1-Methoxy-4-(1E)- 1-propen-1-yl- benzene (trans- Anethole)
Listed by the Saudi Food and Drug Authority as restricted in cosmetic products; open the cited detail for the current conditions.
Décision réglementaire et conditions complètes
- Statut
- Restricted
- Rôle juridique
- Binding rule
- Résumé réglementaire
- Listed by the Saudi Food and Drug Authority as restricted in cosmetic products; open the cited detail for the current conditions.
- Conditions et restrictions
- If this row does not reproduce conditions, open the cited official detail because omission does not mean unrestricted use. Ouvrez la source citée et appliquez les exigences applicables à l’ensemble du marché ci-dessous.
Identité de la substance
- Nom dans la source officielle
- 1-Methoxy-4-(1E)- 1-propen-1-yl- benzene (trans- Anethole)
- CAS
- 104-46-1; 4180-23-8
- EC
- 203-205-5
- Correspondance d’identité
- cas_number
- Ingrédient associé
- ANETHOLE
Données d’identité CosIng associées
Noms et alias
Description CosIng : Benzene, 1-methoxy-4-(1-propenyl)-
Fonction cosmétique enregistrée : DENATURANT, FRAGRANCE
Pages de fonctions :DENATURANT, FRAGRANCE
Voir le profil complet de l’ingrédientAperçu multi-marchés pour cette identité
Fiches exactes associées actuellement présentes sur ce site. L’absence d’un marché signifie qu’aucune correspondance exacte n’a été importée, et non une autorisation d’utiliser la substance.
European Union
1 fiche associée · 1 avec conditions spécifiques
Ouvrir la fiche justificativeSaudi Arabia
Fiche actuelle1 fiche associée
Ouvrir la fiche justificative
Chimie vérifiée pour le CAS 104-46-1
Anethole
Anethole is a monomethoxybenzene that is methoxybenzene substituted by a prop-1-en-1-yl group at position 4. It has a role as a plant metabolite. — ChEBI
- Nom IUPAC
- 1-methoxy-4-[(E)-prop-1-enyl]benzene
- Formule moléculaire
- C10H12O
- Masse moléculaire
- 148.20 g/mol
- Masse exacte
- 148.088815002 Da
- Masse monoisotopique
- 148.088815002 Da
- XLogP3
- 3,3
- Surface polaire topologique
- 9,2 Ų
- Complexité moléculaire
- 121,0
- Charge formelle
- 0
- Donneurs de liaisons hydrogène
- 0
- Accepteurs de liaisons hydrogène
- 1
- Liaisons rotatives
- 2
- Atomes lourds
- 11
- Unités covalentes
- 1
Noms et synonymes signalés à PubChem
16 autres noms signalés
Identifiants de bases de données externes
- ChEBI:CHEBI:2716
- ChEBI:CHEBI:35616
- ChEMBL:CHEMBL452630
- EPA DTXSID:DTXSID9020087
- PubMed:40796067
- PubMed:39029857
- PubMed:37987213
- PubMed:35430261
- PubMed:29191726
- PubMed:27420082
- PubMed:26795242
- PubMed:22317828
- PubMed:21212515
- PubMed:20171274
- PubMed:17709257
- PubMed:16573833
Statistiques de structure avancées
- Stéréocentres atomiques définis
- 0
- Stéréocentres atomiques non définis
- 0
- Stéréocentres de liaison définis
- 1
- Stéréocentres de liaison non définis
- 0
- Caractéristiques pharmacophoriques 3D
- 3
- Cycles 3D
- 1
- Groupes hydrophobes 3D
- 1
- Caractéristiques d’accepteur 3D
- 1
- Caractéristiques de donneur 3D
- 0
- Centres anioniques 3D
- 0
- Centres cationiques 3D
- 0
- Conformères 3D
- 2
- Rotors 3D effectifs
- 2,0
Identifiants de structure lisibles par machine
- SMILES
C/C=C/C1=CC=C(C=C1)OC- InChI
InChI=1S/C10H12O/c1-3-4-9-5-7-10(11-2)8-6-9/h3-8H,1-2H3/b4-3+- InChIKey
RUVINXPYWBROJD-ONEGZZNKSA-N
Preuves issues de bases de données scientifiques complémentaires
NIH PubChem PUG-View
Attributed physical-property, hazard, environmental and use annotations.
- Boiling Point: 454.1 °F at 760 mmHg (NTP, 1992) Source: CAMEO Chemicals
- Boiling Point: 234 °C Source: Hazardous Substances Data Bank (HSDB)
- Boiling Point: 234-239.5 °C Source: Joint FAO/WHO Expert Committee on Food Additives (JECFA)
- Color/Form: White crystals Source: Hazardous Substances Data Bank (HSDB)
- Density: 0.9882 (NTP, 1992) - Less dense than water; will float Source: CAMEO Chemicals
- Density: 0.9878 @ 20 °C/4 °C Source: Hazardous Substances Data Bank (HSDB)
- Density: 0.983-0.988 Source: Joint FAO/WHO Expert Committee on Food Additives (JECFA)
- Flash Point: 195 °F (NTP, 1992) Source: CAMEO Chemicals
- Flash Point: 90.1 °C Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Melting Point: 70.4 °F (NTP, 1992) Source: CAMEO Chemicals
- Melting Point: 21.3 °C Source: Hazardous Substances Data Bank (HSDB)
- Melting Point: Liquid Molar Volume = 0.1507 cu m/kmol; Heat of Fusion @ Melting Point = 1.60E+7 J/kmol Source: Hazardous Substances Data Bank (HSDB)
- Odor: ANISE OIL ODOR Source: Hazardous Substances Data Bank (HSDB)
- Physical Description: Anethole appears as white crystals or a liquid. Odor of anise oil and a sweet taste. (NTP, 1992) Source: CAMEO Chemicals
- Physical Description: Liquid Source: EPA Chemical Data Reporting (CDR)
- Physical Description: Liquid; CBI Source: EPA Chemical Data Reporting (CDR)
- Physical Description: White solid with an odor of anise; Affected by light; [Hawley] Colorless liquid with a sweet odor of aniseed; [Merck Index] Colorless crystalline solid or liquid; mp = 20-23 deg C; [MSDSonline] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Physical Description: Colourless to faintly yellow liquid with an aniseed-like odour Source: Joint FAO/WHO Expert Committee on Food Additives (JECFA)
- Refractive Index: 1.559-1.562 Source: Joint FAO/WHO Expert Committee on Food Additives (JECFA)
- Solubility: Slightly soluble (NTP, 1992) Source: CAMEO Chemicals
- Solubility: 1:8 IN 80% ALCOHOL; 1:1 IN 90% ETHANOL Source: Hazardous Substances Data Bank (HSDB)
- Solubility: ALMOST WATER INSOL; MISCIBLE WITH CHLOROFORM & ETHER Source: Hazardous Substances Data Bank (HSDB)
- Solubility: Water solubility = 1.110E-1 g/l @ 25 °C Source: Hazardous Substances Data Bank (HSDB)
- Solubility: Slightly soluble in water; miscible with chloroform and ether Source: Joint FAO/WHO Expert Committee on Food Additives (JECFA)
- Solubility: 1 ml in 2 ml 96% alcohol (in ethanol) Source: Joint FAO/WHO Expert Committee on Food Additives (JECFA)
- Vapor Pressure: 0.05 [mmHg] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Vapor Pressure: 5.45 Pa @ 294 deg K Source: Hazardous Substances Data Bank (HSDB)
- Viscosity: 2.45X10-3 Pa.s Source: Hazardous Substances Data Bank (HSDB)
- First Aid: EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.; SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.; INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) shou Source: CAMEO Chemicals
- Note: This chemical does not meet GHS hazard criteria for 2.9% (55 of 1880) of reports. Source: European Chemicals Agency (ECHA)
- Signal: Warning Source: European Chemicals Agency (ECHA)
- GHS Hazard Statements: H317 (95.3%): May cause an allergic skin reaction [Warning Sensitization, Skin] Source: European Chemicals Agency (ECHA)
- Precautionary Statement Codes: P261, P272, P280, P302+P352, P321, P333+P317, P362+P364, and P501 (click each P-code to see the statement) Source: European Chemicals Agency (ECHA)
- ECHA C&L Notifications Summary: Aggregated GHS information provided per 1880 reports by companies from 19 notifications to the ECHA C&L Inventory.; Reported as not meeting GHS hazard criteria per 55 of 1880 reports by companies.; There are 18 notifications provided by 1825 of 1880 reports by companies with hazard statement code(s).; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Source: European Chemicals Agency (ECHA)
- Note: This chemical does not meet GHS hazard criteria for 6.2% (20 of 321) of reports. Source: European Chemicals Agency (ECHA)
- GHS Hazard Statements: H317 (93.8%): May cause an allergic skin reaction [Warning Sensitization, Skin]; H412 (36.4%): Harmful to aquatic life with long lasting effects [Hazardous to the aquatic environment, long-term hazard] Source: European Chemicals Agency (ECHA)
- Precautionary Statement Codes: P261, P272, P273, P280, P302+P352, P321, P333+P317, P362+P364, and P501 (click each P-code to see the statement) Source: European Chemicals Agency (ECHA)
- ECHA C&L Notifications Summary: Aggregated GHS information provided per 321 reports by companies from 5 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Reported as not meeting GHS hazard criteria per 20 of 321 reports by companies.; There are 4 notifications provided by 301 of 321 reports by companies with hazard statement code(s).; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Source: European Chemicals Agency (ECHA)
- Signal: Warning Source: Hazardous Chemical Information System (HCIS), Safe Work Australia
- GHS Hazard Statements: H317: May cause an allergic skin reaction [Warning Sensitization, Skin] Source: Hazardous Chemical Information System (HCIS), Safe Work Australia
- Precautionary Statement Codes: P261, P272, P280, P302+P352, P321, P333+P317, P362+P364, and P501 (click each P-code to see the statement) Source: Hazardous Chemical Information System (HCIS), Safe Work Australia
- Environmental Bioconcentration: Based upon an experimental water solubility of 111 mg/l(1), the BCF of anethole can be estimated to be approximately 43.4 from a regression-derived equation(2). This estimated BCF value suggests that bioconcentration in aquatic organisms is not expected to be an important fate process(SRC). Source: Hazardous Substances Data Bank (HSDB)
- Environmental Fate: TERRESTRIAL FATE: Anethole will have a medium to low mobility(3) in soil based on estimated Koc values ranging from 327 to 680(1,2). Insufficient data are available to predict the relative importance or rate of biodegradation in soil conditions(SRC). Source: Hazardous Substances Data Bank (HSDB)
- Environmental Fate: AQUATIC FATE: Volatilization of anethole from water is not rapid but could possibly be significant based upon estimated Henry's Law constant of 7.18X10-5 atm cu m/mol(1,2,SRC). Volatilization half-lives from a model river (1 m deep flowing 1 m/sec with a wind velocity of 3 m/sec) and a model lake (1 meter deep) can be estimated to be about 18 hours and 9 days respectively(2). Insufficient data are available to predict the relative importance or rate of biodegradation from natural waters(SRC). Aquatic bioconcentration is not expected to be an important fate process, however, based on a Koc value of 680(3), some absorption to sediment may occur(SRC). Source: Hazardous Substances Data Bank (HSDB)
- Environmental Fate: ATMOSPHERIC FATE: Based on an extrapolated vapor pressure of approximately 0.005 mm Hg at 25 °C(1), anethole will exist in the atmosphere in the vapor phase(2). It will degrade in the atmosphere by reaction with photochemically produced hydroxyl radicals with estimated half-lives of 4.9 and 4.5 hrs for the cis and trans isomers, respectively(3). Anethole will also degrade in the atmosphere by reaction with atmospheric ozone with estimated half-lives of 4.03 and 2.02 hrs for the cis and trans isomers, respectively(3). Source: Hazardous Substances Data Bank (HSDB)
- Consumer Uses: Fragrance Source: EPA Chemical Data Reporting (CDR)
- Industry Uses: Intermediate Source: EPA Chemical Data Reporting (CDR)
- Industry Uses: Other; Intermediates; Fragrance Source: EPA Chemical Data Reporting (CDR)
- Sources/Uses: Chief constituent of anise, star anise, and fennel oils; Used as a flavoring agent (foods, beverages, and drugs) and fragrance (soaps and dentifrices); [Merck Index] Used to make anisaldehyde, as a sensitizer in bleaching colors in photography, an embedding material in microscopy, and an insect attractant; [HSDB] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Industrial Processes with risk of exposure: Photographic Processing [Category: Other] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Uses: The active ingredient is no longer contained in any registered pesticide products ... "cancelled." Source: Hazardous Substances Data Bank (HSDB)
- Uses: MFR ANISALDEHYDE; IN PERFUMERY, SOAP & DENTIFRICES; SENSITIZER IN BLEACHING COLORS IN COLOR PHOTOGRAPHY; AS EMBEDDING MATERIAL IN MICROSCOPY; PHARMACEUTIC AID (FLAVOR); VET: HAS BEEN USED AS A CARMINATIVE & AS A FLAVORING AGENT Source: Hazardous Substances Data Bank (HSDB)
- Uses: AS FLAVOR INGREDIENT Source: Hazardous Substances Data Bank (HSDB)
- Uses: IN LICORICE CANDIES Source: Hazardous Substances Data Bank (HSDB)
- Uses: For more Uses (Complete) data for ANETHOLE (6 total), please visit the HSDB record page. Source: Hazardous Substances Data Bank (HSDB)
- Uses: Use (kg; approx.) in Germany (2009): >25; Consumption (g per capita; approx.) in Germany (2009): 0.000305; Calculated removal (%): 96.6 Source: NORMAN Suspect List Exchange
Mis en correspondance par: Existing checksum-valid CAS to unique PubChem CID match. Récupéré le: 2026-08-31. Ouvrir la fiche source
Les classifications scientifiques et les annotations de danger apportent du contexte et ne remplacent pas la décision réglementaire propre au marché indiquée ci-dessus.
Couverture des sources complémentaires et état des correspondances
| Source | Résultat | Vérifié |
|---|---|---|
| EMBL-EBI ChEBI | À examiner | 2026-08-31 |
| NIH PubChem PUG-View | Correspondance exacte | 2026-08-31 |
Une absence de correspondance enregistrée est une preuve utile que la source a été vérifiée ; ce n’est pas l’affirmation que la substance n’existe pas ailleurs.
Récupéré depuis NIH PubChem le 2026-09-02 par correspondance CAS à somme de contrôle valide. Les propriétés chimiques ne remplacent pas la décision réglementaire de cette page.
Source officielle et provenance
- Source enregistrée
- Saudi SFDA prohibited and restricted ingredient lists
- Référence de la source
- SFDA restricted list, page 22, row 6
- Identifiant de la fiche source
restricted-21-6- Version de la source
- live-snapshot-2026-08-30
- Langue de la source
- English
- État de la traduction
- Original is English
- Instantané vérifié le
- 2026-08-30 05:18 UTC
- Méthode de validation
- complete SFDA paginated HTML snapshot; strict page/row counts
- SHA-256
ceb6cc636e6b1f4b3013f88ce0297217b49d6194342c6ece5c03b1e04256d71a
Notes du jeu de données enregistré
- Couverture du jeu de données
- Prohibited and restricted substances with CAS, EC and conditions
- Note sur l’autorité
- Official SFDA dated lists; version and hash each release
Place de cette fiche dans le jeu de données du marché
Répartition des statuts
Un texte de conditions est présent pour 0 des 2090 fiches actuelles. Un champ de conditions vide est interprété selon le type de fiche ci-dessus ; il n’est jamais converti en une affirmation d’utilisation sans restriction.
Saudi Arabia contexte du marché
Complete official list index
Version de la couverture : SFDA live prohibited/restricted lists, snapshot 30 August 2026
Every page and entry in the public SFDA prohibited and restricted ingredient indexes; restricted detail pages remain the source for conditions.
Liste de contrôle de vérification
- Search names and CAS across both SFDA lists.
- Open the cited restricted-entry detail and apply every condition.
- Check current SFDA/GSO technical regulations and updates.
- Complete eCosma notification, label and responsible-party requirements.
Sources officielles du marché
- Saudi SFDA prohibited and restricted ingredient listsOfficial SFDA dated lists; version and hash each release
Procédure de vérification et exhaustivité de la fiche
Avant d’utiliser ce résultat dans une décision de conformité
- Confirmez que « 1-Methoxy-4-(1E)- 1-propen-1-yl- benzene (trans- Anethole) » et chaque identifiant CAS/CE correspondent à la matière de votre spécification fournisseur.
- Search names and CAS across both SFDA lists.
- Open the cited restricted-entry detail and apply every condition.
- Check current SFDA/GSO technical regulations and updates.
- Complete eCosma notification, label and responsible-party requirements.
- Consignez la version de la source et revérifiez auprès de l’autorité de réglementation avant la fabrication, la notification ou la mise sur le marché.
Champs disponibles dans cette fiche
- Nom officiel de la substanceDisponible
- CASDisponible
- ECDisponible
- Texte de condition distinctAbsent de la ligne source
- Date d’effetNon fourni
- Empreinte de l’instantané et méthodeDisponible
Questions auxquelles cette page répond
Citation stable
1-Methoxy-4-(1E)- 1-propen-1-yl- benzene (trans- Anethole). SFDA restricted list, page 22, row 6. Saudi Arabia. Source version live-snapshot-2026-08-30. CosIng Checker regulatory record: https://cosingchecker.com/fr/regulations/sa/records/11541/
Citez l’autorité de réglementation comme autorité juridique. Cette page est un index structuré de preuves et une aide à la vérification, et non un substitut au texte officiel ni à une évaluation juridique professionnelle.
Interprétation et limites pour Saudi Arabia
This substance is not unrestricted: cosmetic use is subject to the conditions in the cited official record.
Check product type, body area, concentration, purity and warning requirements before deciding whether a formulation is compliant.
Comment interpréter le rôle juridique
The cited row forms part of a binding rule or legally incorporated list for this market.
Preuves sur cette page
- Résultat enregistré : Restricted
- Rôle juridique : Binding rule
- Version de la source : live-snapshot-2026-08-30
Ce que cela ne prouve pas
No list match is not permission; Gulf/SFDA product, claim, notification and technical requirements still apply.
Recherche complémentaire sur la substance auprès de sources faisant autorité
Aucune de ces sources ne prévaut sur la décision de marché ci-dessus.
Cosmetic Ingredient Review safety assessments
Expert Panel conclusions, assessed ingredient groups, use conditions, dates and report documents
Independent expert review considered by FDA; not a government approval or binding market rule
Rechercher cette identité à la sourceFDA Global Substance Registration System
UNII identifiers, preferred names, substance types, codes and public substance relationships
Identity registry only; UNII availability does not imply FDA review or approval
Rechercher cette identité à la sourceILO/WHO International Chemical Safety Cards
Hazards, symptoms, first aid, storage, incompatibilities and physical properties for covered chemicals
International occupational chemical-safety reference; not cosmetic-use approval
Rechercher cette identité à la sourceJapan NITE-CHRIP
Chemical identity, Japanese and foreign legal lists, GHS hazards and exposure-related information
Chemical-management evidence; cosmetic status remains governed by the applicable MHLW standard and market rules
Rechercher cette identité à la sourceNIOSH Pocket Guide to Chemical Hazards
REL, PEL, IDLH, properties, exposure routes, symptoms, target organs, first aid and measurement methods for covered workplace chemicals
US occupational-health guidance and limits; not a cosmetic ingredient decision
Rechercher cette identité à la sourceOECD eChemPortal
Gateway to authority-owned physical-property, fate, ecotoxicity, toxicity, exposure and GHS records
Discovery gateway; each linked authority remains responsible for its data
Rechercher cette identité à la sourceUS EPA CompTox CTX APIs
Clé d’API requise pour l’importDTXSID identity, experimental and predicted properties, toxicity, bioactivity, exposure and environmental data
Scientific and computational evidence; predictions must remain labelled and do not determine cosmetic legality
Rechercher cette identité à la source