Aller au contenu principal
CAS 1 fiche

CAS 112-34-5

Le CAS 112-34-5 correspond à 1 fiche d’annexe de l’UE dans les annexes II à VI du règlement (CE) n° 1223/2009.

Fiches pour le CAS 112-34-5

1 au total
Annexe
III
Entrée
187

BUTOXYDIGLYCOL

Diethylene glycol monobutyl ether (DEGBE)

No use in aerosol dispensers (sprays)

EC
Concentration max.

Identité et propriétés chimiques

Structure chimique 2D PubChem pour le CAS 112-34-5
CAS 112-34-5PubChem CID 8177

Diethylene Glycol Monobutyl Ether

Ethanol, 2-(2-butoxyethoxy)- is an ether. — ChEBI

Nom IUPAC
2-(2-butoxyethoxy)ethanol
Formule moléculaire
C8H18O3
Masse moléculaire
162.23 g/mol
Masse exacte
162.125594432 Da
XLogP3
0,6
Surface polaire topologique
38,7 Ų
Donneurs de liaisons hydrogène
1
Accepteurs de liaisons hydrogène
3
Unités covalentes
1
Stéréocentres définis
0

Également connu sous le nom de

Diethylene glycol butyl etherButyl carbitolButoxydiglycolButyl diglycolButyl dioxitolButyl digolGlycol ether DBBUCB
16 autres noms signalés
Dowanol DBButoxyethoxyethanolEthanol, 2-(2-butoxyethoxy)-Jeffersol dbEktasolve DBButoxydiethylene glycolDiethylene glycol mono-n-butyl etherDiglycol monobutyl etherO-Butyl diethylene glycolButoxy diethylene glycolDiethylene glycol n-butyl etherDiethylene gylcol monobutyl etherButyl Ethyl CellosolveMonobutyl diethylene glycol etherEthanol, 2,2'-oxybis-, monobutyl ether9TB90IYC0E
Identifiants de bases de données externes

Preuves issues de bases de données scientifiques complémentaires

NIH PubChem PUG-View
Correspondance exacte d’identifiant8177

Attributed physical-property, hazard, environmental and use annotations.

  • First Aid: EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.; SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.; INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) shou Source: CAMEO Chemicals
  • Signal: Warning Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • GHS Hazard Statements: H319: Causes serious eye irritation [Warning Serious eye damage/eye irritation] Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Precautionary Statement Codes: P264+P265, P280, P305+P351+P338, and P337+P317 (click each P-code to see the statement) Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Note: This chemical does not meet GHS hazard criteria for < 0.1% (2 of 4089) of reports. Source: European Chemicals Agency (ECHA)
  • Signal: Warning Source: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H319 (> 99.9%): Causes serious eye irritation [Warning Serious eye damage/eye irritation] Source: European Chemicals Agency (ECHA)
  • Precautionary Statement Codes: P264+P265, P280, P305+P351+P338, and P337+P317 (click each P-code to see the statement) Source: European Chemicals Agency (ECHA)
  • ECHA C&L Notifications Summary: Aggregated GHS information provided per 4089 reports by companies from 12 notifications to the ECHA C&L Inventory.; Reported as not meeting GHS hazard criteria per 2 of 4089 reports by companies.; There are 11 notifications provided by 4087 of 4089 reports by companies with hazard statement code(s).; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Source: European Chemicals Agency (ECHA)
  • Signal: Danger Source: NITE-CMC
  • GHS Hazard Statements: H227: Combustible liquid [Warning Flammable liquids]; H319: Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H336: May cause drowsiness or dizziness [Warning Specific target organ toxicity, single exposure; Narcotic effects]; H372: Causes damage to organs through prolonged or repeated exposure [Danger Specific target organ toxicity, repeated exposure] Source: NITE-CMC
  • Precautionary Statement Codes: P210, P260, P261, P264, P264+P265, P270, P271, P280, P304+P340, P305+P351+P338, P319, P337+P317, P370+P378, P403, P403+P233, P405, and P501 (click each P-code to see the statement) Source: NITE-CMC
  • Signal: Warning Source: NITE-CMC
  • NFPA Health Rating: 1 - Materials that, under emergency conditions, can cause significant irritation. Source: Hazardous Substances Data Bank (HSDB)
  • NFPA Fire Rating: 2 - Materials that must be moderately heated or exposed to relatively high ambient temperatures before ignition can occur. Materials would not under normal conditions form hazardous atmospheres with air, but under high ambient temperatures or under moderate heating could release vapor in sufficient quantities to produce hazardous atmospheres with air. Source: Hazardous Substances Data Bank (HSDB)
  • NFPA Instability Rating: 1 - Materials that in themselves are normally stable but that can become unstable at elevated temperatures and pressures. Source: Hazardous Substances Data Bank (HSDB)
  • Toxicity Summary: IDENTIFICATION AND USE: Diethylene glycol mono-n-butyl ether (DGBE) is a colorless liquid with a faint butyl odor. It is used as an inert ingredient that is not registered for current use as a pesticide in the U.S., but is used in pesticide products. It is also used as a coalescing agent in latex paints; solvent for stamp pad inks; dye solvent; solvent in high baked enamels; dispersant; diluent for hydraulic brake fluids; and a mutual solvent for soap, oil, and water in household cleaners. HUMAN EXPOSURE AND TOXICITY: The ethers of diethylene glycol are lower in toxicity than the ethers of ethylene glycol, but they have many similar characteristics. Exposure to some ether derivatives of ethylene and diethylene glycols can cause central nervous depression, no hypocalcemic tetany or metabolic acidosis, nausea, vomiting, & sometimes diarrhea, headache, later abdominal and lumbar pain, costovertebral angle tenderness, transient polyuria & then oliguria, progressing to anuria, acute renal failure, and pathological lesions may appear in brain, lung, liver, meninges & heart. ANIMAL STUDIES: Observations in animals suggest a possibility of pulmonary edema, intravascular hemolysis and bone Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Bioconcentration: An estimated BCF of 3 was calculated in fish for diethylene glycol mono-n-butyl ether(SRC), using a log Kow of 0.56(1) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests the potential for bioconcentration in aquatic organisms is low(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 10(SRC), determined from a structure estimation method(2), indicates that diethylene glycol mono-n-butyl ether is expected to have very high mobility in soil(SRC). Volatilization of diethylene glycol mono-n-butyl ether from moist soil surfaces is not expected to be an important fate process(SRC) given a Henry's Law constant of 7.2X10-9 atm-cu m/mole(3). Diethylene glycol mono-n-butyl ether is not expected to volatilize from dry soil surfaces(SRC) based upon a vapor pressure of 0.0219 mm Hg at 25 °C(4). Biodegradation of ethylene glycol mono-n-butyl ether ranges from 2% using 5 day BOD(5) to 100% in 6 days using a modified Zahns-Wellens test(6), suggesting that biodegradation may be an important fate process in aerobic soil under certain conditions(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 10(SRC), determined from a structure estimation method(2), indicates that diethylene glycol mono-n-butyl ether is not expected to adsorb to suspended solids and sediment(SRC). Volatilization from water surfaces is not expected(3) based upon a Henry's Law constant of 7.2X10-9 atm-cu m/mole(4). Diethylene glycol mono-n-butyl ether is not expected to undergo hydrolysis in the environment due to the lack of functional groups that hydrolyze under environmental conditions(3). According to a classification scheme(5), an estimated BCF of 3(SRC), from its log Kow of 0.56(6) and a regression-derived equation(2), suggests the potential for bioconcentration in aquatic organisms is low(SRC). Aqueous aerobic screening tests gave biodegradation rates ranging from 2% in 5 day BOD(7) to 100% in 6 days using a modified Zahns-Wellens test(8), suggesting that biodegradation may be an important environmental fate process in water under certain condtions(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), diethylene glycol mono-n-butyl ether, which has a vapor pressure of 0.0219 mm Hg at 25 °C(2), is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase diethylene glycol mono-n-butyl ether is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 5.2 hours(SRC), calculated from its rate constant of 7.44X10-11 cu cm/molecule-sec at 23 °C(3). Alcohols and ethers do not contain chromophores that absorb at wavelengths >290 nm(4) and, therefore, diethylene glycol mono-n-butyl ether is not expected to be susceptible to direct photolysis by sunlight(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Consumer Uses: Cleaning agent; Hydraulic fluids; Corrosion inhibitor; Thickening agent; Not Known or Reasonably Ascertainable; Viscosity modifiers; Film former; Intermediate; Etching agent; Humectant; Softener and conditioner; Solvent; Lubricating agent; Other Source: EPA Chemical Data Reporting (CDR)
  • Industry Uses: Plating agent; Processing aids not otherwise specified; Monomers; Lubricating agent; Solvent; Defoamer; Surface modifier; Softener and conditioner; Humectant; Laboratory chemicals; Drier; Etching agent; Chelating agent; Intermediate; Processing aids, specific to petroleum production; Film former; Anti-stain agent; Emulsifier; Viscosity modifiers; Waterproofing agent; Corrosion inhibitor; Not Known or Reasonably Ascertainable; Cleaning agent Source: EPA Chemical Data Reporting (CDR)
  • Sources/Uses: Used as a solvent and diluent for polymers, resins, coatings, inks, cleaners, and metalworking fluids; [HSDB] Used as a solvent (nitrocellulose, oils, dyes, gums, soaps, and polymers) and coalescing agent in latex paints; In paints containing 1.5% w/w, painters exposed to 4-5 mg/m3; [ACGIH] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Industrial Processes with risk of exposure: Metal Machining [Category: Heat or Machine]; Semiconductor Manufacturing [Category: Industry]; Painting (Solvents) [Category: Paint]; Plastic Composites Manufacturing [Category: Industry]; Textiles (Printing, Dyeing, or Finishing) [Category: Industry]; Silk-Screen Printing [Category: Other] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Uses: For diethylene glycol monobutyl ether (USEPA/OPP Pesticide Code: 011502) there are 0 labels match. /SRP: Not registered for current use in the U.S., but approved pesticide uses may change periodically and so federal, state and local authorities must be consulted for currently approved uses./ Source: Hazardous Substances Data Bank (HSDB)
  • Uses: Inert ingredient in pesticide products. Diethylene glycol monobutyl ether is found on List 2: potentially toxic other ingredients/high priority for testing inerts. ... List 2 inert ingredients are structurally similar to chemicals known to be toxic; some have data suggesting a concern. Source: Hazardous Substances Data Bank (HSDB)
  • Uses: CHEM INT FOR DIETHYLENE GLYCOL MONOBUTYL ETHER ACETATE; COALESCING AGENT IN LATEX PAINTS; SOLVENT FOR STAMP PAD INKS; DYE SOLVENT; SOLVENT IN HIGH BAKED ENAMELS; DISPERSANT FOR VINYL CHLORIDE RESINS IN ORGANOSOLS; DILUENT FOR HYDRAULIC BRAKE FLUIDS; MUTUAL SOLVENT FOR SOAP, OIL, WATER IN HOUSEHOLD CLEANERS Source: Hazardous Substances Data Bank (HSDB)
  • Uses: In textile industry as wetting-out soln Source: Hazardous Substances Data Bank (HSDB)
  • Uses: For more Uses (Complete) data for DIETHYLENE GLYCOL MONO-N-BUTYL ETHER (10 total), please visit the HSDB record page. Source: Hazardous Substances Data Bank (HSDB)

Mis en correspondance par: Existing checksum-valid CAS to unique PubChem CID match. Récupéré le: 2026-08-31. Ouvrir la fiche source

Les classifications scientifiques et les annotations de danger apportent du contexte et ne remplacent pas la décision réglementaire propre au marché indiquée ci-dessus.

Couverture des sources complémentaires et état des correspondances
SourceRésultatVérifié
NIH PubChem PUG-ViewCorrespondance exacte2026-08-31

Une absence de correspondance enregistrée est une preuve utile que la source a été vérifiée ; ce n’est pas l’affirmation que la substance n’existe pas ailleurs.

Récupéré depuis NIH PubChem le 2026-09-02 par correspondance CAS à somme de contrôle valide. Les propriétés chimiques ne remplacent pas la décision réglementaire de cette page.

Comment le CAS 112-34-5 est utilisé sur ce site

Le CAS 112-34-5 est l’identifiant du Chemical Abstracts Service utilisé pour rattacher cette page à une substance précise. Dans le jeu de données actuel, 1 fiche d’annexe de l’UE partage cet identifiant, ce qui vous aide à vérifier si la même substance apparaît dans un seul contexte réglementaire ou dans plusieurs.

Utilisez cette page lorsqu’une spécification fournisseur, une FDS ou un dossier de matière première vous donne le CAS 112-34-5 et que vous devez voir au même endroit toutes les fiches liées des annexes II à VI. Les cartes d’entrées ci-dessus sont le moyen le plus rapide d’accéder aux limites de concentration, aux avertissements, à l’annexe concernée et aux conditions par type de produit.

Questions fréquentes

Une substance identifiée par le CAS 112-34-5 peut figurer dans plusieurs annexes du règlement de l’UE sur les cosmétiques lorsqu’elle est soumise à des conditions différentes selon les contextes. Par exemple, une substance peut être soumise à restrictions à l’annexe III avec des conditions précises, et le même CAS peut aussi figurer à l’annexe IV comme colorant autorisé, dans une entrée distincte avec ses propres conditions. Chaque entrée doit être examinée individuellement.

Recoupez le numéro CAS avec les fiches de spécification de vos matières premières et vos certificats d’analyse. Lorsqu’un CAS figure à l’annexe II, vérifiez son absence. Lorsqu’il figure à l’annexe III, vérifiez que les limites de concentration et les conditions de type de produit sont respectées dans votre formulation. Toutes les entrées d’annexe partageant ce numéro CAS sont énumérées ci-dessus.

Un numéro CAS est attribué par le Chemical Abstracts Service (États-Unis) et reconnu dans le monde entier. Un numéro CE est un identifiant de la Commission européenne issu d’inventaires tels que l’EINECS, l’ELINCS ou la liste NLP. Les deux identifiants peuvent figurer dans les entrées des annexes cosmétiques de l’UE. Certaines substances ont les deux, d’autres un seul, et certaines entrées plus anciennes peuvent n’en avoir aucun.

Le vérificateur INCI accepte les noms d’ingrédients, les numéros CAS et les numéros CE. Vérifiez directement ce numéro CAS, puis contrôlez le résultat auprès des fiches de spécification des fournisseurs et de toutes les conditions d’annexe associées.

Outils et étapes suivantes

Vérifiez votre formule

Analysez une liste INCI complète, puis utilisez le CAS 112-34-5 pour recouper les documents fournisseurs relatifs aux substances identifiées.

Vérificateur INCI

Parcourir les annexes

Parcourez toutes les annexes du règlement de l’UE sur les cosmétiques par catégorie.

Toutes les annexes

Rechercher par nom

Recherchez les noms INCI, alias ou identifiants associés qui figurent à côté du CAS 112-34-5 dans votre documentation.

Rechercher