DIETHYLENE GLYCOL
2,2'-oxydiethanol Diethylene glycol (DEG)
DIETHYLENE GLYCOL figure à l’annexe III et ne peut être utilisé que dans les conditions indiquées dans cette fiche. Concentration maximale dans cette fiche : 0.1%.
Détails de la fiche
Concentration maximale
0.1%
Type de produit
Nom du glossaire INCI
DIETHYLENE GLYCOL
Nom chimique
2,2'-oxydiethanol Diethylene glycol (DEG)
Nom chimique / IUPAC
2,2'-oxydiethanol
Informations réglementaires
Avis du SCCS
Ingrédients identifiés
- BIS-ISOBUTYL PEG-14/AMODIMETHICONE COPOLYMER
- DIETHYLENE GLYCOL/DMAP ACRYLAMIDE/PEG-180/HDI COPOLYMER
- LAURYL DIMETHICONE PEG-15 CROSSPOLYMER
- PEG-10/LAURYL DIMETHICONE CROSSPOLYMER
- PEG-90/POLYEPSILON CAPROLACTONE
- PEG-15/LAURYL DIMETHICONE CROSSPOLYMER
- METHOXY PEG-100/POLYEPSILON CAPROLACTONE
- METHOXY PEG-114/POLYEPSILON CAPROLACTONE
- BIS-ISOBUTYL PEG-15/AMODIMETHICONE COPOLYMER
- DIETHYLENE GLYCOL
- DIETHYLENE GLYCOL/DIMER DILINOLEIC ACID COPOLYMER
- LAURYL DIMETHICONE PEG-10 PHOSPHATE
- EPSILON CAPROLACTONE PEG/PPG-23/34 COPOLYMER
- PEG/PPG-18/6 DIMETHICONE
- BIS-ISOBUTYL PEG/PPG-10/7/DIMETHICONE COPOLYMER
- BIS-ISOBUTYL PEG-24/PPG-7/DIMETHICONE COPOLYMER
- BIS-ISOBUTYL PEG/PPG-20/35/AMODIMETHICONE COPOLYMER
Données clés
Identité et propriétés chimiques

- Nom IUPAC
- 2-(2-hydroxyethoxy)ethanol
- Formule moléculaire
- C4H10O3
- Masse moléculaire
- 106.12 g/mol
- Masse exacte
- 106.062994177 Da
- XLogP3
- -1,3
- Surface polaire topologique
- 49,7 Ų
- Donneurs de liaisons hydrogène
- 2
- Accepteurs de liaisons hydrogène
- 3
- Unités covalentes
- 1
- Stéréocentres définis
- 0
Également connu sous le nom de
16 autres noms signalés
Identifiants de bases de données externes
- ChEBI:CHEBI:46807
- ChEMBL:CHEMBL1235226
- EPA DTXSID:DTXSID8020462
- PubMed:36087010
- PubMed:35385781
- PubMed:25622337
- PubMed:23827505
- PubMed:22954530
- PubMed:22606114
- PubMed:22247651
- PubMed:22016655
- PubMed:21935381
- PubMed:21856646
- PubMed:21804082
- PubMed:21730503
Preuves issues de bases de données scientifiques complémentaires
NIH PubChem PUG-View
Attributed physical-property, hazard, environmental and use annotations.
- Autoignition Temperature: 444 °F (USCG, 1999) Source: CAMEO Chemicals
- Autoignition Temperature: 444 °F Source: Hazardous Substances Data Bank (HSDB)
- Autoignition Temperature: 229 °C Source: ILO-WHO International Chemical Safety Cards (ICSCs)
- Boiling Point: 473 °F at 760 mmHg (NTP, 1992) Source: CAMEO Chemicals
- Boiling Point: 245.8 °C Source: Hazardous Substances Data Bank (HSDB)
- Boiling Point: 245 °C Source: ILO-WHO International Chemical Safety Cards (ICSCs)
- Color/Form: Colorless syrupy liquid Source: Hazardous Substances Data Bank (HSDB)
- Density: 1.118 at 68 °F (USCG, 1999) - Denser than water; will sink Source: CAMEO Chemicals
- Density: 1.1197 g/cu cm at 15 °C Source: Hazardous Substances Data Bank (HSDB)
- Density: Relative density (water = 1): 1.12 Source: ILO-WHO International Chemical Safety Cards (ICSCs)
- Density: 1.12 @ 15°C Source: PAC Chemical Database, U.S. Department of Energy
- Flash Point: 290 °F (NTP, 1992) Source: CAMEO Chemicals
- Flash Point: 124 °C Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Flash Point: 280 to 290 °F (open cup) /from table/ Source: Hazardous Substances Data Bank (HSDB)
- Flash Point: 124 °C c.c. Source: ILO-WHO International Chemical Safety Cards (ICSCs)
- LogP: -1.47 Source: ILO-WHO International Chemical Safety Cards (ICSCs)
- Melting Point: 14 °F (NTP, 1992) Source: CAMEO Chemicals
- Melting Point: -10.4 °C Source: Hazardous Substances Data Bank (HSDB)
- Melting Point: -6.5 °C Source: ILO-WHO International Chemical Safety Cards (ICSCs)
- Melting Point: -10.4 °C Source: PAC Chemical Database, U.S. Department of Energy
- Odor: Practically odorless Source: Hazardous Substances Data Bank (HSDB)
- Physical Description: Diethylene glycol appears as a colorless liquid. Denser than water. Contact may slightly irritate skin, eyes and mucous membranes. May be slightly toxic by ingestion. Used to make other chemicals. Source: CAMEO Chemicals
- Physical Description: CBI; Liquid; Wet Solid; Liquid Source: EPA Chemical Data Reporting (CDR)
- Physical Description: Very hygroscopic, colorless liquid; [Hawley] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Physical Description: ODOURLESS COLOURLESS VISCOUS HYGROSCOPIC LIQUID. Source: ILO-WHO International Chemical Safety Cards (ICSCs)
- Refractive Index: Index of refraction = 1.4472 at 20 °C/D Source: Hazardous Substances Data Bank (HSDB)
- Solubility: greater than or equal to 100 mg/mL at 68 °F (NTP, 1992) Source: CAMEO Chemicals
- Solubility: Immiscible with toluene, petroleum, linseed or castor oil Source: Hazardous Substances Data Bank (HSDB)
- Solubility: Soluble in chloroform Source: Hazardous Substances Data Bank (HSDB)
- Solubility: Soluble in ethanol, ethyl ether Source: Hazardous Substances Data Bank (HSDB)
- Solubility: Miscible with alcohol, ether, acetone, ethylene glycol; practically insoluble in benzene, carbon tetrachloride Source: Hazardous Substances Data Bank (HSDB)
- Solubility: Solubility in water: miscible Source: ILO-WHO International Chemical Safety Cards (ICSCs)
- Vapor Pressure: less than 0.01 mmHg at 68 °F ; 0.01 mmHg at 86 °F (NTP, 1992) Source: CAMEO Chemicals
- Vapor Pressure: 0.0057 [mmHg] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Vapor Pressure: VP: 1 mm Hg at 91.8 °C Source: Hazardous Substances Data Bank (HSDB)
- Vapor Pressure: 5.7X10-3 mm Hg at 25 °C Source: Hazardous Substances Data Bank (HSDB)
- Vapor Pressure: Vapor pressure, Pa at 20 °C: 2.7 Source: ILO-WHO International Chemical Safety Cards (ICSCs)
- Vapor Pressure: 0.0057 [mm Hg] @25 °C Source: PAC Chemical Database, U.S. Department of Energy
- Viscosity: 0.30 cP at 25 °C Source: Hazardous Substances Data Bank (HSDB)
- Exposure Routes: The substance can be absorbed into the body by ingestion. Source: ILO-WHO International Chemical Safety Cards (ICSCs)
- First Aid: EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.; SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.; INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) shou Source: CAMEO Chemicals
- Signal: Warning Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
- GHS Hazard Statements: H302: Harmful if swallowed [Warning Acute toxicity, oral] Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
- Precautionary Statement Codes: P264, P270, P301+P317, P330, and P501 (click each P-code to see the statement) Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
- Signal: Warning Source: European Chemicals Agency (ECHA)
- GHS Hazard Statements: H302 (100%): Harmful if swallowed [Warning Acute toxicity, oral] Source: European Chemicals Agency (ECHA)
- Precautionary Statement Codes: P264, P270, P301+P317, P330, and P501 (click each P-code to see the statement) Source: European Chemicals Agency (ECHA)
- ECHA C&L Notifications Summary: Aggregated GHS information provided per 5754 reports by companies from 38 notifications to the ECHA C&L Inventory.; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Source: European Chemicals Agency (ECHA)
- Signal: Danger Source: NITE-CMC
- GHS Hazard Statements: H361: Suspected of damaging fertility or the unborn child [Warning Reproductive toxicity]; H372: Causes damage to organs through prolonged or repeated exposure [Danger Specific target organ toxicity, repeated exposure] Source: NITE-CMC
- Precautionary Statement Codes: P203, P260, P264, P270, P280, P318, P319, P405, and P501 (click each P-code to see the statement) Source: NITE-CMC
- Signal: Warning Source: Hazardous Chemical Information System (HCIS), Safe Work Australia
- GHS Hazard Statements: H302: Harmful if swallowed [Warning Acute toxicity, oral] Source: Hazardous Chemical Information System (HCIS), Safe Work Australia
- NFPA Health Rating: 1 - Materials that, under emergency conditions, can cause significant irritation. Source: Hazardous Substances Data Bank (HSDB)
- NFPA Fire Rating: 1 - Materials that must be preheated before ignition can occur. Materials require considerable preheating, under all ambient temperature conditions, before ignition and combustion can occur. Source: Hazardous Substances Data Bank (HSDB)
- NFPA Instability Rating: 0 - Materials that in themselves are normally stable, even under fire conditions. Source: Hazardous Substances Data Bank (HSDB)
- Environmental Bioconcentration: An estimated BCF of 3 was calculated in fish for diethylene glycol(SRC), using an estimated log Kow of -1.5(1) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests the potential for bioconcentration in aquatic organisms is low(SRC). Source: Hazardous Substances Data Bank (HSDB)
- Environmental Fate: TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 1(SRC), determined from a structure estimation method(2), indicates that diethylene glycol is expected to have very high mobility in soil(SRC). Volatilization of diethylene glycol from moist soil surfaces is not expected to be an important fate process(SRC) given an estimated Henry's Law constant of 2.0X10-9 atm-cu m/mole(SRC), using a fragment constant estimation method(3). Diethylene glycol is not expected to volatilize from dry soil surfaces(SRC) based upon a vapor pressure of 5.7X10-3 mm Hg at 25 °C(4). Diethylene glycol was readily biodegraded in a sandy loam(5) suggesting that biodegradation is an important environmental fate process in soil(SRC). Source: Hazardous Substances Data Bank (HSDB)
- Environmental Fate: AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 1(SRC), determined from a structure estimation method(2), indicates that diethylene glycol is not expected to adsorb to suspended solids and sediment(SRC). Volatilization from water surfaces is not expected(3) based upon an estimated Henry's Law constant of 2.0X10-9 atm-cu m/mole(SRC), developed using a fragment constant estimation method(4). According to a classification scheme(6), an estimated BCF of 3(SRC), from an estimated log Kow of -1.5(7) and a regression-derived equation(8), suggests the potential for bioconcentration in aquatic organisms is low(SRC). Diethylene glycol was biodegraded partially from river water within 7 days at 20 °C, but under winter conditions of river flow and temperature (less than 8 °C) degradation was minimal(9). Source: Hazardous Substances Data Bank (HSDB)
- Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), diethylene glycol, which has a vapor pressure of 5.7X10-3 mm Hg at 25 °C(2), is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase diethylene glycol is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 17 hrs(SRC), calculated from its rate constant of 3.0X10-11 cu cm/molecule-sec at 25 °C(3). Diethylene glycol degraded 5.5% by light at a wavelength greater than 290 nm over a period of 17 hours(4) and therefore may be susceptible to direct photolysis by sunlight(SRC). Source: Hazardous Substances Data Bank (HSDB)
- Consumer Uses: Hydraulic fluids; Plasticizer; Stabilizing agent; Catalyst; Not Known or Reasonably Ascertainable; Corrosion inhibitor; Soil amendments (fertilizers); Adhesion/cohesion promoter; Intermediate; Solvent; Anti-adhesive/cohesive; Anti-freeze agent; Other; Freeze-thaw additive; Lubricating agent; Processing aids not otherwise specified; Monomers; Fuel agents; Heat transferring agent Source: EPA Chemical Data Reporting (CDR)
- Industry Uses: Fuel agents; Heat transferring agent; Processing aids not otherwise specified; Surfactant (surface active agent); Monomers; Wetting agent (non-aqueous); Other; CBI; Lubricating agent; Freeze-thaw additive; Solvent; Anti-freeze agent; Anti-adhesive/cohesive; Adhesion/cohesion promoter; Intermediate; Emulsifier; Catalyst; Corrosion inhibitor; Filler; Not Known or Reasonably Ascertainable; Hydraulic fluids; Dehydrating agent (desiccant) Source: EPA Chemical Data Reporting (CDR)
- Sources/Uses: Used as a humectant (tobacco, casein, synthetic sponges, composition corks, glues, gelatin, and paper products), a dehydrating agent (plasticizers, surfactants, and natural gas), a lubricating and finishing agent (wool, worsted, cotton, rayon, and silk), a solvent for vat dyes, an intermediate (triethylene glycol and diethylene glycol dinitrate), a petroleum extraction solvent, and a monomer (unsaturated polyester resins and polyols for polyurethane); Also used in lacquers, cosmetics, antifreeze solutions for sprinkler systems; water seals for gas tanks, brake fluids, lubricants, mold release agents, and inks; [HSDB] Used mainly to produce unsaturated polyester resins, polyols, and polyurethanes; [Reference #1] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Industrial Processes with risk of exposure: Petroleum Production and Refining [Category: Industry]; Pulp and Paper Processing [Category: Industry]; Painting (Solvents) [Category: Paint]; Working with Glues and Adhesives [Category: Other]; Textiles (Printing, Dyeing, or Finishing) [Category: Industry] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Uses: Production of polyurethane and unsaturated polyester resins, triethylene glycol; textile softener; petroleum solvent extraction; dehydration of natural gas, plasticizers, and surfactants; solvent for nitrocellulose and many dyes and oils; humectant for tobacco, casein, synthetic sponges, paper products; cork compositions, bookbinding adhesives, dyeing assistant, cosmetics, antifreeze solutions. Source: Hazardous Substances Data Bank (HSDB)
- Uses: In antifreeze soln for sprinkler systems; for water seals for gas tank; lubricating and finishing agent for wool, worsted, cotton, rayon and silk; solvent for vat dyes; in composition corks, glues, gelatin, casein, and pastes to prevent drying out. Source: Hazardous Substances Data Bank (HSDB)
- Uses: Diethylene glycol is used in gas conditioning and in the permanent antifreeze formulations; as a constituent of brake fluids, lubricants, mold release agents, and inks; as a softening agent for textiles; as a plasticizer for cork, adhesives, paper, packaging materials, and coatings; as an intermediate in the prodn of explosive diethylene glycol dinitrate; and as an intermediate in the production of certain resins, morpholine, and diethylene glycol esters and ethers. Source: Hazardous Substances Data Bank (HSDB)
- Uses: In lacquer industry and in cosmetics Source: Hazardous Substances Data Bank (HSDB)
- Uses: For more Uses (Complete) data for DIETHYLENE GLYCOL (9 total), please visit the HSDB record page. Source: Hazardous Substances Data Bank (HSDB)
Mis en correspondance par: Existing checksum-valid CAS to unique PubChem CID match. Récupéré le: 2026-08-31. Ouvrir la fiche source
Les classifications scientifiques et les annotations de danger apportent du contexte et ne remplacent pas la décision réglementaire propre au marché indiquée ci-dessus.
Couverture des sources complémentaires et état des correspondances
| Source | Résultat | Vérifié |
|---|---|---|
| NIH PubChem PUG-View | Correspondance exacte | 2026-08-31 |
Une absence de correspondance enregistrée est une preuve utile que la source a été vérifiée ; ce n’est pas l’affirmation que la substance n’existe pas ailleurs.
Récupéré depuis NIH PubChem le 2026-08-31 par correspondance CAS à somme de contrôle valide. Les propriétés chimiques ne remplacent pas la décision réglementaire de cette page.
Liens d’inventaire pour DIETHYLENE GLYCOL
BIS-ISOBUTYL PEG-24/PPG-7/DIMETHICONE COPOLYMER
BIS-ISOBUTYL PEG/PPG-10/7/DIMETHICONE COPOLYMER
Fiches associées pour DIETHYLENE GLYCOL
Les correspondances directes sont limitées pour cette fiche ; des entrées voisines de l’annexe III sont donc également affichées.
Diethylene glycol (DEG); 2,2'-oxydiethanol for traces level, see Annex III
CI 19140 / ACID YELLOW 23
1-(5,6,7,8-Tetrahydro-3,5,5,6,8,8,-hexamethyl-2-naphthyl)ethan-1-one (AHTN)
ACID BLUE 9
Liquidambar styraciflua oil and extract (styrax)
Liquidambar orientalis oil and extract (styrax)
Ce que signifie l’annexe III pour DIETHYLENE GLYCOL
DIETHYLENE GLYCOL est une substance soumise à restrictions en vertu de l’annexe III du règlement (CE) n° 1223/2009 relatif aux produits cosmétiques. Son utilisation dans les cosmétiques n’est autorisée que dans les conditions précises énoncées dans l’entrée ci-dessus, y compris les limites de concentration, les restrictions de type de produit et les mentions d’avertissement requises.
Lorsque cette substance entre dans une formulation, toutes les conditions — concentration maximale, champ d’application du produit et mentions d’avertissement — doivent être respectées simultanément. Le respect d’une condition ne dispense pas des autres.
Cette fiche est liée à 17 ingrédients de l’inventaire CosIng pour le recoupement des noms et des identifiants. La page fait également apparaître 12 fiches d’annexe associées présentant des identifiants, une logique d’annexe ou des schémas de dénomination qui se recoupent.
Liste de contrôle de conformité
- Veillez à ce que la concentration de la formulation ne dépasse pas : 0.1%
- Confirmez la compatibilité avec le type de produit : As traces in ingredients
- Consignez les conditions d’emploi dans le dossier d’information produit (DIP).
Questions fréquentes
Note de source pour la fiche DIETHYLENE GLYCOL de l’annexe III
Cette page résume une fiche de l’annexe III pour DIETHYLENE GLYCOL à partir de documents publics de la Commission européenne sur les cosmétiques et ajoute les correspondances d’inventaire ou d’identifiants associées lorsqu’elles sont disponibles.
Utilisez cette page de fiche pour examiner les conditions de l’annexe III pour DIETHYLENE GLYCOL, mais confirmez toute décision réglementaire finale auprès du libellé officiel en vigueur de l’annexe et des fichiers sources.
Outils et étapes suivantes
Vérifiez votre formule
Collez une liste INCI complète pour détecter DIETHYLENE GLYCOL et d’autres fiches d’annexe de l’UE signalées en une seule passe.
Vérificateur INCIComparer des entrées
Comparez DIETHYLENE GLYCOL côte à côte avec une autre fiche d’annexe pour examiner les différences de restrictions, de concentrations et d’annexe.
ComparerParcourir l’annexe
Consultez toutes les fiches de l’annexe III et comparez les conditions réglementaires entre les substances de cette annexe.
Ouvrir l’annexe III