DIETHYLHEXYL ADIPATE
Cette fiche confirme une dénomination commune officielle d’ingrédient pour l’étiquetage des produits cosmétiques de l’UE. Elle ne confirme pas à elle seule que la substance est autorisée, non restreinte ou sûre.
Aperçu des preuves mondiales
L’identité résolue présente des preuves réglementaires correspondantes dans 1 des 13 jeux de données de marchés indexés : 1 fiches de pays et 0 fiches d’annexes de l’UE. Chaque résultat et chaque lacune de preuves sont énumérés ci-dessous.
Identité résolue de la substance
Bis(2-ethylhexyl) adipate
2 noms correspondants ou signalés
Preuves réglementaires dans les 13 marchés
Ouvrez chaque fiche correspondante pour connaître son champ d’application, sa concentration, ses conditions, ses avertissements et la version de la source officielle.
Balayez ou faites défiler horizontalement pour voir la couverture des jeux de données et les actions suivantes.
| Marché | Résultat | Fiches | Jeu de données | Signification / action suivante |
|---|---|---|---|---|
| European Union EU | Aucune correspondance trouvée | 0 | Complete annex dataset Regulation (EC) 1223/2009 consolidated to 1 May 2026 | No annex match only means that these five annexes did not return a match; CosIng identity data and other EU obligations still need review. |
| Great Britain GB | Aucune correspondance trouvée | 0 | Complete consolidated annex dataset GB retained Regulation 1223/2009 schedules, effective 15 August 2026 | No annex match is not approval and does not cover Northern Ireland, which follows the applicable EU framework. |
| Canada CA | Restricted | 1Ouvrir la fiche 1 | Complete Hotlist snapshot Health Canada Cosmetic Ingredient Hotlist, 13 August 2025 | Examinez chaque fiche associée et ses conditions exactes. |
| New Zealand NZ | Aucune correspondance trouvée | 0 | Complete schedules dataset Cosmetic Products Group Standard schedules effective 1 January 2026 | The searchable spreadsheet is an aid; the legal Group Standard and incorporated notices remain authoritative. |
| ASEAN ASEAN | Aucune correspondance trouvée | 0 | Complete regional annex dataset ASEAN Cosmetic Directive annexes 2026-1, 22 June 2026 | Regional annex coverage does not replace member-state implementation dates, notifications or national deviations. |
| China CN | Aucune correspondance trouvée | 0 | Complete prohibited catalogues plus official-source workflow NMPA 2021 banned catalogues plus dynamic IECIC List I/List II system current since 2025 | IECIC listing is not blanket approval; absence may require the new cosmetic ingredient route, and restrictions are checked separately. |
| Japan JP | Aucune correspondance trouvée | 0 | Complete Standards appendices dataset MHLW Standards for Cosmetics official English source and Japanese amendments checked for the imported snapshot | The Japanese text and subsequent notices are canonical; no local match is not a product-compliance conclusion. |
| South Korea KR | Aucune correspondance trouvée | 0 | Complete current appendix dataset MFDS Notice 2026-19, effective 18 March 2026 | Korean source wording is canonical and other positive lists/notices may still apply to the formulation. |
| United States US | Aucune correspondance trouvée | 0 | Complete enumerated federal ingredient rules eCFR Title 21 issue date 27 August 2026 | FDA has no general approved-cosmetic-ingredient catalogue; absence from these sections is not approval or proof of safety. |
| Australia AU | Aucune correspondance trouvée | 0 | Complete cosmetic-relevant Poisons Standard subset plus official workflow Therapeutic Goods (Poisons Standard—June 2026) Instrument 2026 | An AICIS Inventory match is not cosmetic approval; no Inventory match can indicate a new, exempted, reported or confidential introduction. |
| Brazil BR | Aucune correspondance trouvée | 0 | Complete prohibited dataset plus current restricted-list workflow ANVISA RDC 1.029/2026 and RDC 1.030/2026, published 15 June 2026 | RDC 1.030/2026 amends rather than replaces the prohibited baseline, and the second restricted-list revision was still under consultation in July 2026. |
| India IN | Aucune correspondance trouvée | 0 | Complete current Part 2 dataset plus official workflow for Parts 1, 3 and 4 Cosmetics Rules 2020 plus current BIS IS 4707 parts (1:2020, 2:2025, 3:2025, 4:2022) | The standards are separate controlled publications; absence from a locally indexed excerpt is not permission. |
| Saudi Arabia SA | Aucune correspondance trouvée | 0 | Complete official list index SFDA live prohibited/restricted lists, snapshot 30 August 2026 | No list match is not permission; Gulf/SFDA product, claim, notification and technical requirements still apply. |
Fiches de marché correspondantes et conditions
Identité et propriétés chimiques

Bis(2-ethylhexyl) adipate
Bis(2-ethylhexyl) adipate is a diester resulting from the formal condensation of the carboxy groups of adipic acid with 2-ethylhexan-1-ol. It is used as a plasticiser in the preparation of various polymers. It has a role as a plasticiser. It is a member of dicarboxylic acids and O-substituted derivatives, a carboxylic ester and a diester. It is functionally related to a 2-ethylhexan-1-ol and an adipic acid. — ChEBI
- Nom IUPAC
- bis(2-ethylhexyl) hexanedioate
- Formule moléculaire
- C22H42O4
- Masse moléculaire
- 370.6 g/mol
- Masse exacte
- 370.30830982 Da
- XLogP3
- 6,8
- Surface polaire topologique
- 52,6 Ų
- Donneurs de liaisons hydrogène
- 0
- Accepteurs de liaisons hydrogène
- 4
- Unités covalentes
- 1
- Stéréocentres définis
- 0
Également connu sous le nom de
16 autres noms signalés
Identifiants de bases de données externes
- ChEBI:CHEBI:34675
- ChEMBL:CHEMBL1414950
- EPA DTXSID:DTXSID0020606
- PubMed:22346617
- PubMed:21783615
- PubMed:21714626
- PubMed:21575223
- PubMed:21400322
- PubMed:20681565
- PubMed:20414453
- PubMed:20392686
- PubMed:20352652
- PubMed:20334193
- PubMed:19957297
- PubMed:19842066
Preuves issues de bases de données scientifiques complémentaires
EMBL-EBI ChEBI
bis(2-ethylhexyl) adipate
A diester resulting from the formal condensation of the carboxy groups of adipic acid with 2-ethylhexan-1-ol. It is used as a plasticiser in the preparation of various polymers.
- Formule
- C22H42O4
- Masse moyenne
- 370.574 g/mol
- Masse monoisotopique
- 370.30831 Da
- Charge formelle
- 0
- diester — is a (CHEBI:51307)
- carboxylic ester — is a (CHEBI:33308)
- dicarboxylic acids and O-substituted derivatives — is a (CHEBI:131927)
- plasticiser — has role (CHEBI:79056)
- 2-ethylhexan-1-ol — has functional parent (CHEBI:16011)
- adipic acid — has functional parent (CHEBI:30832)
- plasticiser — has role (CHEBI:79056)
- diester — is a (CHEBI:51307)
- carboxylic ester — is a (CHEBI:33308)
- dicarboxylic acids and O-substituted derivatives — is a (CHEBI:131927)
Noms supplémentaires validés
Références croisées de cette source
- CAS: 103-23-1 — KEGG COMPOUND
- CAS: 103-23-1 — ChemIDplus
- CAS: 103-23-1 — NIST Chemistry WebBook
- REGISTRY_NUMBER: 1803774 — Reaxys
- MANUAL_X_REF: Bis(2-ethylhexyl)_adipate — Wikipedia
- MANUAL_X_REF: C14240 — KEGG COMPOUND
- MANUAL_X_REF: HMDB0040270 — HMDB
Mis en correspondance par: Exact CAS cross-reference in the ChEBI compound record. Source mise à jour le: 2016-05-16. Récupéré le: 2026-08-31. Ouvrir la fiche source
NIH PubChem PUG-View
Attributed physical-property, hazard, environmental and use annotations.
- Autoignition Temperature: 710 °F (NTP, 1992) Source: CAMEO Chemicals
- Autoignition Temperature: 710 °F (377 °C) Source: Hazardous Substances Data Bank (HSDB)
- Boiling Point: 783 °F at 760 mmHg (NTP, 1992) Source: CAMEO Chemicals
- Boiling Point: 214 °C @ 5 mm Hg Source: Hazardous Substances Data Bank (HSDB)
- Boiling Point: 416.00 to 418.00 °C. @ 760.00 mm Hg Source: Human Metabolome Database (HMDB)
- Color/Form: COLORLESS OR VERY PALE AMBER LIQ Source: Hazardous Substances Data Bank (HSDB)
- Color/Form: Light colored, oily liquid. Source: Hazardous Substances Data Bank (HSDB)
- Density: 0.923 (USCG, 1999) - Less dense than water; will float Source: CAMEO Chemicals
- Density: 0.922 @ 25 °C/4 °C Source: Hazardous Substances Data Bank (HSDB)
- Density: 0.922 @25 °C Source: PAC Chemical Database, U.S. Department of Energy
- Flash Point: 385 °F (NTP, 1992) Source: CAMEO Chemicals
- Flash Point: 196 °C Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Flash Point: 402 °F (206 °C) (OPEN CUP) Source: Hazardous Substances Data Bank (HSDB)
- Melting Point: -90 °F (NTP, 1992) Source: CAMEO Chemicals
- Melting Point: -67.8 °C Source: Hazardous Substances Data Bank (HSDB)
- Melting Point: -67.8 °C Source: Human Metabolome Database (HMDB)
- Melting Point: -67.8 °C Source: PAC Chemical Database, U.S. Department of Energy
- Odor: SLIGHT AROMATIC SMELL Source: Hazardous Substances Data Bank (HSDB)
- Odor: Odorless Source: Hazardous Substances Data Bank (HSDB)
- Odor: Mild Source: Hazardous Substances Data Bank (HSDB)
- Physical Description: Bis(2-ethylhexyl) adipate is a colorless to straw-colored liquid with a mild odor. Floats on water. (USCG, 1999) Source: CAMEO Chemicals
- Physical Description: Large Crystals; Liquid; Liquid; Liquid; Other Solid; CBI Source: EPA Chemical Data Reporting (CDR)
- Physical Description: Light-colored, oily liquid; [Hawley] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Physical Description: Liquid Source: Human Metabolome Database (HMDB)
- Refractive Index: Index of refraction: 1.4474 @ 20 °C/D Source: Hazardous Substances Data Bank (HSDB)
- Solubility: less than 0.1 mg/mL at 72 °F (NTP, 1992) Source: CAMEO Chemicals
- Solubility: SOL IN MOST ORG SOLVENTS; INSOL OR VERY SLIGHTLY SOL IN GLYCERINE & GLYCOLS Source: Hazardous Substances Data Bank (HSDB)
- Solubility: Soluble in ethanol, ethyl ether, acetone, and acetic acid Source: Hazardous Substances Data Bank (HSDB)
- Solubility: In water, 0.78 mg/l @ 22 °C Source: Hazardous Substances Data Bank (HSDB)
- Solubility: 0.00078 mg/mL at 22 °C Source: Human Metabolome Database (HMDB)
- Vapor Pressure: less than 0.01 mmHg at 68 °F ; 2.6 mmHg at 392 °F (NTP, 1992) Source: CAMEO Chemicals
- Vapor Pressure: 0.00000085 [mmHg] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Vapor Pressure: 8.5X10-7 mm Hg at 20 °C Source: Hazardous Substances Data Bank (HSDB)
- Viscosity: 13.7 cP @ 20 °C Source: Hazardous Substances Data Bank (HSDB)
- pH: Acidity: 0.25 (meg/100 gm. max) Source: Hazardous Substances Data Bank (HSDB)
- IARC Carcinogenic Agent: Di(2-ethylhexyl) adipate Source: International Agency for Research on Cancer (IARC)
- IARC Carcinogenic Classes: Group 3: Not classifiable as to its carcinogenicity to humans Source: International Agency for Research on Cancer (IARC)
- IARC Monographs: Volume Sup 7: Overall Evaluations of Carcinogenicity: An Updating of IARC Monographs Volumes 1 to 42, 1987; 440 pages; ISBN 92-832-1411-0 (out of print); Volume 77: (2000) Some Industrial Chemicals Source: International Agency for Research on Cancer (IARC)
- Publication Year: 2000 Source: International Agency for Research on Cancer (IARC)
- Evaluation Year: 2000 Source: International Agency for Research on Cancer (IARC)
- Substance: Di(2-ethylhexyl) adipate Source: NTP Technical Reports
- NTP Technical Report: TR-212: Carcinogenesis Bioassay of Di(2-ethylhexyl)adipate (CASRN 103-23-1) in F344 Rats and B6C3F1 Mice (Feed Study) (1982 ) Source: NTP Technical Reports
- Peer Review Date: 06/27/80 Source: NTP Technical Reports
- Conclusion for Male Rat: No Evidence Source: NTP Technical Reports
- Conclusion for Female Rat: No Evidence Source: NTP Technical Reports
- Conclusion for Male Mice: Clear Evidence Source: NTP Technical Reports
- Conclusion for Female Mice: Clear Evidence Source: NTP Technical Reports
- First Aid: EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.; SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. IMMEDIATELY call a hospital or poison control center even if no symptoms (such as redness or irritation) develop. IMMEDIATELY transport the victim to a hospital for treatment after washing the affected areas.; INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. IMMEDIATELY call a physician and be prepared to transport the victim to a hospital even if no symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop. Provide proper respiratory protection to rescuers entering an unknow Source: CAMEO Chemicals
- Note: This chemical does not meet GHS hazard criteria for 96.5% (1012 of 1049) of all reports. Source: European Chemicals Agency (ECHA)
- GHS Hazard Statements: Not Classified; Reported as not meeting GHS hazard criteria by 1012 of 1049 companies (only 3.5% companies provided GHS information). For more detailed information, please visit ECHA C&L website. Source: European Chemicals Agency (ECHA)
- ECHA C&L Notifications Summary: Aggregated GHS information provided per 1049 reports by companies from 12 notifications to the ECHA C&L Inventory.; Reported as not meeting GHS hazard criteria per 1012 of 1049 reports by companies.; There are 10 notifications provided by 37 of 1049 reports by companies with hazard statement code(s).; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Source: European Chemicals Agency (ECHA)
- GHS Hazard Statements: Not Classified; Reported as not meeting GHS hazard criteria by 1 of 1 companies. For more detailed information, please visit ECHA C&L website. Source: European Chemicals Agency (ECHA)
- Signal: Warning Source: NITE-CMC
- GHS Hazard Statements: H410: Very toxic to aquatic life with long lasting effects [Warning Hazardous to the aquatic environment, long-term hazard] Source: NITE-CMC
- Precautionary Statement Codes: P273, P391, and P501 (click each P-code to see the statement) Source: NITE-CMC
- GHS Hazard Statements: H336: May cause drowsiness or dizziness [Warning Specific target organ toxicity, single exposure; Narcotic effects]; H361: Suspected of damaging fertility or the unborn child [Warning Reproductive toxicity] Source: NITE-CMC
- Precautionary Statement Codes: P203, P261, P271, P280, P304+P340, P318, P319, P403+P233, P405, and P501 (click each P-code to see the statement) Source: NITE-CMC
- GHS Hazard Statements: H400: Very toxic to aquatic life [Warning Hazardous to the aquatic environment, acute hazard]; H410: Very toxic to aquatic life with long lasting effects [Warning Hazardous to the aquatic environment, long-term hazard] Source: NITE-CMC
- GHS Hazard Statements: Not Classified Source: NITE-CMC
- GHS Hazard Statements: H316: Causes mild skin irritation [Warning Skin corrosion/irritation]; H361: Suspected of damaging fertility or the unborn child [Warning Reproductive toxicity] Source: NITE-CMC
- NFPA Health Rating: 0 - Materials that, under emergency conditions, would offer no hazard beyond that of ordinary combustible materials. Source: Hazardous Substances Data Bank (HSDB)
- NFPA Fire Rating: 1 - Materials that must be preheated before ignition can occur. Materials require considerable preheating, under all ambient temperature conditions, before ignition and combustion can occur. Source: Hazardous Substances Data Bank (HSDB)
- NFPA Instability Rating: 0 - Materials that in themselves are normally stable, even under fire conditions. Source: Hazardous Substances Data Bank (HSDB)
- Target Organs: Developmental; Hepatic; Musculoskeletal; Urinary Source: EPA Integrated Risk Information System (IRIS)
- Cosmetic Ingredient Review Finding(s): Safe in the present practices of use and concentration. Ingredient, concentration, and use information are available in documents discoverable at https://cir-reports.cir-safety.org Source: Cosmetic Ingredient Review (CIR)
- Environmental Bioconcentration: A whole-fish BCF of 27 was observed for blue-gill fish exposed to bis(2-ethylhexyl) adipate levels of 250 ug/l for a 28-day period(1). According to a classification scheme(2), this measured BCF value suggests the potential for bioconcentration in aquatic organisms is low. Source: Hazardous Substances Data Bank (HSDB)
- Environmental Fate: TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 49,000(SRC), determined from a structure estimation method(2), indicates that bis(2-ethylhexyl) adipate is expected to be immobile in soil(SRC). The dominant degradation process in the soil environment is expected to be microbial degradation. Biodegradation test results indicate that bis(2-ethylhexyl) adipate is readily biodegradable(3,4). Therefore, the dominant degradation process in the soil environment is expected to be microbial degradation(SRC). Volatilization of bis(2-ethylhexyl) adipate from moist soil surfaces is not expected to be an important fate process(SRC) given a Henry's Law constant of 4.34X10-7atm-cu m/mole(3). Bis(2-ethylhexyl) adipate is not expected to volatilize from dry soil surfaces(SRC) based upon a vapor pressure of 8.5X10-7mm Hg(3). Source: Hazardous Substances Data Bank (HSDB)
- Environmental Fate: AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 49,000(SRC), determined from an estimation method(2), indicates that bis(2-ethylhexyl) adipate is expected to adsorb to suspended solids and sediment in water(SRC). Biodegradation test results indicate that bis(2-ethylhexyl) adipate is readily biodegradable(4). Therefore, the dominant degradation process in the aquatic environment is expected to be microbial degradation(4). Volatilization from water surfaces is not expected(3) based upon a Henry's Law constant of 4.34X10-7 atm-cu m/mole(4). According to a classification scheme(5), a BCF of 27(4), suggests the potential for bioconcentration in aquatic organisms is low. Bis(2-ethylhexyl) adipate is expected to hydrolyze producing 2-ethylhexanol and hexanoic acid(SRC). Estimated hydrolysis half-lives are 3 years and 120 days at pH values of 7 and 8, respectively(6). Source: Hazardous Substances Data Bank (HSDB)
- Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), bis(2-ethylhexyl) adipate, which has a vapor pressure of 8.5X10-7 mm Hg at 20 °C(3), will exist in both the vapor and particulate phases in the ambient atmosphere. Vapor-phase bis(2-ethylhexyl) adipate is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 0.63 days(SRC), calculated from its rate constant of 2.5X10-11 cu cm/molecule-sec at 25 °C(4) determined using a structure estimation method(2). Particulate-phase bis(2-ethylhexyl) adipate may be removed from the air by wet and dry deposition(SRC). Bis(2-ethylhexyl) adipate may undergo direct photolysis in the environment, since this compound contains a functional group that can absorb light >290 nm(5). Source: Hazardous Substances Data Bank (HSDB)
- Consumer Uses: Anti-caking agent; Fragrance; Plasticizer; Binder; Lubricating agent; Emulsifier; Diluent; Not Known or Reasonably Ascertainable Source: EPA Chemical Data Reporting (CDR)
- Industry Uses: Dispersing agent; Solvent; Polymerization promoter; Fragrance; Plasticizer; Flavoring and nutrient; Fixing agent (mordant); Wetting agent (non-aqueous); Other; Binder; Lubricating agent; Emulsifier; Diluent; Not Known or Reasonably Ascertainable; Laboratory chemicals Source: EPA Chemical Data Reporting (CDR)
- Cosmetic Ingredient Review Link: CIR ingredient: Diethylhexyl Adipate Source: Cosmetic Ingredient Review (CIR)
- Sources/Uses: Used as a plasticizer, in processing polyvinyl and other polymers, as a solvent, in aircraft lubricants, and in hydraulic fluids; [HSDB] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Uses: Plasticizer, commonly blended with general purpose plasticizers, such as /di-n-octyl phthalate/ and /diisooctyl phthalate/ in processing polyvinyl and other polymers; solvent; aircraft lubes Source: Hazardous Substances Data Bank (HSDB)
- Uses: Functional (hydraulic) fluid Source: Hazardous Substances Data Bank (HSDB)
- Uses: Plasticizer or solvent in the following cosmetics: bath oils, eye shadow, cologne, foundations, rouge, blusher, nail-polish remover, moisturizers and indoor tanning preparations Source: Hazardous Substances Data Bank (HSDB)
- Uses: ... PVC film now used in meat wrapping operations contains bis(2-ethyl hexyl) adipate (DOA) as its major plasticizer. Source: Hazardous Substances Data Bank (HSDB)
- Uses: Plastics -> Typical concentration range in plastic materials -> 10.0 - 35.0% Source: NORMAN Suspect List Exchange
Mis en correspondance par: Existing checksum-valid CAS to unique PubChem CID match. Récupéré le: 2026-08-31. Ouvrir la fiche source
Les classifications scientifiques et les annotations de danger apportent du contexte et ne remplacent pas la décision réglementaire propre au marché indiquée ci-dessus.
Couverture des sources complémentaires et état des correspondances
| Source | Résultat | Vérifié |
|---|---|---|
| EMBL-EBI ChEBI | Correspondance exacte | 2026-08-31 |
| NIH PubChem PUG-View | Correspondance exacte | 2026-08-31 |
Une absence de correspondance enregistrée est une preuve utile que la source a été vérifiée ; ce n’est pas l’affirmation que la substance n’existe pas ailleurs.
Récupéré depuis NIH PubChem le 2026-09-02 par correspondance CAS à somme de contrôle valide. Les propriétés chimiques ne remplacent pas la décision réglementaire de cette page.
Recherche complémentaire sur la substance auprès de sources faisant autorité
Chaque lien lance une recherche de cette identité dans la source concernée. Un lien est une piste de recherche, et non l’affirmation que la source détient une fiche exacte. Ce qu’est chaque source et sa valeur juridique
Aller plus loin avec cette fiche
Source officielle et champ d’application
Importé de la décision d’exécution (UE) 2025/1175 de la Commission (version du jeu de données EU 2025/1175). Le glossaire fournit les dénominations communes des ingrédients pour la liste d’ingrédients exigée par l’article 19, paragraphe 1, point g) ; ce n’est ni une liste d’autorisation ni une liste de sécurité.
Ouvrir la décision officielle