Aller au contenu principal
Annexe II Entrée 665 CMRModifiée 12 Aoû 2019

2-Methoxyethanol [1] and its acetate (2-Methoxyethyl acetate) [2]

2-Methoxyethanol [1] and its acetate (2-Methoxyethyl acetate) [2] figure à l’annexe II en tant que substance interdite dans les produits cosmétiques mis sur le marché de l’UE.

Substance interdite— Annexe II, Règlement (CE) n° 1223/2009
Entrée: 665
CMR

Détails de la fiche

Nom chimique

2-Methoxyethanol [1] and its acetate (2-Methoxyethyl acetate) [2]

Nom chimique / IUPAC

Ethylene Glycol Monomethyl Ether; EGMME

Informations réglementaires

Données clés

CAS
109-86-4[1] / 110-49-6[2]
EC
203-713-7[1] / 203-772-9[2]
Annexe
Numéro d’entrée
665

Identité et propriétés chimiques

Structure chimique 2D PubChem pour le CAS 109-86-4
CAS 109-86-4PubChem CID 8019

2-Methoxyethanol

2-methoxyethanol is a hydroxyether that is ethanol substituted by a methoxy group at position 2. It has a role as a solvent and a protic solvent. — ChEBI

Nom IUPAC
2-methoxyethanol
Formule moléculaire
C3H8O2
Masse moléculaire
76.09 g/mol
Masse exacte
76.052429494 Da
XLogP3
-0,8
Surface polaire topologique
29,5 Ų
Donneurs de liaisons hydrogène
1
Accepteurs de liaisons hydrogène
2
Unités covalentes
1
Stéréocentres définis
0

Également connu sous le nom de

Methyl cellosolveEthylene glycol monomethyl etherEthanol, 2-methoxy-Methyl oxitol2-Methoxy-1-ethanolDowanol EMMethylglykolEGME
16 autres noms signalés
Methoxyhydroxyethane3-Oxa-1-butanolMonomethyl glycolGlycol ether EMPristGlycol monomethyl ether1-Hydroxy-2-methoxyethaneJeffersol EMMECSMetil cellosolve2-MetossietanoloAmsco-Solv EE2-Methoxy-aethanolMethylcelosolvmethylcellosolveMetoksyetylowy alkohol
Identifiants de bases de données externes

Preuves issues de bases de données scientifiques complémentaires

NIH PubChem PUG-View
Correspondance exacte d’identifiant8019

Attributed physical-property, hazard, environmental and use annotations.

  • First Aid: EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.; SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.; INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) shou Source: CAMEO Chemicals
  • ERG2024, Guide 127 (Ethylene glycol monomethyl ether): General First Aid:; · Call 911 or emergency medical service.; · Ensure that medical personnel are aware of the material(s) involved, take precautions to protect themselves and avoid contamination.; · Move victim to fresh air if it can be done safely.; · Administer oxygen if breathing is difficult.; · If victim is not breathing:; -- DO NOT perform mouth-to-mouth resuscitation; the victim may have ingested or inhaled the substance.; -- If equipped and pulse detected, wash face and mouth, then give artificial respiration using a proper respiratory medical device (bag-valve mask, pocket mask equipped with a one-way valve or other device).; -- If no pulse detected or no respiratory medical device available, provide continuous compressions. Conduct a pulse check every two minutes or monitor for any signs of spontaneous respirations.; · Remove and isolate contaminated clothing and shoes.; · For minor skin contact, avoid spreading material on unaffected skin.; · In case of contact with substance, remove immediately by flushing skin or eyes with running water for at least 20 minutes.; · For severe burns, immediate medical attention is required.; · Effects of exposure (inhalation, ingestion, Source: Emergency Response Guidebook (ERG)
  • First Aid: (General first aid procedures); Eye: Irrigate immediately - If this chemical contacts the eyes, immediately wash (irrigate) the eyes with large amounts of water, occasionally lifting the lower and upper lids. Get medical attention immediately.; Skin: Water flush promptly - If this chemical contacts the skin, flush the contaminated skin with water promptly. If this chemical penetrates the clothing, immediately remove the clothing and flush the skin with water promptly. If irritation persists after washing, get medical attention.; Breathing: Respiratory support; Swallow: Medical attention immediately - If this chemical has been swallowed, get medical attention immediately. Source: The National Institute for Occupational Safety and Health (NIOSH)
  • Signal: Danger Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • GHS Hazard Statements: H226: Flammable liquid and vapor [Warning Flammable liquids]; H302: Harmful if swallowed [Warning Acute toxicity, oral]; H312: Harmful in contact with skin [Warning Acute toxicity, dermal]; H332: Harmful if inhaled [Warning Acute toxicity, inhalation]; H360FD: May damage fertility; May damage the unborn child [Danger Reproductive toxicity] Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Precautionary Statement Codes: P203, P210, P233, P240, P241, P242, P243, P261, P264, P270, P271, P280, P301+P317, P302+P352, P303+P361+P353, P304+P340, P317, P318, P321, P330, P362+P364, P370+P378, P403+P235, P405, and P501 (click each P-code to see the statement) Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Signal: Danger Source: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H226 (97%): Flammable liquid and vapor [Warning Flammable liquids]; H302+H312+H332 (41.2%): Harmful if swallowed, in contact with skin or if inhaled [Warning Acute toxicity, oral; acute toxicity, dermal; acute toxicity, inhalation]; H302 (96.9%): Harmful if swallowed [Warning Acute toxicity, oral]; H312 (97%): Harmful in contact with skin [Warning Acute toxicity, dermal]; H332 (94.5%): Harmful if inhaled [Warning Acute toxicity, inhalation]; H360 (93.8%): May damage fertility or the unborn child [Danger Reproductive toxicity]; H370 (10.6%): Causes damage to organs [Danger Specific target organ toxicity, single exposure]; H373 (14.1%): May causes damage to organs through prolonged or repeated exposure [Warning Specific target organ toxicity, repeated exposure] Source: European Chemicals Agency (ECHA)
  • Precautionary Statement Codes: P203, P210, P233, P240, P241, P242, P243, P260, P261, P264, P270, P271, P280, P301+P317, P302+P352, P303+P361+P353, P304+P340, P308+P316, P317, P318, P319, P321, P330, P362+P364, P370+P378, P403+P235, P405, and P501 (click each P-code to see the statement) Source: European Chemicals Agency (ECHA)
  • ECHA C&L Notifications Summary: Aggregated GHS information provided per 1202 reports by companies from 34 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Source: European Chemicals Agency (ECHA)
  • Signal: Danger Source: NITE-CMC
  • GHS Hazard Statements: H226: Flammable liquid and vapor [Warning Flammable liquids]; H312: Harmful in contact with skin [Warning Acute toxicity, dermal]; H332: Harmful if inhaled [Warning Acute toxicity, inhalation]; H335: May cause respiratory irritation [Warning Specific target organ toxicity, single exposure; Respiratory tract irritation]; H336: May cause drowsiness or dizziness [Warning Specific target organ toxicity, single exposure; Narcotic effects]; H360: May damage fertility or the unborn child [Danger Reproductive toxicity]; H370: Causes damage to organs [Danger Specific target organ toxicity, single exposure]; H372: Causes damage to organs through prolonged or repeated exposure [Danger Specific target organ toxicity, repeated exposure] Source: NITE-CMC
  • Precautionary Statement Codes: P203, P210, P233, P240, P241, P242, P243, P260, P261, P264, P270, P271, P280, P302+P352, P303+P361+P353, P304+P340, P308+P316, P317, P318, P319, P321, P362+P364, P370+P378, P403+P233, P403+P235, P405, and P501 (click each P-code to see the statement) Source: NITE-CMC
  • GHS Hazard Statements: H226: Flammable liquid and vapor [Warning Flammable liquids]; H312: Harmful in contact with skin [Warning Acute toxicity, dermal]; H331: Toxic if inhaled [Danger Acute toxicity, inhalation]; H360: May damage fertility or the unborn child [Danger Reproductive toxicity]; H370: Causes damage to organs [Danger Specific target organ toxicity, single exposure]; H372: Causes damage to organs through prolonged or repeated exposure [Danger Specific target organ toxicity, repeated exposure] Source: NITE-CMC
  • Precautionary Statement Codes: P203, P210, P233, P240, P241, P242, P243, P260, P261, P264, P270, P271, P280, P302+P352, P303+P361+P353, P304+P340, P308+P316, P316, P317, P318, P319, P321, P362+P364, P370+P378, P403+P233, P403+P235, P405, and P501 (click each P-code to see the statement) Source: NITE-CMC
  • Toxicity Summary: IDENTIFICATION AND USE: 2-Methoxyethanol (2-ME) is a colorless liquid with ether-like odor. It is used as a solvent for cellulose acetate, natural and synthetic resins, some alcohol-soluble dyes; in nail polishes, quick-drying varnishes and enamels, and wood stains. It is also used as a as a jet fuel de-icer. HUMAN EXPOSURE AND TOXICITY: The substance is mildly irritating to the eyes and respiratory tract and may cause effects on the central nervous system, blood, bone marrow, kidneys and liver. Exposure at high levels could cause unconsciousness. The liquid defats the skin. Two non-fatal cases of poisoning by consuming 100 mL 2-ME in men aged 41 and 23 were reported. In addition to agitation and confusion, the predominant clinical features were nausea, cyanosis, hyperventilation, slight tachycardia, and metabolic acidosis. In one patient there were suggestions of moderate kidney failure. No evidence of liver damage was found and both patients recovered within 4 weeks. Chronic poisonings from vapors lead to toxic encephalopathy and evidence of bone marrow depression without hemolysis. Lung, kidney and liver changes have been observed. It was found that individuals exposed in utero Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Bioconcentration: An estimated BCF of 3 was calculated in fish for 2-methyoxyethanol(SRC), using a log Kow of -0.77(1) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests the potential for bioconcentration in aquatic organisms is low(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 1(SRC), determined from a log Kow of -0.77(2) and a regression-derived equation(3), indicates that 2-methoxyethanol is expected to have very high mobility in soil(SRC). Volatilization of 2-methoxyethanol from moist soil surfaces is expected to be an environmental fate process(SRC) given a Henry's Law constant of 3.3X10-7 atm-cu m/mole(4). The potential for volatilization of 2-methoxyethanol from dry soil surfaces may exist(SRC) based upon a vapor pressure of 9.5 mm Hg(5). Utilizing the Japanese MITI test, 83% of the Theoretical BOD was reached in 2 weeks(6) indicating that biodegradation is an important environmental fate process in soil(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 1(SRC), determined from a log Kow of -0.77(2) and a regression-derived equation(3), indicates that 2-methoxyethanol is not expected to adsorb to suspended solids and sediment(SRC). Volatilization from water surfaces may occur(4) based upon a Henry's Law constant of 3.3X10-7 atm-cu m/mole(5). Using this Henry's Law constant and an estimation method(3), volatilization half-lives for a model river and model lake are 97 days and 700 days, respectively(SRC). According to a classification scheme(6), an estimated BCF of 3(SRC), from its log Kow(2) and a regression-derived equation(3), suggests the potential for bioconcentration in aquatic organisms is low(SRC). Utilizing the Japanese MITI test, 83% of the Theoretical BOD was reached in 2 weeks(7) indicating that biodegradation is an important environmental fate process in water(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), 2-methoxyethanol, which has a vapor pressure of 9.5 mm Hg at 25 °C(2), is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase 2-methoxyethanol is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 31 hours(SRC), calculated from its rate constant of 1.25X10-11 cu cm/molecule-sec at 25 °C(3). 2-Methoxyethanol does not contain chromophores that absorb at wavelengths >290 nm(4) and, therefore, is not expected to be susceptible to direct photolysis by sunlight(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Industry Uses: Solvent; Absorbent; Humectant; Fuel agents; Processing aids not otherwise specified; Adhesion/cohesion promoter; Intermediate Source: EPA Chemical Data Reporting (CDR)
  • Cosmetic Ingredient Review Link: CIR ingredient: 2-Methoxyethanol Source: Cosmetic Ingredient Review (CIR)
  • Sources/Uses: Used as a solvent for many different purposes, (e.g., varnishes, dyes, and resins) and as a jet deicing additive; [ACGIH] Used in the Asian microelectronics industry in photoresist formulations and in manufacturing copper-laminate circuit boards; [JOEM 2004;46:707-713] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Industrial Processes with risk of exposure: Semiconductor Manufacturing [Category: Industry]; Painting (Solvents) [Category: Paint]; Textiles (Printing, Dyeing, or Finishing) [Category: Industry] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Uses: For 2-methoxyethanol (USEPA/OPP Pesticide Code: 042202) there are 0 labels match. /SRP: Not registered for current use in the U.S., but approved pesticide uses may change periodically and so federal, state and local authorities must be consulted for currently approved uses./ Source: Hazardous Substances Data Bank (HSDB)
  • Uses: The active ingredient is no longer contained in any registered products ... "cancelled." Source: Hazardous Substances Data Bank (HSDB)
  • Uses: Solvent for nitrocellulose, ... solvent mixtures, lacquers, ... perfume fixative, ... jet fuel deicing additive. Source: Hazardous Substances Data Bank (HSDB)
  • Uses: Solvent for low viscosity cellulose acetate, natural resins, some synthetic resins and some alc-sol dyes; in dyeing leather; sealing moisture-proof cellophane; in nail polishes, quick drying varnishes and enamels, wood stains. In modified Karl Fischer reagent. Source: Hazardous Substances Data Bank (HSDB)
  • Uses: For more Uses (Complete) data for 2-METHOXYETHANOL (8 total), please visit the HSDB record page. Source: Hazardous Substances Data Bank (HSDB)
  • Uses: Methyl cellosolve, is a clear and colorless liquid at room temperature mainly used as a solvent. It is used for many purposes including varnishes, dyes, resins, printing, finishing textile, and semiconductor manufacturing. Source: Toxin and Toxin Target Database (T3DB)

Mis en correspondance par: Existing checksum-valid CAS to unique PubChem CID match. Récupéré le: 2026-08-31. Ouvrir la fiche source

Les classifications scientifiques et les annotations de danger apportent du contexte et ne remplacent pas la décision réglementaire propre au marché indiquée ci-dessus.

Couverture des sources complémentaires et état des correspondances
SourceRésultatVérifié
NIH PubChem PUG-ViewCorrespondance exacte2026-08-31

Une absence de correspondance enregistrée est une preuve utile que la source a été vérifiée ; ce n’est pas l’affirmation que la substance n’existe pas ailleurs.

Récupéré depuis NIH PubChem le 2026-08-31 par correspondance CAS à somme de contrôle valide. Les propriétés chimiques ne remplacent pas la décision réglementaire de cette page.

Structure chimique 2D PubChem pour le CAS 110-49-6
CAS 110-49-6PubChem CID 8054

Ethylene glycol monomethyl ether acetate

Ethylene Glycol Monomethyl Ether Acetate can cause developmental toxicity and male reproductive toxicity according to The National Institute for Occupational Safety and Health (NIOSH). — California Office of Environmental Health Hazard Assessment (OEHHA)

Nom IUPAC
2-methoxyethyl acetate
Formule moléculaire
C5H10O3
Masse moléculaire
118.13 g/mol
Masse exacte
118.062994177 Da
XLogP3
0,0
Surface polaire topologique
35,5 Ų
Donneurs de liaisons hydrogène
0
Accepteurs de liaisons hydrogène
3
Unités covalentes
1
Stéréocentres définis
0

Également connu sous le nom de

Methyl glycol acetateMeCsac2-Methoxyethanol acetateMETHYL CELLOSOLVE ACETATEAcetic acid 2-methoxyethyl esterEthanol, 2-methoxy-, acetateMethylglykolacetatAcetyl methyl cellosolve
16 autres noms signalés
MethylglycolacetateMethylcelosolvacetatMethyl glycol monoacetateEthylene glycol methyl ether acetateGlycol monomethyl ether acetate2-Methoxyethanol, acetate2-Metossietilacetato2-MethoxyaethylacetatEGMEAmethoxyethanol acetateMethylcellosolveacetate2-Methyoxyethylacetate2-Methoxy-ethyl acetaatbeta-Methoxyethyl acetateMethyl cellosolye acetaatAcetate de methyle glycol
Identifiants de bases de données externes

Preuves issues de bases de données scientifiques complémentaires

NIH PubChem PUG-View
Correspondance exacte d’identifiant8054

Attributed physical-property, hazard, environmental and use annotations.

  • First Aid: EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.; SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.; INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) shou Source: CAMEO Chemicals
  • ERG2024, Guide 129 (Ethylene glycol monomethyl ether acetate): General First Aid:; · Call 911 or emergency medical service.; · Ensure that medical personnel are aware of the material(s) involved, take precautions to protect themselves and avoid contamination.; · Move victim to fresh air if it can be done safely.; · Administer oxygen if breathing is difficult.; · If victim is not breathing:; -- DO NOT perform mouth-to-mouth resuscitation; the victim may have ingested or inhaled the substance.; -- If equipped and pulse detected, wash face and mouth, then give artificial respiration using a proper respiratory medical device (bag-valve mask, pocket mask equipped with a one-way valve or other device).; -- If no pulse detected or no respiratory medical device available, provide continuous compressions. Conduct a pulse check every two minutes or monitor for any signs of spontaneous respirations.; · Remove and isolate contaminated clothing and shoes.; · For minor skin contact, avoid spreading material on unaffected skin.; · In case of contact with substance, remove immediately by flushing skin or eyes with running water for at least 20 minutes.; · For severe burns, immediate medical attention is required.; · Effects of exposure (inhalation, ingestion, Source: Emergency Response Guidebook (ERG)
  • First Aid: (General first aid procedures); Eye: Irrigate immediately - If this chemical contacts the eyes, immediately wash (irrigate) the eyes with large amounts of water, occasionally lifting the lower and upper lids. Get medical attention immediately.; Skin: Water flush promptly - If this chemical contacts the skin, flush the contaminated skin with water promptly. If this chemical penetrates the clothing, immediately remove the clothing and flush the skin with water promptly. If irritation persists after washing, get medical attention.; Breathing: Respiratory support; Swallow: Medical attention immediately - If this chemical has been swallowed, get medical attention immediately. Source: The National Institute for Occupational Safety and Health (NIOSH)
  • Signal: Danger Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • GHS Hazard Statements: H302: Harmful if swallowed [Warning Acute toxicity, oral]; H312: Harmful in contact with skin [Warning Acute toxicity, dermal]; H332: Harmful if inhaled [Warning Acute toxicity, inhalation]; H360FD: May damage fertility; May damage the unborn child [Danger Reproductive toxicity] Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Precautionary Statement Codes: P203, P261, P264, P270, P271, P280, P301+P317, P302+P352, P304+P340, P317, P318, P321, P330, P362+P364, P405, and P501 (click each P-code to see the statement) Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Signal: Danger Source: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H226 (39.6%): Flammable liquid and vapor [Warning Flammable liquids]; H302+H312+H332 (38.6%): Harmful if swallowed, in contact with skin or if inhaled [Warning Acute toxicity, oral; acute toxicity, dermal; acute toxicity, inhalation]; H302 (100%): Harmful if swallowed [Warning Acute toxicity, oral]; H312 (100%): Harmful in contact with skin [Warning Acute toxicity, dermal]; H332 (100%): Harmful if inhaled [Warning Acute toxicity, inhalation]; H360 (99%): May damage fertility or the unborn child [Danger Reproductive toxicity] Source: European Chemicals Agency (ECHA)
  • Precautionary Statement Codes: P203, P210, P233, P240, P241, P242, P243, P261, P264, P270, P271, P280, P301+P317, P302+P352, P303+P361+P353, P304+P340, P317, P318, P321, P330, P362+P364, P370+P378, P403+P235, P405, and P501 (click each P-code to see the statement) Source: European Chemicals Agency (ECHA)
  • ECHA C&L Notifications Summary: Aggregated GHS information provided per 101 reports by companies from 8 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Source: European Chemicals Agency (ECHA)
  • Signal: Danger Source: NITE-CMC
  • GHS Hazard Statements: H226: Flammable liquid and vapor [Warning Flammable liquids]; H320: Causes eye irritation [Warning Serious eye damage/eye irritation]; H336: May cause drowsiness or dizziness [Warning Specific target organ toxicity, single exposure; Narcotic effects]; H360: May damage fertility or the unborn child [Danger Reproductive toxicity]; H370: Causes damage to organs [Danger Specific target organ toxicity, single exposure]; H372: Causes damage to organs through prolonged or repeated exposure [Danger Specific target organ toxicity, repeated exposure] Source: NITE-CMC
  • Precautionary Statement Codes: P203, P210, P233, P240, P241, P242, P243, P260, P261, P264, P264+P265, P270, P271, P280, P303+P361+P353, P304+P340, P305+P351+P338, P308+P316, P318, P319, P321, P337+P317, P370+P378, P403+P233, P403+P235, P405, and P501 (click each P-code to see the statement) Source: NITE-CMC
  • GHS Hazard Statements: H226: Flammable liquid and vapor [Warning Flammable liquids]; H320: Causes eye irritation [Warning Serious eye damage/eye irritation]; H331: Toxic if inhaled [Danger Acute toxicity, inhalation]; H360: May damage fertility or the unborn child [Danger Reproductive toxicity]; H370: Causes damage to organs [Danger Specific target organ toxicity, single exposure]; H373: May causes damage to organs through prolonged or repeated exposure [Warning Specific target organ toxicity, repeated exposure]; H402: Harmful to aquatic life [Hazardous to the aquatic environment, acute hazard]; H411: Toxic to aquatic life with long lasting effects [Hazardous to the aquatic environment, long-term hazard] Source: NITE-CMC
  • Precautionary Statement Codes: P203, P210, P233, P240, P241, P242, P243, P260, P261, P264, P264+P265, P270, P271, P273, P280, P303+P361+P353, P304+P340, P305+P351+P338, P308+P316, P316, P318, P319, P321, P337+P317, P370+P378, P391, P403+P233, P403+P235, P405, and P501 (click each P-code to see the statement) Source: NITE-CMC
  • NFPA Health Rating: 0 - Materials that, under emergency conditions, would offer no hazard beyond that of ordinary combustible materials. Source: Hazardous Substances Data Bank (HSDB)
  • NFPA Fire Rating: 2 - Materials that must be moderately heated or exposed to relatively high ambient temperatures before ignition can occur. Materials would not under normal conditions form hazardous atmospheres with air, but under high ambient temperatures or under moderate heating could release vapor in sufficient quantities to produce hazardous atmospheres with air. Source: Hazardous Substances Data Bank (HSDB)
  • NFPA Instability Rating: 0 - Materials that in themselves are normally stable, even under fire conditions. Source: Hazardous Substances Data Bank (HSDB)
  • Toxicity Summary: ... The methyl and ethyl ethers of ethylene glycol, ie 2- methoxyethanol (2-ME) esters, 2-methoxyethyl acetate (2-MEA) and 2-ethoxyethyl acetate (2- EEA) ... are all stable, and are all miscible with (or in the case of 2-EEA very soluble in) water and miscible with a large number of organic solvents. ... The solubility of these glycol ethers in water and their relatively low vapor pressure could result in their build-up in water in the absence of degradation. However, degradation by microorganisms in soil, sewage sludge, and water appears to prevent this possibility. Atmospheric emissions resulting from the use of glycol ethers as evaporative solvents result in the greatest environmental exposure.... Effects on Organisms in the Environment: The toxicity of 2-ME and 2-EE to microorganisms and aquatic animals appears to be low. ... The glycol ether acetates (2-MEA and 2-EEA) are far more toxic to fish. The LC50 of 2-EEA for fathead minnows is 46 mg/L and that of 2-MEA for tidewater silverfish and bluegills is 45 mg/L. ... Effects on Experimental Animals and In Vitro Test Systems: Systemic toxicity: The toxicity of 2-ME and 2-EE to experimental animals has been much more widely studie Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Bioconcentration: An estimated BCF of 3.2 was calculated for methyl cellosolve acetate(SRC), using an estimated log Kow of 0.10(1) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests that bioconcentration in aquatic organisms is low(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 30(SRC), determined from an estimated log Kow of 0.10(2) and a regression-derived equation(3), indicates that methyl cellosolve acetate is expected to have very high mobility in soil(SRC). Volatilization of methyl cellosolve acetate from moist soil surfaces is expected to be an important fate process(SRC) given an estimated Henry's Law constant of 1.1X10-6 atm-cu m/mole(SRC) derived from its vapor pressure, 7.0 mm Hg at 20 °C(4), and assigned value for water solubility of 1.0X10+6 mg/L (miscible)(5). The potential for volatilization of methyl cellosolve acetate from dry soil surfaces may exist(SRC) based on its vapor pressure(4). Using aqueous screening tests methyl cellosolve acetate reached 30 to 86.9% of its theoretical BOD over a period of 5 to 14 days(6,7), suggesting that biodegradation may be an important environmental fate process in soil(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 30(SRC), determined from an estimated log Kow of 0.10(2) and a regression-derived equation(3), indicates that methyl cellosolve acetate is not expected to adsorb to suspended solids and sediment(SRC). Volatilization from water surfaces is expected(3) based upon an estimated Henry's Law constant of 1.1X10-6 atm-cu m/mole(SRC) derived from its vapor pressure, 7.0 mm Hg(4), and assigned value for water solubility of 1.0X10+6 mg/L (miscible)(5). Using this Henry's Law constant and an estimation method(3), volatilization half-lives for a model river and model lake are 24 days and 270 days, respectively(SRC). According to a classification scheme(6), an estimated BCF of 3.2(3), from an estimated log Kow(2), and a regression derived equation(7) suggests that bioconcentration in aquatic organisms is low(SRC). Hydrolysis half-lives of 140 and 14 days at pH values of 7 and 8, respectively(10), suggest that hydrolysis is not expected to be an important process except under basic conditions(SRC). Using aqueous screening tests, methyl cellosolve acetate reached 30 to 86.9% of its theoretical BOD over a period of 5 to 14 Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), methyl cellosolve acetate, which has a measured vapor pressure of 7.0 mm Hg at 20 °C(2), is expected to exist solely as a vapor in the ambient atmosphere. Vapor-phase methyl cellosolve acetate is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be about 1.1 days(SRC) calculated from its rate constant of 9.7X10-12 cu cm/molecule-sec at 25 °C(SRC)that was derived using a structure estimation method(3). Methyl cellosolve acetate does not contain chromophores that absorb at wavelengths >290 nm(4) and therefore is not expected to be susceptible to direct photolysis by sunlight(SRC). Source: Hazardous Substances Data Bank (HSDB)

Mis en correspondance par: Existing checksum-valid CAS to unique PubChem CID match. Récupéré le: 2026-08-31. Ouvrir la fiche source

Les classifications scientifiques et les annotations de danger apportent du contexte et ne remplacent pas la décision réglementaire propre au marché indiquée ci-dessus.

Couverture des sources complémentaires et état des correspondances
SourceRésultatVérifié
NIH PubChem PUG-ViewCorrespondance exacte2026-08-31

Une absence de correspondance enregistrée est une preuve utile que la source a été vérifiée ; ce n’est pas l’affirmation que la substance n’existe pas ailleurs.

Récupéré depuis NIH PubChem le 2026-08-31 par correspondance CAS à somme de contrôle valide. Les propriétés chimiques ne remplacent pas la décision réglementaire de cette page.

Liens d’inventaire pour 2-Methoxyethanol [1] and its acetate (2-Methoxyethyl acetate) [2]

Inventaire Restriction reference
Réf. 84967

METHOXYETHANOL

CAS: 109-86-4 / 32718-54-0
EC: 203-713-7 / 251-174-1
Inventaire Restriction reference
Réf. 96276

METHOXYETHANOL

CAS: 109-86-4
EC: 203-713-7

Les correspondances directes sont limitées pour cette fiche ; des entrées voisines de l’annexe II sont donc également affichées.

Annexe II 668
Fiche voisine dans la même annexe

2-Methoxypropanol

CAS: 1589-47-5
EC: 216-455-5
Annexe II 669
Fiche voisine dans la même annexe

Propiolactone

CAS: 57-57-8
EC: 200-340-1

Ce que signifie l’annexe II pour 2-Methoxyethanol [1] and its acetate (2-Methoxyethyl acetate) [2]

2-Methoxyethanol [1] and its acetate (2-Methoxyethyl acetate) [2] figure comme substance interdite à l’annexe II du règlement (CE) n° 1223/2009 relatif aux produits cosmétiques et ne doit pas être ajouté intentionnellement. L’article 17 traite séparément des traces involontaires, techniquement inévitables dans le respect des bonnes pratiques de fabrication et compatibles avec l’exigence de sécurité de l’article 3.

Les formulateurs doivent contrôler leurs ingrédients et matières premières afin de s’assurer qu’aucun ne contient cette substance. Les fournisseurs doivent fournir, sur demande, une documentation confirmant son absence.

Cette fiche est liée à 3 ingrédients de l’inventaire CosIng pour le recoupement des noms et des identifiants. La page fait également apparaître 12 fiches d’annexe associées présentant des identifiants, une logique d’annexe ou des schémas de dénomination qui se recoupent.

Liste de contrôle de conformité

  • Vérifiez que cette substance est absente de toutes les matières premières et formulations finies.
  • Demandez aux fournisseurs de matières premières une attestation d’absence ou un certificat d’analyse.
  • Consignez le résultat du contrôle dans le dossier d’information produit (DIP).
  • Cette substance a une classification CMR. Examinez le tableau CMR ci-dessus et vérifiez le statut actuel dans les annexes II/III avant toute utilisation.

Questions fréquentes

Oui. 2-Methoxyethanol [1] and its acetate (2-Methoxyethyl acetate) [2] figure à l’annexe II du règlement (CE) n° 1223/2009 relatif aux produits cosmétiques et est interdit en tant qu’ingrédient cosmétique ajouté intentionnellement. L’article 17 prévoit une exception étroite pour les petites quantités involontaires techniquement inévitables dans le respect des bonnes pratiques de fabrication, à condition que le produit reste sûr au sens de l’article 3.

Le CAS 109-86-4 [1] / 110-49-6 [2] est l’identifiant numérique unique attribué à 2-Methoxyethanol [1] and its acetate (2-Methoxyethyl acetate) [2] par le Chemical Abstracts Service. Dans les travaux de conformité cosmétique, le numéro CAS sert à recouper la substance entre les bases de données réglementaires, les spécifications de matières premières et les rapports d’évaluation de la sécurité. Plusieurs entrées d’annexe de l’UE peuvent partager le même numéro CAS si la même substance apparaît dans des conditions différentes ou dans des annexes différentes.

2-Methoxyethanol [1] and its acetate (2-Methoxyethyl acetate) [2] a une classification CMR (cancérogène, mutagène ou toxique pour la reproduction) en vertu du règlement CLP de l’UE. Selon l’article 15 du règlement (CE) n° 1223/2009 relatif aux produits cosmétiques, les substances CMR des catégories 1A ou 1B sont interdites dans les cosmétiques, sauf autorisation expresse. Les substances CMR de catégorie 2 ne peuvent être utilisées que si le SCCS les a jugées sûres. Vérifiez toujours le statut actuel dans les annexes et les éventuelles dérogations applicables avant toute utilisation.

Utilisez l’outil Vérificateur INCI de ce site pour coller votre liste complète d’ingrédients (INCI) et l’analyser par rapport à toutes les entrées des annexes II à VI. L’outil met en évidence les ingrédients correspondant à des fiches soumises à restrictions, interdites ou signalées comme allergènes. C’est utile pour un contrôle rapide de conformité des formules de produits finis ou des déclarations de matières premières.

Note de source pour la fiche 2-Methoxyethanol [1] and its acetate (2-Methoxyethyl acetate) [2] de l’annexe II

Cette page résume une fiche de l’annexe II pour 2-Methoxyethanol [1] and its acetate (2-Methoxyethyl acetate) [2] à partir de documents publics de la Commission européenne sur les cosmétiques et ajoute les correspondances d’inventaire ou d’identifiants associées lorsqu’elles sont disponibles.

Utilisez cette page de fiche pour examiner les conditions de l’annexe II pour 2-Methoxyethanol [1] and its acetate (2-Methoxyethyl acetate) [2], mais confirmez toute décision réglementaire finale auprès du libellé officiel en vigueur de l’annexe et des fichiers sources.

Outils et étapes suivantes

Vérifiez votre formule

Collez une liste INCI complète pour détecter 2-Methoxyethanol [1] and its acetate (2-Methoxyethyl acetate) [2] et d’autres fiches d’annexe de l’UE signalées en une seule passe.

Vérificateur INCI

Comparer des entrées

Comparez 2-Methoxyethanol [1] and its acetate (2-Methoxyethyl acetate) [2] côte à côte avec une autre fiche d’annexe pour examiner les différences de restrictions, de concentrations et d’annexe.

Comparer

Parcourir l’annexe

Consultez toutes les fiches de l’annexe II et comparez les conditions réglementaires entre les substances de cette annexe.

Ouvrir l’annexe II