Aller au contenu principal
CAS 0 fiche

CAS 124-13-0

Le CAS 124-13-0 correspond à 0 fiche d’annexe de l’UE dans les annexes II à VI du règlement (CE) n° 1223/2009.

Fiches pour le CAS 124-13-0

0 au total
Aucune fiche trouvée pour ce numéro CAS.

Identité et propriétés chimiques

Structure chimique 2D PubChem pour le CAS 124-13-0
CAS 124-13-0PubChem CID 454

Octanal

Octanal is a saturated fatty aldehyde formally arising from reduction of the carboxy group of caprylic acid (octanoic acid). It has a role as a plant metabolite. It is a n-alkanal, a saturated fatty aldehyde and a medium-chain fatty aldehyde. — ChEBI

Nom IUPAC
octanal
Formule moléculaire
C8H16O
Masse moléculaire
128.21 g/mol
Masse exacte
128.120115130 Da
XLogP3
2,7
Surface polaire topologique
17,1 Ų
Donneurs de liaisons hydrogène
0
Accepteurs de liaisons hydrogène
1
Unités covalentes
1
Stéréocentres définis
0

Également connu sous le nom de

CaprylaldehydeCaprylic aldehyden-Octanal1-octanaln-Octyl aldehyden-Caprylaldehyden-OctaldehydeOctanaldehyde
16 autres noms signalés
n-OctylalAldehyde C-8Octanoic aldehydeOctaldehydeC-8 aldehydeOCTYLALDEHYDE1-Octylaldehyde1-Octaldehyde1-CaprylaldehydeOctanal, tech.Octyl aldehydesFEMA No. 2797XGE9999H19NSC-1508NSC-8969CHEBI:17935
Identifiants de bases de données externes

Preuves issues de bases de données scientifiques complémentaires

NIH PubChem PUG-View
Correspondance exacte d’identifiant454

Attributed physical-property, hazard, environmental and use annotations.

  • First Aid: Call for medical aid.; INHALATION: Remove victim to fresh air; give oxygen if breathing is difficult.; EYES: Irrigate immediately for 15 min. with water, lifting lids occasionally.; SKIN: Flush with water; wash with soap and water. (USCG, 1999) Source: CAMEO Chemicals
  • ERG2024, Guide 129 (Octyl aldehydes): General First Aid:; · Call 911 or emergency medical service.; · Ensure that medical personnel are aware of the material(s) involved, take precautions to protect themselves and avoid contamination.; · Move victim to fresh air if it can be done safely.; · Administer oxygen if breathing is difficult.; · If victim is not breathing:; -- DO NOT perform mouth-to-mouth resuscitation; the victim may have ingested or inhaled the substance.; -- If equipped and pulse detected, wash face and mouth, then give artificial respiration using a proper respiratory medical device (bag-valve mask, pocket mask equipped with a one-way valve or other device).; -- If no pulse detected or no respiratory medical device available, provide continuous compressions. Conduct a pulse check every two minutes or monitor for any signs of spontaneous respirations.; · Remove and isolate contaminated clothing and shoes.; · For minor skin contact, avoid spreading material on unaffected skin.; · In case of contact with substance, remove immediately by flushing skin or eyes with running water for at least 20 minutes.; · For severe burns, immediate medical attention is required.; · Effects of exposure (inhalation, ingestion, Source: Emergency Response Guidebook (ERG)
  • Note: This chemical does not meet GHS hazard criteria for < 0.1% (1 of 1971) of reports. Source: European Chemicals Agency (ECHA)
  • Signal: Warning Source: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H226 (93.3%): Flammable liquid and vapor [Warning Flammable liquids]; H315 (97.4%): Causes skin irritation [Warning Skin corrosion/irritation]; H319 (97.3%): Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H411 (77.1%): Toxic to aquatic life with long lasting effects [Hazardous to the aquatic environment, long-term hazard]; H412 (19.8%): Harmful to aquatic life with long lasting effects [Hazardous to the aquatic environment, long-term hazard] Source: European Chemicals Agency (ECHA)
  • Precautionary Statement Codes: P210, P233, P240, P241, P242, P243, P264, P264+P265, P273, P280, P302+P352, P303+P361+P353, P305+P351+P338, P321, P332+P317, P337+P317, P362+P364, P370+P378, P391, P403+P235, and P501 (click each P-code to see the statement) Source: European Chemicals Agency (ECHA)
  • ECHA C&L Notifications Summary: Aggregated GHS information provided per 1971 reports by companies from 23 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Reported as not meeting GHS hazard criteria per 1 of 1971 reports by companies.; There are 22 notifications provided by 1970 of 1971 reports by companies with hazard statement code(s).; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Source: European Chemicals Agency (ECHA)
  • Signal: Warning Source: NITE-CMC
  • GHS Hazard Statements: H226: Flammable liquid and vapor [Warning Flammable liquids] Source: NITE-CMC
  • Precautionary Statement Codes: P210, P233, P240, P241, P242, P243, P280, P303+P361+P353, P370+P378, P403+P235, and P501 (click each P-code to see the statement) Source: NITE-CMC
  • Signal: Warning Source: Hazardous Substances Data Bank (HSDB)
  • GHS Hazard Statements: H226: Flammable liquid and vapor [Warning Flammable liquids]; H315: Causes skin irritation [Warning Skin corrosion/irritation]; H319: Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H401: Toxic to aquatic life [Hazardous to the aquatic environment, acute hazard]; H411: Toxic to aquatic life with long lasting effects [Hazardous to the aquatic environment, long-term hazard] Source: Hazardous Substances Data Bank (HSDB)
  • Precautionary Statement Codes: P210, P233, P240, P241, P242, P243, P264, P264+P265, P273, P280, P302+P352, P303+P361+P353, P305+P351+P338, P321, P332+P317, P337+P317, P362+P364, P370+P378, P391, P403+P235, and P501 (click each P-code to see the statement) Source: Hazardous Substances Data Bank (HSDB)
  • NFPA Health Rating: 0 - Materials that, under emergency conditions, would offer no hazard beyond that of ordinary combustible materials. Source: Hazardous Substances Data Bank (HSDB)
  • NFPA Fire Rating: 2 - Materials that must be moderately heated or exposed to relatively high ambient temperatures before ignition can occur. Materials would not under normal conditions form hazardous atmospheres with air, but under high ambient temperatures or under moderate heating could release vapor in sufficient quantities to produce hazardous atmospheres with air. Source: Hazardous Substances Data Bank (HSDB)
  • NFPA Instability Rating: 0 - Materials that in themselves are normally stable, even under fire conditions. Source: Hazardous Substances Data Bank (HSDB)
  • Toxicity Summary: IDENTIFICATION AND USE: Octylaldehyde (Octanal) is a colorless liquid. It is employed in the perfume industry for the preparation of synthetic citrus oils and for the synthesis of alpha-hexylcinnamaldehyde. HUMAN STUDIES: In vitro in human A549 cells octanal affects the expression of several chemokines and inflammatory cytokines and increases the levels of interleukin 6 (IL-6) and IL-8 released. Microarray analysis identified 15 miRNAs that were differentially expressed in octanal-exposed A549 human alveolar cells. ANIMAL STUDIES: It induced a significant decrease in the number of live pups in rats but only at a dose which causes maternal toxicity. Octanal was tested in Salmonella typhimurium TA98, TA100, TA1535 and TA1537 with and without metabolic activation. No cytotoxic or genotoxic effects were observed. ECOTOXICITY STUDIES: A membrane damage mechanism involving membrane peroxidation might contribute to the antifungal activity of octanal against P. digitatum spores. Aflatoxin production by the fungus Aspergillus parasiticus was stimulated by octanal. Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Bioconcentration: An estimated BCF of 60 was calculated in fish for octylaldehyde(SRC), using a log Kow of 3.5(1) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests the potential for bioconcentration in aquatic organisms is moderate(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 290(SRC), determined from a log Kow of 3.5(2) and a regression-derived equation(3), indicates that octylaldehyde is expected to have moderate mobility in soil(SRC). Volatilization of octylaldehyde from moist soil surfaces is expected to be an important fate process(SRC) given a Henry's Law constant of 5.14X10-4 atm-cu m/mole(4). Octylaldehyde has a vapor pressure of 0.6 mm Hg(2) and exists as a liquid under environmental conditions; therefore, octylaldehyde may volatilize from dry soil. Utilizing the Zahn-Wellens test, 77% degradation was reached using an activated sludge inoculum after 28 days(5) which indicates this compound is expected to biodegrade under certain environmental conditions in soil(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 290(SRC), determined from a log Kow of 3.5(2) and a regression-derived equation(3), indicates that octylaldehyde may adsorb to suspended solids and sediment(SRC). Volatilization from water surfaces is expected(4) based upon a estimated Henry's Law constant of 5.14X10-4 atm-cu m/mole(5). Using this Henry's Law constant and an estimation method(3), volatilization half-lives for a model river and model lake are 5 hours and 5 days, respectively(SRC). According to a classification scheme(6), an estimated BCF of 60(SRC), from its log Kow(2) and a regression-derived equation(3), suggests the potential for bioconcentration in aquatic organisms is moderate(SRC). Utilizing the Zahn-Wellens test, 77% degradation was reached using an activated sludge inoculum after 28 days(7) which indicates this compound is expected to biodegrade under certain environmental conditions in water(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), octylaldehyde, which has a vapor pressure of 0.6 mm Hg at 20 °C(2), will exist solely in the vapor phase in the ambient atmosphere. Vapor-phase octylaldehyde is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 12 hours(SRC), calculated from its rate constant of 3.2X10-11 cu cm/molecule-sec at 25 °C(SRC) that was derived using a structure estimation method(3). Octylaldehyde does not contain chromophores that absorb at wavelengths >290 nm(4) and, therefore, is not expected to be susceptible to direct photolysis by sunlight(SRC). Source: Hazardous Substances Data Bank (HSDB)

Mis en correspondance par: Existing checksum-valid CAS to unique PubChem CID match. Récupéré le: 2026-08-31. Ouvrir la fiche source

Les classifications scientifiques et les annotations de danger apportent du contexte et ne remplacent pas la décision réglementaire propre au marché indiquée ci-dessus.

Couverture des sources complémentaires et état des correspondances
SourceRésultatVérifié
NIH PubChem PUG-ViewCorrespondance exacte2026-08-31

Une absence de correspondance enregistrée est une preuve utile que la source a été vérifiée ; ce n’est pas l’affirmation que la substance n’existe pas ailleurs.

Récupéré depuis NIH PubChem le 2026-08-31 par correspondance CAS à somme de contrôle valide. Les propriétés chimiques ne remplacent pas la décision réglementaire de cette page.

Comment le CAS 124-13-0 est utilisé sur ce site

Le CAS 124-13-0 est l’identifiant du Chemical Abstracts Service utilisé pour rattacher cette page à une substance précise. Dans le jeu de données actuel, 0 fiche d’annexe de l’UE partage cet identifiant, ce qui vous aide à vérifier si la même substance apparaît dans un seul contexte réglementaire ou dans plusieurs.

Utilisez cette page lorsqu’une spécification fournisseur, une FDS ou un dossier de matière première vous donne le CAS 124-13-0 et que vous devez voir au même endroit toutes les fiches liées des annexes II à VI. Les cartes d’entrées ci-dessus sont le moyen le plus rapide d’accéder aux limites de concentration, aux avertissements, à l’annexe concernée et aux conditions par type de produit.