Aller au contenu principal
IngrédientMise à jour CosIng 15 Oct 2010

MALEIC ACID

2-Butenedioic acid (2Z)-

MALEIC ACID figure dans l’inventaire CosIng de l’UE, mais aucune fiche d’annexe directe n’est encore associée sur cette page.

En un coup d’œil

Fonction
Buffering
CAS
110-16-7
EC
203-742-5
Annexes de l’UE
Non répertoriéAucune fiche d’annexe de l’UE n’est associée. Ce n’est pas une autorisation.

Preuves réglementaires par marché

Aucune règle pour cet ingrédient n’a été importée pour aucun des 13 marchés suivis ici.

Cela décrit cet inventaire, et non le droit. L’absence de règle importée n’est pas la preuve qu’un ingrédient est autorisé : une règle peut exister sous un autre nom ou identifiant, ou dans un jeu de données pas encore importé ici.

Détails d’inventaire pour MALEIC ACID

Nom INCI

MALEIC ACID

Nom Ph. Eur.

acidum maleicum

Description

2-Butenedioic acid (2Z)-

Provenance de la fiche

Référence d’inventaire
35135
Identité importée
MALEIC ACID
Mise à jour de la source
15/10/2010
Notes de source CosIng de la Commission européenne

Données clés

Restriction
—
Fonction
  • BUFFERING

    Stabilising the pH of an aqueous medium in a narrow range even if an acid or base is added. Altering and/or maintaining a cosmetic product's pH at the desired level.

Identité et propriétés chimiques

Structure chimique 2D PubChem pour le CAS 110-16-7
CAS 110-16-7PubChem CID 444266

Maleic Acid

Maleic acid is a butenedioic acid in which the double bond has cis- (Z)-configuration. It has a role as a mouse metabolite, a plant metabolite and an algal metabolite. It is a conjugate acid of a maleate and a maleate(1-). — ChEBI

Nom IUPAC
(Z)-but-2-enedioic acid
Formule moléculaire
C4H4O4
Masse moléculaire
116.07 g/mol
Masse exacte
116.01095860 Da
XLogP3
-0,3
Surface polaire topologique
74,6 Ų
Donneurs de liaisons hydrogène
2
Accepteurs de liaisons hydrogène
4
Unités covalentes
1
Stéréocentres définis
0

Également connu sous le nom de

cis-butenedioic acidToxilic acidMaleinic acidMalenic acid(2Z)-but-2-enedioic acid(Z)-Butenedioic acidcis-1,2-Ethylenedicarboxylic acid2-Butenedioic acid (Z)-
16 autres noms signalés
2-Butenedioic acid (2Z)-(Z)-2-Butenedioic acidKyselina maleinovaButenedioic acid, (Z)-cis-2-Butenedioic acid1,2-Ethylenedicarboxylic acid, (Z)H2male(2Z)-2-Butenedioic acidcis-but-2-enedioic acidScotchbond Multipurpose Etchant91XW058U2CNSC-25940CHEBI:18300But-2-enedioic acidRefChem:5977203-742-5
Identifiants de bases de données externes

Preuves issues de bases de données scientifiques complémentaires

NIH PubChem PUG-View
Correspondance exacte d’identifiant444266

Attributed physical-property, hazard, environmental and use annotations.

  • Boiling Point: 275 °F at 760 mmHg (decomposes) (NTP, 1992) Source: CAMEO Chemicals
  • First Aid: EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.; SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.; INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. IMMEDIATELY call a physician and be prepared to transport the victim to a hospital even if no symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Ap Source: CAMEO Chemicals
  • Signal: Warning Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • GHS Hazard Statements: H302: Harmful if swallowed [Warning Acute toxicity, oral]; H315: Causes skin irritation [Warning Skin corrosion/irritation]; H317: May cause an allergic skin reaction [Warning Sensitization, Skin]; H319: Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H335: May cause respiratory irritation [Warning Specific target organ toxicity, single exposure; Respiratory tract irritation] Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Precautionary Statement Codes: P261, P264, P264+P265, P270, P271, P272, P280, P301+P317, P302+P352, P304+P340, P305+P351+P338, P319, P321, P330, P332+P317, P333+P317, P337+P317, P362+P364, P403+P233, P405, and P501 (click each P-code to see the statement) Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Note: This chemical does not meet GHS hazard criteria for 0.2% (3 of 1974) of reports. Source: European Chemicals Agency (ECHA)
  • Signal: Warning Source: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H302 (98.7%): Harmful if swallowed [Warning Acute toxicity, oral]; H312 (20%): Harmful in contact with skin [Warning Acute toxicity, dermal]; H315 (93.8%): Causes skin irritation [Warning Skin corrosion/irritation]; H317 (99.3%): May cause an allergic skin reaction [Warning Sensitization, Skin]; H319 (92.3%): Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H335 (96.1%): May cause respiratory irritation [Warning Specific target organ toxicity, single exposure; Respiratory tract irritation] Source: European Chemicals Agency (ECHA)
  • Precautionary Statement Codes: P261, P264, P264+P265, P270, P271, P272, P280, P301+P317, P302+P352, P304+P340, P305+P351+P338, P317, P319, P321, P330, P332+P317, P333+P317, P337+P317, P362+P364, P403+P233, P405, and P501 (click each P-code to see the statement) Source: European Chemicals Agency (ECHA)
  • ECHA C&L Notifications Summary: Aggregated GHS information provided per 1974 reports by companies from 67 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Reported as not meeting GHS hazard criteria per 3 of 1974 reports by companies.; There are 66 notifications provided by 1971 of 1974 reports by companies with hazard statement code(s).; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Source: European Chemicals Agency (ECHA)
  • Signal: Danger Source: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H315 (100%): Causes skin irritation [Warning Skin corrosion/irritation]; H317 (83.3%): May cause an allergic skin reaction [Warning Sensitization, Skin]; H318 (77.8%): Causes serious eye damage [Danger Serious eye damage/eye irritation]; H319 (22.2%): Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H335 (22.2%): May cause respiratory irritation [Warning Specific target organ toxicity, single exposure; Respiratory tract irritation] Source: European Chemicals Agency (ECHA)
  • Precautionary Statement Codes: P261, P264, P264+P265, P271, P272, P280, P302+P352, P304+P340, P305+P351+P338, P305+P354+P338, P317, P319, P321, P332+P317, P333+P317, P337+P317, P362+P364, P403+P233, P405, and P501 (click each P-code to see the statement) Source: European Chemicals Agency (ECHA)
  • ECHA C&L Notifications Summary: Aggregated GHS information provided per 18 reports by companies from 4 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Source: European Chemicals Agency (ECHA)
  • Cosmetic Ingredient Review Finding(s): Safe in the present practices of use and concentration. Ingredient, concentration, and use information are available in documents discoverable at https://cir-reports.cir-safety.org Source: Cosmetic Ingredient Review (CIR)
  • Toxicity Summary: IDENTIFICATION AND USE: Maleic acid forms colorless or white crystals. It is used for manufacturing of artificial resins, dyeing and finishing wool, and for preparing the maleate salts of antihistamines and similar drugs. HUMAN EXPOSURE AND TOXICITY: A 20% aqueous solution produced a mild and reversible skin irritation in humans. Lower concentrations (< 5%) are sufficient to produce serious ocular irritation in human subjects. Neat maleic acid is reported to be a severe irritant to the mucous membranes of humans. In vitro, maleic acid produced highly significant alterations in the physical state of human erythrocyte membrane proteins. ANIMAL STUDIES: Single intravenous application of 400 or 200 mg/kg bw maleic acid to male rats via jugular venous catheter caused immediate injury in the kidneys which progressed to extensive necrosis by 24 hr after administration. In dogs the intravenous administration of maleic acid (50 mg/kg) increased sodium, potassium, and phosphate excretion. Maleic acid may enhance anaphylactic histamine release from guinea pig lung by its metabolic utilization in the tricarboxylic acid cycle. Kidney damage has been observed as a systemic toxic action of maleic Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Bioconcentration: The BCF of maleic acid in fish (golden ide) was measured as <10 after 3 days of exposure(1). According to a classification scheme(2), this BCF suggests the potential for bioconcentration in aquatic organisms is low(SRC). The BCF in algae (Chorella fusca) was 11 after a 24 hour exposure period(1). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 7(SRC), determined from a structure estimation method(2), indicates that maleic acid is expected to have very high mobility in soil(SRC). The pKa values of maleic acid are 1.94 and 6.22(3), indicating that this compound will exist almost entirely in anion from in the environment and anions generally do not adsorb more strongly to soils containing organic carbon and clay than their neutral counterparts(4). Volatilization of maleic acid from moist soil surfaces is not expected to be an important fate process(SRC) given an estimated Henry's Law constant of 1.4X10-12 atm-cu m/mole(SRC), using a fragment constant estimation method(2). Maleic acid is not expected to volatilize from dry soil surfaces(SRC) based upon a vapor pressure of 1.34X10-5 mm Hg at 25 °C(3). Results of several screening tests indicate that maleic acid is readily biodegradable(3,5), and therefore, biodegradation is expected to be an important fate process in soil(SRC). Maleic acid reached 87% of its theoretical BOD in 2 weeks in the Japanese MITI test(5). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 7(SRC), determined from a structure estimation method(2), indicates that maleic acid is not expected to adsorb to suspended solids and sediment(SRC). Volatilization from water surfaces is not expected(3) based upon an estimated Henry's Law constant of 1.4X10-12 atm-cu m/mole(SRC), developed using a fragment constant estimation method(2). The pKa values of 1.94 and 6.22(4) indicate maleic acid will exist almost entirely in anion form at pH values of 5 to 9 and ionization could attenuate potential volatilization from water surfaces(SRC). Although almost entirely in anion form, acids have been shown to have effective Henry's Law constants under environmental conditions(5). According to a classification scheme(6), a BCF of <10 measured in fish (golden ide)(7) suggests the potential for bioconcentration in aquatic organisms is low. Results of several screening tests indicate that maleic acid is readily biodegradable(4,8) and, therefore, biodegradation is expected to be an important fate process in water(SRC). Maleic acid reached 87% of its theoretical BOD in 2 weeks in the Japanese MITI test(8). Maleic acid is Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), maleic acid, which has a vapor pressure of 1.34X10-5 mm Hg at 25 °C(2) will exist in both the vapor and particulate phases in the ambient atmosphere. Vapor-phase maleic acid is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 2 days(SRC), calculated from its rate constant of 7.95X10-12 cu cm/molecule-sec at 25 °C(SRC) that was derived using a structure estimation method(3). Vapor-phase maleic acid is also degraded in the atmosphere by reaction with ozone(SRC); the half-life for this reaction in air is estimated to be 13 days(SRC), calculated from its rate constant of 8.8X10-19 cu cm/molecule-sec at 25 °C(SRC) that was derived using a structure estimation method(3). Maleic acid has been detected in numerous atmospheric aerosol samples(4-6). Particulate-phase maleic acid may be removed from the air by wet and dry deposition(SRC). The UV spectrum of maleic acid in water(7) indicates that the compound does not absorb at wavelengths >290 nm and, therefore, is not e Source: Hazardous Substances Data Bank (HSDB)

Mis en correspondance par: Existing checksum-valid CAS to unique PubChem CID match. Récupéré le: 2026-08-31. Ouvrir la fiche source

Les classifications scientifiques et les annotations de danger apportent du contexte et ne remplacent pas la décision réglementaire propre au marché indiquée ci-dessus.

Couverture des sources complémentaires et état des correspondances
SourceRésultatVérifié
NIH PubChem PUG-ViewCorrespondance exacte2026-08-31

Une absence de correspondance enregistrée est une preuve utile que la source a été vérifiée ; ce n’est pas l’affirmation que la substance n’existe pas ailleurs.

Récupéré depuis NIH PubChem le 2026-08-31 par correspondance CAS à somme de contrôle valide. Les propriétés chimiques ne remplacent pas la décision réglementaire de cette page.

Preuves officielles sur le nom d’ingrédient de l’UE

Le nom de l’ingrédient correspond exactement au glossaire officiel 2025 de l’UE des dénominations communes d’ingrédients.

Ingrédients ayant des fonctions de formulation communes

Sources officielles et scientifiques complémentaires

11 bases de données externes pour vérifier cette identité

Comment MALEIC ACID apparaît dans l’inventaire CosIng

L’inventaire CosIng répertorie MALEIC ACID comme ingrédient cosmétique et cette page l’associe à 0 fiche d’annexe. L’entrée d’inventaire reprend les noms et identifiants, tandis que la fiche d’annexe indique où la substance est interdite, soumise à restrictions ou inscrite sur une liste positive dans le droit de l’UE sur les cosmétiques.

MALEIC ACID est aussi associé à 1 fonction cosmétique dans les données officielles. Les désignations de fonction décrivent l’usage prévu, mais ne remplacent pas l’examen réglementaire des fiches d’annexe associées avant un travail de formulation ou d’étiquetage.

Questions fréquentes

MALEIC ACID figure dans l’inventaire des ingrédients CosIng de l’UE, sans fiche de restriction d’annexe directement associée pour le moment. L’absence de lien avec une annexe ne garantit pas une utilisation sans restriction ; vérifiez toujours auprès de la base de données officielle CosIng actuelle avant de formuler.

Selon l’inventaire CosIng de l’UE, MALEIC ACID porte la ou les désignations de fonction suivantes :

Le CAS 110-16-7 peut apparaître dans plusieurs fiches d’annexe de l’UE. La page de recherche par CAS présente toutes les entrées des annexes II à VI partageant cet identifiant, ce qui est utile pour déterminer le statut réglementaire transversal aux annexes d’une même substance chimique.

Utilisez le vérificateur INCI pour analyser une liste d’ingrédients complète sur des marchés sélectionnés, ou comparez cette substance sur tous les jeux de données de marchés pris en charge.

Note de source pour MALEIC ACID

Cette page reproduit l’entrée d’inventaire CosIng de MALEIC ACID issue de documents publics de la Commission européenne sur les ingrédients cosmétiques et affiche les identifiants associés, même si aucune correspondance directe avec une annexe n’est actuellement rattachée.

Utilisez cette page d’inventaire pour étudier MALEIC ACID et comparer les fiches associées, mais vérifiez les restrictions et le statut juridique auprès du texte officiel en vigueur et de la législation avant toute décision réglementaire.

Outils et étapes suivantes

Vérifiez votre formule

Analysez une liste INCI complète pour détecter MALEIC ACID et les éventuelles restrictions d’annexes de l’UE ou signalements d’allergènes associés.

Vérificateur INCI

Rechercher des ingrédients similaires

Trouvez d’autres ingrédients de l’inventaire et entrées d’annexe liés à MALEIC ACID, à ses identifiants ou à des variantes de nom proches.

Rechercher