Aller au contenu principal
CAS 1 fiche

CAS 107-49-3

Le CAS 107-49-3 correspond à 1 fiche d’annexe de l’UE dans les annexes II à VI du règlement (CE) n° 1223/2009.

Fiches pour le CAS 107-49-3

1 au total

Identité et propriétés chimiques

Structure chimique 2D PubChem pour le CAS 107-49-3
CAS 107-49-3PubChem CID 7873

Tetraethyl Pyrophosphate

TEPP is an organic diphosphate. — ChEBI

Nom IUPAC
diethoxyphosphoryl diethyl phosphate
Formule moléculaire
C8H20O7P2
Masse moléculaire
290.19 g/mol
Masse exacte
290.06842697 Da
XLogP3
0,4
Surface polaire topologique
80,3 Ų
Donneurs de liaisons hydrogène
0
Accepteurs de liaisons hydrogène
7
Unités covalentes
1
Stéréocentres définis
0

Également connu sous le nom de

TEPPTetraethyl diphosphateVapotoneBladanTetronMortopalTetrastigmineHepthexamite
16 autres noms signalés
FosvexGrisolKillaxLirohexNifostNifosKilmite 40HexamiteKillexLethalaire G-52Tetron-100Nifos TDiphosphoric acid, tetraethyl esterEthyl pyrophosphate, tetra-Rcra waste number P111Ethyl pyrophosphate (Et4P2O7)
Identifiants de bases de données externes

Preuves issues de bases de données scientifiques complémentaires

EMBL-EBI ChEBI
Correspondance exacte d’identifiantCHEBI:82149

TEPP

Formule
C8H20O7P2
Masse moyenne
290.189 g/mol
Masse monoisotopique
290.06843 Da
Charge formelle
0
  • organic diphosphate — is a (CHEBI:62889)
  • organic diphosphate — is a (CHEBI:62889)
Noms supplémentaires validés
ethyl pyrophosphateEthyl pyrophosphateNSC-14707Tetraethyl pyrophosphate
Références croisées de cette source
  • CAS: 107-49-3 — KEGG COMPOUND
  • MANUAL_X_REF: 1272 — PPDB
  • MANUAL_X_REF: C19017 — KEGG COMPOUND

Mis en correspondance par: Exact CAS cross-reference in the ChEBI compound record. Récupéré le: 2026-08-31. Ouvrir la fiche source

NIH PubChem PUG-View
Correspondance exacte d’identifiant7873

Attributed physical-property, hazard, environmental and use annotations.

  • First Aid: Warning: Effects may be delayed up to 12 hours. Caution is advised.; Note: TEPP is a cholinesterase inhibitor.; Signs and Symptoms of TEPP Exposure: Acute exposure to TEPP may produce the following signs and symptoms: sweating, pinpoint pupils, blurred vision, headache, dizziness, profound weakness, muscle spasms, seizures, and coma. Mental confusion and psychosis may occur. Excessive salivation, nausea, vomiting, anorexia, diarrhea, and abdominal pain may also occur. The heart rate may decrease following oral exposure or increase following dermal exposure. Chest pain may be noted. Hypotension (low blood pressure) may be observed, although hypertension (high blood pressure) is not uncommon. Respiratory symptoms include dyspnea (shortness of breath), pulmonary edema, respiratory depression, and respiratory paralysis.; Emergency Life-Support Procedures: Acute exposure to TEPP may require decontamination and life support for the victims. Emergency personnel should wear protective clothing appropriate to the type and degree of contamination. Air purifying or supplied-air respiratory equipment should also be worn, as necessary. Rescue vehicles should carry supplies such as plastic sheet Source: CAMEO Chemicals
  • First Aid: (General first aid procedures); Eye: Irrigate immediately - If this chemical contacts the eyes, immediately wash (irrigate) the eyes with large amounts of water, occasionally lifting the lower and upper lids. Get medical attention immediately.; Skin: Water flush immediately - If this chemical contacts the skin, immediately flush the contaminated skin with water. If this chemical penetrates the clothing, immediately remove the clothing and flush the skin with water. Get medical attention promptly.; Breathing: Respiratory support; Swallow: Medical attention immediately - If this chemical has been swallowed, get medical attention immediately. Source: The National Institute for Occupational Safety and Health (NIOSH)
  • Signal: Danger Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • GHS Hazard Statements: H300: Fatal if swallowed [Danger Acute toxicity, oral]; H310: Fatal in contact with skin [Danger Acute toxicity, dermal]; H400: Very toxic to aquatic life [Warning Hazardous to the aquatic environment, acute hazard] Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Precautionary Statement Codes: P262, P264, P270, P273, P280, P301+P316, P302+P352, P316, P321, P330, P361+P364, P391, P405, and P501 (click each P-code to see the statement) Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Signal: Danger Source: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H300 (100%): Fatal if swallowed [Danger Acute toxicity, oral]; H310 (100%): Fatal in contact with skin [Danger Acute toxicity, dermal]; H400 (100%): Very toxic to aquatic life [Warning Hazardous to the aquatic environment, acute hazard] Source: European Chemicals Agency (ECHA)
  • Precautionary Statement Codes: P262, P264, P270, P273, P280, P301+P316, P302+P352, P316, P321, P330, P361+P364, P391, P405, and P501 (click each P-code to see the statement) Source: European Chemicals Agency (ECHA)
  • ECHA C&L Notifications Summary: Aggregated GHS information provided per 42 reports by companies from 2 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Source: European Chemicals Agency (ECHA)
  • Signal: Danger Source: NITE-CMC
  • GHS Hazard Statements: H300: Fatal if swallowed [Danger Acute toxicity, oral]; H310: Fatal in contact with skin [Danger Acute toxicity, dermal]; H315: Causes skin irritation [Warning Skin corrosion/irritation]; H319: Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H330: Fatal if inhaled [Danger Acute toxicity, inhalation]; H370: Causes damage to organs [Danger Specific target organ toxicity, single exposure]; H372: Causes damage to organs through prolonged or repeated exposure [Danger Specific target organ toxicity, repeated exposure] Source: NITE-CMC
  • Precautionary Statement Codes: P260, P262, P264, P264+P265, P270, P271, P280, P284, P301+P316, P302+P352, P304+P340, P305+P351+P338, P308+P316, P316, P319, P320, P321, P330, P332+P317, P337+P317, P361+P364, P362+P364, P403+P233, P405, and P501 (click each P-code to see the statement) Source: NITE-CMC
  • GHS Hazard Statements: H300: Fatal if swallowed [Danger Acute toxicity, oral]; H310: Fatal in contact with skin [Danger Acute toxicity, dermal]; H315: Causes skin irritation [Warning Skin corrosion/irritation]; H319: Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H330: Fatal if inhaled [Danger Acute toxicity, inhalation]; H370: Causes damage to organs [Danger Specific target organ toxicity, single exposure]; H373: May causes damage to organs through prolonged or repeated exposure [Warning Specific target organ toxicity, repeated exposure] Source: NITE-CMC
  • Signal: Danger Source: Hazardous Chemical Information System (HCIS), Safe Work Australia
  • Environmental Bioconcentration: An estimated BCF of 3.2 was calculated for tetraethyl pyrophosphate(SRC), using an estimated log Kow of 0.45(1) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests the potential for bioconcentration in aquatic organisms is low(SRC), provided the compound is not altered physically or chemically once released into the environment. Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 2.2(SRC), determined from a water solubility of 1.00X10+6 mg/L(2) and a regression-derived equation(3), indicates that tetraethyl pyrophosphate is expected to have very high mobility in soil(SRC). Volatilization of tetraethyl pyrophosphate from moist soil surfaces is not expected to be an important fate process(SRC) given an estimated Henry's Law constant of 2.2X10-10 atm-cu m/mole(SRC) derived from its vapor pressure, 2.60X10-4 mm Hg at 25 °C(2), and water solubility(2). Tetraethyl pyrophosphate is not expected to volatilize from dry soil surfaces(SRC) based upon its vapor pressure(2). Biodegradation data for this substance were not located in the literature. Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 2.2(SRC), determined from a water solubility of 1.00X10+6 mg/L(2) and a regression-derived equation(3), indicates that tetraethyl pyrophosphate is not expected to adsorb to suspended solids and sediment(SRC). Volatilization from water surfaces is not expected(3) based upon an estimated Henry's Law constant of 2.2X10-10 atm-cu m/mole(SRC), derived from its vapor pressure, 2.60X10-4 mm Hg at 25 °C(2), and water solubility(2). Using this Henry's Law constant and an estimation method(3). According to a classification scheme(4), an estimated BCF of 3.2(SRC), from an estimated log Kow(5) and a regression-derived equation(6), suggests the potential for bioconcentration in aquatic organisms is low(SRC). Biodegradation data for this substance were not located in the literature. Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), tetraethyl pyrophosphate, which has a vapor pressure of 2.60X10-4 mm Hg at 25 °C(2), is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase tetraethyl pyrophosphate is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 5.0 hours(SRC), calculated from its rate constant of 7.7X10-11 cu cm/molecule-sec at 25 °C(SRC) that was derived using a structure estimation method(3). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: Aquatic or Terrestrial Fate: ... Rapidly hydrolyzed in the presence of moisture. Source: Hazardous Substances Data Bank (HSDB)

Mis en correspondance par: Existing checksum-valid CAS to unique PubChem CID match. Récupéré le: 2026-08-31. Ouvrir la fiche source

Les classifications scientifiques et les annotations de danger apportent du contexte et ne remplacent pas la décision réglementaire propre au marché indiquée ci-dessus.

Couverture des sources complémentaires et état des correspondances
SourceRésultatVérifié
EMBL-EBI ChEBICorrespondance exacte2026-08-31
NIH PubChem PUG-ViewCorrespondance exacte2026-08-31

Une absence de correspondance enregistrée est une preuve utile que la source a été vérifiée ; ce n’est pas l’affirmation que la substance n’existe pas ailleurs.

Récupéré depuis NIH PubChem le 2026-08-31 par correspondance CAS à somme de contrôle valide. Les propriétés chimiques ne remplacent pas la décision réglementaire de cette page.

Comment le CAS 107-49-3 est utilisé sur ce site

Le CAS 107-49-3 est l’identifiant du Chemical Abstracts Service utilisé pour rattacher cette page à une substance précise. Dans le jeu de données actuel, 1 fiche d’annexe de l’UE partage cet identifiant, ce qui vous aide à vérifier si la même substance apparaît dans un seul contexte réglementaire ou dans plusieurs.

Utilisez cette page lorsqu’une spécification fournisseur, une FDS ou un dossier de matière première vous donne le CAS 107-49-3 et que vous devez voir au même endroit toutes les fiches liées des annexes II à VI. Les cartes d’entrées ci-dessus sont le moyen le plus rapide d’accéder aux limites de concentration, aux avertissements, à l’annexe concernée et aux conditions par type de produit.

Questions fréquentes

Une substance identifiée par le CAS 107-49-3 peut figurer dans plusieurs annexes du règlement de l’UE sur les cosmétiques lorsqu’elle est soumise à des conditions différentes selon les contextes. Par exemple, une substance peut être soumise à restrictions à l’annexe III avec des conditions précises, et le même CAS peut aussi figurer à l’annexe IV comme colorant autorisé, dans une entrée distincte avec ses propres conditions. Chaque entrée doit être examinée individuellement.

Recoupez le numéro CAS avec les fiches de spécification de vos matières premières et vos certificats d’analyse. Lorsqu’un CAS figure à l’annexe II, vérifiez son absence. Lorsqu’il figure à l’annexe III, vérifiez que les limites de concentration et les conditions de type de produit sont respectées dans votre formulation. Toutes les entrées d’annexe partageant ce numéro CAS sont énumérées ci-dessus.

Un numéro CAS est attribué par le Chemical Abstracts Service (États-Unis) et reconnu dans le monde entier. Un numéro CE est un identifiant de la Commission européenne issu d’inventaires tels que l’EINECS, l’ELINCS ou la liste NLP. Les deux identifiants peuvent figurer dans les entrées des annexes cosmétiques de l’UE. Certaines substances ont les deux, d’autres un seul, et certaines entrées plus anciennes peuvent n’en avoir aucun.

Le vérificateur INCI accepte les noms d’ingrédients, les numéros CAS et les numéros CE. Vérifiez directement ce numéro CAS, puis contrôlez le résultat auprès des fiches de spécification des fournisseurs et de toutes les conditions d’annexe associées.

Outils et étapes suivantes

Vérifiez votre formule

Analysez une liste INCI complète, puis utilisez le CAS 107-49-3 pour recouper les documents fournisseurs relatifs aux substances identifiées.

Vérificateur INCI

Parcourir les annexes

Parcourez toutes les annexes du règlement de l’UE sur les cosmétiques par catégorie.

Toutes les annexes

Rechercher par nom

Recherchez les noms INCI, alias ou identifiants associés qui figurent à côté du CAS 107-49-3 dans votre documentation.

Rechercher