouth resuscitation; the victim may have ingested or inhaled the substance.; -- If equipped and pulse detected, wash face and mouth, then give artificial respiration using a proper respiratory medical device (bag-valve mask, pocket mask equipped with a one-way valve or other device).; -- If no pulse detected or no respiratory medical device available, provide continuous compressions. Conduct a pulse check every two minutes or monitor for any signs of spontaneous respirations.; · Remove and isolate contaminated clothing and shoes.; · For minor skin contact, avoid spreading material on unaffected skin.; · In case of contact with substance, remove immediately by flushing skin or eyes with running water for at least 20 minutes.; · For severe burns, immediate medical attention is required.; · Effects of exposure (inhalation, ingestion, Source: Emergency Response Guidebook (ERG)
  • Signal: Danger Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • GHS Hazard Statements: H350: May cause cancer [Danger Carcinogenicity]; H372 **: Causes damage to organs through prolonged or repeated exposure [Danger Specific target organ toxicity, repeated exposure]; H400: Very toxic to aquatic life [Warning Hazardous to the aquatic environment, acute hazard]; H410: Very toxic to aquatic life with long lasting effects [Warning Hazardous to the aquatic environment, long-term hazard] Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Precautionary Statement Codes: P203, P260, P264, P270, P273, P280, P318, P319, P391, P405, and P501 (click each P-code to see the statement) Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Signal: Danger Source: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H350 (100%): May cause cancer [Danger Carcinogenicity]; H372 (100%): Causes damage to organs through prolonged or repeated exposure [Danger Specific target organ toxicity, repeated exposure]; H400 (98.3%): Very toxic to aquatic life [Warning Hazardous to the aquatic environment, acute hazard]; H410 (100%): Very toxic to aquatic life with long lasting effects [Warning Hazardous to the aquatic environment, long-term hazard] Source: European Chemicals Agency (ECHA)
  • Precautionary Statement Codes: P203, P260, P264, P270, P273, P280, P318, P319, P391, P405, and P501 (click each P-code to see the statement) Source: European Chemicals Agency (ECHA)
  • ECHA C&L Notifications Summary: Aggregated GHS information provided per 747 reports by companies from 17 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Source: European Chemicals Agency (ECHA)
  • Signal: Danger Source: NITE-CMC
  • GHS Hazard Statements: H332: Harmful if inhaled [Warning Acute toxicity, inhalation]; H351: Suspected of causing cancer [Warning Carcinogenicity]; H360: May damage fertility or the unborn child [Danger Reproductive toxicity]; H362: May cause harm to breast-fed children [Reproductive toxicity, effects on or via lactation]; H372: Causes damage to organs through prolonged or repeated exposure [Danger Specific target organ toxicity, repeated exposure]; H373: May causes damage to organs through prolonged or repeated exposure [Warning Specific target organ toxicity, repeated exposure]; H400: Very toxic to aquatic life [Warning Hazardous to the aquatic environment, acute hazard]; H410: Very toxic to aquatic life with long lasting effects [Warning Hazardous to the aquatic environment, long-term hazard] Source: NITE-CMC
  • Precautionary Statement Codes: P203, P260, P261, P263, P264, P270, P271, P273, P280, P304+P340, P317, P318, P319, P391, P405, and P501 (click each P-code to see the statement) Source: NITE-CMC
  • GHS Hazard Statements: H303: May be harmful if swallowed [Warning Acute toxicity, oral]; H351: Suspected of causing cancer [Warning Carcinogenicity]; H360: May damage fertility or the unborn child [Danger Reproductive toxicity]; H372: Causes damage to organs through prolonged or repeated exposure [Danger Specific target organ toxicity, repeated exposure]; H373: May causes damage to organs through prolonged or repeated exposure [Warning Specific target organ toxicity, repeated exposure] Source: NITE-CMC
  • Precautionary Statement Codes: P203, P260, P264, P270, P280, P301+P317, P318, P319, P405, and P501 (click each P-code to see the statement) Source: NITE-CMC
  • Health Effects: Chronic exposure to hexachlorobenzene can damage the liver, thyroid, nervous system, bones, kidneys, blood, and immune and endocrine systems. It also causes a syndrome, called black sore, that is characterized by dermal blistering and epidermolysis, pigmentation and scarring, alopecia, photosensitivity, hepatomegaly, porphyria, suppurative arthritis, osteomyelitis, and osteoporosis of the bones of the hands. It may also cause a liver disease called porphyria cutanea tarda. This disease can cause red-colored urine, skin sores, change in skin color, arthritis, and problems of the liver, nervous system, and stomach. Hexachlorobenzene also affects development and results in lower survival rates of children of exposed mothers. It is also believed to be a human carcinogen. (T10, L225) Source: Toxin and Toxin Target Database (T3DB)
  • Toxicity Summary: Based on representative levels of hexachlorobenzene in air, water, and food, the total intake of hexachlorobenzene by adults in the general population ... is predominantly from the diet. ... Hexachlorobenzene is readily absorbed by the oral route in experimental animals and poorly via the skin. ... In animals and humans, hexachlorobenzene accumulates in lipid-rich tissues, such as adipose tissue, adrenal cortex, bone marrow, skin and some endocrine tissues, and can be transferred to offspring both across the placenta and via mothers' milk. Hexachlorobenzene undergoes limited metabolism, yielding pentachlorophenol, tetrachlorohydroquinone and pentachlorothiophenol as the major metabolites in urine.... The acute toxicity of hexachlorobenzene to experimental animals is low ... In animal studies, hexachlorobenzene is not a skin or eye irritant ... The available data on the systemic toxicity of hexachlorobenzene indicate that the pathway for the biosynthesis of heme is a major target of hexachlorobenzene toxicity. Elevated levels of porphyrin and/or porphyrin precursors have been found in the liver, other tissues and excreta of several species of laboratory mammals ... Porphyria has bee Source: Hazardous Substances Data Bank (HSDB)
  • Toxicity Summary: Hexachlorobenzene causes porphyria by modifying sulfhydryl groups in the catalytic or substrate-binding sites of uroporphyrinogen decarboxylase. This inhibits uroporphyrinogen decarboxylase, resulting in a deficiency of the decarboxylation of uroporphyrinogen III and accumulation of uroporphyrins in the liver. In addition, metabolism of hexachlorobenzene by the cytochrome P-450 enzymes is believed to produce reactive electrophilic metabolites that covalently bind to cellular proteins and DNA, causing irreversible damage. Exposure to hexochlorobenzene also causes macrophages to be attracted to organs such as the spleen, lungs, and skin, where they become activated by the hexochlorobenzene. This leads to a cascade of reactions involving innate immune cells. The gene expression profiles provide evidence for the importance of macrophages and granulocytes and mediators released by these cells in the adverse inflammatory response against hexochlorobenzene. In this way, co-stimulatory or danger signals are generated that could polyclonally activate T cells. Hexachlorobenzene is a weak agonist for aryl hydrocarbon receptor and may exhibit some of its toxic effects by activating the gene-re Source: Toxin and Toxin Target Database (T3DB)
  • Environmental Bioconcentration: BCF values of 2,700 to 4,800 were measured in carp exposed to 10 ug/L of hexachlorobenzene during an 8 week incubation period and BCF values of 1,600 to 3,900 were measured in carp exposed to 1 ug/L of hexachlorobenzene during an 8 week incubation period(1). Log BCF values in rainbow trout (Salmo gairdneri) were given as 3.7-4.3(2-4) and in fathead minnows (Pimephales promelas) and sunfish (Lepomis cyanellus) log BCF values of 4.21 and 4.34, respectively, were reported(3). After an 8-week exposure period of carp (Cyprinus carpio) to concentrations of 0.5 and 0.05 ug/L of hexachlorobenzene, the BCFs were 11,000-27,000 and 6,000-30,000, respectively(5). According to a classification scheme(6), these BCF values suggest that bioconcentration in aquatic organisms is very high, provided the compound is not metabolized by the organism(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Bioconcentration: Larval stages of Chironmus decorus were used to define the bioaccumulation of sediment sorbed mono-, di-, tri-, and hexachlorobenzenes. Larvae were exposed to high and low organic content sediments equilibrated with individual radiolabeled chlorobenzenes prior to testing. The uptake of chlorobenzenes by midge larvae was rapid for all compounds, and apparent steady state conditions were reached within 48 hrs of exposure. Bioconcentration factors for the accumulation of chlorobenzenes from sediments and from interstitial and overlying waters were related to the octanol/water partition coefficients of the cmpd. Bioaccumulation was dependent on the concentration of the chemicals in interstitial water. Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Bioconcentration: A list is given of environmental chemicals detectable in adipose tissue and/or milk in non-occupationally exposed individuals that include ... . Besides their physiochemical properties ..., the list contains average BCFs, ADIs, ... production figures, fate in the environment, concentrations in human adipose tissue, and data from total diet studies from market basket investigations are given. Bioconcentration factors (wet wt basis) of these compounds are between 3 and 47 times higher in humans than in rats. Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: TERRESTRIAL FATE: Based on a recommended classification scheme(1), measured log Koc values in the range of 3.6-5.5(2-4) indicate that hexachlorobenzene is expected to be immobile in soil(SRC). Volatilization of hexachlorobenzene from moist soil surfaces is expected to be an important fate process(SRC) given a Henry's Law constant of 5.8X10-4 atm-cu m/mole at 25 °C(5). However, adsorption to soil is expected to attenuate volatilization(SRC). Hexachlorobenzene is not expected to volatilize from dry soil surfaces(SRC) based upon a vapor pressure of 1.72X10-5 mm Hg at 25 °C(6). Hexachlorobenzene is persistent to either abiotic or biodegradation processes in soil(7). One study measured a half-life (first-order kinetics) of 3-6 years for hexachlorobenzene in soils(7,8). The half-life for residence of hexachlorobenzene in soil has been estimated to be 970-2100 days with the major loss process from soil at the surface being volatilization(9). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: AQUATIC FATE: Based on a classification scheme(1), measured log Koc values of 4.9-5.5) measured in sediment(2,3) indicate that hexachlorobenzene is expected to adsorb to suspended solids and sediment(SRC). Volatilization from water surfaces is expected(4) based upon a Henry's Law constant of 5.8X10-4 atm-cu m/mole(5), but adsorption is expected to attenuate this process(SRC). Using this Henry's Law constant and an estimation method(3), volatilization half-lives for a model river and model lake are 7.5 hours and 7.5 days, respectively, if adsorption is ignored(SRC). The volatilization half-life from a model pond (2 m deep) is approximately 5 years if adsorption is considered(6). According to a classification scheme(7), BCF values in the range of 1,600 to 30,000 in fish(8) suggest that bioconcentration in aquatic organisms is very high. Hexachlorobenzene is resistant to aerobic biodegradation(8). Anaerobic biodegradation in water-sediment varies widely with half-lives ranging from weeks to years(8) with an intermediate value of roughly 1.7 years(8). Hydrolysis is not an important fate process for hexachlorobenzene(8). Photolysis half-lives in shallow water exposed to sunlight may be Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), hexachlorobenzene, which has a vapor pressure of 1.71X10-5 mm Hg at 25 °C(2), is expected to exist in both the vapor and particulate phases in the ambient atmosphere. Monitoring studies have demonstrated that the vapor phase generally predominates(3). Vapor-phase hexachlorobenzene is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 1.6 years(SRC) from its rate constant of 2.7X10-14 cu cm/molec-sec(SRC). Results of vapor phase photolysis studies indicate direct photolysis is not expected to be an important fate process in the atmosphere(3). Particulate-phase hexachlorobenzene may be physically removed from the air by wet and dry deposition(SRC). Hexachlorobenzene has been detected in many precipitation monitoring studies (both rain water and snow)(4); therefore, removal from air occurs via wet deposition(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Uses: There are currently no commercial uses of hexachlorobenzene in the United States. Hexachlorobenzene is currently formed as a byproduct during the manufacture of other chemicals (mainly solvents) and pesticides. Source: EPA Hazardous Air Pollutants
  • Sources/Uses: Was used as a pesticide until 1965; it may be produced as a waste product from chloralkali and wood-preserving plants or as an emission from municipal incinerators; it can bioaccumulate in lichens, fish, marine animals, birds, and caribou; [ATSDR ToxFAQs] Used as a seed fungicide to prevent common and dwarf bunt on wheat; [EXTOXNET] Hexachlorobenzene differs chemically and toxicologically from hexachlorocyclohexane, the gamma isomer of which (lindane) is still a widely-used insecticide. [EPA Pesticides] Used in organic synthesis; [Merck Index] Used to make rubber, electrodes, dyes, pentachlorophenol, and aromatic fluorocarbons; Also used as plasticizer for polyvinyl chloride, wood preservative, in military pyrotechnics, and to impregnate paper; [HSDB] Uses likely discontinued: as a wood preservative and in manufacture of munitions, aluminum (fluxing agent), graphite anodes, and rubber; Used as fungicidal seed treatment in some countries until 1985; Still produced in appreciable quantities as by-product in manufacture of chlorinated solvents and pesticides; [INCHEM HSG] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Restricted Notes: Banned from use as a pesticide in the U.S. [EXTOXNET] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Industrial Processes with risk of exposure: Aluminum Producing [Category: Industry]; Pulp and Paper Processing [Category: Industry]; Applying Wood Preservatives [Category: Other]; Farming (Pesticides) [Category: Industry] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Uses: For hexachlorobenzene (USEPA/OPP Pesticide Code: 061001) there are 0 labels match. /SRP: Not registered for current use in the U.S., but approved pesticide uses may change periodically and so federal, state and local authorities must be consulted for currently approved uses./ Source: Hazardous Substances Data Bank (HSDB)
  • Uses: In organic syntheses. Formerly as agricultural fungicide. Source: Hazardous Substances Data Bank (HSDB)
  • Uses: As a raw material for synthetic rubber; plasticizer for polyvinyl chloride; as a rubber peptizing agent in the manufacture of nitroso and styrene-type rubbers Source: Hazardous Substances Data Bank (HSDB)
  • Uses: Additive for pyrotechnic compositions for the military, porosity controller in manufacture of electrodes; intermediate in dye manufacture. Source: Hazardous Substances Data Bank (HSDB)
  • Uses: For more Uses (Complete) data for HEXACHLOROBENZENE (10 total), please visit the HSDB record page. Source: Hazardous Substances Data Bank (HSDB)
  • Uses: Hexachlorobenzene was previously used as a pesticide to protect the seeds of onions and sorghum, wheat, and other grains against fungus. It was also used to make fireworks, ammunition, and synthetic rubber. As it can persist in the environment for long periods of time, today exposure occurs mainly from contact with contaminated water, food, soil, or air. (L225) Source: Toxin and Toxin Target Database (T3DB)

Mis en correspondance par: Existing checksum-valid CAS to unique PubChem CID match. Récupéré le: 2026-08-31. Ouvrir la fiche source

Les classifications scientifiques et les annotations de danger apportent du contexte et ne remplacent pas la décision réglementaire propre au marché indiquée ci-dessus.

Couverture des sources complémentaires et état des correspondances
SourceRésultatVérifié
NIH PubChem PUG-ViewCorrespondance exacte2026-08-31

Une absence de correspondance enregistrée est une preuve utile que la source a été vérifiée ; ce n’est pas l’affirmation que la substance n’existe pas ailleurs.

Récupéré depuis NIH PubChem le 2026-09-02 par correspondance CAS à somme de contrôle valide. Les propriétés chimiques ne remplacent pas la décision réglementaire de cette page.

Les correspondances directes sont limitées pour cette fiche ; des entrées voisines de l’annexe II sont donc également affichées.

Ce que signifie l’annexe II pour Hexachlorobenzene

Hexachlorobenzene figure comme substance interdite à l’annexe II du règlement (CE) n° 1223/2009 relatif aux produits cosmétiques et ne doit pas être ajouté intentionnellement. L’article 17 traite séparément des traces involontaires, techniquement inévitables dans le respect des bonnes pratiques de fabrication et compatibles avec l’exigence de sécurité de l’article 3.

Les formulateurs doivent contrôler leurs ingrédients et matières premières afin de s’assurer qu’aucun ne contient cette substance. Les fournisseurs doivent fournir, sur demande, une documentation confirmant son absence.

La page fait également apparaître 12 fiches d’annexe associées présentant des identifiants, une logique d’annexe ou des schémas de dénomination qui se recoupent.

Liste de contrôle de conformité

  • Vérifiez que cette substance est absente de toutes les matières premières et formulations finies.
  • Demandez aux fournisseurs de matières premières une attestation d’absence ou un certificat d’analyse.
  • Consignez le résultat du contrôle dans le dossier d’information produit (DIP).
  • Cette substance a une classification CMR. Examinez le tableau CMR ci-dessus et vérifiez le statut actuel dans les annexes II/III avant toute utilisation.

Questions fréquentes

Oui. Hexachlorobenzene figure à l’annexe II du règlement (CE) n° 1223/2009 relatif aux produits cosmétiques et est interdit en tant qu’ingrédient cosmétique ajouté intentionnellement. L’article 17 prévoit une exception étroite pour les petites quantités involontaires techniquement inévitables dans le respect des bonnes pratiques de fabrication, à condition que le produit reste sûr au sens de l’article 3.

Le CAS 118-74-1 est l’identifiant numérique unique attribué à Hexachlorobenzene par le Chemical Abstracts Service. Dans les travaux de conformité cosmétique, le numéro CAS sert à recouper la substance entre les bases de données réglementaires, les spécifications de matières premières et les rapports d’évaluation de la sécurité. Plusieurs entrées d’annexe de l’UE peuvent partager le même numéro CAS si la même substance apparaît dans des conditions différentes ou dans des annexes différentes.

Hexachlorobenzene a une classification CMR (cancérogène, mutagène ou toxique pour la reproduction) en vertu du règlement CLP de l’UE. Selon l’article 15 du règlement (CE) n° 1223/2009 relatif aux produits cosmétiques, les substances CMR des catégories 1A ou 1B sont interdites dans les cosmétiques, sauf autorisation expresse. Les substances CMR de catégorie 2 ne peuvent être utilisées que si le SCCS les a jugées sûres. Vérifiez toujours le statut actuel dans les annexes et les éventuelles dérogations applicables avant toute utilisation.

Utilisez l’outil Vérificateur INCI de ce site pour coller votre liste complète d’ingrédients (INCI) et l’analyser par rapport à toutes les entrées des annexes II à VI. L’outil met en évidence les ingrédients correspondant à des fiches soumises à restrictions, interdites ou signalées comme allergènes. C’est utile pour un contrôle rapide de conformité des formules de produits finis ou des déclarations de matières premières.

Note de source pour la fiche Hexachlorobenzene de l’annexe II

Cette page résume une fiche de l’annexe II pour Hexachlorobenzene à partir de documents publics de la Commission européenne sur les cosmétiques et ajoute les correspondances d’inventaire ou d’identifiants associées lorsqu’elles sont disponibles.

Utilisez cette page de fiche pour examiner les conditions de l’annexe II pour Hexachlorobenzene, mais confirmez toute décision réglementaire finale auprès du libellé officiel en vigueur de l’annexe et des fichiers sources.

Outils et étapes suivantes

Vérifiez votre formule

Collez une liste INCI complète pour détecter Hexachlorobenzene et d’autres fiches d’annexe de l’UE signalées en une seule passe.

Vérificateur INCI

Comparer des entrées

Comparez Hexachlorobenzene côte à côte avec une autre fiche d’annexe pour examiner les différences de restrictions, de concentrations et d’annexe.

Comparer

Parcourir l’annexe

Consultez toutes les fiches de l’annexe II et comparez les conditions réglementaires entre les substances de cette annexe.

Ouvrir l’annexe II