MAGNESIUM OXIDE
Magnesium oxide (CI 77711)
MAGNESIUM OXIDE figure dans l’inventaire CosIng de l’UE, mais aucune fiche d’annexe directe n’est encore associée sur cette page.
En un coup d’œil
- Fonction
- Absorbent, buffering, opacifying
- CAS
- 1309-48-4
- EC
- 215-171-9
- Annexes de l’UE
- Non répertoriéAucune fiche d’annexe de l’UE n’est associée. Ce n’est pas une autorisation.
Preuves réglementaires par marché
Aucune règle pour cet ingrédient n’a été importée pour aucun des 13 marchés suivis ici.
Cela décrit cet inventaire, et non le droit. L’absence de règle importée n’est pas la preuve qu’un ingrédient est autorisé : une règle peut exister sous un autre nom ou identifiant, ou dans un jeu de données pas encore importé ici.
Détails d’inventaire pour MAGNESIUM OXIDE
Nom INCI
MAGNESIUM OXIDE
Description
Magnesium oxide (CI 77711)
Provenance de la fiche
- Référence d’inventaire
- 35110
- Identité importée
- MAGNESIUM OXIDE
- Mise à jour de la source
- 15/10/2010
Fiches d’annexe pour MAGNESIUM OXIDE
Données clés
- ABSORBENT
Taking up water- and/or oil-soluble (dissolved or finely dispersed) substances.
- BUFFERING
Stabilising the pH of an aqueous medium in a narrow range even if an acid or base is added. Altering and/or maintaining a cosmetic product's pH at the desired level.
- OPACIFYING
Reducing transparency or translucency of cosmetics.
Identité et propriétés chimiques

Magnesium Oxide
Magnesium oxide appears as a white solid, often found as a powder. When fine particles of magnesium oxide are dispersed in air, whether directly or when generated by the burning or cutting of magnesium metal, the resulting magnesium oxide fume is an inhalation hazard. — CAMEO Chemicals
- Nom IUPAC
- oxomagnesium
- Formule moléculaire
- MgO
- Masse moléculaire
- 40.305 g/mol
- Masse exacte
- 39.9799563 Da
- Surface polaire topologique
- 17,1 Ų
- Donneurs de liaisons hydrogène
- 0
- Accepteurs de liaisons hydrogène
- 1
- Unités covalentes
- 1
- Stéréocentres définis
- 0
Également connu sous le nom de
16 autres noms signalés
Identifiants de bases de données externes
- ChEMBL:CHEMBL1200572
- PubMed:29282847
- PubMed:27920530
- PubMed:24096598
Preuves issues de bases de données scientifiques complémentaires
NIH PubChem PUG-View
Attributed physical-property, hazard, environmental and use annotations.
- Boiling Point: 6512 °F at 760 mmHg (NIOSH, 2024) Source: CAMEO Chemicals
- Boiling Point: 3,600 °C Source: Hazardous Substances Data Bank (HSDB)
- Boiling Point: 3600 °C Source: ILO-WHO International Chemical Safety Cards (ICSCs)
- Boiling Point: 6512 °F Source: Occupational Safety and Health Administration (OSHA)
- Boiling Point: 3600 °C @760 [mm Hg] Source: PAC Chemical Database, U.S. Department of Energy
- Boiling Point: 6512 °F Source: The National Institute for Occupational Safety and Health (NIOSH)
- Color/Form: White, very fine powder Source: Hazardous Substances Data Bank (HSDB)
- Color/Form: White powder, either light or heavy depending upon whether it is prepared by heating magnesium carbonate or the basic magnesium carbonate Source: Hazardous Substances Data Bank (HSDB)
- Color/Form: Colorless, transparent cubic crystals Source: Hazardous Substances Data Bank (HSDB)
- Density: 3.58 (NIOSH, 2024) - Denser than water; will sink Source: CAMEO Chemicals
- Density: 3.6 g/cu cm Source: Hazardous Substances Data Bank (HSDB)
- Density: Relative density (water = 1): 3.6 Source: ILO-WHO International Chemical Safety Cards (ICSCs)
- Density: 3.58 Source: Occupational Safety and Health Administration (OSHA)
- Density: 3.6 @25 °C Source: PAC Chemical Database, U.S. Department of Energy
- Density: 3.58 Source: The National Institute for Occupational Safety and Health (NIOSH)
- Melting Point: 5072 °F (NIOSH, 2024) Source: CAMEO Chemicals
- Melting Point: 2825 °C Source: Hazardous Substances Data Bank (HSDB)
- Melting Point: 2800 °C Source: ILO-WHO International Chemical Safety Cards (ICSCs)
- Melting Point: 5072 °F Source: Occupational Safety and Health Administration (OSHA)
- Melting Point: 2825 °C Source: PAC Chemical Database, U.S. Department of Energy
- Melting Point: 5072 °F Source: The National Institute for Occupational Safety and Health (NIOSH)
- Odor: Odorless Source: Hazardous Substances Data Bank (HSDB)
- Physical Description: Magnesium oxide appears as a white solid, often found as a powder. When fine particles of magnesium oxide are dispersed in air, whether directly or when generated by the burning or cutting of magnesium metal, the resulting magnesium oxide fume is an inhalation hazard. Source: CAMEO Chemicals
- Physical Description: Other Solid; Wet Solid; Dry Powder; Large Crystals; Other Solid; CBI; Large Crystals; Dry Powder; Large Crystals; Dry Powder; Other Solid; Liquid Source: EPA Chemical Data Reporting (CDR)
- Physical Description: A very bulky, white powder known as light magnesium oxide or a relative dense, white powder known as heavy magnesium oxide. 5 g of light magnesium oxide occupy a volume of at least 33 ml, while 5 g of heavy magnesium oxide occupy a volume of not more than 20 ml Source: EU Food Improvement Agents
- Physical Description: Finely divided white particulate dispersed in air; Note: Exposure may occur when magnesium is burned, thermally cut, or welded upon; [NIOSH] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Physical Description: Solid Source: Human Metabolome Database (HMDB)
- Physical Description: HYGROSCOPIC FINE WHITE POWDER. Source: ILO-WHO International Chemical Safety Cards (ICSCs)
- Physical Description: A white solid, often found as a powder. Source: Occupational Safety and Health Administration (OSHA)
- Physical Description: Finely divided white particulate dispersed in air. [Note: Exposure may occur when magnesium is burned, thermally cut, or welded upon.] Source: The National Institute for Occupational Safety and Health (NIOSH)
- Refractive Index: Index of refraction: 1.7355 at 589 nm; 1.7283 at 750 nm Source: Hazardous Substances Data Bank (HSDB)
- Solubility: 0.009 % at 86 °F (NIOSH, 2024) Source: CAMEO Chemicals
- Solubility: Practically insoluble in water. Insoluble in ethanol Source: EU Food Improvement Agents
- Solubility: Soluble in acids and ammonium salt solutions Source: Hazardous Substances Data Bank (HSDB)
- Solubility: Insoluble in ethanol Source: Hazardous Substances Data Bank (HSDB)
- Solubility: In water, 86 mg/L at 30 °C Source: Hazardous Substances Data Bank (HSDB)
- Solubility: Solubility in water: poor Source: ILO-WHO International Chemical Safety Cards (ICSCs)
- Solubility: (86 °F): 0.009% Source: The National Institute for Occupational Safety and Health (NIOSH)
- Vapor Pressure: 0 mmHg (approx) (NIOSH, 2024) Source: CAMEO Chemicals
- Vapor Pressure: 0 mmHg (approx) Source: Occupational Safety and Health Administration (OSHA)
- Vapor Pressure: 51.5 [mm Hg] @2832 °C Source: PAC Chemical Database, U.S. Department of Energy
- Vapor Pressure: 0 mmHg (approx) Source: The National Institute for Occupational Safety and Health (NIOSH)
- pH: pH = 10.3 (saturated aqueous solution) Source: Hazardous Substances Data Bank (HSDB)
- Exposure Routes: The substance can be absorbed into the body by inhalation of dust or fume. Source: ILO-WHO International Chemical Safety Cards (ICSCs)
- Exposure Routes: inhalation, skin and/or eye contact Source: The National Institute for Occupational Safety and Health (NIOSH)
- First Aid: Excerpt from NIOSH Pocket Guide for Magnesium oxide fume:; Breathing: RESPIRATORY SUPPORT - If a person breathes large amounts of this chemical, move the exposed person to fresh air at once. If breathing has stopped, perform artificial respiration. Keep the affected person warm and at rest. Get medical attention as soon as possible. (NIOSH, 2024) Source: CAMEO Chemicals
- First Aid: (General first aid procedures); Breathing: Respiratory support Source: The National Institute for Occupational Safety and Health (NIOSH)
- GHS Hazard Statements: Not Classified; Reported as not meeting GHS hazard criteria by 1586 of 1807 companies Source: European Chemicals Agency (ECHA)
- ECHA C&L Notifications Summary: Aggregated GHS information provided per 1807 reports by companies from 23 notifications to the ECHA C&L Inventory.; Reported as not meeting GHS hazard criteria per 1586 of 1807 reports by companies.; There are 20 notifications provided by 221 of 1807 reports by companies with hazard statement code(s).; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Source: European Chemicals Agency (ECHA)
- Signal: Warning Source: NITE-CMC
- GHS Hazard Statements: H319: Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H335: May cause respiratory irritation [Warning Specific target organ toxicity, single exposure; Respiratory tract irritation] Source: NITE-CMC
- Precautionary Statement Codes: P261, P264+P265, P271, P280, P304+P340, P305+P351+P338, P319, P337+P317, P403+P233, P405, and P501 (click each P-code to see the statement) Source: NITE-CMC
- Target Organs: Eyes, respiratory system Source: The National Institute for Occupational Safety and Health (NIOSH)
- Consumer Uses: Processing aids not otherwise specified; Deodorizer; Fuel agents; pH regulating agent; Flavoring and nutrient; Insulators; Polymerization promoter; Binder; Other; Surface modifier; Adsorbent; Flux agent; Absorbent; Catalyst; Not Known or Reasonably Ascertainable; Filler; Soil amendments (fertilizers); Stabilizing agent Source: EPA Chemical Data Reporting (CDR)
- Industry Uses: Flux agent; Absorbent; Stabilizing agent; Catalyst; Corrosion inhibitor; Thickening agent; Filler; Not Known or Reasonably Ascertainable; Soil amendments (fertilizers); Hardener; Pigment; Processing aids, specific to petroleum production; Intermediate; Adsorbent; Polymerization promoter; Flavoring and nutrient; Insulators; Other; Processing aids not otherwise specified; Plating agent; Chemical reaction regulator; Fuel agents; pH regulating agent Source: EPA Chemical Data Reporting (CDR)
- Sources/Uses: Used in medications, animal feeds, fertilizers, insulation, wallboard, electrical heating rods, crucibles, fire bricks, petroleum additives, boiler scale control agents, and food additives; [HSDB] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Industrial Processes with risk of exposure: Farming (Feed Additives) [Category: Industry] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Uses: Both oil base and water base fracturing fluids are being used in the fracturing industry. Water base, which includes alcohol-water mixtures and low strength acids, make up the majority of treating fluids. The common chemicals added to these fluids are polymers for viscosity development, crosslinkers for viscosity enhancement, pH control chemicals, gel breakers for polymer degradation following the treatment, surfactants, clay stabilizers, alcohol, bactericides, fluid loss additives and friction reducer. /Hydraulic fracturing/ Source: Hazardous Substances Data Bank (HSDB)
- Uses: Hydraulic fracturing uses a specially blended liquid which is pumped into a well under extreme pressure causing cracks in rock formations underground. These cracks in the rock then allow oil and natural gas to flow, increasing resource production. ... Chemical Name: Magnesium oxide; Chemical Purpose: Allows a delayed break down of the gel; Product Function: Breaker. Source: Hazardous Substances Data Bank (HSDB)
- Uses: For magnesium oxide (USEPA/OPP Pesticide Code: 009235) there are 0 labels match. /SRP: Not registered for current use in the U.S., but approved pesticide uses may change periodically and so federal, state and local authorities must be consulted for currently approved uses./ Source: Hazardous Substances Data Bank (HSDB)
- Uses: CHEM INT MEDICINALS AND OTHER CHEMS; COMPONENT OF ANIMAL FEEDS, FERTILIZERS, INSULATION, AND WALLBOARD; COMPONENT OF PETROLEUM ADDITIVES, OXYCHLORIDE AND OXYSULFATE CEMENT; AGENT IN PULP AND PAPER MFR; FOOD CHEM; RUBBER ACCELERATOR; COMPONENT OF ELECTRICAL HEATING RODS; MISC APPLICATIONS Source: Hazardous Substances Data Bank (HSDB)
- Uses: For more Uses (Complete) data for MAGNESIUM OXIDE (12 total), please visit the HSDB record page. Source: Hazardous Substances Data Bank (HSDB)
Mis en correspondance par: Existing checksum-valid CAS to unique PubChem CID match. Récupéré le: 2026-08-31. Ouvrir la fiche source
Les classifications scientifiques et les annotations de danger apportent du contexte et ne remplacent pas la décision réglementaire propre au marché indiquée ci-dessus.
Couverture des sources complémentaires et état des correspondances
| Source | Résultat | Vérifié |
|---|---|---|
| NIH PubChem PUG-View | Correspondance exacte | 2026-08-31 |
Une absence de correspondance enregistrée est une preuve utile que la source a été vérifiée ; ce n’est pas l’affirmation que la substance n’existe pas ailleurs.
Récupéré depuis NIH PubChem le 2026-08-31 par correspondance CAS à somme de contrôle valide. Les propriétés chimiques ne remplacent pas la décision réglementaire de cette page.
Preuves officielles sur le nom d’ingrédient de l’UE
Le nom de l’ingrédient correspond exactement au glossaire officiel 2025 de l’UE des dénominations communes d’ingrédients.
Preuves d’inventaire associées
Ingrédients ayant des fonctions de formulation communes
Sources officielles et scientifiques complémentaires
11 bases de données externes pour vérifier cette identité
Chaque lien lance une recherche de cette identité dans la source concernée. Ce qu’est chaque source et sa valeur juridique
Comment MAGNESIUM OXIDE apparaît dans l’inventaire CosIng
L’inventaire CosIng répertorie MAGNESIUM OXIDE comme ingrédient cosmétique et cette page l’associe à 0 fiche d’annexe. L’entrée d’inventaire reprend les noms et identifiants, tandis que la fiche d’annexe indique où la substance est interdite, soumise à restrictions ou inscrite sur une liste positive dans le droit de l’UE sur les cosmétiques.
MAGNESIUM OXIDE est aussi associé à 3 fonctions cosmétiques dans les données officielles. Les désignations de fonction décrivent l’usage prévu, mais ne remplacent pas l’examen réglementaire des fiches d’annexe associées avant un travail de formulation ou d’étiquetage.
Questions fréquentes
Note de source pour MAGNESIUM OXIDE
Cette page reproduit l’entrée d’inventaire CosIng de MAGNESIUM OXIDE issue de documents publics de la Commission européenne sur les ingrédients cosmétiques et affiche les identifiants associés, même si aucune correspondance directe avec une annexe n’est actuellement rattachée.
Utilisez cette page d’inventaire pour étudier MAGNESIUM OXIDE et comparer les fiches associées, mais vérifiez les restrictions et le statut juridique auprès du texte officiel en vigueur et de la législation avant toute décision réglementaire.
Outils et étapes suivantes
Vérifiez votre formule
Analysez une liste INCI complète pour détecter MAGNESIUM OXIDE et les éventuelles restrictions d’annexes de l’UE ou signalements d’allergènes associés.
Vérificateur INCIRechercher des ingrédients similaires
Trouvez d’autres ingrédients de l’inventaire et entrées d’annexe liés à MAGNESIUM OXIDE, à ses identifiants ou à des variantes de nom proches.
Rechercher