Aller au contenu principal
CAS 0 fiche

CAS 123-35-3

Le CAS 123-35-3 correspond à 0 fiche d’annexe de l’UE dans les annexes II à VI du règlement (CE) n° 1223/2009.

Fiches pour le CAS 123-35-3

0 au total
Aucune fiche trouvée pour ce numéro CAS.

Identité et propriétés chimiques

Structure chimique 2D PubChem pour le CAS 123-35-3
CAS 123-35-3PubChem CID 31253

Myrcene

Beta-myrcene is a monoterpene that is octa-1,6-diene bearing methylene and methyl substituents at positions 3 and 7 respectively. It has a role as a volatile oil component, a flavouring agent, an anabolic agent, a fragrance, an anti-inflammatory agent and a plant metabolite. — ChEBI

Nom IUPAC
7-methyl-3-methylideneocta-1,6-diene
Formule moléculaire
C10H16
Masse moléculaire
136.23 g/mol
Masse exacte
136.125200510 Da
XLogP3
4,3
Surface polaire topologique
0,0 Ų
Donneurs de liaisons hydrogène
0
Accepteurs de liaisons hydrogène
0
Unités covalentes
1
Stéréocentres définis
0

Également connu sous le nom de

beta-Myrcene7-Methyl-3-methylene-1,6-octadiene1,6-Octadiene, 7-methyl-3-methylene-beta-geraniolene3-Methylene-7-methyl-1,6-octadieneFEMA No. 2762NSC-4062643M39CZS25B
16 autres noms signalés
CHEBI:17221RefChem:6044204-622-52-methyl-6-methylene-1,7-octadiene7-Methyl-3-methyleneocta-1,6-diene.beta.-Myrcene2-Methyl-6-methylene-2,7-octadieneb-Myrcene.beta.-Geranioleneb-Geraniolene7-Methyl-3-methylene-octa-1,6-dieneNSC 406264b-Myrcene (>90%)Myrcene (stabilized with BHT)7-Methyl-3-methyleneoctadiene-(1,6)Methyl 5(Z),8(Z),11(Z),14(Z),17(Z),20(Z)-Tricosahexaenoate
Identifiants de bases de données externes

Preuves issues de bases de données scientifiques complémentaires

NIH PubChem PUG-View
Correspondance exacte d’identifiant31253

Attributed physical-property, hazard, environmental and use annotations.

  • First Aid: INHALATION: Call for medical aid. Remove the victim to fresh air. If not breathing give artificial respiration. If breathing is difficult give oxygen.; SKIN: Wash with soap and copious amounts of water.; EYES: Immediately flush with copious amounts of water. Insure adequate flushing of the eyes by holding the eyelids open with the fingers. (USCG, 1999) Source: CAMEO Chemicals
  • Signal: Danger Source: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H226 (99.8%): Flammable liquid and vapor [Warning Flammable liquids]; H304 (99%): May be fatal if swallowed and enters airways [Danger Aspiration hazard]; H315 (85.6%): Causes skin irritation [Warning Skin corrosion/irritation]; H319 (85.5%): Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H400 (14.6%): Very toxic to aquatic life [Warning Hazardous to the aquatic environment, acute hazard]; H412 (18.7%): Harmful to aquatic life with long lasting effects [Hazardous to the aquatic environment, long-term hazard] Source: European Chemicals Agency (ECHA)
  • Precautionary Statement Codes: P210, P233, P240, P241, P242, P243, P264, P264+P265, P273, P280, P301+P316, P302+P352, P303+P361+P353, P305+P351+P338, P321, P331, P332+P317, P337+P317, P362+P364, P370+P378, P391, P403+P235, P405, and P501 (click each P-code to see the statement) Source: European Chemicals Agency (ECHA)
  • ECHA C&L Notifications Summary: Aggregated GHS information provided per 2180 reports by companies from 35 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Source: European Chemicals Agency (ECHA)
  • Signal: Danger Source: NITE-CMC
  • GHS Hazard Statements: H226: Flammable liquid and vapor [Warning Flammable liquids]; H315: Causes skin irritation [Warning Skin corrosion/irritation]; H319: Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H351: Suspected of causing cancer [Warning Carcinogenicity]; H360: May damage fertility or the unborn child [Danger Reproductive toxicity]; H400: Very toxic to aquatic life [Warning Hazardous to the aquatic environment, acute hazard]; H410: Very toxic to aquatic life with long lasting effects [Warning Hazardous to the aquatic environment, long-term hazard] Source: NITE-CMC
  • Precautionary Statement Codes: P203, P210, P233, P240, P241, P242, P243, P264, P264+P265, P273, P280, P302+P352, P303+P361+P353, P305+P351+P338, P318, P321, P332+P317, P337+P317, P362+P364, P370+P378, P391, P403+P235, P405, and P501 (click each P-code to see the statement) Source: NITE-CMC
  • Signal: Warning Source: NITE-CMC
  • GHS Hazard Statements: H226: Flammable liquid and vapor [Warning Flammable liquids]; H315: Causes skin irritation [Warning Skin corrosion/irritation]; H351: Suspected of causing cancer [Warning Carcinogenicity]; H361: Suspected of damaging fertility or the unborn child [Warning Reproductive toxicity] Source: NITE-CMC
  • Precautionary Statement Codes: P203, P210, P233, P240, P241, P242, P243, P264, P280, P302+P352, P303+P361+P353, P318, P321, P332+P317, P362+P364, P370+P378, P403+P235, P405, and P501 (click each P-code to see the statement) Source: NITE-CMC
  • Environmental Bioconcentration: An estimated BCF of 334 was calculated in fish for myrcene(SRC), using a log Kow of 4.33(1) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests the potential for bioconcentration in aquatic organisms is high(SRC), provided the compound is not metabolized by the organism(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: THE INFLUENCE OF LIGHT & TEMP ON MONOTERPENE EMISSIONS FROM SLASH PINE WERE ASSESSED. QUANT PRESENT IN VAPOR PHASE WERE SUFFICIENT TO MEASURE RELIABLY. Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 1074(SRC), determined from a structure estimation method(2), indicates that myrcene is expected to have low mobility in soil(SRC). Volatilization of myrcene from moist soil surfaces is expected to be an important fate process(SRC) given an estimated Henry's Law constant of 0.0916 atm-cu m/mole(SRC), derived from its vapor pressure, 2.09 mm Hg(3), and water solubility, 4.09 mg/L(4). However, adsorption to soil may attenuate volatilization(SRC). Myrcene is expected to volatilize from dry soil surfaces(SRC) based upon the vapor pressure of 2.09 mm Hg at 25 °C(3). Myrcene, present at 100 mg/L, reached 82-92% of its theoretical BOD in 2 weeks using an activated sludge inoculum at 30 mg/L and the Japanese MITI test(5) which classifies the compound as readily biodegradable. Monoterpene compounds similar in structure to myrcene (limonene, pinene, terpinene, terpinolene) were readily degraded in aerobic batch experiments using forest soil(6). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 1074(SRC), determined from a structure estimation method(2), indicates that myrcene is expected to adsorb to suspended solids and sediment(SRC). Volatilization from water surfaces is expected(3) based upon an estimated Henry's Law constant of 0.0916 atm-cu m/mole(SRC), derived from its vapor pressure, 2.09 mm Hg(4), and water solubility, 4.09 mg/L(5). Using this Henry's Law constant and an estimation method(3), volatilization half-lives for a model river and model lake are 3.4 hours and 4.6 days, respectively(SRC). According to a classification scheme(6), an estimated BCF of 334(SRC), from its log Kow of 4.33(7) and a regression-derived equation(2), suggests the potential for bioconcentration in aquatic organisms is high(SRC), provided the compound is not metabolized by the organism(SRC). Myrcene is not expected to undergo hydrolysis in the environment due to the lack of functional groups that hydrolyze under environmental conditions(3). Myrcene, present at 100 mg/L, reached 82-92% of its theoretical BOD in 2 weeks using an activated sludge inoculum at 30 mg/L and the Japanese MITI test(8) which classifies Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), myrcene, which has a vapor pressure of 2.09 mm Hg at 25 °C(2), is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase myrcene is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals, ozone and nitrate radicals(SRC); the half-life for the reaction with hydroxyl radicals is estimated to be 1.8 hrs(SRC), calculated from its rate constant of 2.15X10-10 cu cm/molecule-sec at 25 °C(3); the half-life for the reaction with ozone is estimated to be 34 minutes(SRC), calculated from its rate constant of 4.90X10-16 cu cm/molecule-sec(4); the half-life for the reaction with nitrate radicals in nighttime air is estimated to be 4 minutes(SRC), calculated from its rate constant of 1.10X10-11 cu cm/molecule-sec(4). Hydroxyl radical and ozone oxidation of myrcene in the ambient atmosphere yields acetone, formaldehyde and formic acid as degradation products(5). Myrcene does not contain chromophores that absorb at wavelengths >290 nm(6), and therefore is not expected to be susceptible to direct photolysis by sunlight(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Sources/Uses: Beta-myrcene: Found in oil of bay, verbena, hops, and other natural sources; Alpha-myrcene: Not found in nature; [Merck Index] Used as a fragrance, flavoring agent, insect repellent, and detergent additive; [HSDB] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Uses: ... Myrcene is the starting material for a range of industrially important products, e.g., geraniol, nerol, linalool, and isophytol. ... Besides its main use as an intermediate for the production of terpene alcohols, myrcene is used in the production of terpene polymers, terpene-phenol resins, and terpene-maleate resins. It can also be used as a solvent or diluting agent for dyes and varnishes. Source: Hazardous Substances Data Bank (HSDB)
  • Uses: Preparation of perfume chemicals and flavoring. Source: Hazardous Substances Data Bank (HSDB)
  • Uses: INSECT REPELLENT Source: Hazardous Substances Data Bank (HSDB)
  • Uses: Detergents Source: Hazardous Substances Data Bank (HSDB)
  • Uses: For more Uses (Complete) data for MYRCENE (6 total), please visit the HSDB record page. Source: Hazardous Substances Data Bank (HSDB)
  • Uses: Perfume chemicals and flavoring. Myrcene is the major constituent of oil of bay and hop which are used in the manufacture of alcoholic beverages. Myrcene is also present in lemon grass (Cymbopogon citratus), a plant widely used in Brazilian folk medicine. Recently, it was shown that myrcene is a very potent analgesic substance and might be an alternative to the already available analgesic drugs (T39, A2447). Source: Toxin and Toxin Target Database (T3DB)

Mis en correspondance par: Existing checksum-valid CAS to unique PubChem CID match. Récupéré le: 2026-08-31. Ouvrir la fiche source

Les classifications scientifiques et les annotations de danger apportent du contexte et ne remplacent pas la décision réglementaire propre au marché indiquée ci-dessus.

Couverture des sources complémentaires et état des correspondances
SourceRésultatVérifié
NIH PubChem PUG-ViewCorrespondance exacte2026-08-31

Une absence de correspondance enregistrée est une preuve utile que la source a été vérifiée ; ce n’est pas l’affirmation que la substance n’existe pas ailleurs.

Récupéré depuis NIH PubChem le 2026-08-31 par correspondance CAS à somme de contrôle valide. Les propriétés chimiques ne remplacent pas la décision réglementaire de cette page.

Comment le CAS 123-35-3 est utilisé sur ce site

Le CAS 123-35-3 est l’identifiant du Chemical Abstracts Service utilisé pour rattacher cette page à une substance précise. Dans le jeu de données actuel, 0 fiche d’annexe de l’UE partage cet identifiant, ce qui vous aide à vérifier si la même substance apparaît dans un seul contexte réglementaire ou dans plusieurs.

Utilisez cette page lorsqu’une spécification fournisseur, une FDS ou un dossier de matière première vous donne le CAS 123-35-3 et que vous devez voir au même endroit toutes les fiches liées des annexes II à VI. Les cartes d’entrées ci-dessus sont le moyen le plus rapide d’accéder aux limites de concentration, aux avertissements, à l’annexe concernée et aux conditions par type de produit.