Aller au contenu principal
Annexe II Entrée 1681 CMRModifiée 11 Nov 2022

Tetrafluoroethylene

Tetrafluoroethylene figure à l’annexe II en tant que substance interdite dans les produits cosmétiques mis sur le marché de l’UE.

Substance interdite— Annexe II, Règlement (CE) n° 1223/2009
Entrée: 1681
CMR

Détails de la fiche

Nom chimique

Tetrafluoroethylene

Nom chimique / IUPAC

Tetrafluoroethylene

Informations réglementaires

Règlement

(EU) 2022/1531

Voir toutes les entrées fixées par cet acte

CMR

CatégorieCarcinogenicMutagenicReprotoxic
Cat. 1B✓——

Données clés

Annexe
Numéro d’entrée
1681

Identité et propriétés chimiques

Structure chimique 2D PubChem pour le CAS 116-14-3
CAS 116-14-3PubChem CID 8301

Tetrafluoroethylene

Tetrafluoroethene is a fluorocarbon. — ChEBI

Nom IUPAC
1,1,2,2-tetrafluoroethene
Formule moléculaire
C2F4
Masse moléculaire
100.01 g/mol
Masse exacte
99.99361265 Da
XLogP3
1,3
Surface polaire topologique
0,0 Ų
Donneurs de liaisons hydrogène
0
Accepteurs de liaisons hydrogène
4
Unités covalentes
1
Stéréocentres définis
0

Également connu sous le nom de

TetrafluoroethenePerfluoroethylenePerfluoroetheneFluoroplast 41,1,2,2-TetrafluoroethyleneEthene, tetrafluoro-Ethylene, tetrafluoro-Tetrafluoroethylene monomer
16 autres noms signalés
TetrafluorethyleneOMW63Z518SCHEBI:38866ethylene tetrafluorideRefChem:6295204-126-9NSC451C2F4PerfluoraethylenTetrafluoraethenTetrafluoraethylenF2C=CF2Polytetrafluoroethylene preparationEthene, 1,1,2,2-tetrafluoro-TetrafluoretheneFluoropolymer, Fluorinated polymer, PTFE
Identifiants de bases de données externes

Preuves issues de bases de données scientifiques complémentaires

NIH PubChem PUG-View
Correspondance exacte d’identifiant8301

Attributed physical-property, hazard, environmental and use annotations.

  • First Aid: EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.; SKIN: CAUTION: Exposure of skin to compressed gases may result in freezing of the skin. Treatment for frostbite may be necessary. Remove the victim from the source of contamination. IMMEDIATELY wash affected areas gently with COLD water (and soap, if necessary) while removing and isolating all contaminated clothing. Dry carefully with clean, soft towels. If symptoms such as inflammation or irritation develop, IMMEDIATELY call a physician or go to a hospital for treatment.; INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a ho Source: CAMEO Chemicals
  • ERG2024, Guide 116P (Tetrafluoroethylene, stabilized): General First Aid:; · Call 911 or emergency medical service.; · Ensure that medical personnel are aware of the material(s) involved, take precautions to protect themselves and avoid contamination.; · Move victim to fresh air if it can be done safely.; · Administer oxygen if breathing is difficult.; · If victim is not breathing:; -- DO NOT perform mouth-to-mouth resuscitation; the victim may have ingested or inhaled the substance.; -- If equipped and pulse detected, wash face and mouth, then give artificial respiration using a proper respiratory medical device (bag-valve mask, pocket mask equipped with a one-way valve or other device).; -- If no pulse detected or no respiratory medical device available, provide continuous compressions. Conduct a pulse check every two minutes or monitor for any signs of spontaneous respirations.; · Remove and isolate contaminated clothing and shoes.; · For minor skin contact, avoid spreading material on unaffected skin.; · In case of contact with substance, remove immediately by flushing skin or eyes with running water for at least 20 minutes.; · For severe burns, immediate medical attention is required.; · Effects of exposure (inhalation, ingestion, Source: Emergency Response Guidebook (ERG)
  • Signal: Danger Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • GHS Hazard Statements: H350: May cause cancer [Danger Carcinogenicity] Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Precautionary Statement Codes: P203, P280, P318, P405, and P501 (click each P-code to see the statement) Source: Regulation (EC) No 1272/2008 of the European Parliament and of the Council
  • Note: This chemical does not meet GHS hazard criteria for 59.3% (481 of 811) of all reports. Source: European Chemicals Agency (ECHA)
  • Signal: Danger Source: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H220 (30.7%): Extremely flammable gas [Danger Flammable gases]; H280 (36.6%): Contains gas under pressure; may explode if heated [Warning Gases under pressure]; H350 (36%): May cause cancer [Danger Carcinogenicity]; H371 (32.2%): May cause damage to organs [Warning Specific target organ toxicity, single exposure] Source: European Chemicals Agency (ECHA)
  • Precautionary Statement Codes: P203, P210, P222, P260, P264, P270, P280, P308+P316, P318, P377, P381, P403, P405, P410+P403, and P501 (click each P-code to see the statement) Source: European Chemicals Agency (ECHA)
  • ECHA C&L Notifications Summary: Aggregated GHS information provided per 811 reports by companies from 12 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Reported as not meeting GHS hazard criteria per 481 of 811 reports by companies.; There are 11 notifications provided by 330 of 811 reports by companies with hazard statement code(s).; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Source: European Chemicals Agency (ECHA)
  • Signal: Danger Source: NITE-CMC
  • GHS Hazard Statements: H350: May cause cancer [Danger Carcinogenicity] Source: NITE-CMC
  • Precautionary Statement Codes: P203, P280, P318, P405, and P501 (click each P-code to see the statement) Source: NITE-CMC
  • GHS Hazard Statements: H220: Extremely flammable gas [Danger Flammable gases]; H231: May react explosively even in the absence of air at elevated pressure and/or temperature [Danger Flammable gases]; H280: Contains gas under pressure; may explode if heated [Warning Gases under pressure]; H320: Causes eye irritation [Warning Serious eye damage/eye irritation]; H351: Suspected of causing cancer [Warning Carcinogenicity]; H371: May cause damage to organs [Warning Specific target organ toxicity, single exposure]; H373: May causes damage to organs through prolonged or repeated exposure [Warning Specific target organ toxicity, repeated exposure] Source: NITE-CMC
  • NFPA Health Rating: 2 - Materials that, under emergency conditions, can cause temporary incapacitation or residual injury. Source: Hazardous Substances Data Bank (HSDB)
  • NFPA Fire Rating: 4 - Materials that rapidly or completely vaporize at atmospheric pressure and normal ambient temperature or that are readily dispersed in air and burn readily. Source: Hazardous Substances Data Bank (HSDB)
  • NFPA Instability Rating: 3 - Materials that in themselves are capable of detonation or explosive decomposition or explosive reaction but that require a strong initiating source or must be heated under confinement before initiation. Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Bioconcentration: An estimated BCF of 3 was calculated in fish for tetrafluoroethylene(SRC), using an estimated/ log Kow of 1.21(1) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests the potential for bioconcentration in aquatic organisms is low(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 95(SRC), determined from a structure estimation method(2), indicates that tetrafluoroethylene is expected to have high mobility in soil(SRC). Volatilization of tetrafluoroethylene from moist soil surfaces is expected to be an important fate process(SRC) given an estimated Henry's Law constant of 0.63 atm-cu m/mole(SRC), based upon its vapor pressure, 2.45X10+4 mm Hg(3), and water solubility, 159 mg/L(4). Tetrafluoroethylene is expected to volatilize from dry soil surfaces(SRC) based upon its vapor pressure(3). Biodegradation data were not available(SRC, 2010). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 95(SRC), determined from a structure estimation method(2), indicates that tetrafluoroethylene is not expected to adsorb to suspended solids and sediment(SRC). Volatilization from water surfaces is expected(3) based upon an estimated Henry's Law constant of 0.63 atm-cu m/mole(SRC), derived from its vapor pressure, 2.45X10+4 mm Hg(4), and water solubility, 159 mg/L(5). Using this Henry's Law constant and an estimation method(3), volatilization half-lives for a model river and model lake are 3 hours and 4 days, respectively(SRC). According to a classification scheme(6), an estimated BCF of 3(SRC), from an estimated log Kow of 1.21(7) and a regression-derived equation(8), suggests the potential for bioconcentration in aquatic organisms is low(SRC). Biodegradation data were not available(SRC, 2010). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), tetrafluoroethylene, which has a vapor pressure of 2.45X10+4 mm Hg at 25 °C(2), is expected to exist solely as a gas in the ambient atmosphere. Gas-phase tetrafluoroethylene is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to be 17 hours(SRC), calculated from its rate constant of 1.13X10-11 cu cm/molecule-sec at 298 K(3). Gas-phase tetrafluoroethylene will be degraded in the atmosphere by reaction with ozone(3,4) and nitrate radicals(3). The rate constant for the vapor-phase reaction of tetrafluoroethylene with photochemically-produced hydroxyl radicals has been estimated as 1.13X10-11 cu cm/molecule-sec at 298 K(1). The rate constant for the vapor-phase reaction of tetrafluoroethylene with ozone has been reported as 4.8X10-21 cu cm/molecule-sec at 298 K(1). The Global Warming Potential is considered to be negligible(5). Tetrafluoroethylene does not contain chromophores that absorb at wavelengths >290 nm(6), and therefore is not expected to be susceptible to dire Source: Hazardous Substances Data Bank (HSDB)
  • Sources/Uses: Used to produce polytetrafluoroethylene polymers (Teflon); [ACGIH] Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
  • Uses: In prepn of propellants for food product aerosols Source: Hazardous Substances Data Bank (HSDB)
  • Uses: MONOMER FOR POLYTETRAFLUOETHYLENE RESINS; CHEM INT FOR HEXAFLUOROPROPYLENE; COMONOMER FOR PERFLUOROALKOXY RESINS, FLUORINATED ETHYLENE-PROPYLENE RESINS, & ETHYLENE-TETRAFLUOROETHYLENE RESINS; TERMONOMER WITH VINYLIDENE FLUORIDE & HEXAFLUOROPROPYLENE Source: Hazardous Substances Data Bank (HSDB)
  • Uses: Used as a copolymer with hexafluoropropylene to substitute for polytetrafluoroethylene Source: Hazardous Substances Data Bank (HSDB)
  • Uses: It is used mainly for the production of fluoropolymers. It reacts with perfluoronitrosoalkanes to produce so-called nitroso rubbers. It is also used in the production of low molecular mass compounds and intermediates, for example, for the manufacture of iodoperfluoroalkanes. Source: Hazardous Substances Data Bank (HSDB)
  • Uses: Principal industrial use of CF2:CF2 is for preparation of polytetrafluoroethylene (Teflon (R)) Resins and copolymers. Source: Hazardous Substances Data Bank (HSDB)
  • Uses: • Manufacture of chemicals and chemical products [Ref: http://www.spin2000.net/spinmyphp/]; • Coating for fishing lines [Ref: CAS2019 (JP01160443)]; • Construction [Ref: http://www.spin2000.net/spinmyphp/]; • Manufacture of radio, television and communication equipment [Ref: http://www.spin2000.net/spinmyphp/]; • Lubricants and additives [Ref: http://www.spin2000.net/spinmyphp/]; • Inert surface in UPLCs [Ref: https://doi.org/10.1039/C9EM00163H]; • Use in lithium batteries [Ref: Kountz, Dennis J., James R. Hoover, and George Martin Pruce. 2015. Li-Ion battery having improved safety agains combustion. EP 2 891 196 B1, issued 2015.]; • Floor polish [Ref: http://www.spin2000.net/spinmyphp/]; • Cosmetics (bronzer, blush, eye shadow, shaving cream (men's), foundation, mascara, facial powder, eye liner, mascara, sunscreen, sunscreen lip balm, sunscreen makeup, anti-aging, oil controller, eye cream, brow liner, concealer) [Ref: Brinch2018, GSP2014]; • Use in printed circuit boards [Ref: CAS2019 (US20030203174)]; • Architechtural membranes [Ref: https://www.bdir.com/projects/tensile-pvdf-membrane-roof-structures-tent-hotel-resort-guizhou-china]; • Reinforcement of fluorinated membranes [Re Source: NORMAN Suspect List Exchange

Mis en correspondance par: Existing checksum-valid CAS to unique PubChem CID match. Récupéré le: 2026-08-31. Ouvrir la fiche source

Les classifications scientifiques et les annotations de danger apportent du contexte et ne remplacent pas la décision réglementaire propre au marché indiquée ci-dessus.

Couverture des sources complémentaires et état des correspondances
SourceRésultatVérifié
NIH PubChem PUG-ViewCorrespondance exacte2026-08-31

Une absence de correspondance enregistrée est une preuve utile que la source a été vérifiée ; ce n’est pas l’affirmation que la substance n’existe pas ailleurs.

Récupéré depuis NIH PubChem le 2026-08-31 par correspondance CAS à somme de contrôle valide. Les propriétés chimiques ne remplacent pas la décision réglementaire de cette page.

Les correspondances directes sont limitées pour cette fiche ; des entrées voisines de l’annexe II sont donc également affichées.

Annexe II 1686
Fiche voisine dans la même annexe

3-methylpyrazole

CAS: 1453-58-3
EC: 215-925-7

Ce que signifie l’annexe II pour Tetrafluoroethylene

Tetrafluoroethylene figure comme substance interdite à l’annexe II du règlement (CE) n° 1223/2009 relatif aux produits cosmétiques et ne doit pas être ajouté intentionnellement. L’article 17 traite séparément des traces involontaires, techniquement inévitables dans le respect des bonnes pratiques de fabrication et compatibles avec l’exigence de sécurité de l’article 3.

Les formulateurs doivent contrôler leurs ingrédients et matières premières afin de s’assurer qu’aucun ne contient cette substance. Les fournisseurs doivent fournir, sur demande, une documentation confirmant son absence.

La page fait également apparaître 12 fiches d’annexe associées présentant des identifiants, une logique d’annexe ou des schémas de dénomination qui se recoupent.

Liste de contrôle de conformité

  • Vérifiez que cette substance est absente de toutes les matières premières et formulations finies.
  • Demandez aux fournisseurs de matières premières une attestation d’absence ou un certificat d’analyse.
  • Consignez le résultat du contrôle dans le dossier d’information produit (DIP).
  • Cette substance a une classification CMR. Examinez le tableau CMR ci-dessus et vérifiez le statut actuel dans les annexes II/III avant toute utilisation.

Questions fréquentes

Oui. Tetrafluoroethylene figure à l’annexe II du règlement (CE) n° 1223/2009 relatif aux produits cosmétiques et est interdit en tant qu’ingrédient cosmétique ajouté intentionnellement. L’article 17 prévoit une exception étroite pour les petites quantités involontaires techniquement inévitables dans le respect des bonnes pratiques de fabrication, à condition que le produit reste sûr au sens de l’article 3.

Le CAS 116-14-3 est l’identifiant numérique unique attribué à Tetrafluoroethylene par le Chemical Abstracts Service. Dans les travaux de conformité cosmétique, le numéro CAS sert à recouper la substance entre les bases de données réglementaires, les spécifications de matières premières et les rapports d’évaluation de la sécurité. Plusieurs entrées d’annexe de l’UE peuvent partager le même numéro CAS si la même substance apparaît dans des conditions différentes ou dans des annexes différentes.

Tetrafluoroethylene a une classification CMR (cancérogène, mutagène ou toxique pour la reproduction) en vertu du règlement CLP de l’UE. Selon l’article 15 du règlement (CE) n° 1223/2009 relatif aux produits cosmétiques, les substances CMR des catégories 1A ou 1B sont interdites dans les cosmétiques, sauf autorisation expresse. Les substances CMR de catégorie 2 ne peuvent être utilisées que si le SCCS les a jugées sûres. Vérifiez toujours le statut actuel dans les annexes et les éventuelles dérogations applicables avant toute utilisation.

Utilisez l’outil Vérificateur INCI de ce site pour coller votre liste complète d’ingrédients (INCI) et l’analyser par rapport à toutes les entrées des annexes II à VI. L’outil met en évidence les ingrédients correspondant à des fiches soumises à restrictions, interdites ou signalées comme allergènes. C’est utile pour un contrôle rapide de conformité des formules de produits finis ou des déclarations de matières premières.

Note de source pour la fiche Tetrafluoroethylene de l’annexe II

Cette page résume une fiche de l’annexe II pour Tetrafluoroethylene à partir de documents publics de la Commission européenne sur les cosmétiques et ajoute les correspondances d’inventaire ou d’identifiants associées lorsqu’elles sont disponibles.

Utilisez cette page de fiche pour examiner les conditions de l’annexe II pour Tetrafluoroethylene, mais confirmez toute décision réglementaire finale auprès du libellé officiel en vigueur de l’annexe et des fichiers sources.

Outils et étapes suivantes

Vérifiez votre formule

Collez une liste INCI complète pour détecter Tetrafluoroethylene et d’autres fiches d’annexe de l’UE signalées en une seule passe.

Vérificateur INCI

Comparer des entrées

Comparez Tetrafluoroethylene côte à côte avec une autre fiche d’annexe pour examiner les différences de restrictions, de concentrations et d’annexe.

Comparer

Parcourir l’annexe

Consultez toutes les fiches de l’annexe II et comparez les conditions réglementaires entre les substances de cette annexe.

Ouvrir l’annexe II