DIETHYLENE GLYCOL
2,2'-oxydiethanol Diethylene glycol (DEG)
DIETHYLENE GLYCOL ist in Anhang III aufgeführt und darf nur unter den in diesem Eintrag genannten Bedingungen verwendet werden. Höchstkonzentration in diesem Eintrag: 0.1%.
Eintragsdetails
Höchstkonzentration
0.1%
Produktart
INCI-Glossarname
DIETHYLENE GLYCOL
Chemische Bezeichnung
2,2'-oxydiethanol Diethylene glycol (DEG)
Chemische / IUPAC-Bezeichnung
2,2'-oxydiethanol
Regulatorische Informationen
SCCS-Gutachten
Identifizierte Inhaltsstoffe
- BIS-ISOBUTYL PEG-14/AMODIMETHICONE COPOLYMER
- DIETHYLENE GLYCOL/DMAP ACRYLAMIDE/PEG-180/HDI COPOLYMER
- LAURYL DIMETHICONE PEG-15 CROSSPOLYMER
- PEG-10/LAURYL DIMETHICONE CROSSPOLYMER
- PEG-90/POLYEPSILON CAPROLACTONE
- PEG-15/LAURYL DIMETHICONE CROSSPOLYMER
- METHOXY PEG-100/POLYEPSILON CAPROLACTONE
- METHOXY PEG-114/POLYEPSILON CAPROLACTONE
- BIS-ISOBUTYL PEG-15/AMODIMETHICONE COPOLYMER
- DIETHYLENE GLYCOL
- DIETHYLENE GLYCOL/DIMER DILINOLEIC ACID COPOLYMER
- LAURYL DIMETHICONE PEG-10 PHOSPHATE
- EPSILON CAPROLACTONE PEG/PPG-23/34 COPOLYMER
- PEG/PPG-18/6 DIMETHICONE
- BIS-ISOBUTYL PEG/PPG-10/7/DIMETHICONE COPOLYMER
- BIS-ISOBUTYL PEG-24/PPG-7/DIMETHICONE COPOLYMER
- BIS-ISOBUTYL PEG/PPG-20/35/AMODIMETHICONE COPOLYMER
Kerndaten
Chemische Identität und Eigenschaften

- IUPAC-Name
- 2-(2-hydroxyethoxy)ethanol
- Summenformel
- C4H10O3
- Molekulargewicht
- 106.12 g/mol
- Exakte Masse
- 106.062994177 Da
- XLogP3
- -1,3
- Topologische polare Oberfläche
- 49,7 Ų
- Wasserstoffbrücken-Donoren
- 2
- Wasserstoffbrücken-Akzeptoren
- 3
- Kovalente Einheiten
- 1
- Definierte Stereozentren
- 0
Auch bekannt als
16 weitere gemeldete Namen
Kennungen in externen Datenbanken
- ChEBI:CHEBI:46807
- ChEMBL:CHEMBL1235226
- EPA DTXSID:DTXSID8020462
- PubMed:36087010
- PubMed:35385781
- PubMed:25622337
- PubMed:23827505
- PubMed:22954530
- PubMed:22606114
- PubMed:22247651
- PubMed:22016655
- PubMed:21935381
- PubMed:21856646
- PubMed:21804082
- PubMed:21730503
Belege aus weiteren wissenschaftlichen Datenbanken
NIH PubChem PUG-View
Attributed physical-property, hazard, environmental and use annotations.
- Autoignition Temperature: 444 °F (USCG, 1999) Quelle: CAMEO Chemicals
- Autoignition Temperature: 444 °F Quelle: Hazardous Substances Data Bank (HSDB)
- Autoignition Temperature: 229 °C Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
- Boiling Point: 473 °F at 760 mmHg (NTP, 1992) Quelle: CAMEO Chemicals
- Boiling Point: 245.8 °C Quelle: Hazardous Substances Data Bank (HSDB)
- Boiling Point: 245 °C Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
- Color/Form: Colorless syrupy liquid Quelle: Hazardous Substances Data Bank (HSDB)
- Density: 1.118 at 68 °F (USCG, 1999) - Denser than water; will sink Quelle: CAMEO Chemicals
- Density: 1.1197 g/cu cm at 15 °C Quelle: Hazardous Substances Data Bank (HSDB)
- Density: Relative density (water = 1): 1.12 Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
- Density: 1.12 @ 15°C Quelle: PAC Chemical Database, U.S. Department of Energy
- Flash Point: 290 °F (NTP, 1992) Quelle: CAMEO Chemicals
- Flash Point: 124 °C Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Flash Point: 280 to 290 °F (open cup) /from table/ Quelle: Hazardous Substances Data Bank (HSDB)
- Flash Point: 124 °C c.c. Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
- LogP: -1.47 Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
- Melting Point: 14 °F (NTP, 1992) Quelle: CAMEO Chemicals
- Melting Point: -10.4 °C Quelle: Hazardous Substances Data Bank (HSDB)
- Melting Point: -6.5 °C Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
- Melting Point: -10.4 °C Quelle: PAC Chemical Database, U.S. Department of Energy
- Odor: Practically odorless Quelle: Hazardous Substances Data Bank (HSDB)
- Physical Description: Diethylene glycol appears as a colorless liquid. Denser than water. Contact may slightly irritate skin, eyes and mucous membranes. May be slightly toxic by ingestion. Used to make other chemicals. Quelle: CAMEO Chemicals
- Physical Description: CBI; Liquid; Wet Solid; Liquid Quelle: EPA Chemical Data Reporting (CDR)
- Physical Description: Very hygroscopic, colorless liquid; [Hawley] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Physical Description: ODOURLESS COLOURLESS VISCOUS HYGROSCOPIC LIQUID. Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
- Refractive Index: Index of refraction = 1.4472 at 20 °C/D Quelle: Hazardous Substances Data Bank (HSDB)
- Solubility: greater than or equal to 100 mg/mL at 68 °F (NTP, 1992) Quelle: CAMEO Chemicals
- Solubility: Immiscible with toluene, petroleum, linseed or castor oil Quelle: Hazardous Substances Data Bank (HSDB)
- Solubility: Soluble in chloroform Quelle: Hazardous Substances Data Bank (HSDB)
- Solubility: Soluble in ethanol, ethyl ether Quelle: Hazardous Substances Data Bank (HSDB)
- Solubility: Miscible with alcohol, ether, acetone, ethylene glycol; practically insoluble in benzene, carbon tetrachloride Quelle: Hazardous Substances Data Bank (HSDB)
- Solubility: Solubility in water: miscible Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
- Vapor Pressure: less than 0.01 mmHg at 68 °F ; 0.01 mmHg at 86 °F (NTP, 1992) Quelle: CAMEO Chemicals
- Vapor Pressure: 0.0057 [mmHg] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Vapor Pressure: VP: 1 mm Hg at 91.8 °C Quelle: Hazardous Substances Data Bank (HSDB)
- Vapor Pressure: 5.7X10-3 mm Hg at 25 °C Quelle: Hazardous Substances Data Bank (HSDB)
- Vapor Pressure: Vapor pressure, Pa at 20 °C: 2.7 Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
- Vapor Pressure: 0.0057 [mm Hg] @25 °C Quelle: PAC Chemical Database, U.S. Department of Energy
- Viscosity: 0.30 cP at 25 °C Quelle: Hazardous Substances Data Bank (HSDB)
- Exposure Routes: The substance can be absorbed into the body by ingestion. Quelle: ILO-WHO International Chemical Safety Cards (ICSCs)
- First Aid: EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.; SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.; INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) shou Quelle: CAMEO Chemicals
- Signal: Warning Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
- GHS Hazard Statements: H302: Harmful if swallowed [Warning Acute toxicity, oral] Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
- Precautionary Statement Codes: P264, P270, P301+P317, P330, and P501 (click each P-code to see the statement) Quelle: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
- Signal: Warning Quelle: European Chemicals Agency (ECHA)
- GHS Hazard Statements: H302 (100%): Harmful if swallowed [Warning Acute toxicity, oral] Quelle: European Chemicals Agency (ECHA)
- Precautionary Statement Codes: P264, P270, P301+P317, P330, and P501 (click each P-code to see the statement) Quelle: European Chemicals Agency (ECHA)
- ECHA C&L Notifications Summary: Aggregated GHS information provided per 5754 reports by companies from 38 notifications to the ECHA C&L Inventory.; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Quelle: European Chemicals Agency (ECHA)
- Signal: Danger Quelle: NITE-CMC
- GHS Hazard Statements: H361: Suspected of damaging fertility or the unborn child [Warning Reproductive toxicity]; H372: Causes damage to organs through prolonged or repeated exposure [Danger Specific target organ toxicity, repeated exposure] Quelle: NITE-CMC
- Precautionary Statement Codes: P203, P260, P264, P270, P280, P318, P319, P405, and P501 (click each P-code to see the statement) Quelle: NITE-CMC
- Signal: Warning Quelle: Hazardous Chemical Information System (HCIS), Safe Work Australia
- GHS Hazard Statements: H302: Harmful if swallowed [Warning Acute toxicity, oral] Quelle: Hazardous Chemical Information System (HCIS), Safe Work Australia
- NFPA Health Rating: 1 - Materials that, under emergency conditions, can cause significant irritation. Quelle: Hazardous Substances Data Bank (HSDB)
- NFPA Fire Rating: 1 - Materials that must be preheated before ignition can occur. Materials require considerable preheating, under all ambient temperature conditions, before ignition and combustion can occur. Quelle: Hazardous Substances Data Bank (HSDB)
- NFPA Instability Rating: 0 - Materials that in themselves are normally stable, even under fire conditions. Quelle: Hazardous Substances Data Bank (HSDB)
- Environmental Bioconcentration: An estimated BCF of 3 was calculated in fish for diethylene glycol(SRC), using an estimated log Kow of -1.5(1) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests the potential for bioconcentration in aquatic organisms is low(SRC). Quelle: Hazardous Substances Data Bank (HSDB)
- Environmental Fate: TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 1(SRC), determined from a structure estimation method(2), indicates that diethylene glycol is expected to have very high mobility in soil(SRC). Volatilization of diethylene glycol from moist soil surfaces is not expected to be an important fate process(SRC) given an estimated Henry's Law constant of 2.0X10-9 atm-cu m/mole(SRC), using a fragment constant estimation method(3). Diethylene glycol is not expected to volatilize from dry soil surfaces(SRC) based upon a vapor pressure of 5.7X10-3 mm Hg at 25 °C(4). Diethylene glycol was readily biodegraded in a sandy loam(5) suggesting that biodegradation is an important environmental fate process in soil(SRC). Quelle: Hazardous Substances Data Bank (HSDB)
- Environmental Fate: AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 1(SRC), determined from a structure estimation method(2), indicates that diethylene glycol is not expected to adsorb to suspended solids and sediment(SRC). Volatilization from water surfaces is not expected(3) based upon an estimated Henry's Law constant of 2.0X10-9 atm-cu m/mole(SRC), developed using a fragment constant estimation method(4). According to a classification scheme(6), an estimated BCF of 3(SRC), from an estimated log Kow of -1.5(7) and a regression-derived equation(8), suggests the potential for bioconcentration in aquatic organisms is low(SRC). Diethylene glycol was biodegraded partially from river water within 7 days at 20 °C, but under winter conditions of river flow and temperature (less than 8 °C) degradation was minimal(9). Quelle: Hazardous Substances Data Bank (HSDB)
- Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), diethylene glycol, which has a vapor pressure of 5.7X10-3 mm Hg at 25 °C(2), is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase diethylene glycol is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 17 hrs(SRC), calculated from its rate constant of 3.0X10-11 cu cm/molecule-sec at 25 °C(3). Diethylene glycol degraded 5.5% by light at a wavelength greater than 290 nm over a period of 17 hours(4) and therefore may be susceptible to direct photolysis by sunlight(SRC). Quelle: Hazardous Substances Data Bank (HSDB)
- Consumer Uses: Hydraulic fluids; Plasticizer; Stabilizing agent; Catalyst; Not Known or Reasonably Ascertainable; Corrosion inhibitor; Soil amendments (fertilizers); Adhesion/cohesion promoter; Intermediate; Solvent; Anti-adhesive/cohesive; Anti-freeze agent; Other; Freeze-thaw additive; Lubricating agent; Processing aids not otherwise specified; Monomers; Fuel agents; Heat transferring agent Quelle: EPA Chemical Data Reporting (CDR)
- Industry Uses: Fuel agents; Heat transferring agent; Processing aids not otherwise specified; Surfactant (surface active agent); Monomers; Wetting agent (non-aqueous); Other; CBI; Lubricating agent; Freeze-thaw additive; Solvent; Anti-freeze agent; Anti-adhesive/cohesive; Adhesion/cohesion promoter; Intermediate; Emulsifier; Catalyst; Corrosion inhibitor; Filler; Not Known or Reasonably Ascertainable; Hydraulic fluids; Dehydrating agent (desiccant) Quelle: EPA Chemical Data Reporting (CDR)
- Sources/Uses: Used as a humectant (tobacco, casein, synthetic sponges, composition corks, glues, gelatin, and paper products), a dehydrating agent (plasticizers, surfactants, and natural gas), a lubricating and finishing agent (wool, worsted, cotton, rayon, and silk), a solvent for vat dyes, an intermediate (triethylene glycol and diethylene glycol dinitrate), a petroleum extraction solvent, and a monomer (unsaturated polyester resins and polyols for polyurethane); Also used in lacquers, cosmetics, antifreeze solutions for sprinkler systems; water seals for gas tanks, brake fluids, lubricants, mold release agents, and inks; [HSDB] Used mainly to produce unsaturated polyester resins, polyols, and polyurethanes; [Reference #1] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Industrial Processes with risk of exposure: Petroleum Production and Refining [Category: Industry]; Pulp and Paper Processing [Category: Industry]; Painting (Solvents) [Category: Paint]; Working with Glues and Adhesives [Category: Other]; Textiles (Printing, Dyeing, or Finishing) [Category: Industry] Quelle: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
- Uses: Production of polyurethane and unsaturated polyester resins, triethylene glycol; textile softener; petroleum solvent extraction; dehydration of natural gas, plasticizers, and surfactants; solvent for nitrocellulose and many dyes and oils; humectant for tobacco, casein, synthetic sponges, paper products; cork compositions, bookbinding adhesives, dyeing assistant, cosmetics, antifreeze solutions. Quelle: Hazardous Substances Data Bank (HSDB)
- Uses: In antifreeze soln for sprinkler systems; for water seals for gas tank; lubricating and finishing agent for wool, worsted, cotton, rayon and silk; solvent for vat dyes; in composition corks, glues, gelatin, casein, and pastes to prevent drying out. Quelle: Hazardous Substances Data Bank (HSDB)
- Uses: Diethylene glycol is used in gas conditioning and in the permanent antifreeze formulations; as a constituent of brake fluids, lubricants, mold release agents, and inks; as a softening agent for textiles; as a plasticizer for cork, adhesives, paper, packaging materials, and coatings; as an intermediate in the prodn of explosive diethylene glycol dinitrate; and as an intermediate in the production of certain resins, morpholine, and diethylene glycol esters and ethers. Quelle: Hazardous Substances Data Bank (HSDB)
- Uses: In lacquer industry and in cosmetics Quelle: Hazardous Substances Data Bank (HSDB)
- Uses: For more Uses (Complete) data for DIETHYLENE GLYCOL (9 total), please visit the HSDB record page. Quelle: Hazardous Substances Data Bank (HSDB)
Zugeordnet durch: Existing checksum-valid CAS to unique PubChem CID match. Abgerufen: 2026-08-31. Quelleneintrag öffnen
Wissenschaftliche Klassifizierungen und Gefahrenannotationen liefern Kontext und ersetzen nicht die oben gezeigte marktspezifische regulatorische Entscheidung.
Weitere Quellenabdeckung und Trefferstatus
| Quelle | Ergebnis | Geprüft |
|---|---|---|
| NIH PubChem PUG-View | Exakter Treffer | 2026-08-31 |
Ein erfasster Nicht-Treffer ist ein nützlicher Beleg dafür, dass die Quelle geprüft wurde; er ist keine Behauptung, dass der Stoff anderswo nicht existiert.
Am 2026-08-31 von NIH PubChem durch prüfsummengültigen CAS-Abgleich abgerufen. Chemische Eigenschaften ersetzen nicht die regulatorische Entscheidung auf dieser Seite.
Verzeichnisverknüpfungen für DIETHYLENE GLYCOL
BIS-ISOBUTYL PEG-24/PPG-7/DIMETHICONE COPOLYMER
BIS-ISOBUTYL PEG/PPG-10/7/DIMETHICONE COPOLYMER
DIETHYLENE GLYCOL/DMAP ACRYLAMIDE/PEG-180/HDI COPOLYMER
Verwandte Einträge zu DIETHYLENE GLYCOL
Für diesen Eintrag gibt es nur wenige direkte Treffer; daher werden auch nahe liegende Einträge aus Anhang III angezeigt.
Diethylene glycol (DEG); 2,2'-oxydiethanol for traces level, see Annex III
OPOPANAX CHIRONIUM RESIN EXTRACT
CI 19140 / ACID YELLOW 23
1-(5,6,7,8-Tetrahydro-3,5,5,6,8,8,-hexamethyl-2-naphthyl)ethan-1-one (AHTN)
ACID BLUE 9
Liquidambar styraciflua oil and extract (styrax)
Liquidambar orientalis oil and extract (styrax)
Was Anhang III für DIETHYLENE GLYCOL bedeutet
DIETHYLENE GLYCOL ist ein beschränkter Stoff nach Anhang III der EU-Kosmetikverordnung (EG) Nr. 1223/2009. Seine Verwendung in kosmetischen Mitteln ist nur unter den im obigen Eintrag genannten besonderen Bedingungen zulässig, einschließlich geltender Konzentrationsgrenzen, Beschränkungen der Produktart und erforderlicher Warnhinweise.
Wird dieser Stoff in einer Rezeptur verwendet, müssen alle Bedingungen – Höchstkonzentration, Produktbereich und Warnhinweise – gleichzeitig erfüllt sein. Die Einhaltung einer Bedingung hebt die anderen nicht auf.
Dieser Eintrag ist zum Abgleich von Namen und Kennungen mit 17 Inhaltsstoffen des CosIng-Verzeichnisses verknüpft. Die Seite zeigt außerdem 12 verwandte Anhangseinträge mit überschneidenden Kennungen, Anhangslogik oder Namensmustern.
Compliance-Checkliste
- Stellen Sie sicher, dass die Konzentration in der Rezeptur nicht überschreitet: 0.1%
- Prüfen Sie die Vereinbarkeit mit der Produktart: As traces in ingredients
- Dokumentieren Sie die Verwendungsbedingungen in der Produktinformationsdatei (PIF).
Häufig gestellte Fragen
Quellenhinweis zu Anhang III, Eintrag DIETHYLENE GLYCOL
Diese Seite fasst einen Eintrag aus Anhang III für DIETHYLENE GLYCOL aus öffentlichen Materialien der Europäischen Kommission zu kosmetischen Mitteln zusammen und ergänzt, soweit verfügbar, verknüpfte Treffer aus dem Verzeichnis oder bei Kennungen.
Nutzen Sie diese Eintragsseite, um die Bedingungen aus Anhang III für DIETHYLENE GLYCOL zu prüfen; bestätigen Sie jede endgültige regulatorische Entscheidung jedoch anhand des aktuellen amtlichen Anhangswortlauts und der Quelldateien.
Werkzeuge und nächste Schritte
Rezeptur prüfen
Fügen Sie eine vollständige INCI-Liste ein, um DIETHYLENE GLYCOL und andere markierte EU-Anhangseinträge in einem Durchgang zu finden.
INCI-CheckerEinträge vergleichen
DIETHYLENE GLYCOL nebeneinander mit einem anderen Anhangseintrag vergleichen, um Unterschiede bei Beschränkungen, Konzentrationen und Anhangszuordnung zu prüfen.
VergleichenDen Anhang durchsuchen
Alle Einträge in Anhang III ansehen und die regulatorischen Bedingungen der Stoffe in diesem Anhang vergleichen.
Anhang III öffnen