Aller au contenu principal
Nom officiel d’étiquetage de l’UEEntrée 29421 du glossaire

TRIPHENYL PHOSPHATE

Cette fiche confirme une dénomination commune officielle d’ingrédient pour l’étiquetage des produits cosmétiques de l’UE. Elle ne confirme pas à elle seule que la substance est autorisée, non restreinte ou sûre.

Aperçu des preuves mondiales

L’identité résolue présente des preuves réglementaires correspondantes dans 0 des 13 jeux de données de marchés indexés : 0 fiches de pays et 0 fiches d’annexes de l’UE. Chaque résultat et chaque lacune de preuves sont énumérés ci-dessous.

0 marchés avec preuves
Marchés vérifiés
13
Marchés avec preuves
0
Lacunes de preuves
13
Identifiants résolus
2

Identité résolue de la substance

CAS:115-86-6
EC:204-112-2
Fiches de l’index des ingrédients :
TRIPHENYL PHOSPHATE
Fonctions cosmétiques : PLASTICISER

Phosphoric acid, triphenyl ester

1 nom correspondant ou signalé
TRIPHENYL PHOSPHATE

Preuves réglementaires par marché

Aucun des 13 marchés suivis ici ne détient de règle importée sous le nom TRIPHENYL PHOSPHATE.

Il s’agit d’un constat sur cet inventaire, et non sur le droit : l’absence de règle importée n’est pas la preuve qu’une substance est autorisée. Une règle peut exister sous un autre nom, sous un numéro CAS ou CE que cette entrée du glossaire ne comporte pas, ou dans un jeu de données pas encore importé.

Identité et propriétés chimiques

Structure chimique 2D PubChem pour le CAS 115-86-6
CAS 115-86-6PubChem CID 8289

Triphenyl Phosphate

Triphenyl phosphate is an aryl phosphate resulting from the formal condensation of phosphoric acid with 3 mol eq. of phenol. It has a role as a plasticiser and a flame retardant. It is functionally related to a phenol. — ChEBI

Nom IUPAC
triphenyl phosphate
Formule moléculaire
C18H15O4P
Masse moléculaire
326.3 g/mol
Masse exacte
326.07079595 Da
XLogP3
4,6
Surface polaire topologique
44,8 Ų
Donneurs de liaisons hydrogène
0
Accepteurs de liaisons hydrogène
4
Unités covalentes
1
Stéréocentres définis
0

Également connu sous le nom de

TriphenylphosphatePhosphoric acid, triphenyl esterDisflamoll TPCelluflex TPPPhosflex TPPTriphenoxyphosphine oxideTrifenylfosfatPhenyl phosphate ((PhO)3PO)
16 autres noms signalés
YZE19Z66EANSC-57868Triphenyl phosphoric acid esterCHEBI:35033204-112-2Triphenyl ester of phosphoric acidRefChem:6331NSC 57868C18H15O4PPhosphoric Acid Triphenyl EsterTrifenylfosfat [Czech]CAS-115-86-6TPHPTPPACCRIS 4888HSDB 2536
Identifiants de bases de données externes

Preuves issues de bases de données scientifiques complémentaires

NIH PubChem PUG-View
Correspondance exacte d’identifiant8289

Attributed physical-property, hazard, environmental and use annotations.

  • First Aid: EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.; SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. IMMEDIATELY call a hospital or poison control center even if no symptoms (such as redness or irritation) develop. IMMEDIATELY transport the victim to a hospital for treatment after washing the affected areas.; INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. IMMEDIATELY call a physician and be prepared to transport the victim to a hospital even if no symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop. Provide proper respiratory protection to rescuers entering an unknow Source: CAMEO Chemicals
  • First Aid: (General first aid procedures); Breathing: Respiratory support; Swallow: Medical attention immediately - If this chemical has been swallowed, get medical attention immediately. Source: The National Institute for Occupational Safety and Health (NIOSH)
  • Note: This chemical does not meet GHS hazard criteria for 0.6% (9 of 1488) of reports. Source: European Chemicals Agency (ECHA)
  • Signal: Warning Source: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H400 (83.4%): Very toxic to aquatic life [Warning Hazardous to the aquatic environment, acute hazard]; H410 (86%): Very toxic to aquatic life with long lasting effects [Warning Hazardous to the aquatic environment, long-term hazard]; H411 (18.7%): Toxic to aquatic life with long lasting effects [Hazardous to the aquatic environment, long-term hazard] Source: European Chemicals Agency (ECHA)
  • Precautionary Statement Codes: P273, P391, and P501 (click each P-code to see the statement) Source: European Chemicals Agency (ECHA)
  • ECHA C&L Notifications Summary: Aggregated GHS information provided per 1488 reports by companies from 25 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Reported as not meeting GHS hazard criteria per 9 of 1488 reports by companies.; There are 24 notifications provided by 1479 of 1488 reports by companies with hazard statement code(s).; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Source: European Chemicals Agency (ECHA)
  • Signal: Warning Source: NITE-CMC
  • GHS Hazard Statements: H400: Very toxic to aquatic life [Warning Hazardous to the aquatic environment, acute hazard]; H411: Toxic to aquatic life with long lasting effects [Hazardous to the aquatic environment, long-term hazard] Source: NITE-CMC
  • Precautionary Statement Codes: P273, P391, and P501 (click each P-code to see the statement) Source: NITE-CMC
  • GHS Hazard Statements: H303: May be harmful if swallowed [Warning Acute toxicity, oral]; H320: Causes eye irritation [Warning Serious eye damage/eye irritation] Source: NITE-CMC
  • Precautionary Statement Codes: P264+P265, P301+P317, P305+P351+P338, and P337+P317 (click each P-code to see the statement) Source: NITE-CMC
  • Signal: Warning Source: Hazardous Substances Data Bank (HSDB)
  • GHS Hazard Statements: H400: Very toxic to aquatic life [Warning Hazardous to the aquatic environment, acute hazard]; H410: Very toxic to aquatic life with long lasting effects [Warning Hazardous to the aquatic environment, long-term hazard] Source: Hazardous Substances Data Bank (HSDB)
  • Cosmetic Ingredient Review Finding(s): Safe in the present practices of use and concentration. Ingredient, concentration, and use information are available in documents discoverable at https://cir-reports.cir-safety.org Source: Cosmetic Ingredient Review (CIR)
  • Toxicity Summary: IDENTIFICATION AND USE: Triphenyl phosphate (TPP) is a solid. It is used as fire-retarding agent, and a plasticizer for cellulose acetate and nitrocellulose. Triphenyl phosphate also has been found as one component of lubricating oil and hydraulic fluids. HUMAN STUDIES: It causes a delayed peripheral neuritis involving motor neurons, resulting in a flaccid paralysis, particularly of the distal muscles. No sensory disturbances. Potential symptoms of overexposure are minor changes in blood enzymes. In workers engaged in the manufacture of TPP there was some inhibition of plasma cholinesterase but no correlation of this effect with degree of exposure or with minor gastrointestinal or neuromuscular symptoms. A case of TPP allergy from spectacle frames was reported. TPP increased both 17beta-estradiol (E2) and testosterone concentrations in human H295R cells in vitro. In addition, transcription of four major steroidogenic genes was up-regulated and that of two sulfotransferase genes was down-regulated. Increase of TPP concentration in house dust was associated with a 10% increase in prolactin and a 19% decrease in sperm concentration in exposed men. ANIMAL STUDIES: Topical application o Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Bioconcentration: Bioconcentration factors (BCFs) of 180 to 280 have been measured in rainbow trout (Salmo gairdneri) exposed to Pydraul 50E (a hydraulic fluid containing 35% triphenyl phosphate) for 90 days in flowing water(1). A BCF range of 132 to 364 was observed for rainbow trout exposed to triphenyl phosphate in flowing water for 90 days(2). BCFs of 573 and 561 have been measured using static tests for radio-labelled triphenyl phosphate in rainbow trout and fathead minnows (Pimephales promelas), respectively(3). A bioaccumulation ratio (the rate of the initial uptake rate constant to the initial clearance rate constant) of 2,590 was determined for triphenyl phosphate in rainbow trout; however, this represents the worse-case estimate based on the total 14C content of whole fish after 24 hr exposure(4). A bioconcentration factor (BCF) for triphenyl phosphate of 250 was measured in killifish under static conditions and a BCF of 155 was measured in killifish in a flow through system(5). A BCF for triphenyl phosphate of 110 was observed in goldfish under static conditions(6). According to a classification scheme(7), this range of BCF values suggest that bioconcentration in aquatic organisms is high Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: TERRESTRIAL FATE: Based on a classification scheme(1), a Koc range of 2,514 to 3,561(2) indicates that triphenyl phosphate is expected to have slight mobility in soil(SRC). Volatilization of triphenyl phosphate from moist soil surfaces is expected to be an important fate process(SRC) given an estimated Henry's Law constant of 3.3X10-6 atm-cu m/mole(SRC), based upon its vapor pressure, 2.00X10-6 mm Hg(3), and water solubility, 1.9 mg/L(4). However, adsorption to soil is expected to attenuate volatilization(SRC). Triphenyl phosphate is not expected to volatilize from dry soil surfaces(SRC) based upon its vapor pressure(3). Mineralization half-lives of 37 and 32 days under aerobic and anaerobic conditions, respectively, using a loamy sand(2) suggest that biodegradation may be an important environmental fate process in soil(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: AQUATIC FATE: Based on a classification scheme(1), a Koc range of 2,514 to 3,561(2) indicates that triphenyl phosphate is expected to adsorb to suspended solids and sediment(SRC). Volatilization from water surfaces is expected(3) based upon an estimated Henry's Law constant of 3.3X10-6 atm-cu m/mole(SRC), derived from its vapor pressure, 2.00X10-6 mm Hg(4), and water solubility, 1.9 mg/L(5). Estimated volatilization half-lives for a model river and model lake are 20 and 152 days, respectively. However, volatilization from water surfaces is expected to be attenuated by adsorption to suspended solids and sediment in the water column. The estimated volatilization half-life from a model pond is 400 days if adsorption is considered(6). According to a classification scheme(7), bioconcentration factors ranging from 132(8) to 573(9) suggest that bioconcentration in aquatic organisms is high(SRC). Biodegradation half-lives of 2-4 days in river die-away tests(10) suggest that biodegradation may be an important environmental fate process in water(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), triphenyl phosphate, which has a vapor pressure of 2.00X10-6 mm Hg at 25 °C(2), will exist in both the vapor and particulate phases in the ambient atmosphere. Vapor-phase triphenyl phosphate is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 12 hours(SRC), calculated from its rate constant of 1.1X10-11 cu cm/molecule-sec at 25 °C(SRC) that was derived using a structure estimation method(3). Particulate-phase triphenyl phosphate may be removed from the air by wet and dry deposition(SRC). Triphenyl phosphate does not absorb light at wavelengths >290 nm(4) and, therefore, is not expected to be susceptible to direct photolysis by sunlight(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Cosmetic Ingredient Review Link: CIR ingredient: Triphenyl Phosphate Source: Cosmetic Ingredient Review (CIR)
  • Sources/Uses: Used as a plasticizer, fire-retardant, and substitute for camphor in celluloid; also used in lubricating oils and hydraulic fluids; [ACGIH] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Uses: Noncombustible substitute for camphor in celluloid; rendering acetylcellulose, nitrocellulose, airplane "dope", etc., stable and fireproof; impregnating roofing paper; plasticizer in lacquers and varnishes. Source: Hazardous Substances Data Bank (HSDB)
  • Uses: Fire-retarding agent, plasticizer for cellulose acetate and nitrocellulose. Source: Hazardous Substances Data Bank (HSDB)
  • Uses: /Triphenyl phosphate/ has been used as a plasticizer in automobile upholstery, as a fireproofing agent, as a noncombustible substitute for camphor in celluloid, and for impregnating roofing paper. Triphenyl phosphate also has been found as one component of lubricating oil and hydraulic fluids. Source: Hazardous Substances Data Bank (HSDB)
  • Uses: An early application was as a flame retardant for cellulose acetate safety film. It is also used in cellulose nitrate, various coatings, triacetate film and sheet, and rigid urethane foam. It has been used as a flame-retardant additive for engineering thermoplastics such as polyphenylene oxide-high impact polystyrene and ABS-polycarbonate blends. Source: Hazardous Substances Data Bank (HSDB)
  • Uses: Plastics -> Typical concentration range in plastic materials -> 2% Source: NORMAN Suspect List Exchange

Mis en correspondance par: Existing checksum-valid CAS to unique PubChem CID match. Récupéré le: 2026-08-31. Ouvrir la fiche source

Les classifications scientifiques et les annotations de danger apportent du contexte et ne remplacent pas la décision réglementaire propre au marché indiquée ci-dessus.

Couverture des sources complémentaires et état des correspondances
SourceRésultatVérifié
NIH PubChem PUG-ViewCorrespondance exacte2026-08-31

Une absence de correspondance enregistrée est une preuve utile que la source a été vérifiée ; ce n’est pas l’affirmation que la substance n’existe pas ailleurs.

Récupéré depuis NIH PubChem le 2026-08-31 par correspondance CAS à somme de contrôle valide. Les propriétés chimiques ne remplacent pas la décision réglementaire de cette page.

Recherche complémentaire sur la substance auprès de sources faisant autorité

Chaque lien lance une recherche de cette identité dans la source concernée. Un lien est une piste de recherche, et non l’affirmation que la source détient une fiche exacte. Ce qu’est chaque source et sa valeur juridique

Aller plus loin avec cette fiche

Analyser dans une formuleOuvrir la comparaison autonome

Source officielle et champ d’application

Importé de la décision d’exécution (UE) 2025/1175 de la Commission (version du jeu de données EU 2025/1175). Le glossaire fournit les dénominations communes des ingrédients pour la liste d’ingrédients exigée par l’article 19, paragraphe 1, point g) ; ce n’est ni une liste d’autorisation ni une liste de sécurité.

Ouvrir la décision officielle