Aller au contenu principal
CAS 1 fiche

CAS 108-78-1

Le CAS 108-78-1 correspond à 1 fiche d’annexe de l’UE dans les annexes II à VI du règlement (CE) n° 1223/2009.

Fiches pour le CAS 108-78-1

1 au total

Identité et propriétés chimiques

Structure chimique 2D PubChem pour le CAS 108-78-1
CAS 108-78-1PubChem CID 7955

Melamine

Melamine is a trimer of cyanamide, with a 1,3,5-triazine skeleton. It has a role as a xenobiotic metabolite. It is functionally related to a cyanamide. It is a conjugate base of a melamine(1+). — ChEBI

Nom IUPAC
1,3,5-triazine-2,4,6-triamine
Formule moléculaire
C3H6N6
Masse moléculaire
126.12 g/mol
Masse exacte
126.06539422 Da
XLogP3
-1,4
Surface polaire topologique
117,0 Ų
Donneurs de liaisons hydrogène
3
Accepteurs de liaisons hydrogène
6
Unités covalentes
1
Stéréocentres définis
0

Également connu sous le nom de

CyanuramideCyanurotriamideCyanurotriamineIsomelamineTheoharnCyanuric triamides-TriazinetriamineTeoharn
16 autres noms signalés
TriaminotriazineHicophor PR2,4,6-Triamino-1,3,5-triazineAeroPluragardYukamelamine2,4,6-Triamino-s-triazineCymelVirset 656-4Spinflam ML 94MPluragard C 1332,4,6-TriaminotriazineMark ZS 27ADK Stab ZS 27DG 002 (amine)NCI-C50715
Identifiants de bases de données externes

Preuves issues de bases de données scientifiques complémentaires

NIH PubChem PUG-View
Correspondance exacte d’identifiant7955

Attributed physical-property, hazard, environmental and use annotations.

  • First Aid: EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.; SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.; INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. IMMEDIATELY call a physician and be prepared to transport the victim to a hospital even if no symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Ap Source: CAMEO Chemicals
  • Signal: Warning Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • GHS Hazard Statements: H351: Suspected of causing cancer [Warning Carcinogenicity]; H373: May causes damage to organs through prolonged or repeated exposure [Warning Specific target organ toxicity, repeated exposure] Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Precautionary Statement Codes: P203, P260, P280, P318, P319, P405, and P501 (click each P-code to see the statement) Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Note: This chemical does not meet GHS hazard criteria for 67.5% (624 of 924) of all reports. Source: European Chemicals Agency (ECHA)
  • Signal: Warning Source: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H351 (18.2%): Suspected of causing cancer [Warning Carcinogenicity]; H361 (18.7%): Suspected of damaging fertility or the unborn child [Warning Reproductive toxicity]; H361f (17.1%): Suspected of damaging fertility [Warning Reproductive toxicity]; H373 (18.5%): May causes damage to organs through prolonged or repeated exposure [Warning Specific target organ toxicity, repeated exposure] Source: European Chemicals Agency (ECHA)
  • Precautionary Statement Codes: P203, P260, P280, P318, P319, P405, and P501 (click each P-code to see the statement) Source: European Chemicals Agency (ECHA)
  • ECHA C&L Notifications Summary: Aggregated GHS information provided per 924 reports by companies from 31 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Reported as not meeting GHS hazard criteria per 624 of 924 reports by companies.; There are 28 notifications provided by 300 of 924 reports by companies with hazard statement code(s).; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Source: European Chemicals Agency (ECHA)
  • Signal: Warning Source: NITE-CMC
  • GHS Hazard Statements: H227: Combustible liquid [Warning Flammable liquids]; H315: Causes skin irritation [Warning Skin corrosion/irritation]; H317: May cause an allergic skin reaction [Warning Sensitization, Skin]; H336: May cause drowsiness or dizziness [Warning Specific target organ toxicity, single exposure; Narcotic effects] Source: NITE-CMC
  • Precautionary Statement Codes: P210, P261, P264, P271, P272, P280, P302+P352, P304+P340, P319, P321, P332+P317, P333+P317, P362+P364, P370+P378, P403, P403+P233, P405, and P501 (click each P-code to see the statement) Source: NITE-CMC
  • Health Effects: Studies ranging from skin irritation to carcinogenicity are available. Melamine is not genotoxic but it causes carcinomas of the urinary bladder at high doses. Melamine is not irritating to skin and eye, not sensitising and not teratogenic. (L1777) Source: Toxin and Toxin Target Database (T3DB)
  • Toxicity Summary: IDENTIFICATION: Melamine is a monoclinic prismatic substance that is slightly soluble in water and ethanol. It is insoluble in diethyl ether. Melamine forms synthetic resins with formaldehyde. It is used in the manufacture of melamine resins, laminates, surface coating resins, plastic molding compounds, textile resins, bonding resins, gypsum melamine resin mixtures, orthopedic casts, rubber additives and paper products. HUMAN EXPOSURE: Occupational exposure to melamine may occur during its production and use in manufacture of synthetic resins with formaldehyde. ANIMAL STUDIES: Melamine was tested for its carcinogenicity by oral diet in mice and rats and for initiating activity by skin application in mice. No neoplasm related to treatment was observed after oral administration in mice. Male rats fed diets containing melamine developed transitional cell tumors in the urinary bladder, with one exception; all tumor bearing animals had bladder stones probably containing melamine. The incidence of urinary bladder hyperplasia associated with toxicity in male mice treated with melamine in the diet was observed. Groups of 20 male Fisher 344 rats, six weeks old were fed diets containing mela Source: Hazardous Substances Data Bank (HSDB)
  • Toxicity Summary: Melamine causes carcinomas of the urinary bladder at high doses (in male rats). Formation of bladder stones occurred and these calculi are necessary for the induction of tumours. Carcinomas are induced by continuous irritation of the bladder epithelium by the calculi, so that melamine acts only indirectly as a non-genotoxic carcinogen. (L1777) Source: Toxin and Toxin Target Database (T3DB)
  • Environmental Bioconcentration: An estimated BCF of 3 was calculated in fish for melamine(SRC), using a log Kow of -1.37(1) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests the potential for bioconcentration in aquatic organisms is low(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 5(SRC), determined from a log Kow of -1.37(2) and a regression-derived equation(3), indicates that melamine is expected to have very high mobility in soil(SRC). Volatilization of melamine from moist soil surfaces is not expected to be an important fate process(SRC) given an estimated Henry's Law constant of 1.8X10-14 atm-cu m/mole(SRC), derived from its vapor pressure, 3.59X10-10 mm Hg(4), and water solubility, 3.23 mg/L(5). Melamine is not expected to volatilize from dry soil surfaces(SRC) based upon its vapor pressure(4). No biodegradation using a standard 5-day BOD test(6) suggests that biodegradation may not be an important environmental fate process in soil(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 5(SRC), determined from a log Kow of -1.37(2) and a regression-derived equation(3), indicates that melamine is not expected to adsorb to suspended solids and sediment(SRC). Volatilization from water surfaces is not expected(3) based upon an estimated Henry's Law constant of 1.84X10-14 atm-cu m/mole(SRC), derived from its vapor pressure, 3.59X10-10 mm Hg(4), and water solubility, 3.23X10+3 mg/L(5). According to a classification scheme(6), an estimated BCF of 3(SRC), from its log Kow(2) and a regression-derived equation(7), suggests the potential for bioconcentration in aquatic organisms is(SRC). No biodegradation using a standard 5-day BOD test was observed(8), suggesting that biodegradation may not be an important environmental fate process in water(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), melamine, which has a vapor pressure of 3.59X10-10 mm Hg at 20 °C(2), is expected to exist solely in the particulate phase in the ambient atmosphere. Particulate-phase melamine may be removed from the air by wet or dry deposition(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Consumer Uses: Filler; Not Known or Reasonably Ascertainable; Sealant (barrier); Flame retardant; Surface modifier; Hardener; Pigment; Adhesion/cohesion promoter; Other; Binder Source: EPA Chemical Data Reporting (CDR)
  • Industry Uses: Flame retardant; Sealant (barrier); Stabilizing agent; Filler; Not Known or Reasonably Ascertainable; Hardener; Pigment; Adhesion/cohesion promoter; Intermediate; Other; Processing aids not otherwise specified; Surfactant (surface active agent) Source: EPA Chemical Data Reporting (CDR)
  • Sources/Uses: Used as a co-monomer with formaldehyde to make high pressure laminate resins, molding compounds and surface coating resins, textile and paper treating resins, adhesive resins for gluing lumber, plywood, and flooring; Also used as a flame retardant additive for polypropylene and polyethylene, a leather tanning agent, a rust remover, a metal surface cleaner, an etching agent in the semiconductor industry, and a reagent in numerous fluorination processes; [HSDB] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Industrial Processes with risk of exposure: Metal Degreasing [Category: Clean]; Semiconductor Manufacturing [Category: Industry]; Pulp and Paper Processing [Category: Industry]; Textiles (Fiber & Fabric Manufacturing) [Category: Industry]; Painting (Pigments, Binders, and Biocides) [Category: Paint]; Working with Glues and Adhesives [Category: Other]; Plastic Composites Manufacturing [Category: Industry]; Leather Tanning and Processing [Category: Industry] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Uses: Melamine, melamine cyanurate, other melamine salts and guanidine compounds are currently the most used group of nitrogen-containing flame retardants. Melamine is used as a flame retardant additive for polypropylene and polyethylene. Melamine cyanurate is employed commercially as a flame retardant for polyamides and terephthalates (PET/PBT) and is being developed for use in epoxy and polyurethane resins. Melamine phosphate is also used as a flame retardant for terephthalates (PET/PBT) and is currently being developed for use in epoxy and polyurethane flame retardant formulations. Also in the development stages for use as flame-retardant additives are melamine salts and melamine formaldehyde for their application in thermoset resins. Source: Hazardous Substances Data Bank (HSDB)
  • Uses: Melamine resins, organic syntheses, leather tanning. Source: Hazardous Substances Data Bank (HSDB)
  • Uses: TO MAKE HIGH PRESSURE LAMINATE RESINS, MOLDING COMPOUNDS & SURFACE COATING RESINS, TEXTILE & PAPER TREATING RESINS, ADHESIVE RESINS FOR GLUING LUMBER, PLYWOOD, & FLOORING Source: Hazardous Substances Data Bank (HSDB)
  • Uses: COMONOMER WITH FORMALDEHYDE FOR AMINO RESIN PRODN Source: Hazardous Substances Data Bank (HSDB)
  • Uses: For more Uses (Complete) data for MELAMINE (6 total), please visit the HSDB record page. Source: Hazardous Substances Data Bank (HSDB)
  • Uses: Plastics -> Typical concentration range in plastic materials -> 25% Source: NORMAN Suspect List Exchange
  • Uses: Melamine has many industrial uses, including the production of laminates, glues, adhesives, moulding compounds, coatings and flame retardants. It is also used in some fertilizers and in the production of melamine resins, typically by reaction with formaldehyde. Melamine is a metabolite of the pesticide cyromazine in plants, goats, hens and rats. (L1775) (L1778) Source: Toxin and Toxin Target Database (T3DB)

Mis en correspondance par: Existing checksum-valid CAS to unique PubChem CID match. Récupéré le: 2026-08-31. Ouvrir la fiche source

Les classifications scientifiques et les annotations de danger apportent du contexte et ne remplacent pas la décision réglementaire propre au marché indiquée ci-dessus.

Couverture des sources complémentaires et état des correspondances
SourceRésultatVérifié
NIH PubChem PUG-ViewCorrespondance exacte2026-08-31

Une absence de correspondance enregistrée est une preuve utile que la source a été vérifiée ; ce n’est pas l’affirmation que la substance n’existe pas ailleurs.

Récupéré depuis NIH PubChem le 2026-09-02 par correspondance CAS à somme de contrôle valide. Les propriétés chimiques ne remplacent pas la décision réglementaire de cette page.

Comment le CAS 108-78-1 est utilisé sur ce site

Le CAS 108-78-1 est l’identifiant du Chemical Abstracts Service utilisé pour rattacher cette page à une substance précise. Dans le jeu de données actuel, 1 fiche d’annexe de l’UE partage cet identifiant, ce qui vous aide à vérifier si la même substance apparaît dans un seul contexte réglementaire ou dans plusieurs.

Utilisez cette page lorsqu’une spécification fournisseur, une FDS ou un dossier de matière première vous donne le CAS 108-78-1 et que vous devez voir au même endroit toutes les fiches liées des annexes II à VI. Les cartes d’entrées ci-dessus sont le moyen le plus rapide d’accéder aux limites de concentration, aux avertissements, à l’annexe concernée et aux conditions par type de produit.

Questions fréquentes

Une substance identifiée par le CAS 108-78-1 peut figurer dans plusieurs annexes du règlement de l’UE sur les cosmétiques lorsqu’elle est soumise à des conditions différentes selon les contextes. Par exemple, une substance peut être soumise à restrictions à l’annexe III avec des conditions précises, et le même CAS peut aussi figurer à l’annexe IV comme colorant autorisé, dans une entrée distincte avec ses propres conditions. Chaque entrée doit être examinée individuellement.

Recoupez le numéro CAS avec les fiches de spécification de vos matières premières et vos certificats d’analyse. Lorsqu’un CAS figure à l’annexe II, vérifiez son absence. Lorsqu’il figure à l’annexe III, vérifiez que les limites de concentration et les conditions de type de produit sont respectées dans votre formulation. Toutes les entrées d’annexe partageant ce numéro CAS sont énumérées ci-dessus.

Un numéro CAS est attribué par le Chemical Abstracts Service (États-Unis) et reconnu dans le monde entier. Un numéro CE est un identifiant de la Commission européenne issu d’inventaires tels que l’EINECS, l’ELINCS ou la liste NLP. Les deux identifiants peuvent figurer dans les entrées des annexes cosmétiques de l’UE. Certaines substances ont les deux, d’autres un seul, et certaines entrées plus anciennes peuvent n’en avoir aucun.

Le vérificateur INCI accepte les noms d’ingrédients, les numéros CAS et les numéros CE. Vérifiez directement ce numéro CAS, puis contrôlez le résultat auprès des fiches de spécification des fournisseurs et de toutes les conditions d’annexe associées.

Outils et étapes suivantes

Vérifiez votre formule

Analysez une liste INCI complète, puis utilisez le CAS 108-78-1 pour recouper les documents fournisseurs relatifs aux substances identifiées.

Vérificateur INCI

Parcourir les annexes

Parcourez toutes les annexes du règlement de l’UE sur les cosmétiques par catégorie.

Toutes les annexes

Rechercher par nom

Recherchez les noms INCI, alias ou identifiants associés qui figurent à côté du CAS 108-78-1 dans votre documentation.

Rechercher