Aller au contenu principal
Annexe II Entrée 150 Modifiée 15 Oct 2010

Succinonitrile

Succinonitrile figure à l’annexe II en tant que substance interdite dans les produits cosmétiques mis sur le marché de l’UE.

Substance interdite— Annexe II, Règlement (CE) n° 1223/2009
Entrée: 150

Détails de la fiche

Nom chimique

Succinonitrile

Informations réglementaires

Règlement

(EC) 2009/1223

Voir toutes les entrées fixées par cet acte

Données clés

Annexe
Numéro d’entrée
150

Identité et propriétés chimiques

Structure chimique 2D PubChem pour le CAS 110-61-2
CAS 110-61-2PubChem CID 8062

Succinonitrile

Succinonitrile appears as colorless to light brown crystals. Colorless waxy solid melting at 57 °C. Highly toxic. — CAMEO Chemicals

Nom IUPAC
butanedinitrile
Formule moléculaire
C4H4N2
Masse moléculaire
80.09 g/mol
Masse exacte
80.037448136 Da
XLogP3
-1,0
Surface polaire topologique
47,6 Ų
Donneurs de liaisons hydrogène
0
Accepteurs de liaisons hydrogène
2
Unités covalentes
1
Stéréocentres définis
0

Également connu sous le nom de

1,2-DicyanoethaneDeprelinSuccinodinitrileDinileEthylene cyanideEthylene dicyanideDicianSuxil
16 autres noms signalés
1,4-ButanedinitrileSuccinilDisuxylEvanexs-DicyanoethaneSuccinic acid nitrileSuccinic dinitrileSuccinic acid dinitrileSukcinonitrilsym-DicyanoethaneUSAF A-9442Ethane, 1,2-dicyano-Dicyanoethane1R479O92DONSC-4852RefChem:186355
Identifiants de bases de données externes

Preuves issues de bases de données scientifiques complémentaires

NIH PubChem PUG-View
Correspondance exacte d’identifiant8062

Attributed physical-property, hazard, environmental and use annotations.

  • First Aid: EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.; SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.; INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) shou Source: CAMEO Chemicals
  • First Aid: (General first aid procedures); Eye: Irrigate immediately - If this chemical contacts the eyes, immediately wash (irrigate) the eyes with large amounts of water, occasionally lifting the lower and upper lids. Get medical attention immediately.; Skin: Water wash immediately - If this chemical contacts the skin, immediately wash the contaminated skin with water. If this chemical penetrates the clothing, immediately remove the clothing and wash the skin with water. If symptoms occur after washing, get medical attention immediately.; Breathing: Respiratory support; Swallow: Medical attention immediately - If this chemical has been swallowed, get medical attention immediately. Source: The National Institute for Occupational Safety and Health (NIOSH)
  • Signal: Danger Source: European Chemicals Agency (ECHA)
  • GHS Hazard Statements: H302 (95%): Harmful if swallowed [Warning Acute toxicity, oral]; H311 (36.2%): Toxic in contact with skin [Danger Acute toxicity, dermal]; H315 (53.8%): Causes skin irritation [Warning Skin corrosion/irritation]; H319 (53.8%): Causes serious eye irritation [Warning Serious eye damage/eye irritation]; H335 (53.8%): May cause respiratory irritation [Warning Specific target organ toxicity, single exposure; Respiratory tract irritation]; H400 (35%): Very toxic to aquatic life [Warning Hazardous to the aquatic environment, acute hazard]; H410 (35%): Very toxic to aquatic life with long lasting effects [Warning Hazardous to the aquatic environment, long-term hazard] Source: European Chemicals Agency (ECHA)
  • Precautionary Statement Codes: P261, P262, P264, P264+P265, P270, P271, P273, P280, P301+P317, P302+P352, P304+P340, P305+P351+P338, P316, P319, P321, P330, P332+P317, P337+P317, P361+P364, P362+P364, P391, P403+P233, P405, and P501 (click each P-code to see the statement) Source: European Chemicals Agency (ECHA)
  • ECHA C&L Notifications Summary: Aggregated GHS information provided per 80 reports by companies from 12 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.; Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website. Source: European Chemicals Agency (ECHA)
  • Health Effects: Exposure to high levels of cyanide for a short time harms the brain and heart and can even cause coma, seizures, apnea, cardiac arrest and death. Chronic inhalation of cyanide causes breathing difficulties, chest pain, vomiting, blood changes, headaches, and enlargement of the thyroid gland. Skin contact with cyanide salts can irritate and produce sores. (L96, L97) Source: Toxin and Toxin Target Database (T3DB)
  • NFPA Health Rating: 2 - Materials that, under emergency conditions, can cause temporary incapacitation or residual injury. Source: Hazardous Substances Data Bank (HSDB)
  • NFPA Fire Rating: 1 - Materials that must be preheated before ignition can occur. Materials require considerable preheating, under all ambient temperature conditions, before ignition and combustion can occur. Source: Hazardous Substances Data Bank (HSDB)
  • NFPA Instability Rating: 0 - Materials that in themselves are normally stable, even under fire conditions. Source: Hazardous Substances Data Bank (HSDB)
  • Toxicity Summary: Organic nitriles decompose into cyanide ions both in vivo and in vitro. Consequently the primary mechanism of toxicity for organic nitriles is their production of toxic cyanide ions or hydrogen cyanide. Cyanide is an inhibitor of cytochrome c oxidase in the fourth complex of the electron transport chain (found in the membrane of the mitochondria of eukaryotic cells). It complexes with the ferric iron atom in this enzyme. The binding of cyanide to this cytochrome prevents transport of electrons from cytochrome c oxidase to oxygen. As a result, the electron transport chain is disrupted and the cell can no longer aerobically produce ATP for energy. Tissues that mainly depend on aerobic respiration, such as the central nervous system and the heart, are particularly affected. Cyanide is also known produce some of its toxic effects by binding to catalase, glutathione peroxidase, methemoglobin, hydroxocobalamin, phosphatase, tyrosinase, ascorbic acid oxidase, xanthine oxidase, succinic dehydrogenase, and Cu/Zn superoxide dismutase. Cyanide binds to the ferric ion of methemoglobin to form inactive cyanmethemoglobin. (L97) Source: Toxin and Toxin Target Database (T3DB)
  • Environmental Bioconcentration: An estimated BCF of 3 was calculated for succinonitrile(SRC), using a log Kow of -0.99(1) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests the potential for bioconcentration in aquatic organisms is low(SRC). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 28(SRC), determined from a structure estimation method(2), indicates that succinonitrile is expected to have very high mobility in soil(SRC). Volatilization of succinonitrile from moist soil surfaces is not expected to be an important fate process(SRC) given an estimated Henry's Law constant of 6.5X10-9 atm-cu m/mole(SRC), derived from its vapor pressure, 0.00778 mm Hg(3), and water solubility, 126.9 g/L(4). Succinonitrile is not expected to volatilize from dry soil surfaces(SRC) based upon a vapor pressure of 0.00778 mm Hg(3). In studies with activated sludge, biodegradation of 1.5-3.8% was observed after 6-24 hours(5). These studies suggest that succinonitrile may have been toxic to the microorganisms, since a high concentration of succinonitrile was used(5). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 28(SRC), determined from a structure estimation method(2), indicates that succinonitrile is not expected to adsorb to suspended solids and sediment(SRC). Volatilization from water surfaces is not expected(3) based upon an estimated Henry's Law constant of 6.5X10-9 atm-cu m/mole(SRC), derived from its vapor pressure, 0.00778 mm Hg(4) and water solubility, 126.9 g/L(5). According to a classification scheme(6), an estimated BCF of 3(SRC), from its log Kow of -0.99(7) and a regression-derived equation(8), suggests the potential for bioconcentration in aquatic organisms is low(SRC). Hydrolysis is not expected to be an important environmental fate process since this compound lacks functional groups that hydrolyze under environmental conditions(9). In studies with activated sludge, biodegradation of 1.5-3.8% was observed after 6-24 hours(10). These studies suggest that succinonitrile may have been toxic to the microorganisms, since a high concentration of succinonitrile was used(10). Source: Hazardous Substances Data Bank (HSDB)
  • Environmental Fate: ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), succinonitrile, which has a vapor pressure of 0.00778 mm Hg at 25 °C(2), is expected to exist solely as a vapor in the ambient atmosphere. The reaction of vapor-phase succinonitrile with photochemically-produced hydroxyl radicals is not expected to be an important environmental fate based on the estimated half-life for this reaction in air of 380 days, calculated from its rate constant of 4.3X10-14 cu cm/molecule-sec at 25 deg (SRC) that was derived using a structure estimation method(3). Succinonitrile is not expected to be susceptible to direct photolysis by sunlight, since it does not contain functional groups that are expected to absorb light with wavelengths >290 nm(SRC). Source: Hazardous Substances Data Bank (HSDB)

Mis en correspondance par: Existing checksum-valid CAS to unique PubChem CID match. Récupéré le: 2026-08-31. Ouvrir la fiche source

Les classifications scientifiques et les annotations de danger apportent du contexte et ne remplacent pas la décision réglementaire propre au marché indiquée ci-dessus.

Couverture des sources complémentaires et état des correspondances
SourceRésultatVérifié
NIH PubChem PUG-ViewCorrespondance exacte2026-08-31

Une absence de correspondance enregistrée est une preuve utile que la source a été vérifiée ; ce n’est pas l’affirmation que la substance n’existe pas ailleurs.

Récupéré depuis NIH PubChem le 2026-09-02 par correspondance CAS à somme de contrôle valide. Les propriétés chimiques ne remplacent pas la décision réglementaire de cette page.

Les correspondances directes sont limitées pour cette fiche ; des entrées voisines de l’annexe II sont donc également affichées.

Annexe II 149
Fiche voisine dans la même annexe

Malononitrile

CAS: 109-77-3
EC: 203-703-2
Annexe II 151
Fiche voisine dans la même annexe

Dinitrophenol isomers

CAS: 51-28-5 / 329-71-5 / 573-56-8 / 25550-58-7
EC: 200-087-7 / 206-348-1 / 209-357-9 / 247-096-2

Ce que signifie l’annexe II pour Succinonitrile

Succinonitrile figure comme substance interdite à l’annexe II du règlement (CE) n° 1223/2009 relatif aux produits cosmétiques et ne doit pas être ajouté intentionnellement. L’article 17 traite séparément des traces involontaires, techniquement inévitables dans le respect des bonnes pratiques de fabrication et compatibles avec l’exigence de sécurité de l’article 3.

Les formulateurs doivent contrôler leurs ingrédients et matières premières afin de s’assurer qu’aucun ne contient cette substance. Les fournisseurs doivent fournir, sur demande, une documentation confirmant son absence.

La page fait également apparaître 12 fiches d’annexe associées présentant des identifiants, une logique d’annexe ou des schémas de dénomination qui se recoupent.

Liste de contrôle de conformité

  • Vérifiez que cette substance est absente de toutes les matières premières et formulations finies.
  • Demandez aux fournisseurs de matières premières une attestation d’absence ou un certificat d’analyse.
  • Consignez le résultat du contrôle dans le dossier d’information produit (DIP).

Questions fréquentes

Oui. Succinonitrile figure à l’annexe II du règlement (CE) n° 1223/2009 relatif aux produits cosmétiques et est interdit en tant qu’ingrédient cosmétique ajouté intentionnellement. L’article 17 prévoit une exception étroite pour les petites quantités involontaires techniquement inévitables dans le respect des bonnes pratiques de fabrication, à condition que le produit reste sûr au sens de l’article 3.

Le CAS 110-61-2 est l’identifiant numérique unique attribué à Succinonitrile par le Chemical Abstracts Service. Dans les travaux de conformité cosmétique, le numéro CAS sert à recouper la substance entre les bases de données réglementaires, les spécifications de matières premières et les rapports d’évaluation de la sécurité. Plusieurs entrées d’annexe de l’UE peuvent partager le même numéro CAS si la même substance apparaît dans des conditions différentes ou dans des annexes différentes.

Utilisez l’outil Vérificateur INCI de ce site pour coller votre liste complète d’ingrédients (INCI) et l’analyser par rapport à toutes les entrées des annexes II à VI. L’outil met en évidence les ingrédients correspondant à des fiches soumises à restrictions, interdites ou signalées comme allergènes. C’est utile pour un contrôle rapide de conformité des formules de produits finis ou des déclarations de matières premières.

Note de source pour la fiche Succinonitrile de l’annexe II

Cette page résume une fiche de l’annexe II pour Succinonitrile à partir de documents publics de la Commission européenne sur les cosmétiques et ajoute les correspondances d’inventaire ou d’identifiants associées lorsqu’elles sont disponibles.

Utilisez cette page de fiche pour examiner les conditions de l’annexe II pour Succinonitrile, mais confirmez toute décision réglementaire finale auprès du libellé officiel en vigueur de l’annexe et des fichiers sources.

Outils et étapes suivantes

Vérifiez votre formule

Collez une liste INCI complète pour détecter Succinonitrile et d’autres fiches d’annexe de l’UE signalées en une seule passe.

Vérificateur INCI

Comparer des entrées

Comparez Succinonitrile côte à côte avec une autre fiche d’annexe pour examiner les différences de restrictions, de concentrations et d’annexe.

Comparer

Parcourir l’annexe

Consultez toutes les fiches de l’annexe II et comparez les conditions réglementaires entre les substances de cette annexe.

Ouvrir l’annexe II