Aller au contenu principal
CAS 1 fiche

CAS 108-62-3

Le CAS 108-62-3 correspond à 1 fiche d’annexe de l’UE dans les annexes II à VI du règlement (CE) n° 1223/2009.

Fiches pour le CAS 108-62-3

1 au total

Identité et propriétés chimiques

Structure chimique 2D PubChem pour le CAS 108-62-3
CAS 108-62-3PubChem CID 61021

Metaldehyde

Metaldehyde is a white-colored crystalline solid. It is insoluble in water. It is highly flammable and when ignited will give off irritating fumes. It may be toxic by ingestion and is very irritating to skin and eyes. It is used to make other chemicals. — CAMEO Chemicals

Nom IUPAC
2,4,6,8-tetramethyl-1,3,5,7-tetraoxocane
Formule moléculaire
C8H16O4
Masse moléculaire
176.21 g/mol
Masse exacte
176.10485899 Da
XLogP3
1,1
Surface polaire topologique
36,9 Ų
Donneurs de liaisons hydrogène
0
Accepteurs de liaisons hydrogène
4
Unités covalentes
1
Stéréocentres définis
0

Également connu sous le nom de

MetacetaldehydeSlug-ToxCekumetaAcetaldehyde, tetramerAriotoxHalizanMetason1,3,5,7-Tetroxocane, 2,4,6,8-tetramethyl-
16 autres noms signalés
MetaldehydCorry's Slug DeathMetaldeideAcetaldehyde Tetramer2,4,6,8-Tetramethyl-1,3,5,7-tetraoxacyclooctane2,4,6,8-Tetramethyl-1,3,5,7-tetroxocaneSlugfestr-2,c-4,c-6,c-8-Tetramethyl-1,3,5,7-tetroxocane4CI033VJYGCHEBI:81931AntimilaceSchneckokornLimovetNamekilLimaxSlugit
Identifiants de bases de données externes

Preuves issues de bases de données scientifiques complémentaires

NIH PubChem PUG-View
Correspondance exacte d’identifiant61021

Attributed physical-property, hazard, environmental and use annotations.

  • Physical Description: Metaldehyde is a white-colored crystalline solid. It is insoluble in water. It is highly flammable and when ignited will give off irritating fumes. It may be toxic by ingestion and is very irritating to skin and eyes. It is used to make other chemicals. Source: CAMEO Chemicals
  • Physical Description: Solid; [IUCLID] Formulated as granules, pellets, mini-pellets, meal, paste, and liquid; [Reference #1] Colorless or white solid; [Reference #2] White odorless powder; [Alfa Aesar MSDS] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • First Aid: Excerpt from ERG Guide 133 [Flammable Solids]:; Refer to the "General First Aid" section. Specific First Aid: Removal of solidified molten material from skin requires medical assistance. (ERG, 2024) Source: CAMEO Chemicals
  • ERG2024, Guide 133 (Metaldehyde): General First Aid:; · Call 911 or emergency medical service.; · Ensure that medical personnel are aware of the material(s) involved, take precautions to protect themselves and avoid contamination.; · Move victim to fresh air if it can be done safely.; · Administer oxygen if breathing is difficult.; · If victim is not breathing:; -- DO NOT perform mouth-to-mouth resuscitation; the victim may have ingested or inhaled the substance.; -- If equipped and pulse detected, wash face and mouth, then give artificial respiration using a proper respiratory medical device (bag-valve mask, pocket mask equipped with a one-way valve or other device).; -- If no pulse detected or no respiratory medical device available, provide continuous compressions. Conduct a pulse check every two minutes or monitor for any signs of spontaneous respirations.; · Remove and isolate contaminated clothing and shoes.; · For minor skin contact, avoid spreading material on unaffected skin.; · In case of contact with substance, remove immediately by flushing skin or eyes with running water for at least 20 minutes.; · For severe burns, immediate medical attention is required.; · Effects of exposure (inhalation, ingestion, Source: Emergency Response Guidebook (ERG)
  • Signal: Danger Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • GHS Hazard Statements: H228: Flammable solid [Danger Flammable solids]; H301: Toxic if swallowed [Danger Acute toxicity, oral]; H361f: Suspected of damaging fertility [Warning Reproductive toxicity]; H412: Harmful to aquatic life with long lasting effects [Hazardous to the aquatic environment, long-term hazard] Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Precautionary Statement Codes: P203, P210, P240, P241, P264, P270, P273, P280, P301+P316, P318, P321, P330, P370+P378, P405, and P501 (click each P-code to see the statement) Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Signal: Danger Source: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H228 (100%): Flammable solid [Danger Flammable solids]; H301 (77.2%): Toxic if swallowed [Danger Acute toxicity, oral]; H312 (17.2%): Harmful in contact with skin [Warning Acute toxicity, dermal]; H361 (11.9%): Suspected of damaging fertility or the unborn child [Warning Reproductive toxicity]; H361f (44%): Suspected of damaging fertility [Warning Reproductive toxicity]; H412 (68.2%): Harmful to aquatic life with long lasting effects [Hazardous to the aquatic environment, long-term hazard] Source: European Chemicals Agency (ECHA)
  • Precautionary Statement Codes: P203, P210, P240, P241, P264, P270, P273, P280, P301+P316, P302+P352, P317, P318, P321, P330, P362+P364, P370+P378, P405, and P501 (click each P-code to see the statement) Source: European Chemicals Agency (ECHA)
  • ECHA C&L Notifications Summary: Aggregated GHS information provided per 302 reports by companies from 13 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Source: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: Not Classified Source: NITE-CMC
  • Signal: Danger Source: NITE-CMC
  • GHS Hazard Statements: H228: Flammable solid [Danger Flammable solids]; H301: Toxic if swallowed [Danger Acute toxicity, oral]; H320: Causes eye irritation [Warning Serious eye damage/eye irritation]; H370: Causes damage to organs [Danger Specific target organ toxicity, single exposure]; H373: May causes damage to organs through prolonged or repeated exposure [Warning Specific target organ toxicity, repeated exposure] Source: NITE-CMC
  • Precautionary Statement Codes: P210, P240, P241, P260, P264, P264+P265, P270, P280, P301+P316, P305+P351+P338, P308+P316, P319, P321, P330, P337+P317, P370+P378, P405, and P501 (click each P-code to see the statement) Source: NITE-CMC
  • Signal: Danger Source: Hazardous Chemical Information System (HCIS), Safe Work Australia
  • Health Effects: Metaldehyde intoxicatin leads to central nervous system depression, and liver and kidney injury. Death from respiratory failure can occur within a few hours of exposure. (L1787) Source: Toxin and Toxin Target Database (T3DB)
  • NFPA Health Rating: 3 - Materials that, under emergency conditions, can cause serious or permanent injury. Source: Hazardous Substances Data Bank (HSDB)
  • NFPA Fire Rating: 3 - Liquids and solids that can be ignited under almost all ambient temperature conditions. Materials produce hazardous atmospheres with air under almost all ambient temperatures or, though unaffected by ambient temperatures, are readily ignited under almost all conditions. Source: Hazardous Substances Data Bank (HSDB)
  • NFPA Instability Rating: 1 - Materials that in themselves are normally stable but that can become unstable at elevated temperatures and pressures. Source: Hazardous Substances Data Bank (HSDB)
  • Toxicity Summary: The toxicologically active substance in metaldehyde intoxication is mainly the degradation product acetaldehyde; other toxic products are probably also formed. Acetaldehyde acts as a releasing factor for 5-hydroxytryptamine (5-HT) and noradrenaline (NA). It also competitively inhibits biogenic amine oxidation which, in turn, decreases 5-hydroxyindoleacetic acid (5-HIAA), a metabolite of 5-HT by competitively inhibiting 5-HT-oxidation. Acetaldehyde also increases monoamine oxidase activity and decreases central serotonin levels. (L1782) Source: Toxin and Toxin Target Database (T3DB)
  • Environmental Bioconcentration: An estimated BCF of 3.2 was calculated for metaldehyde(SRC), using a log Kow of 0.12(1) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests the potential for bioconcentration in aquatic organisms is low(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: TERRESTRIAL FATE: Based on a classification scheme(1), a measured Koc value of 240(2) indicates that metaldehyde is expected to have moderate mobility in soil(SRC). Volatilization of metaldehyde from moist soil surfaces is expected to be an important fate process(SRC) given an estimated Henry's Law constant of 5.2X10-5 atm-cu m/mole(SRC), derived from its vapor pressure, 5.0X10-2 mm Hg(2), and water solubility, 2.22X10+2 mg/L(2). Metaldehyde is not expected to volatilize from dry soil surfaces(SRC) based upon its vapor pressure(2). The results of a laboratory volatility study suggest that volatilization losses from soil surfaces will be minor(3). In a field study, 6% metaldehyde pellets were broadcast at the rate of 4 kg product/ha in a rice paddy ecosystem(4). Paddy soil samples collected 3 to 14 days after application had metaldehyde residue concentrations ranging from 0.053 to 0.127 mg/kg, reaching a peak at 0.127 mg/kg 14 days after application(4). Metaldehyde residue was below the minimum detection limit of 0.016 mg/kg 22 days after application(4). A reported half-life of approximately 2 months for metaldehyde in soil(3) suggests that biodegradation is not an important environ Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: AQUATIC FATE: Based on a classification scheme(1), a measured Koc value of 240(2) indicates that metaldehyde is not expected to adsorb to suspended solids and sediment(SRC). Volatilization from water surfaces is expected(3) based upon an estimated Henry's Law constant of 5.2X10-5 atm-cu m/mole(SRC), derived from its vapor pressure, 5.0X10-2 mm Hg(2), and water solubility, 2.22X10+2 mg/L(2). Using this Henry's Law constant and an estimation method(3), volatilization half-lives for a model river and model lake are 26 hours and 12 days, respectively(SRC). In a field study, 6% metaldehyde pellets were broadcast at the rate of 4 kg product/ha in a rice paddy ecosystem(4). Paddy water samples collected 1 to 3 days after application had metaldehyde residue concentrations of 1.58 to 1.47 mg/L(4). Residues could be detected only up to 9 days after application, with its degradation pattern following pseudo first-order kinetics showing a half-life of 0.27 days(4). According to a classification scheme(5), an estimated BCF of 3.2(SRC), from its log Kow(2) and a regression-derived equation(6), suggests the potential for bioconcentration in aquatic organisms is low. Utilizing the Japanese MITI te Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), metaldehyde, which has a vapor pressure of 5.0X10-2 mm Hg at 25 °C(2), is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase metaldehyde is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 13 hours(SRC), calculated from its rate constant of 2.9X10-11 cu cm/molecule-sec at 25 °C(SRC) that was derived using a structure estimation method(3). Metaldehyde does not contain chromophores that absorb at wavelengths >290 nm(4) and therefore is not expected to be susceptible to direct photolysis by sunlight(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Sources/Uses: Used for control of snails in seed crops, turf, ornamentals, berries, citrus, vegetables, and other crops; [Reference #1] Used for synthesis in the chemical industry, as odor agent, and as pesticide; [IUCLID] Used as molluscicide, solid fuel for small heaters (alcohol replacement), and fire starter; [Reference #2] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Industrial Processes with risk of exposure: Farming (Pesticides) [Category: Industry] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Uses: For metaldehyde (USEPA/OPP Pesticide Code: 053001) ACTIVE products with label matches. /SRP: Registered for use in the U.S. but approved pesticide uses may change periodically and so federal, state and local authorities must be consulted for currently approved uses./ Source: Hazardous Substances Data Bank (HSDB)
  • Uses: Metaldehyde is a molluscicide used to control snails and slugs on a wide variety of sites, including turf, ornamentals, berries, citrus, and vegetables. Source: Hazardous Substances Data Bank (HSDB)
  • Uses: In compressed form as a fuel instead of alcohol; molluscicide. /Polymer/ Source: Hazardous Substances Data Bank (HSDB)
  • Uses: Metaldehyde is used as a pesticide against slugs, snails, and other gastropods, it is also used in tablets as a solid fuel for small heaters, and as fire-starter. (L1782) Source: Toxin and Toxin Target Database (T3DB)

Mis en correspondance par: Existing checksum-valid CAS to unique PubChem CID match. Récupéré le: 2026-08-31. Ouvrir la fiche source

Les classifications scientifiques et les annotations de danger apportent du contexte et ne remplacent pas la décision réglementaire propre au marché indiquée ci-dessus.

Couverture des sources complémentaires et état des correspondances
SourceRésultatVérifié
NIH PubChem PUG-ViewCorrespondance exacte2026-08-31

Une absence de correspondance enregistrée est une preuve utile que la source a été vérifiée ; ce n’est pas l’affirmation que la substance n’existe pas ailleurs.

Récupéré depuis NIH PubChem le 2026-09-02 par correspondance CAS à somme de contrôle valide. Les propriétés chimiques ne remplacent pas la décision réglementaire de cette page.

Comment le CAS 108-62-3 est utilisé sur ce site

Le CAS 108-62-3 est l’identifiant du Chemical Abstracts Service utilisé pour rattacher cette page à une substance précise. Dans le jeu de données actuel, 1 fiche d’annexe de l’UE partage cet identifiant, ce qui vous aide à vérifier si la même substance apparaît dans un seul contexte réglementaire ou dans plusieurs.

Utilisez cette page lorsqu’une spécification fournisseur, une FDS ou un dossier de matière première vous donne le CAS 108-62-3 et que vous devez voir au même endroit toutes les fiches liées des annexes II à VI. Les cartes d’entrées ci-dessus sont le moyen le plus rapide d’accéder aux limites de concentration, aux avertissements, à l’annexe concernée et aux conditions par type de produit.

Questions fréquentes

Une substance identifiée par le CAS 108-62-3 peut figurer dans plusieurs annexes du règlement de l’UE sur les cosmétiques lorsqu’elle est soumise à des conditions différentes selon les contextes. Par exemple, une substance peut être soumise à restrictions à l’annexe III avec des conditions précises, et le même CAS peut aussi figurer à l’annexe IV comme colorant autorisé, dans une entrée distincte avec ses propres conditions. Chaque entrée doit être examinée individuellement.

Recoupez le numéro CAS avec les fiches de spécification de vos matières premières et vos certificats d’analyse. Lorsqu’un CAS figure à l’annexe II, vérifiez son absence. Lorsqu’il figure à l’annexe III, vérifiez que les limites de concentration et les conditions de type de produit sont respectées dans votre formulation. Toutes les entrées d’annexe partageant ce numéro CAS sont énumérées ci-dessus.

Un numéro CAS est attribué par le Chemical Abstracts Service (États-Unis) et reconnu dans le monde entier. Un numéro CE est un identifiant de la Commission européenne issu d’inventaires tels que l’EINECS, l’ELINCS ou la liste NLP. Les deux identifiants peuvent figurer dans les entrées des annexes cosmétiques de l’UE. Certaines substances ont les deux, d’autres un seul, et certaines entrées plus anciennes peuvent n’en avoir aucun.

Le vérificateur INCI accepte les noms d’ingrédients, les numéros CAS et les numéros CE. Vérifiez directement ce numéro CAS, puis contrôlez le résultat auprès des fiches de spécification des fournisseurs et de toutes les conditions d’annexe associées.

Outils et étapes suivantes

Vérifiez votre formule

Analysez une liste INCI complète, puis utilisez le CAS 108-62-3 pour recouper les documents fournisseurs relatifs aux substances identifiées.

Vérificateur INCI

Parcourir les annexes

Parcourez toutes les annexes du règlement de l’UE sur les cosmétiques par catégorie.

Toutes les annexes

Rechercher par nom

Recherchez les noms INCI, alias ou identifiants associés qui figurent à côté du CAS 108-62-3 dans votre documentation.

Rechercher